Merge remote-tracking branch 'upstream/master' into taskbar-progress

CONTRIBUTORS.md

@@ -33,6 +33,7 @@ video tutorials.
  - Arturo Castro
  - Chi-kwan Chan
  - TheChocolateOre
+ - Ali Chraghi
  - Joseph Chua
  - Ian Clarkson
  - Michał Cichoń
@@ -126,6 +127,7 @@ video tutorials.
  - lukect
  - Tristam MacDonald
  - Hans Mackowiak
+ - Ramiro Magno
  - Дмитри Малышев
  - Zbigniew Mandziejewicz
  - Adam Marcus
@@ -243,6 +245,7 @@ video tutorials.
  - Torsten Walluhn
  - Patrick Walton
  - Xo Wang
+ - Andre Weissflog
  - Jay Weisskopf
  - Frank Wille
  - Andy Williams

docs/Doxyfile.in

@@ -1,4 +1,4 @@
-# Doxyfile 1.8.18
+# Doxyfile 1.9.5
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -12,6 +12,16 @@
 # For lists, items can also be appended using:
 # TAG += value [value, ...]
 # Values that contain spaces should be placed between quotes (\" \").
+#
+# Note:
+#
+# Use doxygen to compare the used configuration file with the template
+# configuration file:
+# doxygen -x [configFile]
+# Use doxygen to compare the used configuration file with the template
+# configuration file without replacing the environment variables or CMake type
+# replacement variables:
+# doxygen -x_noenv [configFile]
 
 #---------------------------------------------------------------------------
 # Project related configuration options
@@ -60,16 +70,28 @@ PROJECT_LOGO           =
 
 OUTPUT_DIRECTORY       = "@GLFW_BINARY_DIR@/docs"
 
-# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096
-# directories (in 2 levels) under the output directory of each output format and
+# sub-directories (in 2 levels) under the output directory of each output format
-# will distribute the generated files over these directories. Enabling this
+# and will distribute the generated files over these directories. Enabling this
 # option can be useful when feeding doxygen a huge amount of source files, where
 # putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
+# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to
+# control the number of sub-directories.
 # The default value is: NO.
 
 CREATE_SUBDIRS         = NO
 
+# Controls the number of sub-directories that will be created when
+# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every
+# level increment doubles the number of directories, resulting in 4096
+# directories at level 8 which is the default and also the maximum value. The
+# sub-directories are organized in 2 levels, the first level always has a fixed
+# numer of 16 directories.
+# Minimum value: 0, maximum value: 8, default value: 8.
+# This tag requires that the tag CREATE_SUBDIRS is set to YES.
+
+CREATE_SUBDIRS_LEVEL   = 8
+
 # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
 # characters to appear in the names of generated files. If set to NO, non-ASCII
 # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
@@ -81,14 +103,14 @@ ALLOW_UNICODE_NAMES    = NO
 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
 # documentation generated by doxygen is written. Doxygen will use this
 # information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# English messages), Korean, Korean-en (Korean with English messages), Latvian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish,
-# Ukrainian and Vietnamese.
+# Swedish, Turkish, Ukrainian and Vietnamese.
 # The default value is: English.
 
 OUTPUT_LANGUAGE        = English
@@ -209,6 +231,14 @@ QT_AUTOBRIEF           = NO
 
 MULTILINE_CPP_IS_BRIEF = NO
 
+# By default Python docstrings are displayed as preformatted text and doxygen's
+# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the
+# doxygen's special commands can be used and the contents of the docstring
+# documentation blocks is shown as doxygen documentation.
+# The default value is: YES.
+
+PYTHON_DOCSTRING       = YES
+
 # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
 # documentation from any documented member that it re-implements.
 # The default value is: YES.
@@ -232,16 +262,16 @@ TAB_SIZE               = 8
 # the documentation. An alias has the form:
 # name=value
 # For example adding
-# "sideeffect=@par Side Effects:\n"
+# "sideeffect=@par Side Effects:^^"
 # will allow you to put the command \sideeffect (or @sideeffect) in the
 # documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
+# "Side Effects:". Note that you cannot put \n's in the value part of an alias
-# newlines (in the resulting output). You can put ^^ in the value part of an
+# to insert newlines (in the resulting output). You can put ^^ in the value part
-# alias to insert a newline as if a physical newline was in the original file.
+# of an alias to insert a newline as if a physical newline was in the original
-# When you need a literal { or } or , in the value part of an alias you have to
+# file. When you need a literal { or } or , in the value part of an alias you
-# escape them by means of a backslash (\), this can lead to conflicts with the
+# have to escape them by means of a backslash (\), this can lead to conflicts
-# commands \{ and \} for these it is advised to use the version @{ and @} or use
+# with the commands \{ and \} for these it is advised to use the version @{ and
-# a double escape (\\{ and \\})
+# @} or use a double escape (\\{ and \\})
 
 ALIASES                = "thread_safety=@par Thread safety^^" \
                          "pointer_lifetime=@par Pointer lifetime^^" \
@@ -297,8 +327,8 @@ OPTIMIZE_OUTPUT_SLICE  = NO
 # extension. Doxygen has a built-in mapping, but you can override or extend it
 # using this tag. The format is ext=language, where ext is a file extension, and
 # language is one of the parsers supported by doxygen: IDL, Java, JavaScript,
-# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL,
+# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice,
-# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
+# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
 # FortranFree, unknown formatted Fortran: Fortran. In the later case the parser
 # tries to guess whether the code is fixed or free formatted code, this is the
 # default for Fortran type files). For instance to make doxygen treat .inc files
@@ -308,7 +338,10 @@ OPTIMIZE_OUTPUT_SLICE  = NO
 # Note: For files without extension you can use no_extension as a placeholder.
 #
 # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
+# the files are not read by doxygen. When specifying no_extension you should add
+# * to the FILE_PATTERNS.
+#
+# Note see also the list of default file extension mappings.
 
 EXTENSION_MAPPING      =
 
@@ -442,6 +475,19 @@ TYPEDEF_HIDES_STRUCT   = NO
 
 LOOKUP_CACHE_SIZE      = 0
 
+# The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use
+# during processing. When set to 0 doxygen will based this on the number of
+# cores available in the system. You can set it explicitly to a value larger
+# than 0 to get more control over the balance between CPU load and processing
+# speed. At this moment only the input processing can be done using multiple
+# threads. Since this is still an experimental feature the default is set to 1,
+# which effectively disables parallel processing. Please report any issues you
+# encounter. Generating dot graphs in parallel is controlled by the
+# DOT_NUM_THREADS setting.
+# Minimum value: 0, maximum value: 32, default value: 1.
+
+NUM_PROC_THREADS       = 1
+
 #---------------------------------------------------------------------------
 # Build related configuration options
 #---------------------------------------------------------------------------
@@ -505,6 +551,13 @@ EXTRACT_LOCAL_METHODS  = NO
 
 EXTRACT_ANON_NSPACES   = NO
 
+# If this flag is set to YES, the name of an unnamed parameter in a declaration
+# will be determined by the corresponding definition. By default unnamed
+# parameters remain unnamed in the output.
+# The default value is: YES.
+
+RESOLVE_UNNAMED_PARAMS = YES
+
 # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
 # undocumented members inside documented classes or files. If set to NO these
 # members will be included in the various overviews, but no documentation
@@ -542,14 +595,22 @@ HIDE_IN_BODY_DOCS      = NO
 
 INTERNAL_DOCS          = NO
 
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# With the correct setting of option CASE_SENSE_NAMES doxygen will better be
-# names in lower-case letters. If set to YES, upper-case letters are also
+# able to match the capabilities of the underlying filesystem. In case the
-# allowed. This is useful if you have classes or files whose names only differ
+# filesystem is case sensitive (i.e. it supports files in the same directory
-# in case and if your file system supports case sensitive file names. Windows
+# whose names only differ in casing), the option must be set to YES to properly
-# (including Cygwin) ands Mac users are advised to set this option to NO.
+# deal with such files in case they appear in the input. For filesystems that
-# The default value is: system dependent.
+# are not case sensitive the option should be set to NO to properly deal with
+# output files written for symbols that only differ in casing, such as for two
+# classes, one named CLASS and the other named Class, and to also support
+# references to files without having to specify the exact matching casing. On
+# Windows (including Cygwin) and MacOS, users should typically set this option
+# to NO, whereas on Linux or other Unix flavors it should typically be set to
+# YES.
+# Possible values are: SYSTEM, NO and YES.
+# The default value is: SYSTEM.
 
-CASE_SENSE_NAMES       = YES
+CASE_SENSE_NAMES       = SYSTEM
 
 # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
 # their full class and namespace scopes in the documentation. If set to YES, the
@@ -565,6 +626,12 @@ HIDE_SCOPE_NAMES       = NO
 
 HIDE_COMPOUND_REFERENCE= NO
 
+# If the SHOW_HEADERFILE tag is set to YES then the documentation for a class
+# will show which file needs to be included to use the class.
+# The default value is: YES.
+
+SHOW_HEADERFILE        = NO
+
 # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
 # the files that are included by a file in the documentation of that file.
 # The default value is: YES.
@@ -722,7 +789,8 @@ FILE_VERSION_FILTER    =
 # output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option. You can
 # optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
+# will be used as the name of the layout file. See also section "Changing the
+# layout of pages" for information.
 #
 # Note that if you run doxygen from a directory containing a file called
 # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
@@ -768,24 +836,35 @@ WARNINGS               = YES
 WARN_IF_UNDOCUMENTED   = YES
 
 # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
+# potential errors in the documentation, such as documenting some parameters in
-# in a documented function, or documenting parameters that don't exist or using
+# a documented function twice, or documenting parameters that don't exist or
-# markup commands wrongly.
+# using markup commands wrongly.
 # The default value is: YES.
 
 WARN_IF_DOC_ERROR      = YES
 
+# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete
+# function parameter documentation. If set to NO, doxygen will accept that some
+# parameters have no documentation without warning.
+# The default value is: YES.
+
+WARN_IF_INCOMPLETE_DOC = YES
+
 # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
 # are documented, but have no documentation for their parameters or return
-# value. If set to NO, doxygen will only warn about wrong or incomplete
+# value. If set to NO, doxygen will only warn about wrong parameter
-# parameter documentation, but not about the absence of documentation. If
+# documentation, but not about the absence of documentation. If EXTRACT_ALL is
-# EXTRACT_ALL is set to YES then this flag will automatically be disabled.
+# set to YES then this flag will automatically be disabled. See also
+# WARN_IF_INCOMPLETE_DOC
 # The default value is: NO.
 
