From 2c3eb75748584c1c9283787e8c40f944fa055d6f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Camilla=20L=C3=B6wy?= Date: Tue, 5 Dec 2023 23:03:25 +0100 Subject: [PATCH] Wayland: Remove dependency on wayland-protocols This brings the latest released versions of all used Wayland protocol files into this repository, removing the need for the user to arrange a sufficiently new version of wayland-protocols. The wayland.xml protocol file was copied from wayland 1.22.0. The additional protocol files were copied from wayland-protocols 1.32. Because of how files are moved and renamed inside the wayland-protocols repository, it will not always be possible to update all our protocol files from a single release without also potentially updating related code (acceptable) and prematurely breaking compatibility with compositors that still only support an earlier incompatible version (unacceptable). The macro in src/CMakeLists.txt has been modified to hopefully make it easier to add new protocol files. This made it necessary to change the name of a few of the generated header files. Closes #2053 --- .github/workflows/build.yml | 2 +- deps/wayland/idle-inhibit-unstable-v1.xml | 83 + .../pointer-constraints-unstable-v1.xml | 339 ++ deps/wayland/relative-pointer-unstable-v1.xml | 136 + deps/wayland/viewporter.xml | 180 + deps/wayland/wayland.xml | 3151 +++++++++++++++++ deps/wayland/xdg-decoration-unstable-v1.xml | 156 + deps/wayland/xdg-shell.xml | 1370 +++++++ docs/compat.dox | 65 +- docs/compile.dox | 23 +- src/CMakeLists.txt | 57 +- src/wl_init.c | 26 +- src/wl_monitor.c | 10 - src/wl_window.c | 16 +- 14 files changed, 5497 insertions(+), 117 deletions(-) create mode 100644 deps/wayland/idle-inhibit-unstable-v1.xml create mode 100644 deps/wayland/pointer-constraints-unstable-v1.xml create mode 100644 deps/wayland/relative-pointer-unstable-v1.xml create mode 100644 deps/wayland/viewporter.xml create mode 100644 deps/wayland/wayland.xml create mode 100644 deps/wayland/xdg-decoration-unstable-v1.xml create mode 100644 deps/wayland/xdg-shell.xml diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index b3431198..11d111cb 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -20,7 +20,7 @@ jobs: - name: Install dependencies run: | sudo apt update - sudo apt install libxrandr-dev libxinerama-dev libxcursor-dev libxi-dev libxext-dev wayland-protocols libwayland-dev libxkbcommon-dev + sudo apt install libxrandr-dev libxinerama-dev libxcursor-dev libxi-dev libxext-dev libwayland-dev libxkbcommon-dev - name: Configure Null shared library run: cmake -B build-null-shared -D GLFW_BUILD_WAYLAND=OFF -D GLFW_BUILD_X11=OFF -D BUILD_SHARED_LIBS=ON diff --git a/deps/wayland/idle-inhibit-unstable-v1.xml b/deps/wayland/idle-inhibit-unstable-v1.xml new file mode 100644 index 00000000..9c06cdcb --- /dev/null +++ b/deps/wayland/idle-inhibit-unstable-v1.xml @@ -0,0 +1,83 @@ + + + + + Copyright © 2015 Samsung Electronics Co., Ltd + + Permission is hereby granted, free of charge, to any person obtaining a + copy of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice (including the next + paragraph) shall be included in all copies or substantial portions of the + Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + + + + + This interface permits inhibiting the idle behavior such as screen + blanking, locking, and screensaving. The client binds the idle manager + globally, then creates idle-inhibitor objects for each surface. + + Warning! The protocol described in this file is experimental and + backward incompatible changes may be made. Backward compatible changes + may be added together with the corresponding interface version bump. + Backward incompatible changes are done by bumping the version number in + the protocol and interface names and resetting the interface version. + Once the protocol is to be declared stable, the 'z' prefix and the + version number in the protocol and interface names are removed and the + interface version number is reset. + + + + + Destroy the inhibit manager. + + + + + + Create a new inhibitor object associated with the given surface. + + + + + + + + + + An idle inhibitor prevents the output that the associated surface is + visible on from being set to a state where it is not visually usable due + to lack of user interaction (e.g. blanked, dimmed, locked, set to power + save, etc.) Any screensaver processes are also blocked from displaying. + + If the surface is destroyed, unmapped, becomes occluded, loses + visibility, or otherwise becomes not visually relevant for the user, the + idle inhibitor will not be honored by the compositor; if the surface + subsequently regains visibility the inhibitor takes effect once again. + Likewise, the inhibitor isn't honored if the system was already idled at + the time the inhibitor was established, although if the system later + de-idles and re-idles the inhibitor will take effect. + + + + + Remove the inhibitor effect from the associated wl_surface. + + + + + diff --git a/deps/wayland/pointer-constraints-unstable-v1.xml b/deps/wayland/pointer-constraints-unstable-v1.xml new file mode 100644 index 00000000..efd64b66 --- /dev/null +++ b/deps/wayland/pointer-constraints-unstable-v1.xml @@ -0,0 +1,339 @@ + + + + + Copyright © 2014 Jonas Ådahl + Copyright © 2015 Red Hat Inc. + + Permission is hereby granted, free of charge, to any person obtaining a + copy of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice (including the next + paragraph) shall be included in all copies or substantial portions of the + Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + + + + This protocol specifies a set of interfaces used for adding constraints to + the motion of a pointer. Possible constraints include confining pointer + motions to a given region, or locking it to its current position. + + In order to constrain the pointer, a client must first bind the global + interface "wp_pointer_constraints" which, if a compositor supports pointer + constraints, is exposed by the registry. Using the bound global object, the + client uses the request that corresponds to the type of constraint it wants + to make. See wp_pointer_constraints for more details. + + Warning! The protocol described in this file is experimental and backward + incompatible changes may be made. Backward compatible changes may be added + together with the corresponding interface version bump. Backward + incompatible changes are done by bumping the version number in the protocol + and interface names and resetting the interface version. Once the protocol + is to be declared stable, the 'z' prefix and the version number in the + protocol and interface names are removed and the interface version number is + reset. + + + + + The global interface exposing pointer constraining functionality. It + exposes two requests: lock_pointer for locking the pointer to its + position, and confine_pointer for locking the pointer to a region. + + The lock_pointer and confine_pointer requests create the objects + wp_locked_pointer and wp_confined_pointer respectively, and the client can + use these objects to interact with the lock. + + For any surface, only one lock or confinement may be active across all + wl_pointer objects of the same seat. If a lock or confinement is requested + when another lock or confinement is active or requested on the same surface + and with any of the wl_pointer objects of the same seat, an + 'already_constrained' error will be raised. + + + + + These errors can be emitted in response to wp_pointer_constraints + requests. + + + + + + + These values represent different lifetime semantics. They are passed + as arguments to the factory requests to specify how the constraint + lifetimes should be managed. + + + + A oneshot pointer constraint will never reactivate once it has been + deactivated. See the corresponding deactivation event + (wp_locked_pointer.unlocked and wp_confined_pointer.unconfined) for + details. + + + + + A persistent pointer constraint may again reactivate once it has + been deactivated. See the corresponding deactivation event + (wp_locked_pointer.unlocked and wp_confined_pointer.unconfined) for + details. + + + + + + + Used by the client to notify the server that it will no longer use this + pointer constraints object. + + + + + + The lock_pointer request lets the client request to disable movements of + the virtual pointer (i.e. the cursor), effectively locking the pointer + to a position. This request may not take effect immediately; in the + future, when the compositor deems implementation-specific constraints + are satisfied, the pointer lock will be activated and the compositor + sends a locked event. + + The protocol provides no guarantee that the constraints are ever + satisfied, and does not require the compositor to send an error if the + constraints cannot ever be satisfied. It is thus possible to request a + lock that will never activate. + + There may not be another pointer constraint of any kind requested or + active on the surface for any of the wl_pointer objects of the seat of + the passed pointer when requesting a lock. If there is, an error will be + raised. See general pointer lock documentation for more details. + + The intersection of the region passed with this request and the input + region of the surface is used to determine where the pointer must be + in order for the lock to activate. It is up to the compositor whether to + warp the pointer or require some kind of user interaction for the lock + to activate. If the region is null the surface input region is used. + + A surface may receive pointer focus without the lock being activated. + + The request creates a new object wp_locked_pointer which is used to + interact with the lock as well as receive updates about its state. See + the the description of wp_locked_pointer for further information. + + Note that while a pointer is locked, the wl_pointer objects of the + corresponding seat will not emit any wl_pointer.motion events, but + relative motion events will still be emitted via wp_relative_pointer + objects of the same seat. wl_pointer.axis and wl_pointer.button events + are unaffected. + + + + + + + + + + + The confine_pointer request lets the client request to confine the + pointer cursor to a given region. This request may not take effect + immediately; in the future, when the compositor deems implementation- + specific constraints are satisfied, the pointer confinement will be + activated and the compositor sends a confined event. + + The intersection of the region passed with this request and the input + region of the surface is used to determine where the pointer must be + in order for the confinement to activate. It is up to the compositor + whether to warp the pointer or require some kind of user interaction for + the confinement to activate. If the region is null the surface input + region is used. + + The request will create a new object wp_confined_pointer which is used + to interact with the confinement as well as receive updates about its + state. See the the description of wp_confined_pointer for further + information. + + + + + + + + + + + + The wp_locked_pointer interface represents a locked pointer state. + + While the lock of this object is active, the wl_pointer objects of the + associated seat will not emit any wl_pointer.motion events. + + This object will send the event 'locked' when the lock is activated. + Whenever the lock is activated, it is guaranteed that the locked surface + will already have received pointer focus and that the pointer will be + within the region passed to the request creating this object. + + To unlock the pointer, send the destroy request. This will also destroy + the wp_locked_pointer object. + + If the compositor decides to unlock the pointer the unlocked event is + sent. See wp_locked_pointer.unlock for details. + + When unlocking, the compositor may warp the cursor position to the set + cursor position hint. If it does, it will not result in any relative + motion events emitted via wp_relative_pointer. + + If the surface the lock was requested on is destroyed and the lock is not + yet activated, the wp_locked_pointer object is now defunct and must be + destroyed. + + + + + Destroy the locked pointer object. If applicable, the compositor will + unlock the pointer. + + + + + + Set the cursor position hint relative to the top left corner of the + surface. + + If the client is drawing its own cursor, it should update the position + hint to the position of its own cursor. A compositor may use this + information to warp the pointer upon unlock in order to avoid pointer + jumps. + + The cursor position hint is double buffered. The new hint will only take + effect when the associated surface gets it pending state applied. See + wl_surface.commit for details. + + + + + + + + Set a new region used to lock the pointer. + + The new lock region is double-buffered. The new lock region will + only take effect when the associated surface gets its pending state + applied. See wl_surface.commit for details. + + For details about the lock region, see wp_locked_pointer. + + + + + + + Notification that the pointer lock of the seat's pointer is activated. + + + + + + Notification that the pointer lock of the seat's pointer is no longer + active. If this is a oneshot pointer lock (see + wp_pointer_constraints.lifetime) this object is now defunct and should + be destroyed. If this is a persistent pointer lock (see + wp_pointer_constraints.lifetime) this pointer lock may again + reactivate in the future. + + + + + + + The wp_confined_pointer interface represents a confined pointer state. + + This object will send the event 'confined' when the confinement is + activated. Whenever the confinement is activated, it is guaranteed that + the surface the pointer is confined to will already have received pointer + focus and that the pointer will be within the region passed to the request + creating this object. It is up to the compositor to decide whether this + requires some user interaction and if the pointer will warp to within the + passed region if outside. + + To unconfine the pointer, send the destroy request. This will also destroy + the wp_confined_pointer object. + + If the compositor decides to unconfine the pointer the unconfined event is + sent. The wp_confined_pointer object is at this point defunct and should + be destroyed. + + + + + Destroy the confined pointer object. If applicable, the compositor will + unconfine the pointer. + + + + + + Set a new region used to confine the pointer. + + The new confine region is double-buffered. The new confine region will + only take effect when the associated surface gets its pending state + applied. See wl_surface.commit for details. + + If the confinement is active when the new confinement region is applied + and the pointer ends up outside of newly applied region, the pointer may + warped to a position within the new confinement region. If warped, a + wl_pointer.motion event will be emitted, but no + wp_relative_pointer.relative_motion event. + + The compositor may also, instead of using the new region, unconfine the + pointer. + + For details about the confine region, see wp_confined_pointer. + + + + + + + Notification that the pointer confinement of the seat's pointer is + activated. + + + + + + Notification that the pointer confinement of the seat's pointer is no + longer active. If this is a oneshot pointer confinement (see + wp_pointer_constraints.lifetime) this object is now defunct and should + be destroyed. If this is a persistent pointer confinement (see + wp_pointer_constraints.lifetime) this pointer confinement may again + reactivate in the future. + + + + + diff --git a/deps/wayland/relative-pointer-unstable-v1.xml b/deps/wayland/relative-pointer-unstable-v1.xml new file mode 100644 index 00000000..ca6f81d1 --- /dev/null +++ b/deps/wayland/relative-pointer-unstable-v1.xml @@ -0,0 +1,136 @@ + + + + + Copyright © 2014 Jonas Ådahl + Copyright © 2015 Red Hat Inc. + + Permission is hereby granted, free of charge, to any person obtaining a + copy of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice (including the next + paragraph) shall be included in all copies or substantial portions of the + Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + + + + This protocol specifies a set of interfaces used for making clients able to + receive relative pointer events not obstructed by barriers (such as the + monitor edge or other pointer barriers). + + To start receiving relative pointer events, a client must first bind the + global interface "wp_relative_pointer_manager" which, if a compositor + supports relative pointer motion events, is exposed by the registry. After + having created the relative pointer manager proxy object, the client uses + it to create the actual relative pointer object using the + "get_relative_pointer" request given a wl_pointer. The relative pointer + motion events will then, when applicable, be transmitted via the proxy of + the newly created relative pointer object. See the documentation of the + relative pointer interface for more details. + + Warning! The protocol described in this file is experimental and backward + incompatible changes may be made. Backward compatible changes may be added + together with the corresponding interface version bump. Backward + incompatible changes are done by bumping the version number in the protocol + and interface names and resetting the interface version. Once the protocol + is to be declared stable, the 'z' prefix and the version number in the + protocol and interface names are removed and the interface version number is + reset. + + + + + A global interface used for getting the relative pointer object for a + given pointer. + + + + + Used by the client to notify the server that it will no longer use this + relative pointer manager object. + + + + + + Create a relative pointer interface given a wl_pointer object. See the + wp_relative_pointer interface for more details. + + + + + + + + + A wp_relative_pointer object is an extension to the wl_pointer interface + used for emitting relative pointer events. It shares the same focus as + wl_pointer objects of the same seat and will only emit events when it has + focus. + + + + + + + + + Relative x/y pointer motion from the pointer of the seat associated with + this object. + + A relative motion is in the same dimension as regular wl_pointer motion + events, except they do not represent an absolute position. For example, + moving a pointer from (x, y) to (x', y') would have the equivalent + relative motion (x' - x, y' - y). If a pointer motion caused the + absolute pointer position to be clipped by for example the edge of the + monitor, the relative motion is unaffected by the clipping and will + represent the unclipped motion. + + This event also contains non-accelerated motion deltas. The + non-accelerated delta is, when applicable, the regular pointer motion + delta as it was before having applied motion acceleration and other + transformations such as normalization. + + Note that the non-accelerated delta does not represent 'raw' events as + they were read from some device. Pointer motion acceleration is device- + and configuration-specific and non-accelerated deltas and accelerated + deltas may have the same value on some