 WARN_NO_PARAMDOC       = YES
 
 # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
-# a warning is encountered.
+# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS
+# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
+# at the end of the doxygen process doxygen will return with a non-zero status.
+# Possible values are: NO, YES and FAIL_ON_WARNINGS.
 # The default value is: NO.
 
 WARN_AS_ERROR          = NO
@@ -796,13 +875,27 @@ WARN_AS_ERROR          = NO
 # and the warning text. Optionally the format may contain $version, which will
 # be replaced by the version of the file (if it could be obtained via
 # FILE_VERSION_FILTER)
+# See also: WARN_LINE_FORMAT
 # The default value is: $file:$line: $text.
 
 WARN_FORMAT            = "$file:$line: $text"
 
+# In the $text part of the WARN_FORMAT command it is possible that a reference
+# to a more specific place is given. To make it easier to jump to this place
+# (outside of doxygen) the user can define a custom "cut" / "paste" string.
+# Example:
+# WARN_LINE_FORMAT = "'vi $file +$line'"
+# See also: WARN_FORMAT
+# The default value is: at line $line of file $file.
+
+WARN_LINE_FORMAT       = "at line $line of file $file"
+
 # The WARN_LOGFILE tag can be used to specify a file to which warning and error
 # messages should be written. If left blank the output is written to standard
-# error (stderr).
+# error (stderr). In case the file specified cannot be opened for writing the
+# warning and error messages are written to standard error. When as file - is
+# specified the warning and error messages are written to standard output
+# (stdout).
 
 WARN_LOGFILE           = "@GLFW_BINARY_DIR@/docs/warnings.txt"
 
@@ -821,12 +914,23 @@ INPUT                  = @GLFW_DOXYGEN_INPUT@
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
+# documentation (see:
-# possible encodings.
+# https://www.gnu.org/software/libiconv/) for the list of possible encodings.
+# See also: INPUT_FILE_ENCODING
 # The default value is: UTF-8.
 
 INPUT_ENCODING         = UTF-8
 
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses The INPUT_FILE_ENCODING tag can be used to specify
+# character encoding on a per file pattern basis. Doxygen will compare the file
+# name with each pattern and apply the encoding instead of the default
+# INPUT_ENCODING) if there is a match. The character encodings are a list of the
+# form: pattern=encoding (like *.php=ISO-8859-1). See cfg_input_encoding
+# "INPUT_ENCODING" for further information on supported encodings.
+
+INPUT_FILE_ENCODING    =
+
 # If the value of the INPUT tag contains directories, you can use the
 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
 # *.h) to filter out the source-files in the directories.
@@ -835,12 +939,14 @@ INPUT_ENCODING         = UTF-8
 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
 # read by doxygen.
 #
+# Note the list of default checked file patterns might differ from the list of
+# default file extension mappings.
+#
 # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
 # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
-# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
+# *.hh, *.hxx, *.hpp, *.h++, *.l, *.cs, *.d, *.php, *.php4, *.php5, *.phtml,
-# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment),
+# *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C
-# *.doc (to be provided as doxygen C comment), *.txt (to be provided as doxygen
+# comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd,
-# C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd,
 # *.vhdl, *.ucf, *.qsf and *.ice.
 
 FILE_PATTERNS          = *.h *.dox
@@ -880,7 +986,7 @@ EXCLUDE_PATTERNS       =
 # (namespaces, classes, functions, etc.) that should be excluded from the
 # output. The symbol name can be a fully qualified name, a word, or if the
 # wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
+# ANamespace::AClass, ANamespace::*Test
 #
 # Note that the wildcards are matched against the file with absolute path, so to
 # exclude all test directories use the pattern */test/*
@@ -928,6 +1034,11 @@ IMAGE_PATH             =
 # code is scanned, but not when the output code is generated. If lines are added
 # or removed, the anchors will not be placed correctly.
 #
+# Note that doxygen will use the data processed and written to standard output
+# for further processing, therefore nothing else, like debug statements or used
+# commands (so in case of a Windows batch file always use @echo OFF), should be
+# written to standard output.
+#
 # Note that for custom extensions or not directly supported extensions you also
 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
 # properly processed by doxygen.
@@ -969,6 +1080,15 @@ FILTER_SOURCE_PATTERNS =
 
 USE_MDFILE_AS_MAINPAGE =
 
+# The Fortran standard specifies that for fixed formatted Fortran code all
+# characters from position 72 are to be considered as comment. A common
+# extension is to allow longer lines before the automatic comment starts. The
+# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can
+# be processed before the automatic comment starts.
+# Minimum value: 7, maximum value: 10000, default value: 72.
+
+FORTRAN_COMMENT_AFTER  = 72
+
 #---------------------------------------------------------------------------
 # Configuration options related to source browsing
 #---------------------------------------------------------------------------
@@ -1163,9 +1283,26 @@ HTML_EXTRA_STYLESHEET  = "@GLFW_SOURCE_DIR@/docs/extra.css"
 
 HTML_EXTRA_FILES       = "@GLFW_SOURCE_DIR@/docs/spaces.svg"
 
+# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output
+# should be rendered with a dark or light theme. Default setting AUTO_LIGHT
+# enables light output unless the user preference is dark output. Other options
+# are DARK to always use dark mode, LIGHT to always use light mode, AUTO_DARK to
+# default to dark mode unless the user prefers light mode, and TOGGLE to let the
+# user toggle between dark and light mode via a button.
+# Possible values are: LIGHT Always generate light output., DARK Always generate
+# dark output., AUTO_LIGHT Automatically set the mode according to the user
+# preference, use light mode if no preference is set (the default)., AUTO_DARK
+# Automatically set the mode according to the user preference, use dark mode if
+# no preference is set. and TOGGLE Allow to user to switch between light and
+# dark mode via a button..
+# The default value is: AUTO_LIGHT.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE        = LIGHT
+
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the style sheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
+# this color. Hue is specified as an angle on a color-wheel, see
 # https://en.wikipedia.org/wiki/Hue for more information. For instance the value
 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
 # purple, and 360 is red again.
@@ -1175,7 +1312,7 @@ HTML_EXTRA_FILES       = "@GLFW_SOURCE_DIR@/docs/spaces.svg"
 HTML_COLORSTYLE_HUE    = 220
 
 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
+# in the HTML output. For a value of 0 the output will use gray-scales only. A
 # value of 255 will produce the most vivid colors.
 # Minimum value: 0, maximum value: 255, default value: 100.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1236,10 +1373,11 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: https://developer.apple.com/xcode/), introduced with OSX
+# environment (see:
-# 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To
-# Makefile in the HTML output directory. Running make will produce the docset in
+# create a documentation set, doxygen will generate a Makefile in the HTML
-# that directory and running make install will install the docset in
+# output directory. Running make will produce the docset in that directory and
+# running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
 # startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy
 # genXcode/_index.html for more information.
@@ -1256,6 +1394,13 @@ GENERATE_DOCSET        = NO
 
 DOCSET_FEEDNAME        = "Doxygen generated docs"
 
+# This tag determines the URL of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDURL         =
+
 # This tag specifies a string that should uniquely identify the documentation
 # set bundle. This should be a reverse domain-name style string, e.g.
 # com.mycompany.MyDocSet. Doxygen will append .docset to the name.
@@ -1281,8 +1426,12 @@ DOCSET_PUBLISHER_NAME  = Publisher
 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
 # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# on Windows. In the beginning of 2021 Microsoft took the original page, with
-# Windows.
+# a.o. the download links, offline the HTML help workshop was already many years
+# in maintenance mode). You can download the HTML help workshop from the web
+# archives at Installation executable (see:
+# http://web.archive.org/web/20160201063255/http://download.microsoft.com/downlo
+# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe).
 #
 # The HTML Help Workshop contains a compiler that can convert all HTML output
 # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
@@ -1312,7 +1461,7 @@ CHM_FILE               =
 HHC_LOCATION           =
 
 # The GENERATE_CHI flag controls if a separate .chi index file is generated
-# (YES) or that it should be included in the master .chm file (NO).
+# (YES) or that it should be included in the main .chm file (NO).
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
 
@@ -1357,7 +1506,8 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
+# (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1365,8 +1515,8 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-
+# Folders (see:
-# folders).
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1374,16 +1524,16 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# Filters (see:
-# filters).
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# Filters (see:
-# filters).
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_ATTRS  =
@@ -1395,9 +1545,9 @@ QHP_CUST_FILTER_ATTRS  =
 
 QHP_SECT_FILTER_ATTRS  =
 
-# The QHG_LOCATION tag can be used to specify the location of Qt's
+# The QHG_LOCATION tag can be used to specify the location (absolute path
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to
-# generated .qhp file.
+# run qhelpgenerator on the generated .qhp file.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHG_LOCATION           =
@@ -1440,16 +1590,28 @@ DISABLE_INDEX          = NO
 # to work a browser that supports JavaScript, DHTML, CSS and frames is required
 # (i.e. any modern browser). Windows users are probably better off using the
 # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
+# further fine tune the look of the index (see "Fine-tuning the output"). As an
-# sheet generated by doxygen has an example that shows how to put an image at
+# example, the default style sheet generated by doxygen has an example that
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# shows how to put an image at the root of the tree instead of the PROJECT_NAME.
-# the same information as the tab index, you could consider setting
+# Since the tree basically has the same information as the tab index, you could
-# DISABLE_INDEX to YES when enabling this option.
+# consider setting DISABLE_INDEX to YES when enabling this option.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
 GENERATE_TREEVIEW      = NO
 
+# When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the
+# FULL_SIDEBAR option determines if the side bar is limited to only the treeview
+# area (value NO) or if it should extend to the full height of the window (value
+# YES). Setting this to YES gives a layout similar to
+# https://docs.readthedocs.io with more room for contents, but less room for the
+# project logo, title, and description. If either GENERATE_TREEVIEW or
+# DISABLE_INDEX is set to NO, this option has no effect.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FULL_SIDEBAR           = NO
+
 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
 # doxygen will group on one line in the generated HTML documentation.
 #
@@ -1474,12 +1636,19 @@ TREEVIEW_WIDTH         = 300
 
 EXT_LINKS_IN_WINDOW    = NO
 
+# If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email
+# addresses.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+OBFUSCATE_EMAILS       = YES
+
 # If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg
 # tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see
 # https://inkscape.org) to generate formulas as SVG images instead of PNGs for
 # the HTML output. These images will generally look nicer at scaled resolutions.
-# Possible values are: png The default and svg Looks nicer but requires the
+# Possible values are: png (the default) and svg (looks nicer but requires the
-# pdf2svg tool.
+# pdf2svg or inkscape tool).
 # The default value is: png.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
@@ -1494,17 +1663,6 @@ HTML_FORMULA_FORMAT    = png
 
 FORMULA_FONTSIZE       = 10
 
-# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
 # The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands
 # to create new LaTeX commands to be used in formulas as building blocks. See
 # the section "Including formulas" for details.
@@ -1522,11 +1680,29 @@ FORMULA_MACROFILE      =
 
 USE_MATHJAX            = NO
 
+# With MATHJAX_VERSION it is possible to specify the MathJax version to be used.
+# Note that the different versions of MathJax have different requirements with
+# regards to the different settings, so it is possible that also other MathJax
+# settings have to be changed when switching between the different MathJax
+# versions.
+# Possible values are: MathJax_2 and MathJax_3.
+# The default value is: MathJax_2.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_VERSION        = MathJax_2
+
 # When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
+# the MathJax output. For more details about the output format see MathJax
-# http://docs.mathjax.org/en/latest/output.html) for more details.
+# version 2 (see:
+# http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3
+# (see:
+# http://docs.mathjax.org/en/latest/web/components/output.html).
 # Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
+# compatibility. This is the name for Mathjax version 2, for MathJax version 3
+# this will be translated into chtml), NativeMML (i.e. MathML. Only supported
+# for NathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This
+# is the name for Mathjax version 3, for MathJax version 2 this will be
+# translated into HTML-CSS) and SVG.
 # The default value is: HTML-CSS.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
@@ -1539,22 +1715,29 @@ MATHJAX_FORMAT         = HTML-CSS
 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from https://www.mathjax.org before deployment.
+# MathJax from https://www.mathjax.org before deployment. The default value is:
-# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2.
+# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2
+# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
-MATHJAX_RELPATH        = https://cdn.jsdelivr.net/npm/mathjax@2
+MATHJAX_RELPATH        =
 
 # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
 # extension names that should be enabled during MathJax rendering. For example
+# for MathJax version 2 (see
+# https://docs.mathjax.org/en/v2.7-latest/tex.html#tex-and-latex-extensions):
 # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# For example for MathJax version 3 (see
+# http://docs.mathjax.org/en/latest/input/tex/extensions/index.html):
+# MATHJAX_EXTENSIONS = ams
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
 MATHJAX_EXTENSIONS     =
 
 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
 # of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# (see:
+# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an
 # example see the documentation.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
@@ -1601,7 +1784,8 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/).
+# Xapian (see:
+# https://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1614,8 +1798,9 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/). See the section "External Indexing and
+# Xapian (see:
-# Searching" for details.
+# https://xapian.org/). See the section "External Indexing and Searching" for
+# details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
 SEARCHENGINE_URL       =
@@ -1724,29 +1909,31 @@ PAPER_TYPE             = a4
 
 EXTRA_PACKAGES         =
 
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for
-# generated LaTeX document. The header should contain everything until the first
+# the generated LaTeX document. The header should contain everything until the
-# chapter. If it is left blank doxygen will generate a standard header. See
+# first chapter. If it is left blank doxygen will generate a standard header. It
-# section "Doxygen usage" for information on how to let doxygen write the
+# is highly recommended to start with a default header using
-# default header to a separate file.
+# doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty
+# and then modify the file new_header.tex. See also section "Doxygen usage" for
+# information on how to generate the default header that doxygen normally uses.
 #
-# Note: Only use a user-defined header if you know what you are doing! The
+# Note: Only use a user-defined header if you know what you are doing!
-# following commands have a special meaning inside the header: $title,
+# Note: The header is subject to change so you typically have to regenerate the
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# default header when upgrading to a newer version of doxygen. The following
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# commands have a special meaning inside the header (and footer): For a
-# string, for the replacement values of the other commands the user is referred
+# description of the possible markers and block names see the documentation.
-# to HTML_HEADER.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
 LATEX_HEADER           =
 
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for
-# generated LaTeX document. The footer should contain everything after the last
+# the generated LaTeX document. The footer should contain everything after the
-# chapter. If it is left blank doxygen will generate a standard footer. See
+# last chapter. If it is left blank doxygen will generate a standard footer. See
 # LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
+# special commands can be used inside the footer. See also section "Doxygen
-#
+# usage" for information on how to generate the default footer that doxygen
-# Note: Only use a user-defined footer if you know what you are doing!
+# normally uses. Note: Only use a user-defined footer if you know what you are
+# doing!
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
 LATEX_FOOTER           =
@@ -1779,9 +1966,11 @@ LATEX_EXTRA_FILES      =
 
 PDF_HYPERLINKS         = YES
 
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as
-# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX
-# higher quality PDF documentation.
+# files. Set this option to YES, to get a higher quality PDF documentation.
+#
+# See also section LATEX_CMD_NAME for selecting the engine.
 # The default value is: YES.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1789,8 +1978,7 @@ USE_PDFLATEX           = YES
 
 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
 # command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
+# if errors occur, instead of asking the user for help.
-# when generating formulas in HTML.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -2065,7 +2253,8 @@ SEARCH_INCLUDES        = YES
 
 # The INCLUDE_PATH tag can be used to specify one or more directories that
 # contain include files that are not input files but should be processed by the
-# preprocessor.
+# preprocessor. Note that the INCLUDE_PATH is not recursive, so the setting of
+# RECURSIVE has no effect here.
 # This tag requires that the tag SEARCH_INCLUDES is set to YES.
 
 INCLUDE_PATH           =
@@ -2199,35 +2388,50 @@ HAVE_DOT               = NO
 
 DOT_NUM_THREADS        = 0
 
-# When you want a differently looking font in the dot files that doxygen
+# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of
-# generates you can specify the font name using DOT_FONTNAME. You need to make
+# subgraphs. When you want a differently looking font in the dot files that
-# sure dot is able to find the font, which can be done by putting it in a
+# doxygen generates you can specify fontname, fontcolor and fontsize attributes.
-# standard location or by setting the DOTFONTPATH environment variable or by
+# For details please see <a href=https://graphviz.org/doc/info/attrs.html>Node,
-# setting DOT_FONTPATH to the directory containing the font.
+# Edge and Graph Attributes specification</a> You need to make sure dot is able
-# The default value is: Helvetica.
+# to find the font, which can be done by putting it in a standard location or by
+# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font. Default graphviz fontsize is 14.
+# The default value is: fontname=Helvetica,fontsize=10.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
-DOT_FONTNAME           = Helvetica
+DOT_COMMON_ATTR        = "fontname=Helvetica,fontsize=10"
 
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can
-# dot graphs.
+# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. <a
-# Minimum value: 4, maximum value: 24, default value: 10.
+# href=https://graphviz.org/doc/info/arrows.html>Complete documentation about
+# arrows shapes.</a>
+# The default value is: labelfontname=Helvetica,labelfontsize=10.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
-DOT_FONTSIZE           = 10
+DOT_EDGE_ATTR          = "labelfontname=Helvetica,labelfontsize=10"
 
-# By default doxygen will tell dot to use the default font as specified with
+# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# around nodes set 'shape=plain' or 'shape=plaintext' <a
-# the path where dot can find it using this tag.
+# href=https://www.graphviz.org/doc/info/shapes.html>Shapes specification</a>
+# The default value is: shape=box,height=0.2,width=0.4.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NODE_ATTR          = "shape=box,height=0.2,width=0.4"
+
+# You can set the path where dot can find font specified with fontname in
+# DOT_COMMON_ATTR and others dot attributes.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
 DOT_FONTPATH           =
 
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# If the CLASS_GRAPH tag is set to YES (or GRAPH) then doxygen will generate a
-# each documented class showing the direct and indirect inheritance relations.
+# graph for each documented class showing the direct and indirect inheritance
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# relations. In case HAVE_DOT is set as well dot will be used to draw the graph,
+# otherwise the built-in generator will be used. If the CLASS_GRAPH tag is set
+# to TEXT the direct and indirect inheritance relations will be shown as texts /
+# links.
+# Possible values are: NO, YES, TEXT and GRAPH.
 # The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
 
 CLASS_GRAPH            = YES
 
@@ -2241,7 +2445,8 @@ CLASS_GRAPH            = YES
 COLLABORATION_GRAPH    = YES
 
 # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
+# groups, showing the direct groups dependencies. See also the chapter Grouping
+# in the manual.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2264,10 +2469,32 @@ UML_LOOK               = NO
 # but if the number exceeds 15, the total amount of fields shown is limited to
 # 10.
 # Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
+# This tag requires that the tag UML_LOOK is set to YES.
 
 UML_LIMIT_NUM_FIELDS   = 10
 
+# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and
+# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS
+# tag is set to YES, doxygen will add type and arguments for attributes and
+# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen
+# will not generate fields with class member information in the UML graphs. The
+# class diagrams will look similar to the default class diagrams but using UML
+# notation for the relationships.
+# Possible values are: NO, YES and NONE.
+# The default value is: NO.
+# This tag requires that the tag UML_LOOK is set to YES.
+
+DOT_UML_DETAILS        = NO
+
+# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters
+# to display on a single line. If the actual line length exceeds this threshold
+# significantly it will wrapped across multiple lines. Some heuristics are apply
+# to avoid ugly line breaks.
+# Minimum value: 0, maximum value: 1000, default value: 17.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_WRAP_THRESHOLD     = 17
+
 # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
 # collaboration graphs will show the relations between templates and their
 # instances.
@@ -2334,6 +2561,13 @@ GRAPHICAL_HIERARCHY    = YES
 
 DIRECTORY_GRAPH        = YES
 
+# The DIR_GRAPH_MAX_DEPTH tag can be used to limit the maximum number of levels
+# of child directories generated in directory dependency graphs by dot.
+# Minimum value: 1, maximum value: 25, default value: 1.
+# This tag requires that the tag DIRECTORY_GRAPH is set to YES.
+
+DIR_GRAPH_MAX_DEPTH    = 1
+
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
 # generated by dot. For an explanation of the image formats see the section
 # output formats in the documentation of the dot tool (Graphviz (see:
@@ -2387,10 +2621,10 @@ MSCFILE_DIRS           =
 DIAFILE_DIRS           =
 
 # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
+# path where java can find the plantuml.jar file or to the filename of jar file
-# PlantUML is not used or called during a preprocessing step. Doxygen will
+# to be used. If left blank, it is assumed PlantUML is not used or called during
-# generate a warning when it encounters a \startuml command in this case and
+# a preprocessing step. Doxygen will generate a warning when it encounters a
-# will not generate output for the diagram.
+# \startuml command in this case and will not generate output for the diagram.
 