devices. + + Relative motions are not coupled to wl_pointer.motion events, and can be + sent in combination with such events, but also independently. There may + also be scenarios where wl_pointer.motion is sent, but there is no + relative motion. The order of an absolute and relative motion event + originating from the same physical motion is not guaranteed. + + If the client needs button events or focus state, it can receive them + from a wl_pointer object of the same seat that the wp_relative_pointer + object is associated with. + + + + + + + + + + + diff --git a/deps/wayland/viewporter.xml b/deps/wayland/viewporter.xml new file mode 100644 index 00000000..d1048d1f --- /dev/null +++ b/deps/wayland/viewporter.xml @@ -0,0 +1,180 @@ + + + + + Copyright © 2013-2016 Collabora, Ltd. + + Permission is hereby granted, free of charge, to any person obtaining a + copy of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice (including the next + paragraph) shall be included in all copies or substantial portions of the + Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + + + + + The global interface exposing surface cropping and scaling + capabilities is used to instantiate an interface extension for a + wl_surface object. This extended interface will then allow + cropping and scaling the surface contents, effectively + disconnecting the direct relationship between the buffer and the + surface size. + + + + + Informs the server that the client will not be using this + protocol object anymore. This does not affect any other objects, + wp_viewport objects included. + + + + + + + + + + Instantiate an interface extension for the given wl_surface to + crop and scale its content. If the given wl_surface already has + a wp_viewport object associated, the viewport_exists + protocol error is raised. + + + + + + + + + An additional interface to a wl_surface object, which allows the + client to specify the cropping and scaling of the surface + contents. + + This interface works with two concepts: the source rectangle (src_x, + src_y, src_width, src_height), and the destination size (dst_width, + dst_height). The contents of the source rectangle are scaled to the + destination size, and content outside the source rectangle is ignored. + This state is double-buffered, and is applied on the next + wl_surface.commit. + + The two parts of crop and scale state are independent: the source + rectangle, and the destination size. Initially both are unset, that + is, no scaling is applied. The whole of the current wl_buffer is + used as the source, and the surface size is as defined in + wl_surface.attach. + + If the destination size is set, it causes the surface size to become + dst_width, dst_height. The source (rectangle) is scaled to exactly + this size. This overrides whatever the attached wl_buffer size is, + unless the wl_buffer is NULL. If the wl_buffer is NULL, the surface + has no content and therefore no size. Otherwise, the size is always + at least 1x1 in surface local coordinates. + + If the source rectangle is set, it defines what area of the wl_buffer is + taken as the source. If the source rectangle is set and the destination + size is not set, then src_width and src_height must be integers, and the + surface size becomes the source rectangle size. This results in cropping + without scaling. If src_width or src_height are not integers and + destination size is not set, the bad_size protocol error is raised when + the surface state is applied. + + The coordinate transformations from buffer pixel coordinates up to + the surface-local coordinates happen in the following order: + 1. buffer_transform (wl_surface.set_buffer_transform) + 2. buffer_scale (wl_surface.set_buffer_scale) + 3. crop and scale (wp_viewport.set*) + This means, that the source rectangle coordinates of crop and scale + are given in the coordinates after the buffer transform and scale, + i.e. in the coordinates that would be the surface-local coordinates + if the crop and scale was not applied. + + If src_x or src_y are negative, the bad_value protocol error is raised. + Otherwise, if the source rectangle is partially or completely outside of + the non-NULL wl_buffer, then the out_of_buffer protocol error is raised + when the surface state is applied. A NULL wl_buffer does not raise the + out_of_buffer error. + + If the wl_surface associated with the wp_viewport is destroyed, + all wp_viewport requests except 'destroy' raise the protocol error + no_surface. + + If the wp_viewport object is destroyed, the crop and scale + state is removed from the wl_surface. The change will be applied + on the next wl_surface.commit. + + + + + The associated wl_surface's crop and scale state is removed. + The change is applied on the next wl_surface.commit. + + + + + + + + + + + + + Set the source rectangle of the associated wl_surface. See + wp_viewport for the description, and relation to the wl_buffer + size. + + If all of x, y, width and height are -1.0, the source rectangle is + unset instead. Any other set of values where width or height are zero + or negative, or x or y are negative, raise the bad_value protocol + error. + + The crop and scale state is double-buffered state, and will be + applied on the next wl_surface.commit. + + + + + + + + + + Set the destination size of the associated wl_surface. See + wp_viewport for the description, and relation to the wl_buffer + size. + + If width is -1 and height is -1, the destination size is unset + instead. Any other pair of values for width and height that + contains zero or negative values raises the bad_value protocol + error. + + The crop and scale state is double-buffered state, and will be + applied on the next wl_surface.commit. + + + + + + + diff --git a/deps/wayland/wayland.xml b/deps/wayland/wayland.xml new file mode 100644 index 00000000..10e039d6 --- /dev/null +++ b/deps/wayland/wayland.xml @@ -0,0 +1,3151 @@ + + + + + Copyright © 2008-2011 Kristian Høgsberg + Copyright © 2010-2011 Intel Corporation + Copyright © 2012-2013 Collabora, Ltd. + + Permission is hereby granted, free of charge, to any person + obtaining a copy of this software and associated documentation files + (the "Software"), to deal in the Software without restriction, + including without limitation the rights to use, copy, modify, merge, + publish, distribute, sublicense, and/or sell copies of the Software, + and to permit persons to whom the Software is furnished to do so, + subject to the following conditions: + + The above copyright notice and this permission notice (including the + next paragraph) shall be included in all copies or substantial + portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + SOFTWARE. + + + + + The core global object. This is a special singleton object. It + is used for internal Wayland protocol features. + + + + + The sync request asks the server to emit the 'done' event + on the returned wl_callback object. Since requests are + handled in-order and events are delivered in-order, this can + be used as a barrier to ensure all previous requests and the + resulting events have been handled. + + The object returned by this request will be destroyed by the + compositor after the callback is fired and as such the client must not + attempt to use it after that point. + + The callback_data passed in the callback is the event serial. + + + + + + + This request creates a registry object that allows the client + to list and bind the global objects available from the + compositor. + + It should be noted that the server side resources consumed in + response to a get_registry request can only be released when the + client disconnects, not when the client side proxy is destroyed. + Therefore, clients should invoke get_registry as infrequently as + possible to avoid wasting memory. + + + + + + + The error event is sent out when a fatal (non-recoverable) + error has occurred. The object_id argument is the object + where the error occurred, most often in response to a request + to that object. The code identifies the error and is defined + by the object interface. As such, each interface defines its + own set of error codes. The message is a brief description + of the error, for (debugging) convenience. + + + + + + + + + These errors are global and can be emitted in response to any + server request. + + + + + + + + + + This event is used internally by the object ID management + logic. When a client deletes an object that it had created, + the server will send this event to acknowledge that it has + seen the delete request. When the client receives this event, + it will know that it can safely reuse the object ID. + + + + + + + + The singleton global registry object. The server has a number of + global objects that are available to all clients. These objects + typically represent an actual object in the server (for example, + an input device) or they are singleton objects that provide + extension functionality. + + When a client creates a registry object, the registry object + will emit a global event for each global currently in the + registry. Globals come and go as a result of device or + monitor hotplugs, reconfiguration or other events, and the + registry will send out global and global_remove events to + keep the client up to date with the changes. To mark the end + of the initial burst of events, the client can use the + wl_display.sync request immediately after calling + wl_display.get_registry. + + A client can bind to a global object by using the bind + request. This creates a client-side handle that lets the object + emit events to the client and lets the client invoke requests on + the object. + + + + + Binds a new, client-created object to the server using the + specified name as the identifier. + + + + + + + + Notify the client of global objects. + + The event notifies the client that a global object with + the given name is now available, and it implements the + given version of the given interface. + + + + + + + + + Notify the client of removed global objects. + + This event notifies the client that the global identified + by name is no longer available. If the client bound to + the global using the bind request, the client should now + destroy that object. + + The object remains valid and requests to the object will be + ignored until the client destroys it, to avoid races between + the global going away and a client sending a request to it. + + + + + + + + Clients can handle the 'done' event to get notified when + the related request is done. + + Note, because wl_callback objects are created from multiple independent + factory interfaces, the wl_callback interface is frozen at version 1. + + + + + Notify the client when the related request is done. + + + + + + + + A compositor. This object is a singleton global. The + compositor is in charge of combining the contents of multiple + surfaces into one displayable output. + + + + + Ask the compositor to create a new surface. + + + + + + + Ask the compositor to create a new region. + + + + + + + + The wl_shm_pool object encapsulates a piece of memory shared + between the compositor and client. Through the wl_shm_pool + object, the client can allocate shared memory wl_buffer objects. + All objects created through the same pool share the same + underlying mapped memory. Reusing the mapped memory avoids the + setup/teardown overhead and is useful when interactively resizing + a surface or for many small buffers. + + + + + Create a wl_buffer object from the pool. + + The buffer is created offset bytes into the pool and has + width and height as specified. The stride argument specifies + the number of bytes from the beginning of one row to the beginning + of the next. The format is the pixel format of the buffer and + must be one of those advertised through the wl_shm.format event. + + A buffer will keep a reference to the pool it was created from + so it is valid to destroy the pool immediately after creating + a buffer from it. + + + + + + + + + + + + Destroy the shared memory pool. + + The mmapped memory will be released when all + buffers that have been created from this pool + are gone. + + + + + + This request will cause the server to remap the backing memory + for the pool from the file descriptor passed when the pool was + created, but using the new size. This request can only be + used to make the pool bigger. + + This request only changes the amount of bytes that are mmapped + by the server and does not touch the file corresponding to the + file descriptor passed at creation time. It is the client's + responsibility to ensure that the file is at least as big as + the new pool size. + + + + + + + + A singleton global object that provides support for shared + memory. + + Clients can create wl_shm_pool objects using the create_pool + request. + + On binding the wl_shm object one or more format events + are emitted to inform clients about the valid pixel formats + that can be used for buffers. + + + + + These errors can be emitted in response to wl_shm requests. + + + + + + + + + This describes the memory layout of an individual pixel. + + All renderers should support argb8888 and xrgb8888 but any other + formats are optional and may not be supported by the particular + renderer in use. + + The drm format codes match the macros defined in drm_fourcc.h, except + argb8888 and xrgb8888. The formats actually supported by the compositor + will be reported by the format event. + + For all wl_shm formats and unless specified in another protocol + extension, pre-multiplied alpha is used for pixel values. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Create a new wl_shm_pool object. + + The pool can be used to create shared memory based buffer + objects. The server will mmap size bytes of the passed file + descriptor, to use as backing memory for the pool. + + + + + + + + + Informs the client about a valid pixel format that + can be used for buffers. Known formats include + argb8888 and xrgb8888. + + + + + + + + A buffer provides the content for a wl_surface. Buffers are + created through factory interfaces such as wl_shm, wp_linux_buffer_params + (from the linux-dmabuf protocol extension) or similar. It has a width and + a height and can be attached to a wl_surface, but the mechanism by which a + client provides and updates the contents is defined by the buffer factory + interface. + + If the buffer uses a format that has an alpha channel, the alpha channel + is assumed to be premultiplied in the color channels unless otherwise + specified. + + Note, because wl_buffer objects are created from multiple independent + factory interfaces, the wl_buffer interface is frozen at version 1. + + + + + Destroy a buffer. If and how you need to release the backing + storage is defined by the buffer factory interface. + + For possible side-effects to a surface, see wl_surface.attach. + + + + + + Sent when this wl_buffer is no longer used by the compositor. + The client is now free to reuse or destroy this buffer and its + backing storage. + + If a client receives a release event before the frame callback + requested in the same wl_surface.commit that attaches this + wl_buffer to a surface, then the client is immediately free to + reuse the buffer and its backing storage, and does not need a + second buffer for the next surface content update. Typically + this is possible, when the compositor maintains a copy of the + wl_surface contents, e.g. as a GL texture. This is an important + optimization for GL(ES) compositors with wl_shm clients. + + + + + + + A wl_data_offer represents a piece of data offered for transfer + by another client (the source client). It is used by the + copy-and-paste and drag-and-drop mechanisms. The offer + describes the different mime types that the data can be + converted to and provides the mechanism for transferring the + data directly from the source client. + + + + + + + + + + + + Indicate that the client can accept the given mime type, or + NULL for not accepted. + + For objects of version 2 or older, this request is used by the + client to give feedback whether the client can receive the given + mime type, or NULL if none is accepted; the feedback does not + determine whether the drag-and-drop operation succeeds or not. + + For objects of version 3 or newer, this request determines the + final result of the drag-and-drop operation. If the end result + is that no mime types were accepted, the drag-and-drop operation + will be cancelled and the corresponding drag source will receive + wl_data_source.cancelled. Clients may still use this event in + conjunction with wl_data_source.action for feedback. + + + + + + + + To transfer the offered data, the client issues this request + and indicates the mime type it wants to receive. The transfer + happens through the passed file descriptor (typically created + with the pipe system call). The source client writes the data + in the mime type representation requested and then closes the + file descriptor. + + The receiving client reads from the read end of the pipe until + EOF and then closes its end, at which point the transfer is + complete. + + This request may happen multiple times for different mime types, + both before and after wl_data_device.drop. Drag-and-drop destination + clients may preemptively fetch data or examine it more closely to + determine acceptance. + + + + + + + + Destroy the data offer. + + + + + + Sent immediately after creating the wl_data_offer object. One + event per offered mime type. + + + + + + + + + Notifies the compositor that the drag destination successfully + finished the drag-and-drop operation. + + Upon receiving this request, the compositor will emit + wl_data_source.dnd_finished on the drag source client. + + It is a client error to perform other requests than + wl_data_offer.destroy after this one. It is also an error to perform + this request after a NULL mime type has been set in + wl_data_offer.accept or no action was received through + wl_data_offer.action. + + If wl_data_offer.finish request is received for a non drag and drop + operation, the invalid_finish protocol error is raised. + + + + + + Sets the actions that the destination side client supports for + this operation. This request may trigger the emission of + wl_data_source.action and wl_data_offer.action events if the compositor + needs to change the selected action. + + This request can be called multiple times throughout the + drag-and-drop operation, typically in response to wl_data_device.enter + or wl_data_device.motion events. + + This request determines the final result of the drag-and-drop + operation. If the end result is that no action is accepted, + the drag source will receive wl_data_source.cancelled. + + The dnd_actions argument must contain only values expressed in the + wl_data_device_manager.dnd_actions enum, and the preferred_action + argument must only contain one of those values set, otherwise it + will result in a protocol error. + + While managing an "ask" action, the destination drag-and-drop client + may perform further wl_data_offer.receive requests, and is expected + to perform one last wl_data_offer.set_actions request with a preferred + action other than "ask" (and optionally wl_data_offer.accept) before + requesting wl_data_offer.finish, in order to convey the action selected + by the