 PLANTUML_JAR_PATH      =
 
@@ -2428,18 +2662,6 @@ DOT_GRAPH_MAX_NODES    = 50
 
 MAX_DOT_GRAPH_DEPTH    = 0
 
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = NO
-
 # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
 # files in one run (i.e. multiple -o and -T options on the command line). This
 # makes dot run faster, but since only newer versions of dot (>1.8.10) support
@@ -2452,14 +2674,18 @@ DOT_MULTI_TARGETS      = NO
 # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
 # explaining the meaning of the various boxes and arrows in the dot generated
 # graphs.
+# Note: This tag requires that UML_LOOK isn't set, i.e. the doxygen internal
+# graphical representation for inheritance and collaboration diagrams is used.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
 GENERATE_LEGEND        = YES
 
-# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate
 # files that are used to generate the various graphs.
+#
+# Note: This setting is not only used for dot files but also for msc temporary
+# files.
 # The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
 
 DOT_CLEANUP            = YES

docs/window.dox

@@ -497,7 +497,8 @@ should also declare this in its `Info.plist` by setting the
 @anchor GLFW_X11_CLASS_NAME_hint
 @anchor GLFW_X11_INSTANCE_NAME_hint
 __GLFW_X11_CLASS_NAME__ and __GLFW_X11_INSTANCE_NAME__ specifies the desired
-ASCII encoded class and instance parts of the ICCCM `WM_CLASS` window property.
+ASCII encoded class and instance parts of the ICCCM `WM_CLASS` window property.  Both
+hints need to be set to something other than an empty string for them to take effect.
 These are set with @ref glfwWindowHintString.
 
 @subsubsection window_hints_wayland Wayland specific window hints

include/GLFW/glfw3.h

@@ -2841,11 +2841,11 @@ GLFWAPI const GLFWvidmode* glfwGetVideoMode(GLFWmonitor* monitor);
  *  @param[in] monitor The monitor whose gamma ramp to set.
  *  @param[in] gamma The desired exponent.
  *
- *  @errors Possible errors include @ref GLFW_NOT_INITIALIZED, @ref
+ *  @errors Possible errors include @ref GLFW_NOT_INITIALIZED, @ref GLFW_INVALID_VALUE,
- *  GLFW_INVALID_VALUE and @ref GLFW_PLATFORM_ERROR.
+ *  @ref GLFW_PLATFORM_ERROR and @ref GLFW_FEATURE_UNAVAILABLE (see remarks).
  *
  *  @remark @wayland Gamma handling is a privileged protocol, this function
- *  will thus never be implemented and emits @ref GLFW_PLATFORM_ERROR.
+ *  will thus never be implemented and emits @ref GLFW_FEATURE_UNAVAILABLE.
  *
  *  @thread_safety This function must only be called from the main thread.
  *
@@ -2865,11 +2865,11 @@ GLFWAPI void glfwSetGamma(GLFWmonitor* monitor, float gamma);
  *  @return The current gamma ramp, or `NULL` if an
  *  [error](@ref error_handling) occurred.
  *
- *  @errors Possible errors include @ref GLFW_NOT_INITIALIZED and @ref
+ *  @errors Possible errors include @ref GLFW_NOT_INITIALIZED, @ref GLFW_PLATFORM_ERROR
- *  GLFW_PLATFORM_ERROR.
+ *  and @ref GLFW_FEATURE_UNAVAILABLE (see remarks).
  *
  *  @remark @wayland Gamma handling is a privileged protocol, this function
- *  will thus never be implemented and emits @ref GLFW_PLATFORM_ERROR while
+ *  will thus never be implemented and emits @ref GLFW_FEATURE_UNAVAILABLE while
  *  returning `NULL`.
  *
  *  @pointer_lifetime The returned structure and its arrays are allocated and
@@ -2904,8 +2904,8 @@ GLFWAPI const GLFWgammaramp* glfwGetGammaRamp(GLFWmonitor* monitor);
  *  @param[in] monitor The monitor whose gamma ramp to set.
  *  @param[in] ramp The gamma ramp to use.
  *
- *  @errors Possible errors include @ref GLFW_NOT_INITIALIZED and @ref
+ *  @errors Possible errors include @ref GLFW_NOT_INITIALIZED, @ref GLFW_PLATFORM_ERROR
- *  GLFW_PLATFORM_ERROR.
+ *  and @ref GLFW_FEATURE_UNAVAILABLE (see remarks).
  *
  *  @remark The size of the specified gamma ramp should match the size of the
  *  current ramp for that monitor.
@@ -2913,7 +2913,7 @@ GLFWAPI const GLFWgammaramp* glfwGetGammaRamp(GLFWmonitor* monitor);
  *  @remark @win32 The gamma ramp size must be 256.
  *
  *  @remark @wayland Gamma handling is a privileged protocol, this function
- *  will thus never be implemented and emits @ref GLFW_PLATFORM_ERROR.
+ *  will thus never be implemented and emits @ref GLFW_FEATURE_UNAVAILABLE.
  *
  *  @pointer_lifetime The specified gamma ramp is copied before this function
  *  returns.
@@ -4038,7 +4038,8 @@ GLFWAPI int glfwGetWindowAttrib(GLFWwindow* window, int attrib);
  *  @param[in] value `GLFW_TRUE` or `GLFW_FALSE`.
  *
  *  @errors Possible errors include @ref GLFW_NOT_INITIALIZED, @ref
- *  GLFW_INVALID_ENUM, @ref GLFW_INVALID_VALUE and @ref GLFW_PLATFORM_ERROR.
+ *  GLFW_INVALID_ENUM, @ref GLFW_INVALID_VALUE, @ref GLFW_PLATFORM_ERROR and @ref
+ *  GLFW_FEATURE_UNAVAILABLE.
  *
  *  @remark Calling @ref glfwGetWindowAttrib will always return the latest
  *  value, even if that value is ignored by the current mode of the window.
@@ -4889,11 +4890,11 @@ GLFWAPI void glfwGetCursorPos(GLFWwindow* window, double* xpos, double* ypos);
  *  @param[in] ypos The desired y-coordinate, relative to the top edge of the
  *  content area.
  *
- *  @errors Possible errors include @ref GLFW_NOT_INITIALIZED and @ref
+ *  @errors Possible errors include @ref GLFW_NOT_INITIALIZED, @ref
- *  GLFW_PLATFORM_ERROR.
+ *  GLFW_PLATFORM_ERROR and @ref GLFW_FEATURE_UNAVAILABLE (see remarks).
  *
  *  @remark @wayland This function will only work when the cursor mode is
- *  `GLFW_CURSOR_DISABLED`, otherwise it will do nothing.
+ *  `GLFW_CURSOR_DISABLED`, otherwise it will emit @ref GLFW_FEATURE_UNAVAILABLE.
  *
  *  @thread_safety This function must only be called from the main thread.
  *

src/cocoa_init.m

@@ -27,6 +27,9 @@
 //========================================================================
 
 #include "internal.h"
+
+#if defined(_GLFW_COCOA)
+
 #include <sys/param.h> // For MAXPATHLEN
 
 // Needed for _NSGetProgname
@@ -691,3 +694,5 @@ void _glfwTerminateCocoa(void)
     } // autoreleasepool
 }
 
+#endif // _GLFW_COCOA
+

src/cocoa_joystick.h

@@ -31,8 +31,6 @@
 #define GLFW_COCOA_JOYSTICK_STATE         _GLFWjoystickNS ns;
 #define GLFW_COCOA_LIBRARY_JOYSTICK_STATE
 
-#define GLFW_BUILD_COCOA_MAPPINGS
-
 // Cocoa-specific per-joystick data
 //
 typedef struct _GLFWjoystickNS

src/cocoa_joystick.m

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_COCOA)
+
 #include <unistd.h>
 #include <ctype.h>
 #include <string.h>
@@ -476,3 +478,5 @@ void _glfwUpdateGamepadGUIDCocoa(char* guid)
     }
 }
 
+#endif // _GLFW_COCOA
+

src/cocoa_monitor.m

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_COCOA)
+
 #include <stdlib.h>
 #include <limits.h>
 #include <math.h>
@@ -625,3 +627,5 @@ GLFWAPI CGDirectDisplayID glfwGetCocoaMonitor(GLFWmonitor* handle)
     return monitor->ns.displayID;
 }
 
+#endif // _GLFW_COCOA
+

src/cocoa_time.c

@@ -28,6 +28,8 @@
 
 #include "internal.h"
 
+#if defined(GLFW_BUILD_COCOA_TIMER)
+
 #include <mach/mach_time.h>
 
 
@@ -53,3 +55,5 @@ uint64_t _glfwPlatformGetTimerFrequency(void)
     return _glfw.timer.ns.frequency;
 }
 
+#endif // GLFW_BUILD_COCOA_TIMER
+

src/cocoa_window.m

@@ -28,6 +28,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_COCOA)
+
 #include <float.h>
 #include <string.h>
 
@@ -2053,3 +2055,5 @@ GLFWAPI id glfwGetCocoaWindow(GLFWwindow* handle)
     return window->ns.object;
 }
 
+#endif // _GLFW_COCOA
+

src/egl_context.c

@@ -88,13 +88,30 @@ static int getEGLConfigAttrib(EGLConfig config, int attrib)
 // Return the EGLConfig most closely matching the specified hints
 //
 static GLFWbool chooseEGLConfig(const _GLFWctxconfig* ctxconfig,
-                                const _GLFWfbconfig* desired,
+                                const _GLFWfbconfig* fbconfig,
                                 EGLConfig* result)
 {
     EGLConfig* nativeConfigs;
     _GLFWfbconfig* usableConfigs;
     const _GLFWfbconfig* closest;
-    int i, nativeCount, usableCount;
+    int i, nativeCount, usableCount, apiBit;
+    GLFWbool wrongApiAvailable = GLFW_FALSE;
+
+    if (ctxconfig->client == GLFW_OPENGL_ES_API)
+    {
+        if (ctxconfig->major == 1)
+            apiBit = EGL_OPENGL_ES_BIT;
+        else
+            apiBit = EGL_OPENGL_ES2_BIT;
+    }
+    else
+        apiBit = EGL_OPENGL_BIT;
+
+    if (fbconfig->stereo)
+    {
+        _glfwInputError(GLFW_FORMAT_UNAVAILABLE, "EGL: Stereo rendering not supported");
+        return GLFW_FALSE;
+    }
 
     eglGetConfigs(_glfw.egl.display, NULL, 0, &nativeCount);
     if (!nativeCount)
@@ -132,7 +149,7 @@ static GLFWbool chooseEGLConfig(const _GLFWctxconfig* ctxconfig,
             if (!vi.visualid)
                 continue;
 