user. If the preferred action is not in the + wl_data_offer.source_actions mask, an error will be raised. + + If the "ask" action is dismissed (e.g. user cancellation), the client + is expected to perform wl_data_offer.destroy right away. + + This request can only be made on drag-and-drop offers, a protocol error + will be raised otherwise. + + + + + + + + This event indicates the actions offered by the data source. It + will be sent immediately after creating the wl_data_offer object, + or anytime the source side changes its offered actions through + wl_data_source.set_actions. + + + + + + + This event indicates the action selected by the compositor after + matching the source/destination side actions. Only one action (or + none) will be offered here. + + This event can be emitted multiple times during the drag-and-drop + operation in response to destination side action changes through + wl_data_offer.set_actions. + + This event will no longer be emitted after wl_data_device.drop + happened on the drag-and-drop destination, the client must + honor the last action received, or the last preferred one set + through wl_data_offer.set_actions when handling an "ask" action. + + Compositors may also change the selected action on the fly, mainly + in response to keyboard modifier changes during the drag-and-drop + operation. + + The most recent action received is always the valid one. Prior to + receiving wl_data_device.drop, the chosen action may change (e.g. + due to keyboard modifiers being pressed). At the time of receiving + wl_data_device.drop the drag-and-drop destination must honor the + last action received. + + Action changes may still happen after wl_data_device.drop, + especially on "ask" actions, where the drag-and-drop destination + may choose another action afterwards. Action changes happening + at this stage are always the result of inter-client negotiation, the + compositor shall no longer be able to induce a different action. + + Upon "ask" actions, it is expected that the drag-and-drop destination + may potentially choose a different action and/or mime type, + based on wl_data_offer.source_actions and finally chosen by the + user (e.g. popping up a menu with the available options). The + final wl_data_offer.set_actions and wl_data_offer.accept requests + must happen before the call to wl_data_offer.finish. + + + + + + + + The wl_data_source object is the source side of a wl_data_offer. + It is created by the source client in a data transfer and + provides a way to describe the offered data and a way to respond + to requests to transfer the data. + + + + + + + + + + This request adds a mime type to the set of mime types + advertised to targets. Can be called several times to offer + multiple types. + + + + + + + Destroy the data source. + + + + + + Sent when a target accepts pointer_focus or motion events. If + a target does not accept any of the offered types, type is NULL. + + Used for feedback during drag-and-drop. + + + + + + + Request for data from the client. Send the data as the + specified mime type over the passed file descriptor, then + close it. + + + + + + + + This data source is no longer valid. There are several reasons why + this could happen: + + - The data source has been replaced by another data source. + - The drag-and-drop operation was performed, but the drop destination + did not accept any of the mime types offered through + wl_data_source.target. + - The drag-and-drop operation was performed, but the drop destination + did not select any of the actions present in the mask offered through + wl_data_source.action. + - The drag-and-drop operation was performed but didn't happen over a + surface. + - The compositor cancelled the drag-and-drop operation (e.g. compositor + dependent timeouts to avoid stale drag-and-drop transfers). + + The client should clean up and destroy this data source. + + For objects of version 2 or older, wl_data_source.cancelled will + only be emitted if the data source was replaced by another data + source. + + + + + + + + Sets the actions that the source side client supports for this + operation. This request may trigger wl_data_source.action and + wl_data_offer.action events if the compositor needs to change the + selected action. + + The dnd_actions argument must contain only values expressed in the + wl_data_device_manager.dnd_actions enum, otherwise it will result + in a protocol error. + + This request must be made once only, and can only be made on sources + used in drag-and-drop, so it must be performed before + wl_data_device.start_drag. Attempting to use the source other than + for drag-and-drop will raise a protocol error. + + + + + + + The user performed the drop action. This event does not indicate + acceptance, wl_data_source.cancelled may still be emitted afterwards + if the drop destination does not accept any mime type. + + However, this event might however not be received if the compositor + cancelled the drag-and-drop operation before this event could happen. + + Note that the data_source may still be used in the future and should + not be destroyed here. + + + + + + The drop destination finished interoperating with this data + source, so the client is now free to destroy this data source and + free all associated data. + + If the action used to perform the operation was "move", the + source can now delete the transferred data. + + + + + + This event indicates the action selected by the compositor after + matching the source/destination side actions. Only one action (or + none) will be offered here. + + This event can be emitted multiple times during the drag-and-drop + operation, mainly in response to destination side changes through + wl_data_offer.set_actions, and as the data device enters/leaves + surfaces. + + It is only possible to receive this event after + wl_data_source.dnd_drop_performed if the drag-and-drop operation + ended in an "ask" action, in which case the final wl_data_source.action + event will happen immediately before wl_data_source.dnd_finished. + + Compositors may also change the selected action on the fly, mainly + in response to keyboard modifier changes during the drag-and-drop + operation. + + The most recent action received is always the valid one. The chosen + action may change alongside negotiation (e.g. an "ask" action can turn + into a "move" operation), so the effects of the final action must + always be applied in wl_data_offer.dnd_finished. + + Clients can trigger cursor surface changes from this point, so + they reflect the current action. + + + + + + + + There is one wl_data_device per seat which can be obtained + from the global wl_data_device_manager singleton. + + A wl_data_device provides access to inter-client data transfer + mechanisms such as copy-and-paste and drag-and-drop. + + + + + + + + + This request asks the compositor to start a drag-and-drop + operation on behalf of the client. + + The source argument is the data source that provides the data + for the eventual data transfer. If source is NULL, enter, leave + and motion events are sent only to the client that initiated the + drag and the client is expected to handle the data passing + internally. If source is destroyed, the drag-and-drop session will be + cancelled. + + The origin surface is the surface where the drag originates and + the client must have an active implicit grab that matches the + serial. + + The icon surface is an optional (can be NULL) surface that + provides an icon to be moved around with the cursor. Initially, + the top-left corner of the icon surface is placed at the cursor + hotspot, but subsequent wl_surface.attach request can move the + relative position. Attach requests must be confirmed with + wl_surface.commit as usual. The icon surface is given the role of + a drag-and-drop icon. If the icon surface already has another role, + it raises a protocol error. + + The input region is ignored for wl_surfaces with the role of a + drag-and-drop icon. + + + + + + + + + + This request asks the compositor to set the selection + to the data from the source on behalf of the client. + + To unset the selection, set the source to NULL. + + + + + + + + The data_offer event introduces a new wl_data_offer object, + which will subsequently be used in either the + data_device.enter event (for drag-and-drop) or the + data_device.selection event (for selections). Immediately + following the data_device.data_offer event, the new data_offer + object will send out data_offer.offer events to describe the + mime types it offers. + + + + + + + This event is sent when an active drag-and-drop pointer enters + a surface owned by the client. The position of the pointer at + enter time is provided by the x and y arguments, in surface-local + coordinates. + + + + + + + + + + + This event is sent when the drag-and-drop pointer leaves the + surface and the session ends. The client must destroy the + wl_data_offer introduced at enter time at this point. + + + + + + This event is sent when the drag-and-drop pointer moves within + the currently focused surface. The new position of the pointer + is provided by the x and y arguments, in surface-local + coordinates. + + + + + + + + + The event is sent when a drag-and-drop operation is ended + because the implicit grab is removed. + + The drag-and-drop destination is expected to honor the last action + received through wl_data_offer.action, if the resulting action is + "copy" or "move", the destination can still perform + wl_data_offer.receive requests, and is expected to end all + transfers with a wl_data_offer.finish request. + + If the resulting action is "ask", the action will not be considered + final. The drag-and-drop destination is expected to perform one last + wl_data_offer.set_actions request, or wl_data_offer.destroy in order + to cancel the operation. + + + + + + The selection event is sent out to notify the client of a new + wl_data_offer for the selection for this device. The + data_device.data_offer and the data_offer.offer events are + sent out immediately before this event to introduce the data + offer object. The selection event is sent to a client + immediately before receiving keyboard focus and when a new + selection is set while the client has keyboard focus. The + data_offer is valid until a new data_offer or NULL is received + or until the client loses keyboard focus. Switching surface with + keyboard focus within the same client doesn't mean a new selection + will be sent. The client must destroy the previous selection + data_offer, if any, upon receiving this event. + + + + + + + + + This request destroys the data device. + + + + + + + The wl_data_device_manager is a singleton global object that + provides access to inter-client data transfer mechanisms such as + copy-and-paste and drag-and-drop. These mechanisms are tied to + a wl_seat and this interface lets a client get a wl_data_device + corresponding to a wl_seat. + + Depending on the version bound, the objects created from the bound + wl_data_device_manager object will have different requirements for + functioning properly. See wl_data_source.set_actions, + wl_data_offer.accept and wl_data_offer.finish for details. + + + + + Create a new data source. + + + + + + + Create a new data device for a given seat. + + + + + + + + + + This is a bitmask of the available/preferred actions in a + drag-and-drop operation. + + In the compositor, the selected action is a result of matching the + actions offered by the source and destination sides. "action" events + with a "none" action will be sent to both source and destination if + there is no match. All further checks will effectively happen on + (source actions ∩ destination actions). + + In addition, compositors may also pick different actions in + reaction to key modifiers being pressed. One common design that + is used in major toolkits (and the behavior recommended for + compositors) is: + + - If no modifiers are pressed, the first match (in bit order) + will be used. + - Pressing Shift selects "move", if enabled in the mask. + - Pressing Control selects "copy", if enabled in the mask. + + Behavior beyond that is considered implementation-dependent. + Compositors may for example bind other modifiers (like Alt/Meta) + or drags initiated with other buttons than BTN_LEFT to specific + actions (e.g. "ask"). + + + + + + + + + + + This interface is implemented by servers that provide + desktop-style user interfaces. + + It allows clients to associate a wl_shell_surface with + a basic surface. + + Note! This protocol is deprecated and not intended for production use. + For desktop-style user interfaces, use xdg_shell. Compositors and clients + should not implement this interface. + + + + + + + + + Create a shell surface for an existing surface. This gives + the wl_surface the role of a shell surface. If the wl_surface + already has another role, it raises a protocol error. + + Only one shell surface can be associated with a given surface. + + + + + + + + + An interface that may be implemented by a wl_surface, for + implementations that provide a desktop-style user interface. + + It provides requests to treat surfaces like toplevel, fullscreen + or popup windows, move, resize or maximize them, associate + metadata like title and class, etc. + + On the server side the object is automatically destroyed when + the related wl_surface is destroyed. On the client side, + wl_shell_surface_destroy() must be called before destroying + the wl_surface object. + + + + + A client must respond to a ping event with a pong request or + the client may be deemed unresponsive. + + + + + + + Start a pointer-driven move of the surface. + + This request must be used in response to a button press event. + The server may ignore move requests depending on the state of + the surface (e.g. fullscreen or maximized). + + + + + + + + These values are used to indicate which edge of a surface + is being dragged in a resize operation. The server may + use this information to adapt its behavior, e.g. choose + an appropriate cursor image. + + + + + + + + + + + + + + + Start a pointer-driven resizing of the surface. + + This request must be used in response to a button press event. + The server may ignore resize requests depending on the state of + the surface (e.g. fullscreen or maximized). + + + + + + + + + Map the surface as a toplevel surface. + + A toplevel surface is not fullscreen, maximized or transient. + + + + + + These flags specify details of the expected behaviour + of transient surfaces. Used in the set_transient request. + + + + + + + Map the surface relative to an existing surface. + + The x and y arguments specify the location of the upper left + corner of the surface relative to the upper left corner of the + parent surface, in surface-local coordinates. + + The flags argument controls details of the transient behaviour. + + + + + + + + + + Hints to indicate to the compositor how to deal with a conflict + between the dimensions of the surface and the dimensions of the + output. The compositor is free to ignore this parameter. + + + + + + + + + + Map the surface as a fullscreen surface. + + If an output parameter is given then the surface will be made + fullscreen on that output. If the client does not specify the + output then the compositor will apply its policy - usually + choosing the output on which the surface has the biggest surface + area. + + The client may specify a method to resolve a size conflict + between the output size and the surface size - this is provided + through the method parameter. + + The framerate parameter is used only when the method is set + to "driver", to indicate the preferred framerate. A value of 0 + indicates that the client does not care about framerate. The + framerate is specified in mHz, that is framerate of 60000 is 60Hz. + + A method of "scale" or "driver" implies a scaling operation of + the surface, either via a direct scaling operation or a change of + the output mode. This will override any kind of output scaling, so + that mapping a surface with a buffer size equal to the mode can + fill the screen independent of buffer_scale. + + A method of "fill" means we don't scale up the buffer, however + any output scale is applied. This means that you may run into + an edge case where the application maps a buffer with the same + size of the output mode but buffer_scale 1 (thus making a + surface larger than the output). In this case it is allowed to + downscale the results to fit the screen. + + The compositor must reply to this request with a configure event + with the dimensions for the output on which the surface will + be made fullscreen. + + + + + + + + + Map the surface as a popup. + + A popup surface is a transient surface with an added pointer + grab. + + An existing implicit grab will be changed to owner-events mode, + and the popup grab will continue after the implicit grab ends + (i.e. releasing the mouse button does not cause the popup to + be unmapped). + + The popup grab continues until the window is destroyed or a + mouse button is pressed in any other client's window. A click + in any of the client's surfaces is reported as normal, however, + clicks in other clients' surfaces will be discarded and trigger + the callback. + + The x and y arguments specify the location of the upper left + corner of the surface relative to the upper left corner of the + parent surface, in surface-local coordinates. + + + + + + + + + + + + Map the surface as a maximized surface. + + If an output parameter is given then the surface will be + maximized on that output. If the client does not specify the + output then the compositor will apply its policy - usually + choosing the output on which the surface has the biggest surface + area. + + The compositor will reply with a configure event telling + the expected new surface size. The operation is completed + on the next buffer attach to this surface. + + A maximized surface typically fills the entire output it is + bound to, except for desktop elements such as panels. This is + the main difference between a maximized shell surface and a + fullscreen shell surface. + + The details depend on the compositor implementation. + + + + + + + Set a short title for the surface. + + This string may be used to identify the surface in a task bar, + window list, or other user interface elements provided by the + compositor. + + The string must be encoded in UTF-8. + + + + + + + Set a class for the surface. + + The surface class identifies the general class of applications + to which the surface belongs. A common convention is to use the + file name (or the full path if it is a non-standard location) of + the application's .desktop file as the class. + + + + + + + Ping a client to check if it is receiving events and sending + requests. A client is expected to reply with a pong request. + + + + + + + The configure event asks the client to resize its surface. + + The size is a hint, in the sense that the client is free to + ignore it if it doesn't resize, pick a smaller size (to + satisfy aspect ratio or resize in steps of NxM pixels). + + The edges parameter provides a hint about how the surface + was resized. The client may use this information to decide + how to adjust its content to the new size (e.g. a scrolling + area might adjust its content