-            if (desired->transparent)
+            if (fbconfig->transparent)
             {
                 int count;
                 XVisualInfo* vis =
@@ -146,23 +163,10 @@ static GLFWbool chooseEGLConfig(const _GLFWctxconfig* ctxconfig,
         }
 #endif // _GLFW_X11
 
-        if (ctxconfig->client == GLFW_OPENGL_ES_API)
+        if (!(getEGLConfigAttrib(n, EGL_RENDERABLE_TYPE) & apiBit))
         {
-            if (ctxconfig->major == 1)
+            wrongApiAvailable = GLFW_TRUE;
-            {
+            continue;
-                if (!(getEGLConfigAttrib(n, EGL_RENDERABLE_TYPE) & EGL_OPENGL_ES_BIT))
-                    continue;
-            }
-            else
-            {
-                if (!(getEGLConfigAttrib(n, EGL_RENDERABLE_TYPE) & EGL_OPENGL_ES2_BIT))
-                    continue;
-            }
-        }
-        else if (ctxconfig->client == GLFW_OPENGL_API)
-        {
-            if (!(getEGLConfigAttrib(n, EGL_RENDERABLE_TYPE) & EGL_OPENGL_BIT))
-                continue;
         }
 
         u->redBits = getEGLConfigAttrib(n, EGL_RED_SIZE);
@@ -182,22 +186,51 @@ static GLFWbool chooseEGLConfig(const _GLFWctxconfig* ctxconfig,
             //       with an alpha channel to ensure the buffer is opaque
             if (!_glfw.egl.EXT_present_opaque)
             {
-                if (!desired->transparent && u->alphaBits > 0)
+                if (!fbconfig->transparent && u->alphaBits > 0)
                     continue;
             }
         }
 #endif // _GLFW_WAYLAND
 
         u->samples = getEGLConfigAttrib(n, EGL_SAMPLES);
-        u->doublebuffer = desired->doublebuffer;
+        u->doublebuffer = fbconfig->doublebuffer;
 
         u->handle = (uintptr_t) n;
         usableCount++;
     }
 
-    closest = _glfwChooseFBConfig(desired, usableConfigs, usableCount);
+    closest = _glfwChooseFBConfig(fbconfig, usableConfigs, usableCount);
     if (closest)
         *result = (EGLConfig) closest->handle;
+    else
+    {
+        if (wrongApiAvailable)
+        {
+            if (ctxconfig->client == GLFW_OPENGL_ES_API)
+            {
+                if (ctxconfig->major == 1)
+                {
+                    _glfwInputError(GLFW_API_UNAVAILABLE,
+                                    "EGL: Failed to find support for OpenGL ES 1.x");
+                }
+                else
+                {
+                    _glfwInputError(GLFW_API_UNAVAILABLE,
+                                    "EGL: Failed to find support for OpenGL ES 2 or later");
+                }
+            }
+            else
+            {
+                _glfwInputError(GLFW_API_UNAVAILABLE,
+                                "EGL: Failed to find support for OpenGL");
+            }
+        }
+        else
+        {
+            _glfwInputError(GLFW_FORMAT_UNAVAILABLE,
+                            "EGL: Failed to find a suitable EGLConfig");
+        }
+    }
 
     _glfw_free(nativeConfigs);
     _glfw_free(usableConfigs);
@@ -550,11 +583,7 @@ GLFWbool _glfwCreateContextEGL(_GLFWwindow* window,
         share = ctxconfig->share->context.egl.handle;
 
     if (!chooseEGLConfig(ctxconfig, fbconfig, &config))
-    {
-        _glfwInputError(GLFW_FORMAT_UNAVAILABLE,
-                        "EGL: Failed to find a suitable EGLConfig");
         return GLFW_FALSE;
-    }
 
     if (ctxconfig->client == GLFW_OPENGL_ES_API)
     {
@@ -815,11 +844,7 @@ GLFWbool _glfwChooseVisualEGL(const _GLFWwndconfig* wndconfig,
     const long vimask = VisualScreenMask | VisualIDMask;
 
     if (!chooseEGLConfig(ctxconfig, fbconfig, &native))
-    {
-        _glfwInputError(GLFW_FORMAT_UNAVAILABLE,
-                        "EGL: Failed to find a suitable EGLConfig");
         return GLFW_FALSE;
-    }
 
     eglGetConfigAttrib(_glfw.egl.display, native,
                        EGL_NATIVE_VISUAL_ID, &visualID);

src/glx_context.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_X11)
+
 #include <string.h>
 #include <stdlib.h>
 #include <assert.h>
@@ -714,3 +716,5 @@ GLFWAPI GLXWindow glfwGetGLXWindow(GLFWwindow* handle)
     return window->context.glx.window;
 }
 
+#endif // _GLFW_X11
+

src/internal.h

@@ -330,13 +330,6 @@ typedef VkResult (APIENTRY * PFN_vkEnumerateInstanceExtensionProperties)(const c
 
 #include "platform.h"
 
-// Constructs a version number string from the public header macros
-#define _GLFW_CONCAT_VERSION(m, n, r) #m "." #n "." #r
-#define _GLFW_MAKE_VERSION(m, n, r) _GLFW_CONCAT_VERSION(m, n, r)
-#define _GLFW_VERSION_NUMBER _GLFW_MAKE_VERSION(GLFW_VERSION_MAJOR, \
-                                                GLFW_VERSION_MINOR, \
-                                                GLFW_VERSION_REVISION)
-
 // Checks for whether the library has been initialized
 #define _GLFW_REQUIRE_INIT()                         \
     if (!_glfw.initialized)                          \

src/linux_joystick.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(GLFW_BUILD_LINUX_JOYSTICK)
+
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <sys/inotify.h>
@@ -429,3 +431,5 @@ void _glfwUpdateGamepadGUIDLinux(char* guid)
 {
 }
 
+#endif // GLFW_BUILD_LINUX_JOYSTICK
+

src/linux_joystick.h

@@ -31,8 +31,6 @@
 #define GLFW_LINUX_JOYSTICK_STATE         _GLFWjoystickLinux linjs;
 #define GLFW_LINUX_LIBRARY_JOYSTICK_STATE _GLFWlibraryLinux  linjs;
 
-#define GLFW_BUILD_LINUX_MAPPINGS
-
 // Linux-specific joystick data
 //
 typedef struct _GLFWjoystickLinux

src/mappings.h

@@ -60,7 +60,7 @@
 
 const char* _glfwDefaultMappings[] =
 {
-#if defined(GLFW_BUILD_WIN32_MAPPINGS)
+#if defined(_GLFW_WIN32)
 "03000000fa2d00000100000000000000,3DRUDDER,leftx:a0,lefty:a1,rightx:a5,righty:a2,platform:Windows,",
 "03000000c82d00002038000000000000,8bitdo,a:b1,b:b0,back:b10,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,guide:b2,leftshoulder:b6,leftstick:b13,lefttrigger:b8,leftx:a0,lefty:a1,rightshoulder:b7,rightstick:b14,righttrigger:b9,rightx:a3,righty:a4,start:b11,x:b4,y:b3,platform:Windows,",
 "03000000c82d00000951000000000000,8BitDo Dogbone Modkit,a:b1,b:b0,back:b10,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,start:b11,platform:Windows,",
@@ -426,9 +426,9 @@ const char* _glfwDefaultMappings[] =
 "78696e70757405000000000000000000,XInput Dance Pad (GLFW),platform:Windows,a:b0,b:b1,x:b2,y:b3,leftshoulder:b4,rightshoulder:b5,back:b6,start:b7,leftstick:b8,rightstick:b9,leftx:a0,lefty:a1,rightx:a2,righty:a3,lefttrigger:a4,righttrigger:a5,dpup:h0.1,dpright:h0.2,dpdown:h0.4,dpleft:h0.8,",
 "78696e70757406000000000000000000,XInput Guitar (GLFW),platform:Windows,a:b0,b:b1,x:b2,y:b3,leftshoulder:b4,rightshoulder:b5,back:b6,start:b7,leftstick:b8,rightstick:b9,leftx:a0,lefty:a1,rightx:a2,righty:a3,lefttrigger:a4,righttrigger:a5,dpup:h0.1,dpright:h0.2,dpdown:h0.4,dpleft:h0.8,",
 "78696e70757408000000000000000000,XInput Drum Kit (GLFW),platform:Windows,a:b0,b:b1,x:b2,y:b3,leftshoulder:b4,rightshoulder:b5,back:b6,start:b7,leftstick:b8,rightstick:b9,leftx:a0,lefty:a1,rightx:a2,righty:a3,lefttrigger:a4,righttrigger:a5,dpup:h0.1,dpright:h0.2,dpdown:h0.4,dpleft:h0.8,",
-#endif // GLFW_BUILD_WIN32_MAPPINGS
+#endif // _GLFW_WIN32
 
-#if defined(GLFW_BUILD_COCOA_MAPPINGS)
+#if defined(_GLFW_COCOA)
 "030000008f0e00000300000009010000,2In1 USB Joystick,a:b2,b:b1,back:b8,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,leftshoulder:b4,leftstick:b10,lefttrigger:b6,leftx:a0,lefty:a1,rightshoulder:b5,rightstick:b11,righttrigger:b7,rightx:a2,righty:a3,start:b9,x:b3,y:b0,platform:Mac OS X,",
 "03000000c82d00000090000001000000,8BitDo FC30 Pro,a:b1,b:b0,back:b10,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,leftshoulder:b6,leftstick:b13,lefttrigger:a4,leftx:a0,lefty:a1,rightshoulder:b7,rightstick:b14,righttrigger:a5,rightx:a2,righty:a3,start:b11,x:b4,y:b3,platform:Mac OS X,",
 "03000000c82d00001038000000010000,8BitDo FC30 Pro,a:b1,b:b0,back:b10,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,leftshoulder:b6,leftstick:b13,lefttrigger:a5,leftx:a0,lefty:a1,rightshoulder:b7,rightstick:b14,righttrigger:a4,rightx:a2,righty:a3,start:b11,x:b4,y:b3,platform:Mac OS X,",
@@ -598,9 +598,9 @@ const char* _glfwDefaultMappings[] =
 "03000000172700004431000029010000,XiaoMi Game Controller,a:b0,b:b1,back:b10,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,guide:b15,leftshoulder:b6,leftstick:b13,lefttrigger:b8,leftx:a0,lefty:a1,rightshoulder:b7,rightstick:b14,righttrigger:a6,rightx:a2,righty:a5,start:b11,x:b3,y:b4,platform:Mac OS X,",
 "03000000120c0000100e000000010000,ZEROPLUS P4 Gamepad,a:b1,b:b2,back:b8,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,guide:b12,leftshoulder:b4,leftstick:b10,lefttrigger:a3,leftx:a0,lefty:a1,rightshoulder:b5,rightstick:b11,righttrigger:a4,rightx:a2,righty:a5,start:b9,x:b0,y:b3,platform:Mac OS X,",
 "03000000120c0000101e000000010000,ZEROPLUS P4 Wired Gamepad,a:b1,b:b2,back:b8,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,guide:b12,leftshoulder:b4,leftstick:b10,lefttrigger:a3,leftx:a0,lefty:a1,rightshoulder:b5,rightstick:b11,righttrigger:a4,rightx:a2,righty:a5,start:b9,x:b0,y:b3,platform:Mac OS X,",
-#endif // GLFW_BUILD_COCOA_MAPPINGS
+#endif // _GLFW_COCOA
 
-#if defined(GLFW_BUILD_LINUX_MAPPINGS)
+#if defined(GLFW_BUILD_LINUX_JOYSTICK)
 "03000000c82d00000090000011010000,8BitDo FC30 Pro,a:b1,b:b0,back:b10,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,leftshoulder:b6,leftstick:b13,lefttrigger:a4,leftx:a0,lefty:a1,rightshoulder:b7,rightstick:b14,righttrigger:a5,rightx:a2,righty:a3,start:b11,x:b4,y:b3,platform:Linux,",
 "05000000c82d00001038000000010000,8Bitdo FC30 Pro,a:b1,b:b0,back:b10,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,leftshoulder:b6,leftstick:b13,lefttrigger:b8,leftx:a0,lefty:a1,rightshoulder:b7,rightstick:b14,righttrigger:b9,rightx:a2,righty:a3,start:b11,x:b4,y:b3,platform:Linux,",
 "05000000c82d00005106000000010000,8BitDo M30,a:b0,b:b1,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,leftshoulder:b8,lefttrigger:b9,leftx:a0,lefty:a1,rightshoulder:b6,righttrigger:b7,start:b11,x:b3,y:b4,platform:Linux,",
@@ -996,6 +996,6 @@ const char* _glfwDefaultMappings[] =
 "03000000c0160000e105000001010000,Xin-Mo Xin-Mo Dual Arcade,a:b4,b:b3,back:b6,dpdown:b12,dpleft:b13,dpright:b14,dpup:b11,guide:b9,leftshoulder:b2,leftx:a0,lefty:a1,rightshoulder:b5,start:b7,x:b1,y:b0,platform:Linux,",
 "03000000120c0000100e000011010000,ZEROPLUS P4 Gamepad,a:b1,b:b2,back:b8,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,guide:b12,leftshoulder:b4,leftstick:b10,lefttrigger:a3,leftx:a0,lefty:a1,rightshoulder:b5,rightstick:b11,righttrigger:a4,rightx:a2,righty:a5,start:b9,x:b0,y:b3,platform:Linux,",
 "03000000120c0000101e000011010000,ZEROPLUS P4 Wired Gamepad,a:b1,b:b2,back:b8,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,guide:b12,leftshoulder:b4,leftstick:b10,lefttrigger:a3,leftx:a0,lefty:a1,rightshoulder:b5,rightstick:b11,righttrigger:a4,rightx:a2,righty:a5,start:b9,x:b0,y:b3,platform:Linux,",
-#endif // GLFW_BUILD_LINUX_MAPPINGS
+#endif // GLFW_BUILD_LINUX_JOYSTICK
 };
 

src/mappings.h.in

@@ -60,7 +60,7 @@
 
 const char* _glfwDefaultMappings[] =
 {
-#if defined(GLFW_BUILD_WIN32_MAPPINGS)
+#if defined(_GLFW_WIN32)
 @GLFW_WIN32_MAPPINGS@
 "78696e70757401000000000000000000,XInput Gamepad (GLFW),platform:Windows,a:b0,b:b1,x:b2,y:b3,leftshoulder:b4,rightshoulder:b5,back:b6,start:b7,leftstick:b8,rightstick:b9,leftx:a0,lefty:a1,rightx:a2,righty:a3,lefttrigger:a4,righttrigger:a5,dpup:h0.1,dpright:h0.2,dpdown:h0.4,dpleft:h0.8,",
 "78696e70757402000000000000000000,XInput Wheel (GLFW),platform:Windows,a:b0,b:b1,x:b2,y:b3,leftshoulder:b4,rightshoulder:b5,back:b6,start:b7,leftstick:b8,rightstick:b9,leftx:a0,lefty:a1,rightx:a2,righty:a3,lefttrigger:a4,righttrigger:a5,dpup:h0.1,dpright:h0.2,dpdown:h0.4,dpleft:h0.8,",
@@ -69,14 +69,14 @@ const char* _glfwDefaultMappings[] =
 "78696e70757405000000000000000000,XInput Dance Pad (GLFW),platform:Windows,a:b0,b:b1,x:b2,y:b3,leftshoulder:b4,rightshoulder:b5,back:b6,start:b7,leftstick:b8,rightstick:b9,leftx:a0,lefty:a1,rightx:a2,righty:a3,lefttrigger:a4,righttrigger:a5,dpup:h0.1,dpright:h0.2,dpdown:h0.4,dpleft:h0.8,",
 "78696e70757406000000000000000000,XInput Guitar (GLFW),platform:Windows,a:b0,b:b1,x:b2,y:b3,leftshoulder:b4,rightshoulder:b5,back:b6,start:b7,leftstick:b8,rightstick:b9,leftx:a0,lefty:a1,rightx:a2,righty:a3,lefttrigger:a4,righttrigger:a5,dpup:h0.1,dpright:h0.2,dpdown:h0.4,dpleft:h0.8,",
 "78696e70757408000000000000000000,XInput Drum Kit (GLFW),platform:Windows,a:b0,b:b1,x:b2,y:b3,leftshoulder:b4,rightshoulder:b5,back:b6,start:b7,leftstick:b8,rightstick:b9,leftx:a0,lefty:a1,rightx:a2,righty:a3,lefttrigger:a4,righttrigger:a5,dpup:h0.1,dpright:h0.2,dpdown:h0.4,dpleft:h0.8,",
-#endif // GLFW_BUILD_WIN32_MAPPINGS
+#endif // _GLFW_WIN32
 
-#if defined(GLFW_BUILD_COCOA_MAPPINGS)
+#if defined(_GLFW_COCOA)
 @GLFW_COCOA_MAPPINGS@
-#endif // GLFW_BUILD_COCOA_MAPPINGS
+#endif // _GLFW_COCOA
 
-#if defined(GLFW_BUILD_LINUX_MAPPINGS)
+#if defined(GLFW_BUILD_LINUX_JOYSTICK)
 @GLFW_LINUX_MAPPINGS@
-#endif // GLFW_BUILD_LINUX_MAPPINGS
+#endif // GLFW_BUILD_LINUX_JOYSTICK
 };
 

src/nsgl_context.m

@@ -28,6 +28,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_COCOA)
+
 #include <unistd.h>
 #include <math.h>
 
@@ -374,3 +376,5 @@ GLFWAPI id glfwGetNSGLContext(GLFWwindow* handle)
     return window->context.nsgl.object;
 }
 
+#endif // _GLFW_COCOA
+

src/platform.c

@@ -29,6 +29,10 @@
 
 #include "internal.h"
 
+// These construct a string literal from individual numeric constants
+#define _GLFW_CONCAT_VERSION(m, n, r) #m "." #n "." #r
+#define _GLFW_MAKE_VERSION(m, n, r) _GLFW_CONCAT_VERSION(m, n, r)
+
 //////////////////////////////////////////////////////////////////////////
 //////                       GLFW internal API                      //////
 //////////////////////////////////////////////////////////////////////////
@@ -146,7 +150,9 @@ GLFWAPI int glfwPlatformSupported(int platformID)
 
 GLFWAPI const char* glfwGetVersionString(void)
 {
-    return _GLFW_VERSION_NUMBER
+    return _GLFW_MAKE_VERSION(GLFW_VERSION_MAJOR,
+                              GLFW_VERSION_MINOR,
+                              GLFW_VERSION_REVISION)
 #if defined(_GLFW_WIN32)
         " Win32 WGL"
 #endif

src/platform.h

@@ -25,6 +25,18 @@
 //
 //========================================================================
 
+#if defined(GLFW_BUILD_WIN32_TIMER) || \
+    defined(GLFW_BUILD_WIN32_MODULE) || \
+    defined(GLFW_BUILD_WIN32_THREAD) || \
+    defined(GLFW_BUILD_COCOA_TIMER) || \
+    defined(GLFW_BUILD_POSIX_TIMER) || \
+    defined(GLFW_BUILD_POSIX_MODULE) || \
+    defined(GLFW_BUILD_POSIX_THREAD) || \
+    defined(GLFW_BUILD_POSIX_POLL) || \
+    defined(GLFW_BUILD_LINUX_JOYSTICK)
+ #error "You must not define these; define zero or more _GLFW_<platform> macros instead"
+#endif
+
 #include "null_platform.h"
 
 #if defined(_GLFW_WIN32)
@@ -86,6 +98,10 @@
 #endif
 
 #if (defined(_GLFW_X11) || defined(_GLFW_WAYLAND)) && defined(__linux__)
+ #define GLFW_BUILD_LINUX_JOYSTICK
+#endif
+
+#if defined(GLFW_BUILD_LINUX_JOYSTICK)
  #include "linux_joystick.h"
 #else
  #define GLFW_LINUX_JOYSTICK_STATE
@@ -141,27 +157,55 @@
         GLFW_GLX_LIBRARY_CONTEXT_STATE
 