position to leave the viewable + content unmoved). + + The client is free to dismiss all but the last configure + event it received. + + The width and height arguments specify the size of the window + in surface-local coordinates. + + + + + + + + + The popup_done event is sent out when a popup grab is broken, + that is, when the user clicks a surface that doesn't belong + to the client owning the popup surface. + + + + + + + A surface is a rectangular area that may be displayed on zero + or more outputs, and shown any number of times at the compositor's + discretion. They can present wl_buffers, receive user input, and + define a local coordinate system. + + The size of a surface (and relative positions on it) is described + in surface-local coordinates, which may differ from the buffer + coordinates of the pixel content, in case a buffer_transform + or a buffer_scale is used. + + A surface without a "role" is fairly useless: a compositor does + not know where, when or how to present it. The role is the + purpose of a wl_surface. Examples of roles are a cursor for a + pointer (as set by wl_pointer.set_cursor), a drag icon + (wl_data_device.start_drag), a sub-surface + (wl_subcompositor.get_subsurface), and a window as defined by a + shell protocol (e.g. wl_shell.get_shell_surface). + + A surface can have only one role at a time. Initially a + wl_surface does not have a role. Once a wl_surface is given a + role, it is set permanently for the whole lifetime of the + wl_surface object. Giving the current role again is allowed, + unless explicitly forbidden by the relevant interface + specification. + + Surface roles are given by requests in other interfaces such as + wl_pointer.set_cursor. The request should explicitly mention + that this request gives a role to a wl_surface. Often, this + request also creates a new protocol object that represents the + role and adds additional functionality to wl_surface. When a + client wants to destroy a wl_surface, they must destroy this role + object before the wl_surface, otherwise a defunct_role_object error is + sent. + + Destroying the role object does not remove the role from the + wl_surface, but it may stop the wl_surface from "playing the role". + For instance, if a wl_subsurface object is destroyed, the wl_surface + it was created for will be unmapped and forget its position and + z-order. It is allowed to create a wl_subsurface for the same + wl_surface again, but it is not allowed to use the wl_surface as + a cursor (cursor is a different role than sub-surface, and role + switching is not allowed). + + + + + These errors can be emitted in response to wl_surface requests. + + + + + + + + + + + Deletes the surface and invalidates its object ID. + + + + + + Set a buffer as the content of this surface. + + The new size of the surface is calculated based on the buffer + size transformed by the inverse buffer_transform and the + inverse buffer_scale. This means that at commit time the supplied + buffer size must be an integer multiple of the buffer_scale. If + that's not the case, an invalid_size error is sent. + + The x and y arguments specify the location of the new pending + buffer's upper left corner, relative to the current buffer's upper + left corner, in surface-local coordinates. In other words, the + x and y, combined with the new surface size define in which + directions the surface's size changes. Setting anything other than 0 + as x and y arguments is discouraged, and should instead be replaced + with using the separate wl_surface.offset request. + + When the bound wl_surface version is 5 or higher, passing any + non-zero x or y is a protocol violation, and will result in an + 'invalid_offset' error being raised. The x and y arguments are ignored + and do not change the pending state. To achieve equivalent semantics, + use wl_surface.offset. + + Surface contents are double-buffered state, see wl_surface.commit. + + The initial surface contents are void; there is no content. + wl_surface.attach assigns the given wl_buffer as the pending + wl_buffer. wl_surface.commit makes the pending wl_buffer the new + surface contents, and the size of the surface becomes the size + calculated from the wl_buffer, as described above. After commit, + there is no pending buffer until the next attach. + + Committing a pending wl_buffer allows the compositor to read the + pixels in the wl_buffer. The compositor may access the pixels at + any time after the wl_surface.commit request. When the compositor + will not access the pixels anymore, it will send the + wl_buffer.release event. Only after receiving wl_buffer.release, + the client may reuse the wl_buffer. A wl_buffer that has been + attached and then replaced by another attach instead of committed + will not receive a release event, and is not used by the + compositor. + + If a pending wl_buffer has been committed to more than one wl_surface, + the delivery of wl_buffer.release events becomes undefined. A well + behaved client should not rely on wl_buffer.release events in this + case. Alternatively, a client could create multiple wl_buffer objects + from the same backing storage or use wp_linux_buffer_release. + + Destroying the wl_buffer after wl_buffer.release does not change + the surface contents. Destroying the wl_buffer before wl_buffer.release + is allowed as long as the underlying buffer storage isn't re-used (this + can happen e.g. on client process termination). However, if the client + destroys the wl_buffer before receiving the wl_buffer.release event and + mutates the underlying buffer storage, the surface contents become + undefined immediately. + + If wl_surface.attach is sent with a NULL wl_buffer, the + following wl_surface.commit will remove the surface content. + + + + + + + + + This request is used to describe the regions where the pending + buffer is different from the current surface contents, and where + the surface therefore needs to be repainted. The compositor + ignores the parts of the damage that fall outside of the surface. + + Damage is double-buffered state, see wl_surface.commit. + + The damage rectangle is specified in surface-local coordinates, + where x and y specify the upper left corner of the damage rectangle. + + The initial value for pending damage is empty: no damage. + wl_surface.damage adds pending damage: the new pending damage + is the union of old pending damage and the given rectangle. + + wl_surface.commit assigns pending damage as the current damage, + and clears pending damage. The server will clear the current + damage as it repaints the surface. + + Note! New clients should not use this request. Instead damage can be + posted with wl_surface.damage_buffer which uses buffer coordinates + instead of surface coordinates. + + + + + + + + + + Request a notification when it is a good time to start drawing a new + frame, by creating a frame callback. This is useful for throttling + redrawing operations, and driving animations. + + When a client is animating on a wl_surface, it can use the 'frame' + request to get notified when it is a good time to draw and commit the + next frame of animation. If the client commits an update earlier than + that, it is likely that some updates will not make it to the display, + and the client is wasting resources by drawing too often. + + The frame request will take effect on the next wl_surface.commit. + The notification will only be posted for one frame unless + requested again. For a wl_surface, the notifications are posted in + the order the frame requests were committed. + + The server must send the notifications so that a client + will not send excessive updates, while still allowing + the highest possible update rate for clients that wait for the reply + before drawing again. The server should give some time for the client + to draw and commit after sending the frame callback events to let it + hit the next output refresh. + + A server should avoid signaling the frame callbacks if the + surface is not visible in any way, e.g. the surface is off-screen, + or completely obscured by other opaque surfaces. + + The object returned by this request will be destroyed by the + compositor after the callback is fired and as such the client must not + attempt to use it after that point. + + The callback_data passed in the callback is the current time, in + milliseconds, with an undefined base. + + + + + + + This request sets the region of the surface that contains + opaque content. + + The opaque region is an optimization hint for the compositor + that lets it optimize the redrawing of content behind opaque + regions. Setting an opaque region is not required for correct + behaviour, but marking transparent content as opaque will result + in repaint artifacts. + + The opaque region is specified in surface-local coordinates. + + The compositor ignores the parts of the opaque region that fall + outside of the surface. + + Opaque region is double-buffered state, see wl_surface.commit. + + wl_surface.set_opaque_region changes the pending opaque region. + wl_surface.commit copies the pending region to the current region. + Otherwise, the pending and current regions are never changed. + + The initial value for an opaque region is empty. Setting the pending + opaque region has copy semantics, and the wl_region object can be + destroyed immediately. A NULL wl_region causes the pending opaque + region to be set to empty. + + + + + + + This request sets the region of the surface that can receive + pointer and touch events. + + Input events happening outside of this region will try the next + surface in the server surface stack. The compositor ignores the + parts of the input region that fall outside of the surface. + + The input region is specified in surface-local coordinates. + + Input region is double-buffered state, see wl_surface.commit. + + wl_surface.set_input_region changes the pending input region. + wl_surface.commit copies the pending region to the current region. + Otherwise the pending and current regions are never changed, + except cursor and icon surfaces are special cases, see + wl_pointer.set_cursor and wl_data_device.start_drag. + + The initial value for an input region is infinite. That means the + whole surface will accept input. Setting the pending input region + has copy semantics, and the wl_region object can be destroyed + immediately. A NULL wl_region causes the input region to be set + to infinite. + + + + + + + Surface state (input, opaque, and damage regions, attached buffers, + etc.) is double-buffered. Protocol requests modify the pending state, + as opposed to the current state in use by the compositor. A commit + request atomically applies all pending state, replacing the current + state. After commit, the new pending state is as documented for each + related request. + + On commit, a pending wl_buffer is applied first, and all other state + second. This means that all coordinates in double-buffered state are + relative to the new wl_buffer coming into use, except for + wl_surface.attach itself. If there is no pending wl_buffer, the + coordinates are relative to the current surface contents. + + All requests that need a commit to become effective are documented + to affect double-buffered state. + + Other interfaces may add further double-buffered surface state. + + + + + + This is emitted whenever a surface's creation, movement, or resizing + results in some part of it being within the scanout region of an + output. + + Note that a surface may be overlapping with zero or more outputs. + + + + + + + This is emitted whenever a surface's creation, movement, or resizing + results in it no longer having any part of it within the scanout region + of an output. + + Clients should not use the number of outputs the surface is on for frame + throttling purposes. The surface might be hidden even if no leave event + has been sent, and the compositor might expect new surface content + updates even if no enter event has been sent. The frame event should be + used instead. + + + + + + + + + This request sets an optional transformation on how the compositor + interprets the contents of the buffer attached to the surface. The + accepted values for the transform parameter are the values for + wl_output.transform. + + Buffer transform is double-buffered state, see wl_surface.commit. + + A newly created surface has its buffer transformation set to normal. + + wl_surface.set_buffer_transform changes the pending buffer + transformation. wl_surface.commit copies the pending buffer + transformation to the current one. Otherwise, the pending and current + values are never changed. + + The purpose of this request is to allow clients to render content + according to the output transform, thus permitting the compositor to + use certain optimizations even if the display is rotated. Using + hardware overlays and scanning out a client buffer for fullscreen + surfaces are examples of such optimizations. Those optimizations are + highly dependent on the compositor implementation, so the use of this + request should be considered on a case-by-case basis. + + Note that if the transform value includes 90 or 270 degree rotation, + the width of the buffer will become the surface height and the height + of the buffer will become the surface width. + + If transform is not one of the values from the + wl_output.transform enum the invalid_transform protocol error + is raised. + + + + + + + + + This request sets an optional scaling factor on how the compositor + interprets the contents of the buffer attached to the window. + + Buffer scale is double-buffered state, see wl_surface.commit. + + A newly created surface has its buffer scale set to 1. + + wl_surface.set_buffer_scale changes the pending buffer scale. + wl_surface.commit copies the pending buffer scale to the current one. + Otherwise, the pending and current values are never changed. + + The purpose of this request is to allow clients to supply higher + resolution buffer data for use on high resolution outputs. It is + intended that you pick the same buffer scale as the scale of the + output that the surface is displayed on. This means the compositor + can avoid scaling when rendering the surface on that output. + + Note that if the scale is larger than 1, then you have to attach + a buffer that is larger (by a factor of scale in each dimension) + than the desired surface size. + + If scale is not positive the invalid_scale protocol error is + raised. + + + + + + + + This request is used to describe the regions where the pending + buffer is different from the current surface contents, and where + the surface therefore needs to be repainted. The compositor + ignores the parts of the damage that fall outside of the surface. + + Damage is double-buffered state, see wl_surface.commit. + + The damage rectangle is specified in buffer coordinates, + where x and y specify the upper left corner of the damage rectangle. + + The initial value for pending damage is empty: no damage. + wl_surface.damage_buffer adds pending damage: the new pending + damage is the union of old pending damage and the given rectangle. + + wl_surface.commit assigns pending damage as the current damage, + and clears pending damage. The server will clear the current + damage as it repaints the surface. + + This request differs from wl_surface.damage in only one way - it + takes damage in buffer coordinates instead of surface-local + coordinates. While this generally is more intuitive than surface + coordinates, it is especially desirable when using wp_viewport + or when a drawing library (like EGL) is unaware of buffer scale + and buffer transform. + + Note: Because buffer transformation changes and damage requests may + be interleaved in the protocol stream, it is impossible to determine + the actual mapping between surface and buffer damage until + wl_surface.commit time. Therefore, compositors wishing to take both + kinds of damage into account will have to accumulate damage from the + two requests separately and only transform from one to the other + after receiving the wl_surface.commit. + + + + + + + + + + + + The x and y arguments specify the location of the new pending + buffer's upper left corner, relative to the current buffer's upper + left corner, in surface-local coordinates. In other words, the + x and y, combined with the new surface size define in which + directions the surface's size changes. + + Surface location offset is double-buffered state, see + wl_surface.commit. + + This request is semantically equivalent to and the replaces the x and y + arguments in the wl_surface.attach request in wl_surface versions prior + to 5. See wl_surface.attach for details. + + + + + + + + + + This event indicates the preferred buffer scale for this surface. It is + sent whenever the compositor's preference changes. + + It is intended that scaling aware clients use this event to scale their + content and use wl_surface.set_buffer_scale to indicate the scale they + have rendered with. This allows clients to supply a higher detail + buffer. + + + + + + + This event indicates the preferred buffer transform for this surface. + It is sent whenever the compositor's preference changes. + + It is intended that transform aware clients use this event to apply the + transform to their content and use wl_surface.set_buffer_transform to + indicate the transform they have rendered with. + + + + + + + + A seat is a group of keyboards, pointer and touch devices. This + object is published as a global during start up, or when such a + device is hot plugged. A seat typically has a pointer and + maintains a keyboard focus and a pointer focus. + + + + + This is a bitmask of capabilities this seat has; if a member is + set, then it is present on the seat. + + + + + + + + + These errors can be emitted in response to wl_seat requests. + + + + + + + This is emitted whenever a seat gains or loses the pointer, + keyboard or touch capabilities. The argument is a capability + enum containing the complete set of capabilities this seat has. + + When the pointer capability is added, a client may create a + wl_pointer object using the wl_seat.get_pointer request. This object + will receive pointer events until the capability is removed in the + future. + + When the pointer capability is removed, a client should destroy the + wl_pointer objects associated with the seat where the capability was + removed, using the wl_pointer.release request. No further pointer + events will be received on these objects. + + In some compositors, if a seat regains the pointer capability and a + client has a previously obtained wl_pointer object of version 4 or + less, that object may start sending pointer events again. This + behavior is considered a misinterpretation of the intended behavior + and must not be relied upon by the client. wl_pointer objects of + version 5 or later must not send events if created before the most + recent event notifying the client of an added pointer capability. + + The above behavior also applies to wl_keyboard and wl_touch with the + keyboard and touch capabilities, respectively. + + + + + + + The ID provided will be initialized to the wl_pointer interface + for this seat. + + This request only takes effect if the seat has the pointer + capability, or has had the pointer capability