 #if defined(_WIN32)
+ #define GLFW_BUILD_WIN32_THREAD
+#else
+ #define GLFW_BUILD_POSIX_THREAD
+#endif
+
+#if defined(GLFW_BUILD_WIN32_THREAD)
  #include "win32_thread.h"
  #define GLFW_PLATFORM_TLS_STATE    GLFW_WIN32_TLS_STATE
  #define GLFW_PLATFORM_MUTEX_STATE  GLFW_WIN32_MUTEX_STATE
-#else
+#elif defined(GLFW_BUILD_POSIX_THREAD)
  #include "posix_thread.h"
  #define GLFW_PLATFORM_TLS_STATE    GLFW_POSIX_TLS_STATE
  #define GLFW_PLATFORM_MUTEX_STATE  GLFW_POSIX_MUTEX_STATE
 #endif
 
 #if defined(_WIN32)
- #include "win32_time.h"
+ #define GLFW_BUILD_WIN32_TIMER
- #define GLFW_PLATFORM_LIBRARY_TIMER_STATE  GLFW_WIN32_LIBRARY_TIMER_STATE
- #define GLFW_PLATFORM_LIBRARY_DBUS_STATE
 #elif defined(__APPLE__)
- #include "cocoa_time.h"
+ #define GLFW_BUILD_COCOA_TIMER
- #define GLFW_PLATFORM_LIBRARY_TIMER_STATE  GLFW_COCOA_LIBRARY_TIMER_STATE
- #define GLFW_PLATFORM_LIBRARY_DBUS_STATE
 #else
- #include "posix_time.h"
+ #define GLFW_BUILD_POSIX_TIMER
- #define GLFW_PLATFORM_LIBRARY_TIMER_STATE  GLFW_POSIX_LIBRARY_TIMER_STATE
+ #define GLFW_BUILD_POSIX_DBUS
- #include "posix_dbus.h"
+#endif
- #define GLFW_PLATFORM_LIBRARY_DBUS_STATE  GLFW_POSIX_LIBRARY_DBUS_STATE
+
+#if defined(GLFW_BUILD_WIN32_TIMER)
+ #include "win32_time.h"
+ #define GLFW_PLATFORM_LIBRARY_TIMER_STATE  GLFW_WIN32_LIBRARY_TIMER_STATE
+#elif defined(GLFW_BUILD_COCOA_TIMER)
+ #include "cocoa_time.h"
+ #define GLFW_PLATFORM_LIBRARY_TIMER_STATE  GLFW_COCOA_LIBRARY_TIMER_STATE
+#elif defined(GLFW_BUILD_POSIX_TIMER)
+ #include "posix_time.h"
+ #define GLFW_PLATFORM_LIBRARY_TIMER_STATE  GLFW_POSIX_LIBRARY_TIMER_STATE
+#endif
+
+#if defined(GLFW_BUILD_POSIX_DBUS)
+ #include "posix_dbus.h"
+ #define GLFW_PLATFORM_LIBRARY_DBUS_STATE  GLFW_POSIX_LIBRARY_DBUS_STATE
+#else
+ #define GLFW_PLATFORM_LIBRARY_DBUS_STATE
+#endif
+
+#if defined(_WIN32)
+ #define GLFW_BUILD_WIN32_MODULE
+#else
+ #define GLFW_BUILD_POSIX_MODULE
+#endif
+
+#if defined(_GLFW_WAYLAND) || defined(_GLFW_X11)
+ #define GLFW_BUILD_POSIX_POLL
 #endif
 

src/posix_module.c

@@ -28,6 +28,8 @@
 
 #include "internal.h"
 
+#if defined(GLFW_BUILD_POSIX_MODULE)
+
 #include <dlfcn.h>
 
 //////////////////////////////////////////////////////////////////////////
@@ -49,3 +51,5 @@ GLFWproc _glfwPlatformGetModuleSymbol(void* module, const char* name)
     return dlsym(module, name);
 }
 
+#endif // GLFW_BUILD_POSIX_MODULE
+

src/posix_poll.c

@@ -30,6 +30,8 @@
 
 #include "internal.h"
 
+#if defined(GLFW_BUILD_POSIX_POLL)
+
 #include <signal.h>
 #include <time.h>
 #include <errno.h>
@@ -79,3 +81,5 @@ GLFWbool _glfwPollPOSIX(struct pollfd* fds, nfds_t count, double* timeout)
     }
 }
 
+#endif // GLFW_BUILD_POSIX_POLL
+

src/posix_thread.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(GLFW_BUILD_POSIX_THREAD)
+
 #include <assert.h>
 #include <string.h>
 
@@ -103,3 +105,5 @@ void _glfwPlatformUnlockMutex(_GLFWmutex* mutex)
     pthread_mutex_unlock(&mutex->posix.handle);
 }
 
+#endif // GLFW_BUILD_POSIX_THREAD
+

src/posix_time.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(GLFW_BUILD_POSIX_TIMER)
+
 #include <unistd.h>
 #include <sys/time.h>
 
@@ -61,3 +63,5 @@ uint64_t _glfwPlatformGetTimerFrequency(void)
     return _glfw.timer.posix.frequency;
 }
 
+#endif // GLFW_BUILD_POSIX_TIMER
+

src/wgl_context.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_WIN32)
+
 #include <stdlib.h>
 #include <assert.h>
 
@@ -776,3 +778,5 @@ GLFWAPI HGLRC glfwGetWGLContext(GLFWwindow* handle)
     return window->context.wgl.handle;
 }
 
+#endif // _GLFW_WIN32
+

src/win32_init.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_WIN32)
+
 #include <stdlib.h>
 
 static const GUID _glfw_GUID_DEVINTERFACE_HID =
@@ -726,3 +728,5 @@ void _glfwTerminateWin32(void)
     freeLibraries();
 }
 
+#endif // _GLFW_WIN32
+

src/win32_joystick.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_WIN32)
+
 #include <stdio.h>
 #include <math.h>
 
@@ -756,3 +758,5 @@ void _glfwUpdateGamepadGUIDWin32(char* guid)
     }
 }
 
+#endif // _GLFW_WIN32
+

src/win32_joystick.h

@@ -27,8 +27,6 @@
 #define GLFW_WIN32_JOYSTICK_STATE         _GLFWjoystickWin32 win32;
 #define GLFW_WIN32_LIBRARY_JOYSTICK_STATE
 
-#define GLFW_BUILD_WIN32_MAPPINGS
-
 // Joystick element (axis, button or slider)
 //
 typedef struct _GLFWjoyobjectWin32

src/win32_module.c

@@ -28,6 +28,8 @@
 
 #include "internal.h"
 
+#if defined(GLFW_BUILD_WIN32_MODULE)
+
 //////////////////////////////////////////////////////////////////////////
 //////                       GLFW platform API                      //////
 //////////////////////////////////////////////////////////////////////////
@@ -47,3 +49,5 @@ GLFWproc _glfwPlatformGetModuleSymbol(void* module, const char* name)
     return (GLFWproc) GetProcAddress((HMODULE) module, name);
 }
 
+#endif // GLFW_BUILD_WIN32_MODULE
+

src/win32_monitor.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_WIN32)
+
 #include <stdlib.h>
 #include <string.h>
 #include <limits.h>
@@ -545,3 +547,5 @@ GLFWAPI const char* glfwGetWin32Monitor(GLFWmonitor* handle)
     return monitor->win32.publicDisplayName;
 }
 
+#endif // _GLFW_WIN32
+

src/win32_thread.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(GLFW_BUILD_WIN32_THREAD)
+
 #include <assert.h>
 
 
@@ -96,3 +98,5 @@ void _glfwPlatformUnlockMutex(_GLFWmutex* mutex)
     LeaveCriticalSection(&mutex->win32.section);
 }
 
+#endif // GLFW_BUILD_WIN32_THREAD
+

src/win32_time.c

@@ -29,6 +29,7 @@
 
 #include "internal.h"
 
+#if defined(GLFW_BUILD_WIN32_TIMER)
 
 //////////////////////////////////////////////////////////////////////////
 //////                       GLFW platform API                      //////
@@ -51,3 +52,5 @@ uint64_t _glfwPlatformGetTimerFrequency(void)
     return _glfw.timer.win32.frequency;
 }
 
+#endif // GLFW_BUILD_WIN32_TIMER
+

src/win32_window.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_WIN32)
+
 #include <limits.h>
 #include <stdlib.h>
 #include <string.h>
@@ -184,53 +186,38 @@ static HICON createIcon(const GLFWimage* image, int xhot, int yhot, GLFWbool ico
     return handle;
 }
 
-// Translate content area size to full window size according to styles and DPI
-//
-static void getFullWindowSize(DWORD style, DWORD exStyle,
-                              int contentWidth, int contentHeight,
-                              int* fullWidth, int* fullHeight,
-                              UINT dpi)
-{
-    RECT rect = { 0, 0, contentWidth, contentHeight };
-
-    if (_glfwIsWindows10Version1607OrGreaterWin32())
-        AdjustWindowRectExForDpi(&rect, style, FALSE, exStyle, dpi);
-    else
-        AdjustWindowRectEx(&rect, style, FALSE, exStyle);
-
-    *fullWidth = rect.right - rect.left;
-    *fullHeight = rect.bottom - rect.top;
-}
-
 // Enforce the content area aspect ratio based on which edge is being dragged
 //
 static void applyAspectRatio(_GLFWwindow* window, int edge, RECT* area)
 {
-    int xoff, yoff;
+    RECT frame = {0};
-    UINT dpi = USER_DEFAULT_SCREEN_DPI;
     const float ratio = (float) window->numer / (float) window->denom;
+    const DWORD style = getWindowStyle(window);
+    const DWORD exStyle = getWindowExStyle(window);
 
     if (_glfwIsWindows10Version1607OrGreaterWin32())
-        dpi = GetDpiForWindow(window->win32.handle);
+    {
-
+        AdjustWindowRectExForDpi(&frame, style, FALSE, exStyle,
-    getFullWindowSize(getWindowStyle(window), getWindowExStyle(window),
+                                 GetDpiForWindow(window->win32.handle));
-                      0, 0, &xoff, &yoff, dpi);
+    }
+    else
+        AdjustWindowRectEx(&frame, style, FALSE, exStyle);
 
     if (edge == WMSZ_LEFT  || edge == WMSZ_BOTTOMLEFT ||
         edge == WMSZ_RIGHT || edge == WMSZ_BOTTOMRIGHT)
     {
-        area->bottom = area->top + yoff +
+        area->bottom = area->top + (frame.bottom - frame.top) +
-            (int) ((area->right - area->left - xoff) / ratio);
+            (int) (((area->right - area->left) - (frame.right - frame.left)) / ratio);
     }
     else if (edge == WMSZ_TOPLEFT || edge == WMSZ_TOPRIGHT)
     {
-        area->top = area->bottom - yoff -
+        area->top = area->bottom - (frame.bottom - frame.top) -
-            (int) ((area->right - area->left - xoff) / ratio);
+            (int) (((area->right - area->left) - (frame.right - frame.left)) / ratio);
     }
     else if (edge == WMSZ_TOP || edge == WMSZ_BOTTOM)
     {
-        area->right = area->left + xoff +
+        area->right = area->left + (frame.right - frame.left) +
-            (int) ((area->bottom - area->top - yoff) * ratio);
+            (int) (((area->bottom - area->top) - (frame.bottom - frame.top)) * ratio);
     }
 }
 