in the past. + It is a protocol violation to issue this request on a seat that has + never had the pointer capability. The missing_capability error will + be sent in this case. + + + + + + + The ID provided will be initialized to the wl_keyboard interface + for this seat. + + This request only takes effect if the seat has the keyboard + capability, or has had the keyboard capability in the past. + It is a protocol violation to issue this request on a seat that has + never had the keyboard capability. The missing_capability error will + be sent in this case. + + + + + + + The ID provided will be initialized to the wl_touch interface + for this seat. + + This request only takes effect if the seat has the touch + capability, or has had the touch capability in the past. + It is a protocol violation to issue this request on a seat that has + never had the touch capability. The missing_capability error will + be sent in this case. + + + + + + + + + In a multi-seat configuration the seat name can be used by clients to + help identify which physical devices the seat represents. + + The seat name is a UTF-8 string with no convention defined for its + contents. Each name is unique among all wl_seat globals. The name is + only guaranteed to be unique for the current compositor instance. + + The same seat names are used for all clients. Thus, the name can be + shared across processes to refer to a specific wl_seat global. + + The name event is sent after binding to the seat global. This event is + only sent once per seat object, and the name does not change over the + lifetime of the wl_seat global. + + Compositors may re-use the same seat name if the wl_seat global is + destroyed and re-created later. + + + + + + + + + Using this request a client can tell the server that it is not going to + use the seat object anymore. + + + + + + + + The wl_pointer interface represents one or more input devices, + such as mice, which control the pointer location and pointer_focus + of a seat. + + The wl_pointer interface generates motion, enter and leave + events for the surfaces that the pointer is located over, + and button and axis events for button presses, button releases + and scrolling. + + + + + + + + + Set the pointer surface, i.e., the surface that contains the + pointer image (cursor). This request gives the surface the role + of a cursor. If the surface already has another role, it raises + a protocol error. + + The cursor actually changes only if the pointer + focus for this device is one of the requesting client's surfaces + or the surface parameter is the current pointer surface. If + there was a previous surface set with this request it is + replaced. If surface is NULL, the pointer image is hidden. + + The parameters hotspot_x and hotspot_y define the position of + the pointer surface relative to the pointer location. Its + top-left corner is always at (x, y) - (hotspot_x, hotspot_y), + where (x, y) are the coordinates of the pointer location, in + surface-local coordinates. + + On surface.attach requests to the pointer surface, hotspot_x + and hotspot_y are decremented by the x and y parameters + passed to the request. Attach must be confirmed by + wl_surface.commit as usual. + + The hotspot can also be updated by passing the currently set + pointer surface to this request with new values for hotspot_x + and hotspot_y. + + The input region is ignored for wl_surfaces with the role of + a cursor. When the use as a cursor ends, the wl_surface is + unmapped. + + The serial parameter must match the latest wl_pointer.enter + serial number sent to the client. Otherwise the request will be + ignored. + + + + + + + + + + Notification that this seat's pointer is focused on a certain + surface. + + When a seat's focus enters a surface, the pointer image + is undefined and a client should respond to this event by setting + an appropriate pointer image with the set_cursor request. + + + + + + + + + + Notification that this seat's pointer is no longer focused on + a certain surface. + + The leave notification is sent before the enter notification + for the new focus. + + + + + + + + Notification of pointer location change. The arguments + surface_x and surface_y are the location relative to the + focused surface. + + + + + + + + + Describes the physical state of a button that produced the button + event. + + + + + + + + Mouse button click and release notifications. + + The location of the click is given by the last motion or + enter event. + The time argument is a timestamp with millisecond + granularity, with an undefined base. + + The button is a button code as defined in the Linux kernel's + linux/input-event-codes.h header file, e.g. BTN_LEFT. + + Any 16-bit button code value is reserved for future additions to the + kernel's event code list. All other button codes above 0xFFFF are + currently undefined but may be used in future versions of this + protocol. + + + + + + + + + + Describes the axis types of scroll events. + + + + + + + + Scroll and other axis notifications. + + For scroll events (vertical and horizontal scroll axes), the + value parameter is the length of a vector along the specified + axis in a coordinate space identical to those of motion events, + representing a relative movement along the specified axis. + + For devices that support movements non-parallel to axes multiple + axis events will be emitted. + + When applicable, for example for touch pads, the server can + choose to emit scroll events where the motion vector is + equivalent to a motion event vector. + + When applicable, a client can transform its content relative to the + scroll distance. + + + + + + + + + + + Using this request a client can tell the server that it is not going to + use the pointer object anymore. + + This request destroys the pointer proxy object, so clients must not call + wl_pointer_destroy() after using this request. + + + + + + + + Indicates the end of a set of events that logically belong together. + A client is expected to accumulate the data in all events within the + frame before proceeding. + + All wl_pointer events before a wl_pointer.frame event belong + logically together. For example, in a diagonal scroll motion the + compositor will send an optional wl_pointer.axis_source event, two + wl_pointer.axis events (horizontal and vertical) and finally a + wl_pointer.frame event. The client may use this information to + calculate a diagonal vector for scrolling. + + When multiple wl_pointer.axis events occur within the same frame, + the motion vector is the combined motion of all events. + When a wl_pointer.axis and a wl_pointer.axis_stop event occur within + the same frame, this indicates that axis movement in one axis has + stopped but continues in the other axis. + When multiple wl_pointer.axis_stop events occur within the same + frame, this indicates that these axes stopped in the same instance. + + A wl_pointer.frame event is sent for every logical event group, + even if the group only contains a single wl_pointer event. + Specifically, a client may get a sequence: motion, frame, button, + frame, axis, frame, axis_stop, frame. + + The wl_pointer.enter and wl_pointer.leave events are logical events + generated by the compositor and not the hardware. These events are + also grouped by a wl_pointer.frame. When a pointer moves from one + surface to another, a compositor should group the + wl_pointer.leave event within the same wl_pointer.frame. + However, a client must not rely on wl_pointer.leave and + wl_pointer.enter being in the same wl_pointer.frame. + Compositor-specific policies may require the wl_pointer.leave and + wl_pointer.enter event being split across multiple wl_pointer.frame + groups. + + + + + + Describes the source types for axis events. This indicates to the + client how an axis event was physically generated; a client may + adjust the user interface accordingly. For example, scroll events + from a "finger" source may be in a smooth coordinate space with + kinetic scrolling whereas a "wheel" source may be in discrete steps + of a number of lines. + + The "continuous" axis source is a device generating events in a + continuous coordinate space, but using something other than a + finger. One example for this source is button-based scrolling where + the vertical motion of a device is converted to scroll events while + a button is held down. + + The "wheel tilt" axis source indicates that the actual device is a + wheel but the scroll event is not caused by a rotation but a + (usually sideways) tilt of the wheel. + + + + + + + + + + Source information for scroll and other axes. + + This event does not occur on its own. It is sent before a + wl_pointer.frame event and carries the source information for + all events within that frame. + + The source specifies how this event was generated. If the source is + wl_pointer.axis_source.finger, a wl_pointer.axis_stop event will be + sent when the user lifts the finger off the device. + + If the source is wl_pointer.axis_source.wheel, + wl_pointer.axis_source.wheel_tilt or + wl_pointer.axis_source.continuous, a wl_pointer.axis_stop event may + or may not be sent. Whether a compositor sends an axis_stop event + for these sources is hardware-specific and implementation-dependent; + clients must not rely on receiving an axis_stop event for these + scroll sources and should treat scroll sequences from these scroll + sources as unterminated by default. + + This event is optional. If the source is unknown for a particular + axis event sequence, no event is sent. + Only one wl_pointer.axis_source event is permitted per frame. + + The order of wl_pointer.axis_discrete and wl_pointer.axis_source is + not guaranteed. + + + + + + + Stop notification for scroll and other axes. + + For some wl_pointer.axis_source types, a wl_pointer.axis_stop event + is sent to notify a client that the axis sequence has terminated. + This enables the client to implement kinetic scrolling. + See the wl_pointer.axis_source documentation for information on when + this event may be generated. + + Any wl_pointer.axis events with the same axis_source after this + event should be considered as the start of a new axis motion. + + The timestamp is to be interpreted identical to the timestamp in the + wl_pointer.axis event. The timestamp value may be the same as a + preceding wl_pointer.axis event. + + + + + + + + Discrete step information for scroll and other axes. + + This event carries the axis value of the wl_pointer.axis event in + discrete steps (e.g. mouse wheel clicks). + + This event is deprecated with wl_pointer version 8 - this event is not + sent to clients supporting version 8 or later. + + This event does not occur on its own, it is coupled with a + wl_pointer.axis event that represents this axis value on a + continuous scale. The protocol guarantees that each axis_discrete + event is always followed by exactly one axis event with the same + axis number within the same wl_pointer.frame. Note that the protocol + allows for other events to occur between the axis_discrete and + its coupled axis event, including other axis_discrete or axis + events. A wl_pointer.frame must not contain more than one axis_discrete + event per axis type. + + This event is optional; continuous scrolling devices + like two-finger scrolling on touchpads do not have discrete + steps and do not generate this event. + + The discrete value carries the directional information. e.g. a value + of -2 is two steps towards the negative direction of this axis. + + The axis number is identical to the axis number in the associated + axis event. + + The order of wl_pointer.axis_discrete and wl_pointer.axis_source is + not guaranteed. + + + + + + + + Discrete high-resolution scroll information. + + This event carries high-resolution wheel scroll information, + with each multiple of 120 representing one logical scroll step + (a wheel detent). For example, an axis_value120 of 30 is one quarter of + a logical scroll step in the positive direction, a value120 of + -240 are two logical scroll steps in the negative direction within the + same hardware event. + Clients that rely on discrete scrolling should accumulate the + value120 to multiples of 120 before processing the event. + + The value120 must not be zero. + + This event replaces the wl_pointer.axis_discrete event in clients + supporting wl_pointer version 8 or later. + + Where a wl_pointer.axis_source event occurs in the same + wl_pointer.frame, the axis source applies to this event. + + The order of wl_pointer.axis_value120 and wl_pointer.axis_source is + not guaranteed. + + + + + + + + + + This specifies the direction of the physical motion that caused a + wl_pointer.axis event, relative to the wl_pointer.axis direction. + + + + + + + + Relative directional information of the entity causing the axis + motion. + + For a wl_pointer.axis event, the wl_pointer.axis_relative_direction + event specifies the movement direction of the entity causing the + wl_pointer.axis event. For example: + - if a user's fingers on a touchpad move down and this + causes a wl_pointer.axis vertical_scroll down event, the physical + direction is 'identical' + - if a user's fingers on a touchpad move down and this causes a + wl_pointer.axis vertical_scroll up scroll up event ('natural + scrolling'), the physical direction is 'inverted'. + + A client may use this information to adjust scroll motion of + components. Specifically, enabling natural scrolling causes the + content to change direction compared to traditional scrolling. + Some widgets like volume control sliders should usually match the + physical direction regardless of whether natural scrolling is + active. This event enables clients to match the scroll direction of + a widget to the physical direction. + + This event does not occur on its own, it is coupled with a + wl_pointer.axis event that represents this axis value. + The protocol guarantees that each axis_relative_direction event is + always followed by exactly one axis event with the same + axis number within the same wl_pointer.frame. Note that the protocol + allows for other events to occur between the axis_relative_direction + and its coupled axis event. + + The axis number is identical to the axis number in the associated + axis event. + + The order of wl_pointer.axis_relative_direction, + wl_pointer.axis_discrete and wl_pointer.axis_source is not + guaranteed. + + + + + + + + + The wl_keyboard interface represents one or more keyboards + associated with a seat. + + + + + This specifies the format of the keymap provided to the + client with the wl_keyboard.keymap event. + + + + + + + + This event provides a file descriptor to the client which can be + memory-mapped in read-only mode to provide a keyboard mapping + description. + + From version 7 onwards, the fd must be mapped with MAP_PRIVATE by + the recipient, as MAP_SHARED may fail. + + + + + + + + + Notification that this seat's keyboard focus is on a certain + surface. + + The compositor must send the wl_keyboard.modifiers event after this + event. + + + + + + + + + Notification that this seat's keyboard focus is no longer on + a certain surface. + + The leave notification is sent before the enter notification + for the new focus. + + After this event client must assume that all keys, including modifiers, + are lifted and also it must stop key repeating if there's some going on. + + + + + + + + Describes the physical state of a key that produced the key event. + + + + + + + + A key was pressed or released. + The time argument is a timestamp with millisecond + granularity, with an undefined base. + + The key is a platform-specific key code that can be interpreted + by feeding it to the keyboard mapping (see the keymap event). + + If this event produces a change in modifiers, then the resulting + wl_keyboard.modifiers event must be sent after this event. + + + + + + + + + + Notifies clients that the modifier and/or group state has + changed, and it should update its local state. + + + + + + + + + + + + + + + + + + + Informs the client about the keyboard's repeat rate and delay. + + This event is sent as soon as the wl_keyboard object has been created, + and is guaranteed to be received by the client before any key press + event. + + Negative values for either rate or delay are illegal. A rate of zero + will disable any repeating (regardless of the value of delay). + + This event can be sent later on as well with a new value if necessary, + so clients should continue listening for the event past the creation + of wl_keyboard. + + + + + + + + + The wl_touch interface represents a touchscreen + associated with a seat. + + Touch interactions can consist of one or more contacts. + For each contact, a series of events is generated, starting + with a down event, followed by zero or more motion events, + and ending with an up event. Events relating to the same + contact point can be identified by the ID of the sequence. + + + + + A new touch point has appeared on the surface. This touch point is + assigned a unique ID. Future events from this touch point reference + this ID. The ID ceases to be valid after a touch up event and may be + reused in the future. + + + + + + + + + + + + The touch point has disappeared. No further events will be sent for + this touch point and the touch point's ID is released and may be + reused in a future touch down event. + + + + + + + + + A touch point has changed coordinates. + + + + + + + + + + Indicates the end of a set of events that logically belong together. + A client is expected to accumulate the data in all events within the + frame before proceeding. + + A wl_touch.frame terminates at least one event but otherwise no + guarantee is provided about the set of events within a frame. A client + must assume that any state not updated in a frame is unchanged from the + previously known state. + + + + + + Sent if the compositor decides the touch stream is a global + gesture. No further events are sent to the clients from that + particular gesture. Touch cancellation applies to all touch points + currently active on this client's surface. The client is + responsible for finalizing the touch points, future touch points on + this surface may reuse the touch point ID. + + + + + + + + + + + + + + Sent when a touchpoint has changed its shape. + + This event does not occur on its own. It is sent before a + wl_touch.frame event and carries the new shape information for + any previously reported, or new touch points of that frame. + + Other events describing the touch point such as wl_touch.down, + wl_touch.motion or wl_touch.orientation may be sent within the + same wl_touch.frame. A client should treat these events as a single + logical touch point update. The order of wl_touch.shape, + wl_touch.orientation and wl_touch.motion is not guaranteed. + A wl_touch.down event is guaranteed to occur before the first + wl_touch.shape event for this touch ID but both events may occur within + the same wl_touch.frame. + + A touchpoint shape is approximated by an ellipse through the major and + minor axis length. The major axis length describes the longer diameter + of the ellipse, while the minor axis length describes the shorter + diameter. Major and minor are orthogonal and both are specified in + surface-local coordinates. The center of the ellipse is always at the + touchpoint location as reported by wl_touch.down or wl_touch.move. + + This event is only sent by the compositor if the touch device supports + shape reports. The client has to make reasonable assumptions about the + shape if it did not receive this event. + + + + + + + + + Sent when a touchpoint has changed its orientation. + + This event does not occur on its own. It is sent before a + wl_touch.frame event and carries the new shape information for + any previously reported, or new touch points of that frame. + + Other events describing the touch point such as wl_touch.down, + wl_touch.motion or wl_touch.shape may be sent within the + same wl_touch.frame. A client should treat these events as a single + logical touch point update. The order of wl_touch.shape, + wl_touch.orientation and wl_touch.motion is not guaranteed. + A wl_touch.down event is guaranteed to occur before the first + wl_touch.orientation event for this touch ID but both events may occur + within the same wl_touch.frame. + + The orientation describes the clockwise angle of a touchpoint's major + axis to the positive surface y-axis and is normalized to the -180 to + +180 degree range. The granularity of orientation depends on the touch + device, some devices only support binary rotation values between 0 and + 90 degrees. + + This event is only sent by the compositor if the touch device supports + orientation reports. + + + + + + + + + An output describes part of the compositor geometry. The + compositor works in the 'compositor coordinate system' and an + output corresponds to a rectangular area in that space that is + actually visible. This typically corresponds to a monitor that + displays part of the compositor space. This object is published + as global during start up, or when a monitor is hotplugged. + + + + + This enumeration describes how the physical + pixels on an output are laid out. + + + + + + + + + + + + This describes the transform that a compositor will apply to a + surface to compensate for the rotation or mirroring of an + output device. + + The flipped values correspond to an initial flip around a + vertical axis followed by rotation. + + The purpose is mainly to allow clients to render accordingly and + tell the compositor, so that for fullscreen surfaces, the + compositor will still be able to scan out directly from client + surfaces. + + + + + + + + + + + + + + The geometry event describes geometric properties of the output. + The event is sent when binding to the output object and whenever + any of the properties change. + + The physical size can be set to zero if it doesn't make sense for this + output (e.g. for projectors or virtual outputs). + + The geometry event will be followed by a done event (starting from + version 2). + + Note: wl_output only advertises partial information about the output + position and identification. Some compositors, for instance those not + implementing a desktop-style output layout or those exposing virtual + outputs, might fake this information. Instead of using x and y, clients + should use xdg_output.logical_position. Instead of using make and model, + clients should use name and description. + + + + + + + + + + + + + + These flags describe properties of an output mode. + They are used in the flags bitfield of the mode event. + + + + + + + + The mode event describes an available mode for the output. + + The event is sent when binding to the output object and there + will always be one mode, the current mode. The event is sent + again if an output changes mode, for the mode that is now + current. In other words, the current mode is always the last + mode that was received with the current flag set. + + Non-current modes are deprecated. A compositor can decide to only + advertise the current mode and never send other modes. Clients + should not rely on non-current modes. + + The size of a mode is given in physical hardware units of + the output device. This is not necessarily the same as + the output size in the global compositor space. For instance, + the output may be scaled, as described in wl_output.scale, + or transformed, as described in wl_output.transform. Clients + willing to retrieve the output size in the global compositor + space should use xdg_output.logical_size instead. + + The vertical refresh rate can be set to zero if it doesn't make + sense for this output (e.g. for virtual outputs). + + The mode event will be followed by a done event (starting from + version 2). + + Clients should not use the refresh rate to schedule frames. Instead, + they should use the wl_surface.frame event or the presentation-time + protocol. + + Note: this information is not always meaningful for all outputs. Some + compositors, such as those exposing virtual outputs, might fake the + refresh rate or the size. + + + + + + + + + + + + This event is sent after all other properties have been + sent after binding to the output object and after any + other property changes done after that. This allows + changes to the output properties to be seen as + atomic, even if they happen via multiple events. + + + + + + This event contains scaling geometry information + that is not in the geometry event. It may be sent after + binding the output object or if the output scale changes + later. If it is not sent, the client should assume a + scale of 1. + + A scale larger than 1 means that the compositor will + automatically scale surface buffers by this amount + when rendering. This is used for very high resolution + displays where applications rendering at the native + resolution would be too small to be legible. + + It is intended that scaling aware clients track the + current output of a surface, and if it is on a scaled + output it should use wl_surface.set_buffer_scale with + the scale of the output. That way the compositor can + avoid scaling the surface, and the client can supply + a higher detail image. + + The scale event will be followed by a done event. + + + + + + + + + Using this request a client can tell the server that it is not going to + use the output object anymore. + + + + + + + + Many compositors will assign user-friendly names to their outputs, show + them to the user, allow the user to refer to an output, etc. The client + may wish to know this name as well to offer the user similar behaviors. + + The name is a UTF-8 string with no convention defined for its contents. + Each name is unique among all wl_output globals. The name is only + guaranteed to be unique for the compositor instance. + + The same output name is used for all clients for a given wl_output + global. Thus, the name can be shared across processes to refer to a + specific wl_output global. + + The name is not guaranteed to be persistent across sessions, thus cannot + be used to reliably identify an output in e.g. configuration files. + + Examples of names include 'HDMI-A-1', 'WL-1', 'X11-1', etc. However, do + not assume that the name is a reflection of an underlying DRM connector, + X11 connection, etc. + + The name event is sent after binding the output object. This event is + only sent once per output object, and the name does not change over the + lifetime of the wl_output global. + + Compositors may re-use the same output name if the wl_output global is + destroyed and re-created later. Compositors should avoid re-using the + same name if possible. + + The name event will be followed by a done event. + + + + + + + Many compositors can produce human-readable descriptions of their + outputs. The client may wish to know this description as well, e.g. for + output selection purposes. + + The description is a UTF-8 string with no convention defined for its + contents. The description is not guaranteed to be unique among all + wl_output globals. Examples might include 'Foocorp 11" Display' or + 'Virtual X11 output via :1'. + + The description event is sent after binding the output object and + whenever the description changes. The description is optional, and may + not be sent at all. + + The description event will be followed by a done event. + + + + + + + + A region object describes an area. + + Region objects are used to describe the opaque and input + regions of a surface. + + + + + Destroy the region. This will invalidate the object ID. + + + + + + Add the specified rectangle to the region. + + + + + + + + + + Subtract the specified rectangle from the region. + + + + + + + + + + + The global interface exposing sub-surface compositing capabilities. + A wl_surface, that has sub-surfaces associated, is called the + parent surface. Sub-surfaces can be arbitrarily nested and create + a tree of sub-surfaces. + + The root surface in a tree of sub-surfaces is the main + surface. The main surface cannot be a sub-surface, because + sub-surfaces must always have a parent. + + A main surface with its sub-surfaces forms a (compound) window. + For window management purposes, this set of wl_surface objects is + to be considered as a single window, and it should also behave as + such. + + The aim of sub-surfaces is to offload some of the compositing work + within a window from clients to the compositor. A prime example is + a video player with decorations and video in separate wl_surface + objects. This should allow the compositor to pass YUV video buffer + processing to dedicated overlay hardware when possible. + + + + + Informs the server that the client will not be using this + protocol object anymore. This does not affect any other + objects, wl_subsurface objects included. + + + + + + + + + + + Create a sub-surface interface for the given surface, and + associate it with the given parent surface. This turns a + plain wl_surface into a sub-surface. + + The to-be sub-surface must not already have another role, and it + must not have an existing wl_subsurface object. Otherwise the + bad_surface protocol error is raised. + + Adding sub-surfaces to a parent is a double-buffered operation on the + parent (see wl_surface.commit). The effect of adding a sub-surface + becomes visible on the next time the state of the parent surface is + applied. + + The parent surface must not be one of the child surface's descendants, + and the parent must be different from the child surface, otherwise the + bad_parent protocol error is raised. + + This request modifies the behaviour of wl_surface.commit request on + the sub-surface, see the documentation on wl_subsurface interface. + + + + + + + + + + An additional interface to a wl_surface object, which has been + made a sub-surface. A sub-surface has one parent surface. A + sub-surface's size and position are not limited to that of the parent. + Particularly, a sub-surface is not automatically clipped to its + parent's area. + + A sub-surface becomes mapped, when a non-NULL wl_buffer is applied + and the parent surface is mapped. The order of which one happens + first is irrelevant. A sub-surface is hidden if the parent becomes + hidden, or if a NULL wl_buffer is applied. These rules apply + recursively through the tree of surfaces. + + The behaviour of a wl_surface.commit request on a sub-surface + depends on the sub-surface's mode. The possible modes are + synchronized and desynchronized, see methods + wl_subsurface.set_sync and wl_subsurface.set_desync. Synchronized + mode caches the wl_surface state to be applied when the parent's + state gets applied, and desynchronized mode applies the pending + wl_surface state directly. A sub-surface is initially in the + synchronized mode. + + Sub-surfaces also have another kind of state, which is managed by + wl_subsurface requests, as opposed to wl_surface requests. This + state includes the sub-surface position relative to the parent + surface (wl_subsurface.set_position), and the stacking order of + the parent and its sub-surfaces (wl_subsurface.place_above and + .place_below). This state is applied when the parent surface's + wl_surface state is applied, regardless of the sub-surface's mode. + As the exception, set_sync and set_desync are effective immediately. + + The main surface can be thought to be always in desynchronized mode, + since it does not have a parent in the sub-surfaces sense. + + Even if a sub-surface is in desynchronized mode, it will behave as + in synchronized mode, if its parent surface behaves as in + synchronized mode. This rule is applied recursively throughout the + tree of surfaces. This means, that one can set a sub-surface into + synchronized mode, and then assume that all its child and grand-child + sub-surfaces are synchronized, too, without explicitly setting them. + + Destroying a sub-surface takes effect immediately. If you need to + synchronize the removal of a sub-surface to the parent surface update, + unmap the sub-surface first by attaching a NULL wl_buffer, update parent, + and then destroy the sub-surface. + + If the parent wl_surface object is destroyed, the sub-surface is + unmapped. + + + + + The sub-surface interface is removed from the wl_surface object + that was turned into a sub-surface with a + wl_subcompositor.get_subsurface request. The wl_surface's association + to the parent is deleted. The wl_surface is unmapped immediately. + + + + + + + + + + This schedules a sub-surface position change. + The sub-surface will be moved so that its origin (top left + corner pixel) will be at the location x, y of the parent surface + coordinate system. The coordinates are not restricted to the parent + surface area. Negative values are allowed. + + The scheduled coordinates will take effect whenever the state of the + parent surface is applied. When this happens depends on whether the + parent surface is in synchronized mode or not. See + wl_subsurface.set_sync and wl_subsurface.set_desync for details. + + If more than one set_position request is invoked by the client before + the commit of the parent surface, the position of a new request always + replaces the scheduled position from any previous request. + + The initial position is 0, 0. + + + + + + + + This sub-surface is taken from the stack, and put back just + above the reference surface, changing the z-order of the sub-surfaces. + The reference surface must be one of the sibling surfaces, or the + parent surface. Using any other surface, including this sub-surface, + will cause a protocol error. + + The z-order is double-buffered. Requests are handled in order and + applied immediately to a pending state. The final pending state is + copied to the active state the next time the state of the parent + surface is applied. When this happens depends on whether the parent + surface is in synchronized mode or not. See wl_subsurface.set_sync and + wl_subsurface.set_desync for details. + + A new sub-surface is initially added as the top-most in the stack + of its siblings and parent. + + + + + + + The sub-surface is placed just below the reference surface. + See wl_subsurface.place_above. + + + + + + + Change the commit behaviour of the sub-surface to synchronized + mode, also described as the parent dependent mode. + + In synchronized mode, wl_surface.commit on a sub-surface will + accumulate the committed state in a cache, but the state will + not be applied and hence will not change the compositor output. + The cached state is applied to the sub-surface immediately after + the parent surface's state is applied. This ensures atomic + updates of the parent and all its synchronized sub-surfaces. + Applying the cached state will invalidate the cache, so further + parent surface commits do not (re-)apply old state. + + See wl_subsurface for the recursive effect of this mode. + + + + + + Change the commit behaviour of the sub-surface to desynchronized + mode, also described as independent or freely running mode. + + In desynchronized mode, wl_surface.commit on a sub-surface will + apply the pending state directly, without caching, as happens + normally with a wl_surface. Calling wl_surface.commit on the + parent surface has no effect on the sub-surface's wl_surface + state. This mode allows a sub-surface to be updated on its own. + + If cached state exists when wl_surface.commit is called in + desynchronized mode, the pending state is added to the cached + state, and applied as a whole. This invalidates the cache. + + Note: even if a sub-surface is set to desynchronized, a parent + sub-surface may override it to behave as synchronized. For details, + see wl_subsurface. + + If a surface's parent surface behaves as desynchronized, then + the cached state is applied on set_desync. + + + + + diff --git a/deps/wayland/xdg-decoration-unstable-v1.xml b/deps/wayland/xdg-decoration-unstable-v1.xml new file mode 100644 index 00000000..e5967751 --- /dev/null +++ b/deps/wayland/xdg-decoration-unstable-v1.xml @@ -0,0 +1,156 @@ + + + + Copyright © 2018 Simon Ser + + Permission is hereby granted, free of charge, to any person obtaining a + copy of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice (including the next + paragraph) shall be included in all copies or substantial portions of the + Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + + + + + This interface allows a compositor to announce support for server-side + decorations. + + A window decoration is a set of window controls as deemed appropriate by + the party managing them, such as user interface components used to move, + resize and change a window's state. + + A client can use this protocol to request being decorated by a supporting + compositor. + + If compositor and client do not negotiate the use of a server-side + decoration using this protocol, clients continue to self-decorate as they + see fit. + + Warning! The protocol described in this file is experimental and + backward incompatible changes may be made. Backward compatible changes + may be added together with the corresponding interface version bump. + Backward incompatible changes are done by bumping the version number in + the protocol and interface names and resetting the interface version. + Once the protocol is to be declared stable, the 'z' prefix and the + version number in the protocol and interface names are removed and the + interface version number is reset. + + + + + Destroy the decoration manager. This doesn't destroy objects created + with the manager. + + + + + + Create a new decoration object associated with the given toplevel. + + Creating an xdg_toplevel_decoration from an xdg_toplevel which has a + buffer attached or committed is a client error, and any attempts by a + client to attach or manipulate a buffer prior to the first + xdg_toplevel_decoration.configure event must also be treated as + errors. + + + + + + + + + The decoration object allows the compositor to toggle server-side window + decorations for a toplevel surface. The client can request to switch to + another mode. + + The xdg_toplevel_decoration object must be destroyed before its + xdg_toplevel. + + + + + + + + + + + Switch back to a mode without any server-side decorations at the next + commit. + + + + + + These values describe window decoration modes. + + + + + + + + Set the toplevel surface decoration mode. This informs the compositor + that the client prefers the provided decoration mode. + + After requesting a decoration mode, the compositor will respond by + emitting an xdg_surface.configure event. The client should then update + its