@@ -1080,31 +1067,34 @@ static LRESULT CALLBACK windowProc(HWND hWnd, UINT uMsg, WPARAM wParam, LPARAM l
 
         case WM_GETMINMAXINFO:
         {
-            int xoff, yoff;
+            RECT frame = {0};
-            UINT dpi = USER_DEFAULT_SCREEN_DPI;
             MINMAXINFO* mmi = (MINMAXINFO*) lParam;
+            const DWORD style = getWindowStyle(window);
+            const DWORD exStyle = getWindowExStyle(window);
 
             if (window->monitor)
                 break;
 
             if (_glfwIsWindows10Version1607OrGreaterWin32())
-                dpi = GetDpiForWindow(window->win32.handle);
+            {
-
+                AdjustWindowRectExForDpi(&frame, style, FALSE, exStyle,
-            getFullWindowSize(getWindowStyle(window), getWindowExStyle(window),
+                                         GetDpiForWindow(window->win32.handle));
-                              0, 0, &xoff, &yoff, dpi);
+            }
+            else
+                AdjustWindowRectEx(&frame, style, FALSE, exStyle);
 
             if (window->minwidth != GLFW_DONT_CARE &&
                 window->minheight != GLFW_DONT_CARE)
             {
-                mmi->ptMinTrackSize.x = window->minwidth + xoff;
+                mmi->ptMinTrackSize.x = window->minwidth + frame.right - frame.left;
-                mmi->ptMinTrackSize.y = window->minheight + yoff;
+                mmi->ptMinTrackSize.y = window->minheight + frame.bottom - frame.top;
             }
 
             if (window->maxwidth != GLFW_DONT_CARE &&
                 window->maxheight != GLFW_DONT_CARE)
             {
-                mmi->ptMaxTrackSize.x = window->maxwidth + xoff;
+                mmi->ptMaxTrackSize.x = window->maxwidth + frame.right - frame.left;
-                mmi->ptMaxTrackSize.y = window->maxheight + yoff;
+                mmi->ptMaxTrackSize.y = window->maxheight + frame.bottom - frame.top;
             }
 
             if (!window->decorated)
@@ -1275,7 +1265,7 @@ static int createNativeWindow(_GLFWwindow* window,
                               const _GLFWwndconfig* wndconfig,
                               const _GLFWfbconfig* fbconfig)
 {
-    int xpos, ypos, fullWidth, fullHeight;
+    int frameX, frameY, frameWidth, frameHeight;
     WCHAR* wideTitle;
     DWORD style = getWindowStyle(window);
     DWORD exStyle = getWindowExStyle(window);
@@ -1321,10 +1311,10 @@ static int createNativeWindow(_GLFWwindow* window,
         // NOTE: This window placement is temporary and approximate, as the
         //       correct position and size cannot be known until the monitor
         //       video mode has been picked in _glfwSetVideoModeWin32
-        xpos = mi.rcMonitor.left;
+        frameX = mi.rcMonitor.left;
-        ypos = mi.rcMonitor.top;
+        frameY = mi.rcMonitor.top;
-        fullWidth  = mi.rcMonitor.right - mi.rcMonitor.left;
+        frameWidth  = mi.rcMonitor.right - mi.rcMonitor.left;
-        fullHeight = mi.rcMonitor.bottom - mi.rcMonitor.top;
+        frameHeight = mi.rcMonitor.bottom - mi.rcMonitor.top;
     }
     else
     {
@@ -1338,17 +1328,17 @@ static int createNativeWindow(_GLFWwindow* window,
 
         if (wndconfig->xpos == GLFW_ANY_POSITION && wndconfig->ypos == GLFW_ANY_POSITION)
         {
-            xpos = CW_USEDEFAULT;
+            frameX = CW_USEDEFAULT;
-            ypos = CW_USEDEFAULT;
+            frameY = CW_USEDEFAULT;
         }
         else
         {
-            xpos = wndconfig->xpos + rect.left;
+            frameX = wndconfig->xpos + rect.left;
-            ypos = wndconfig->ypos + rect.top;
+            frameY = wndconfig->ypos + rect.top;
         }
 
-        fullWidth = rect.right - rect.left;
+        frameWidth  = rect.right - rect.left;
-        fullHeight = rect.bottom - rect.top;
+        frameHeight = rect.bottom - rect.top;
     }
 
     wideTitle = _glfwCreateWideStringFromUTF8Win32(wndconfig->title);
@@ -1359,8 +1349,8 @@ static int createNativeWindow(_GLFWwindow* window,
                                            MAKEINTATOM(_glfw.win32.mainWindowClass),
                                            wideTitle,
                                            style,
-                                           xpos, ypos,
+                                           frameX, frameY,
-                                           fullWidth, fullHeight,
+                                           frameWidth, frameHeight,
                                            NULL, // No parent window
                                            NULL, // No window menu
                                            _glfw.win32.instance,
@@ -2567,3 +2557,5 @@ GLFWAPI HWND glfwGetWin32Window(GLFWwindow* handle)
     return window->win32.handle;
 }
 
+#endif // _GLFW_WIN32
+

src/wl_init.c

@@ -28,6 +28,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_WAYLAND)
+
 #include <errno.h>
 #include <limits.h>
 #include <linux/input.h>
@@ -392,7 +394,7 @@ GLFWbool _glfwConnectWayland(int platformID, _GLFWplatform* platform)
         _glfwGetKeyScancodeWayland,
         _glfwSetClipboardStringWayland,
         _glfwGetClipboardStringWayland,
-#if defined(__linux__)
+#if defined(_GLFW_LINUX_JOYSTICK)
         _glfwInitJoysticksLinux,
         _glfwTerminateJoysticksLinux,
         _glfwPollJoystickLinux,
@@ -796,3 +798,5 @@ void _glfwTerminateWayland(void)
     _glfwTerminateDBusPOSIX();
 }
 
+#endif // _GLFW_WAYLAND
+

src/wl_monitor.c

@@ -28,6 +28,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_WAYLAND)
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -270,3 +272,5 @@ GLFWAPI struct wl_output* glfwGetWaylandMonitor(GLFWmonitor* handle)
     return monitor->wl.output;
 }
 
+#endif // _GLFW_WAYLAND
+

src/wl_window.c

@@ -30,6 +30,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_WAYLAND)
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <errno.h>
@@ -2979,3 +2981,5 @@ GLFWAPI struct wl_surface* glfwGetWaylandWindow(GLFWwindow* handle)
     return window->wl.surface;
 }
 
+#endif // _GLFW_WAYLAND
+

src/x11_init.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_X11)
+
 #include <stdlib.h>
 #include <string.h>
 #include <limits.h>
@@ -1182,7 +1184,7 @@ GLFWbool _glfwConnectX11(int platformID, _GLFWplatform* platform)
         _glfwGetKeyScancodeX11,
         _glfwSetClipboardStringX11,
         _glfwGetClipboardStringX11,
-#if defined(__linux__)
+#if defined(_GLFW_LINUX_JOYSTICK)
         _glfwInitJoysticksLinux,
         _glfwTerminateJoysticksLinux,
         _glfwPollJoystickLinux,
@@ -1657,3 +1659,5 @@ void _glfwTerminateX11(void)
     _glfwTerminateDBusPOSIX();
 }
 
+#endif // _GLFW_X11
+

src/x11_monitor.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_X11)
+
 #include <limits.h>
 #include <stdlib.h>
 #include <string.h>
@@ -614,3 +616,5 @@ GLFWAPI RROutput glfwGetX11Monitor(GLFWmonitor* handle)
     return monitor->x11.output;
 }
 
+#endif // _GLFW_X11
+

src/x11_window.c

@@ -29,6 +29,8 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_X11)
+
 #include <X11/cursorfont.h>
 #include <X11/Xmd.h>
 
@@ -86,7 +88,7 @@ static GLFWbool waitForAnyEvent(double* timeout)
         { _glfw.x11.emptyEventPipe[0], POLLIN }
     };
 
-#if defined(__linux__)
+#if defined(_GLFW_LINUX_JOYSTICK)
     if (_glfw.joysticksInitialized)
         fds[count++] = (struct pollfd) { _glfw.linjs.inotify, POLLIN };
 #endif
@@ -2873,7 +2875,7 @@ void _glfwPollEventsX11(void)
 {
     drainEmptyEvents();
 
-#if defined(__linux__)
+#if defined(_GLFW_LINUX_JOYSTICK)
     if (_glfw.joysticksInitialized)
         _glfwDetectJoystickConnectionLinux();
 #endif
@@ -3441,3 +3443,5 @@ GLFWAPI const char* glfwGetX11SelectionString(void)
     return getSelectionString(_glfw.x11.PRIMARY);
 }
 
+#endif // _GLFW_X11
+

src/xkb_unicode.c

@@ -29,6 +29,7 @@
 
 #include "internal.h"
 
+#if defined(_GLFW_X11) || defined(_GLFW_WAYLAND)
 
 /*
  * Marcus: This code was originally written by Markus G. Kuhn.
@@ -940,3 +941,5 @@ uint32_t _glfwKeySym2Unicode(unsigned int keysym)
     return GLFW_INVALID_CODEPOINT;
 }
 
+#endif // _GLFW_WAYLAND or _GLFW_X11
+