content, drawing it without decorations if the received mode is + server-side decorations. The client must also acknowledge the configure + when committing the new content (see xdg_surface.ack_configure). + + The compositor can decide not to use the client's mode and enforce a + different mode instead. + + Clients whose decoration mode depend on the xdg_toplevel state may send + a set_mode request in response to an xdg_surface.configure event and wait + for the next xdg_surface.configure event to prevent unwanted state. + Such clients are responsible for preventing configure loops and must + make sure not to send multiple successive set_mode requests with the + same decoration mode. + + + + + + + Unset the toplevel surface decoration mode. This informs the compositor + that the client doesn't prefer a particular decoration mode. + + This request has the same semantics as set_mode. + + + + + + The configure event asks the client to change its decoration mode. The + configured state should not be applied immediately. Clients must send an + ack_configure in response to this event. See xdg_surface.configure and + xdg_surface.ack_configure for details. + + A configure event can be sent at any time. The specified mode must be + obeyed by the client. + + + + + diff --git a/deps/wayland/xdg-shell.xml b/deps/wayland/xdg-shell.xml new file mode 100644 index 00000000..777eaa74 --- /dev/null +++ b/deps/wayland/xdg-shell.xml @@ -0,0 +1,1370 @@ + + + + + Copyright © 2008-2013 Kristian Høgsberg + Copyright © 2013 Rafael Antognolli + Copyright © 2013 Jasper St. Pierre + Copyright © 2010-2013 Intel Corporation + Copyright © 2015-2017 Samsung Electronics Co., Ltd + Copyright © 2015-2017 Red Hat Inc. + + Permission is hereby granted, free of charge, to any person obtaining a + copy of this software and associated documentation files (the "Software"), + to deal in the Software without restriction, including without limitation + the rights to use, copy, modify, merge, publish, distribute, sublicense, + and/or sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice (including the next + paragraph) shall be included in all copies or substantial portions of the + Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + + + + + The xdg_wm_base interface is exposed as a global object enabling clients + to turn their wl_surfaces into windows in a desktop environment. It + defines the basic functionality needed for clients and the compositor to + create windows that can be dragged, resized, maximized, etc, as well as + creating transient windows such as popup menus. + + + + + + + + + + + + + + + Destroy this xdg_wm_base object. + + Destroying a bound xdg_wm_base object while there are surfaces + still alive created by this xdg_wm_base object instance is illegal + and will result in a defunct_surfaces error. + + + + + + Create a positioner object. A positioner object is used to position + surfaces relative to some parent surface. See the interface description + and xdg_surface.get_popup for details. + + + + + + + This creates an xdg_surface for the given surface. While xdg_surface + itself is not a role, the corresponding surface may only be assigned + a role extending xdg_surface, such as xdg_toplevel or xdg_popup. It is + illegal to create an xdg_surface for a wl_surface which already has an + assigned role and this will result in a role error. + + This creates an xdg_surface for the given surface. An xdg_surface is + used as basis to define a role to a given surface, such as xdg_toplevel + or xdg_popup. It also manages functionality shared between xdg_surface + based surface roles. + + See the documentation of xdg_surface for more details about what an + xdg_surface is and how it is used. + + + + + + + + A client must respond to a ping event with a pong request or + the client may be deemed unresponsive. See xdg_wm_base.ping + and xdg_wm_base.error.unresponsive. + + + + + + + The ping event asks the client if it's still alive. Pass the + serial specified in the event back to the compositor by sending + a "pong" request back with the specified serial. See xdg_wm_base.pong. + + Compositors can use this to determine if the client is still + alive. It's unspecified what will happen if the client doesn't + respond to the ping request, or in what timeframe. Clients should + try to respond in a reasonable amount of time. The “unresponsive” + error is provided for compositors that wish to disconnect unresponsive + clients. + + A compositor is free to ping in any way it wants, but a client must + always respond to any xdg_wm_base object it created. + + + + + + + + The xdg_positioner provides a collection of rules for the placement of a + child surface relative to a parent surface. Rules can be defined to ensure + the child surface remains within the visible area's borders, and to + specify how the child surface changes its position, such as sliding along + an axis, or flipping around a rectangle. These positioner-created rules are + constrained by the requirement that a child surface must intersect with or + be at least partially adjacent to its parent surface. + + See the various requests for details about possible rules. + + At the time of the request, the compositor makes a copy of the rules + specified by the xdg_positioner. Thus, after the request is complete the + xdg_positioner object can be destroyed or reused; further changes to the + object will have no effect on previous usages. + + For an xdg_positioner object to be considered complete, it must have a + non-zero size set by set_size, and a non-zero anchor rectangle set by + set_anchor_rect. Passing an incomplete xdg_positioner object when + positioning a surface raises an invalid_positioner error. + + + + + + + + + Notify the compositor that the xdg_positioner will no longer be used. + + + + + + Set the size of the surface that is to be positioned with the positioner + object. The size is in surface-local coordinates and corresponds to the + window geometry. See xdg_surface.set_window_geometry. + + If a zero or negative size is set the invalid_input error is raised. + + + + + + + + Specify the anchor rectangle within the parent surface that the child + surface will be placed relative to. The rectangle is relative to the + window geometry as defined by xdg_surface.set_window_geometry of the + parent surface. + + When the xdg_positioner object is used to position a child surface, the + anchor rectangle may not extend outside the window geometry of the + positioned child's parent surface. + + If a negative size is set the invalid_input error is raised. + + + + + + + + + + + + + + + + + + + + + + Defines the anchor point for the anchor rectangle. The specified anchor + is used derive an anchor point that the child surface will be + positioned relative to. If a corner anchor is set (e.g. 'top_left' or + 'bottom_right'), the anchor point will be at the specified corner; + otherwise, the derived anchor point will be centered on the specified + edge, or in the center of the anchor rectangle if no edge is specified. + + + + + + + + + + + + + + + + + + + Defines in what direction a surface should be positioned, relative to + the anchor point of the parent surface. If a corner gravity is + specified (e.g. 'bottom_right' or 'top_left'), then the child surface + will be placed towards the specified gravity; otherwise, the child + surface will be centered over the anchor point on any axis that had no + gravity specified. If the gravity is not in the ‘gravity’ enum, an + invalid_input error is raised. + + + + + + + The constraint adjustment value define ways the compositor will adjust + the position of the surface, if the unadjusted position would result + in the surface being partly constrained. + + Whether a surface is considered 'constrained' is left to the compositor + to determine. For example, the surface may be partly outside the + compositor's defined 'work area', thus necessitating the child surface's + position be adjusted until it is entirely inside the work area. + + The adjustments can be combined, according to a defined precedence: 1) + Flip, 2) Slide, 3) Resize. + + + + Don't alter the surface position even if it is constrained on some + axis, for example partially outside the edge of an output. + + + + + Slide the surface along the x axis until it is no longer constrained. + + First try to slide towards the direction of the gravity on the x axis + until either the edge in the opposite direction of the gravity is + unconstrained or the edge in the direction of the gravity is + constrained. + + Then try to slide towards the opposite direction of the gravity on the + x axis until either the edge in the direction of the gravity is + unconstrained or the edge in the opposite direction of the gravity is + constrained. + + + + + Slide the surface along the y axis until it is no longer constrained. + + First try to slide towards the direction of the gravity on the y axis + until either the edge in the opposite direction of the gravity is + unconstrained or the edge in the direction of the gravity is + constrained. + + Then try to slide towards the opposite direction of the gravity on the + y axis until either the edge in the direction of the gravity is + unconstrained or the edge in the opposite direction of the gravity is + constrained. + + + + + Invert the anchor and gravity on the x axis if the surface is + constrained on the x axis. For example, if the left edge of the + surface is constrained, the gravity is 'left' and the anchor is + 'left', change the gravity to 'right' and the anchor to 'right'. + + If the adjusted position also ends up being constrained, the resulting + position of the flip_x adjustment will be the one before the + adjustment. + + + + + Invert the anchor and gravity on the y axis if the surface is + constrained on the y axis. For example, if the bottom edge of the + surface is constrained, the gravity is 'bottom' and the anchor is + 'bottom', change the gravity to 'top' and the anchor to 'top'. + + The adjusted position is calculated given the original anchor + rectangle and offset, but with the new flipped anchor and gravity + values. + + If the adjusted position also ends up being constrained, the resulting + position of the flip_y adjustment will be the one before the + adjustment. + + + + + Resize the surface horizontally so that it is completely + unconstrained. + + + + + Resize the surface vertically so that it is completely unconstrained. + + + + + + + Specify how the window should be positioned if the originally intended + position caused the surface to be constrained, meaning at least + partially outside positioning boundaries set by the compositor. The + adjustment is set by constructing a bitmask describing the adjustment to + be made when the surface is constrained on that axis. + + If no bit for one axis is set, the compositor will assume that the child + surface should not change its position on that axis when constrained. + + If more than one bit for one axis is set, the order of how adjustments + are applied is specified in the corresponding adjustment descriptions. + + The default adjustment is none. + + + + + + + Specify the surface position offset relative to the position of the + anchor on the anchor rectangle and the anchor on the surface. For + example if the anchor of the anchor rectangle is at (x, y), the surface + has the gravity bottom|right, and the offset is (ox, oy), the calculated + surface position will be (x + ox, y + oy). The offset position of the + surface is the one used for constraint testing. See + set_constraint_adjustment. + + An example use case is placing a popup menu on top of a user interface + element, while aligning the user interface element of the parent surface + with some user interface element placed somewhere in the popup surface. + + + + + + + + + + When set reactive, the surface is reconstrained if the conditions used + for constraining changed, e.g. the parent window moved. + + If the conditions changed and the popup was reconstrained, an + xdg_popup.configure event is sent with updated geometry, followed by an + xdg_surface.configure event. + + + + + + Set the parent window geometry the compositor should use when + positioning the popup. The compositor may use this information to + determine the future state the popup should be constrained using. If + this doesn't match the dimension of the parent the popup is eventually + positioned against, the behavior is undefined. + + The arguments are given in the surface-local coordinate space. + + + + + + + + Set the serial of an xdg_surface.configure event this positioner will be + used in response to. The compositor may use this information together + with set_parent_size to determine what future state the popup should be + constrained using. + + + + + + + + An interface that may be implemented by a wl_surface, for + implementations that provide a desktop-style user interface. + + It provides a base set of functionality required to construct user + interface elements requiring management by the compositor, such as + toplevel windows, menus, etc. The types of functionality are split into + xdg_surface roles. + + Creating an xdg_surface does not set the role for a wl_surface. In order + to map an xdg_surface, the client must create a role-specific object + using, e.g., get_toplevel, get_popup. The wl_surface for any given + xdg_surface can have at most one role, and may not be assigned any role + not based on xdg_surface. + + A role must be assigned before any other requests are made to the + xdg_surface object. + + The client must call wl_surface.commit on the corresponding wl_surface + for the xdg_surface state to take effect. + + Creating an xdg_surface from a wl_surface which has a buffer attached or + committed is a client error, and any attempts by a client to attach or + manipulate a buffer prior to the first xdg_surface.configure call must + also be treated as errors. + + After creating a role-specific object and setting it up, the client must + perform an initial commit without any buffer attached. The compositor + will reply with initial wl_surface state such as + wl_surface.preferred_buffer_scale followed by an xdg_surface.configure + event. The client must acknowledge it and is then allowed to attach a + buffer to map the surface. + + Mapping an xdg_surface-based role surface is defined as making it + possible for the surface to be shown by the compositor. Note that + a mapped surface is not guaranteed to be visible once it is mapped. + + For an xdg_surface to be mapped by the compositor, the following + conditions must be met: + (1) the client has assigned an xdg_surface-based role to the surface + (2) the client has set and committed the xdg_surface state and the + role-dependent state to the surface + (3) the client has committed a buffer to the surface + + A newly-unmapped surface is considered to have met condition (1) out + of the 3 required conditions for mapping a surface if its role surface + has not been destroyed, i.e. the client must perform the initial commit + again before attaching a buffer. + + + + + + + + + + + + + + Destroy the xdg_surface object. An xdg_surface must only be destroyed + after its role object has been destroyed, otherwise + a defunct_role_object error is raised. + + + + + + This creates an xdg_toplevel object for the given xdg_surface and gives + the associated wl_surface the xdg_toplevel role. + + See the documentation of xdg_toplevel for more details about what an + xdg_toplevel is and how it is used. + + + + + + + This creates an xdg_popup object for the given xdg_surface and gives + the associated wl_surface the xdg_popup role. + + If null is passed as a parent, a parent surface must be specified using + some other protocol, before committing the initial state. + + See the documentation of xdg_popup for more details about what an + xdg_popup is and how it is used. + + + + + + + + + The window geometry of a surface is its "visible bounds" from the + user's perspective. Client-side decorations often have invisible + portions like drop-shadows which should be ignored for the + purposes of aligning, placing and constraining windows. + + The window geometry is double buffered, and will be applied at the + time wl_surface.commit of the corresponding wl_surface is called. + + When maintaining a position, the compositor should treat the (x, y) + coordinate of the window geometry as the top left corner of the window. + A client changing the (x, y) window geometry coordinate should in + general not alter the position of the window. + + Once the window geometry of the surface is set, it is not possible to + unset it, and it will remain the same until set_window_geometry is + called again, even if a new subsurface or buffer is attached. + + If never set, the value is the full bounds of the surface, + including any subsurfaces. This updates dynamically on every + commit. This unset is meant for extremely simple clients. + + The arguments are given in the surface-local coordinate space of + the wl_surface associated with this xdg_surface, and may extend outside + of the wl_surface itself to mark parts of the subsurface tree as part of + the window geometry. + + When applied, the effective window geometry will be the set window + geometry clamped to the bounding rectangle of the combined + geometry of the surface of the xdg_surface and the associated + subsurfaces. + + The effective geometry will not be recalculated unless a new call to + set_window_geometry is done and the new pending surface state is + subsequently applied. + + The width and height of the effective window geometry must be + greater than zero. Setting an invalid size will raise an + invalid_size error. + + + + + + + + + + When a configure event is received, if a client commits the + surface in response to the configure event, then the client + must make an ack_configure request sometime before the commit + request, passing along the serial of the configure event. + + For instance, for toplevel surfaces the compositor might use this + information to move a surface to the top left only when the client has + drawn itself for the maximized or fullscreen state. + + If the client receives multiple configure events before it + can respond to one, it only has to ack the last configure event. + Acking a configure event that was never sent raises an invalid_serial + error. + + A client is not required to commit immediately after sending + an ack_configure request - it may even ack_configure several times + before its next surface commit. + + A client may send multiple ack_configure requests before committing, but + only the last request sent before a commit indicates which configure + event the client really is responding to. + + Sending an ack_configure request consumes the serial number sent with + the request, as well as serial numbers sent by all configure events + sent on this xdg_surface prior to the configure event referenced by + the committed serial. + + It is an error to issue multiple ack_configure requests referencing a + serial from the same configure event, or to issue an ack_configure + request referencing a serial from a configure event issued before the + event identified by the last ack_configure request for the same + xdg_surface. Doing so will raise an invalid_serial error. + + + + + + + The configure event marks the end of a configure sequence. A configure + sequence is a set of one or more events configuring the state of the + xdg_surface, including the final xdg_surface.configure event. + + Where applicable, xdg_surface surface roles will during a configure + sequence extend this event as a latched state sent as events before the + xdg_surface.configure event. Such events should be considered to make up + a set of atomically applied configuration states, where the + xdg_surface.configure commits the accumulated state. + + Clients should arrange their surface for the new states, and then send + an ack_configure request with the serial sent in this configure event at + some point before committing the new surface. + + If the client receives multiple configure events before it can respond + to one, it is free to discard all but the last event it received. + + + + + + + + + This interface defines an xdg_surface role which allows a surface to, + among other things, set window-like properties such as maximize, + fullscreen, and minimize, set application-specific metadata like title and + id, and well as trigger user interactive operations such as interactive + resize and move. + + Unmapping an xdg_toplevel means that the surface cannot be shown + by the compositor until it is explicitly mapped again. + All active operations (e.g., move, resize) are canceled and all + attributes (e.g. title, state, stacking, ...) are discarded for + an xdg_toplevel surface when it is unmapped. The xdg_toplevel returns to + the state it had right after xdg_surface.get_toplevel. The client + can re-map the toplevel by perfoming a commit without any buffer + attached, waiting for a configure event and handling it as usual (see + xdg_surface description). + + Attaching a null buffer to a toplevel unmaps the surface. + + + + + This request destroys the role surface and unmaps the surface; + see "Unmapping" behavior in interface section for details. + + + + + + + + + + + + Set the "parent" of this surface. This surface should be stacked + above the parent surface and all other ancestor surfaces. + + Parent surfaces should be set on dialogs, toolboxes, or other + "auxiliary" surfaces, so that the parent is raised when the dialog + is raised. + + Setting a null parent for a child surface unsets its parent. Setting + a null parent for a surface which currently has no parent is a no-op. + + Only mapped surfaces can have child surfaces. Setting a parent which + is not mapped is equivalent to setting a null parent. If a surface + becomes unmapped, its children's parent is set to the parent of + the now-unmapped surface. If the now-unmapped surface has no parent, + its children's parent is unset. If the now-unmapped surface becomes + mapped again, its parent-child relationship is not restored. + + The parent toplevel must not be one of the child toplevel's + descendants, and the parent must be different from the child toplevel, + otherwise the invalid_parent protocol error is raised. + + + + + + + Set a short title for the surface. + + This string may be used to identify the surface in a task bar, + window list, or other user interface elements provided by the + compositor. + + The string must be encoded in UTF-8. + + + + + + + Set an application identifier for the surface. + + The app ID identifies the general class of applications to which + the surface belongs. The compositor can use this to group multiple + surfaces together, or to determine how to launch a new application. + + For D-Bus activatable applications, the app ID is used as the D-Bus + service name. + + The compositor shell will try to group application surfaces together + by their app ID. As a best practice, it is suggested to select app + ID's that match the basename of the application's .desktop file. + For example, "org.freedesktop.FooViewer" where the .desktop file is + "org.freedesktop.FooViewer.desktop". + + Like other properties, a set_app_id request can be sent after the + xdg_toplevel has been mapped to update the property. + + See the desktop-entry specification [0] for more details on + application identifiers and how they relate to well-known D-Bus + names and .desktop files. + + [0] https://standards.freedesktop.org/desktop-entry-spec/ + + + + + + + Clients implementing client-side decorations might want to show + a context menu when right-clicking on the decorations, giving the + user a menu that they can use to maximize or minimize the window. + + This request asks the compositor to pop up such a window menu at + the given position, relative to the local surface coordinates of + the parent surface. There are no guarantees as to what menu items + the window menu contains, or even if a window menu will be drawn + at all. + + This request must be used in response to some sort of user action + like a button press, key press, or touch down event. + + + + + + + + + + Start an interactive, user-driven move of the surface. + + This request must be used in response to some sort of user action + like a button press, key press, or touch down event. The passed + serial is used to determine the type of interactive move (touch, + pointer, etc). + + The server may ignore move requests depending on the state of + the surface (e.g. fullscreen or maximized), or if the passed serial + is no longer valid. + + If triggered, the surface will lose the focus of the device + (wl_pointer, wl_touch, etc) used for the move. It is up to the + compositor to visually indicate that the move is taking place, such as + updating a pointer cursor, during the move. There is no guarantee + that the device focus will return when the move is completed. + + + + + + + + These values are used to indicate which edge of a surface + is being dragged in a resize operation. + + + + + + + + + + + + + + + Start a user-driven, interactive resize of the surface. + + This request must be used in response to some sort of user action + like a button press, key press, or touch down event. The passed + serial is used to determine the type of interactive resize (touch, + pointer, etc). + + The server may ignore resize requests depending on the state of + the surface (e.g. fullscreen or maximized). + + If triggered, the client will receive configure events with the + "resize" state enum value and the expected sizes. See the "resize" + enum value for more details about what is required. The client + must also acknowledge configure events using "ack_configure". After + the resize is completed, the client will receive another "configure" + event without the resize state. + + If triggered, the surface also will lose the focus of the device + (wl_pointer, wl_touch, etc) used for the resize. It is up to the + compositor to visually indicate that the resize is taking place, + such as updating a pointer cursor, during the resize. There is no + guarantee that the device focus will return when the resize is + completed. + + The edges parameter specifies how the surface should be resized, and + is one of the values of the resize_edge enum. Values not matching + a variant of the enum will cause the invalid_resize_edge protocol error. + The compositor may use this information to update the surface position + for example when dragging the top left corner. The compositor may also + use this information to adapt its behavior, e.g. choose an appropriate + cursor image. + + + + + + + + + The different state values used on the surface. This is designed for + state values like maximized, fullscreen. It is paired with the + configure event to ensure that both the client and the compositor + setting the state can be synchronized. + + States set in this way are double-buffered. They will get applied on + the next commit. + + + + The surface is maximized. The window geometry specified in the configure + event must be obeyed by the client, or the xdg_wm_base.invalid_surface_state + error is raised. + + The client should draw without shadow or other + decoration outside of the window geometry. + + + + + The surface is fullscreen. The window geometry specified in the + configure event is a maximum; the client cannot resize beyond it. For + a surface to cover the whole fullscreened area, the geometry + dimensions must be obeyed by the client. For more details, see + xdg_toplevel.set_fullscreen. + + + + + The surface is being resized. The window geometry specified in the + configure event is a maximum; the client cannot resize beyond it. + Clients that have aspect ratio or cell sizing configuration can use + a smaller size, however. + + + + + Client window decorations should be painted as if the window is + active. Do not assume this means that the window actually has + keyboard or pointer focus. + + + + + The window is currently in a tiled layout and the left edge is + considered to be adjacent to another part of the tiling grid. + + + + + The window is currently in a tiled layout and the right edge is + considered to be adjacent to another part of the tiling grid. + + + + + The window is currently in a tiled layout and the top edge is + considered to be adjacent to another part of the tiling grid. + + + + + The window is currently in a tiled layout and the bottom edge is + considered to be adjacent to another part of the tiling grid. + + + + + The surface is currently not ordinarily being repainted; for + example because its content is occluded by another window, or its + outputs are switched off due to screen locking. + + + + + + + Set a maximum size for the window. + + The client can specify a maximum size so that the compositor does + not try to configure the window beyond this size. + + The width and height arguments are in window geometry coordinates. + See xdg_surface.set_window_geometry. + + Values set in this way are double-buffered. They will get applied + on the next commit. + + The compositor can use this information to allow or disallow + different states like maximize or fullscreen and draw accurate + animations. + + Similarly, a tiling window manager may use this information to + place and resize client windows in a more effective way. + + The client should not rely on the compositor to obey the maximum + size. The compositor may decide to ignore the values set by the + client and request a larger size. + + If never set, or a value of zero in the request, means that the + client has no expected maximum size in the given dimension. + As a result, a client wishing to reset the maximum size + to an unspecified state can use zero for width and height in the + request. + + Requesting a maximum size to be smaller than the minimum size of + a surface is illegal and will result in an invalid_size error. + + The width and height must be greater than or equal to zero. Using + strictly negative values for width or height will result in a + invalid_size error. + + + + + + + + Set a minimum size for the window. + + The client can specify a minimum size so that the compositor does + not try to configure the window below this size. + + The width and height arguments are in window geometry coordinates. + See xdg_surface.set_window_geometry. + + Values set in this way are double-buffered. They will get applied + on the next commit. + + The compositor can use this information to allow or disallow + different states like maximize or fullscreen and draw accurate + animations. + + Similarly, a tiling window manager may use this information to + place and resize client windows in a more effective way. + + The client should not rely on the compositor to obey the minimum + size. The compositor may decide to ignore the values set by the + client and request a smaller size. + + If never set, or a value of zero in the request, means that the + client has no expected minimum size in the given dimension. + As a result, a client wishing to reset the minimum size + to an unspecified state can use zero for width and height in the + request. + + Requesting a minimum size to be larger than the maximum size of + a surface is illegal and will result in an invalid_size error. + + The width and height must be greater than or equal to zero. Using + strictly negative values for width and height will result in a + invalid_size error. + + + + + + + + Maximize the surface. + + After requesting that the surface should be maximized, the compositor + will respond by emitting a configure event. Whether this configure + actually sets the window maximized is subject to compositor policies. + The client must then update its content, drawing in the configured + state. The client must also acknowledge the configure when committing + the new content (see ack_configure). + + It is up to the compositor to decide how and where to maximize the + surface, for example which output and what region of the screen should + be used. + + If the surface was already maximized, the compositor will still emit + a configure event with the "maximized" state. + + If the surface is in a fullscreen state, this request has no direct + effect. It may alter the state the surface is returned to when + unmaximized unless overridden by the compositor. + + + + + + Unmaximize the surface. + + After requesting that the surface should be unmaximized, the compositor + will respond by emitting a configure event. Whether this actually + un-maximizes the window is subject to compositor policies. + If available and applicable, the compositor will include the window + geometry dimensions the window had prior to being maximized in the + configure event. The client must then update its content, drawing it in + the configured state. The client must also acknowledge the configure + when committing the new content (see ack_configure). + + It is up to the compositor to position the surface after it was + unmaximized; usually the position the surface had before maximizing, if + applicable. + + If the surface was already not maximized, the compositor will still + emit a configure event without the "maximized" state. + + If the surface is in a fullscreen state, this request has no direct + effect. It may alter the state the surface is returned to when + unmaximized unless overridden by the compositor. + + + + + + Make the surface fullscreen. + + After requesting that the surface should be fullscreened, the + compositor will respond by emitting a configure event. Whether the + client is actually put into a fullscreen state is subject to compositor + policies. The client must also acknowledge the configure when + committing the new content (see ack_configure). + + The output passed by the request indicates the client's preference as + to which display it should be set fullscreen on. If this value is NULL, + it's up to the compositor to choose which display will be used to map + this surface. + + If the surface doesn't cover the whole output, the compositor will + position the surface in the center of the output and compensate with + with border fill covering the rest of the output. The content of the + border fill is undefined, but should be assumed to be in some way that + attempts to blend into the surrounding area (e.g. solid black). + + If the fullscreened surface is not opaque, the compositor must make + sure that other screen content not part of the same surface tree (made + up of subsurfaces, popups or similarly coupled surfaces) are not + visible below the fullscreened surface. + + + + + + + Make the surface no longer fullscreen. + + After requesting that the surface should be unfullscreened, the + compositor will respond by emitting a configure event. + Whether this actually removes the fullscreen state of the client is + subject to compositor policies. + + Making a surface unfullscreen sets states for the surface based on the following: + * the state(s) it may have had before becoming fullscreen + * any state(s) decided by the compositor + * any state(s) requested by the client while the surface was fullscreen + + The compositor may include the previous window geometry dimensions in + the configure event, if applicable. + + The client must also acknowledge the configure when committing the new + content (see ack_configure). + + + + + + Request that the compositor minimize your surface. There is no + way to know if the surface is currently minimized, nor is there + any way to unset minimization on this surface. + + If you are looking to throttle redrawing when minimized, please + instead use the wl_surface.frame event for this, as this will + also work with live previews on windows in Alt-Tab, Expose or + similar compositor features. + + + + + + This configure event asks the client to resize its toplevel surface or + to change its state. The configured state should not be applied + immediately. See xdg_surface.configure for details. + + The width and height arguments specify a hint to the window + about how its surface should be resized in window geometry + coordinates. See set_window_geometry. + + If the width or height arguments are zero, it means the client + should decide its own window dimension. This may happen when the + compositor needs to configure the state of the surface but doesn't + have any information about any previous or expected dimension. + + The states listed in the event specify how the width/height + arguments should be interpreted, and possibly how it should be + drawn. + + Clients must send an ack_configure in response to this event. See + xdg_surface.configure and xdg_surface.ack_configure for details. + + + + + + + + + The close event is sent by the compositor when the user + wants the surface to be closed. This should be equivalent to + the user clicking the close button in client-side decorations, + if your application has any. + + This is only a request that the user intends to close the + window. The client may choose to ignore this request, or show + a dialog to ask the user to save their data, etc. + + + + + + + + The configure_bounds event may be sent prior to a xdg_toplevel.configure + event to communicate the bounds a window geometry size is recommended + to constrain to. + + The passed width and height are in surface coordinate space. If width + and height are 0, it means bounds is unknown and equivalent to as if no + configure_bounds event was ever sent for this surface. + + The bounds can for example correspond to the size of a monitor excluding + any panels or other shell components, so that a surface isn't created in + a way that it cannot fit. + + The bounds may change at any point, and in such a case, a new + xdg_toplevel.configure_bounds will be sent, followed by + xdg_toplevel.configure and xdg_surface.configure. + + + + + + + + + + + + + + + + + This event advertises the capabilities supported by the compositor. If + a capability isn't supported, clients should hide or disable the UI + elements that expose this functionality. For instance, if the + compositor doesn't advertise support for minimized toplevels, a button + triggering the set_minimized request should not be displayed. + + The compositor will ignore requests it doesn't support. For instance, + a compositor which doesn't advertise support for minimized will ignore + set_minimized requests. + + Compositors must send this event once before the first + xdg_surface.configure event. When the capabilities change, compositors + must send this event again and then send an xdg_surface.configure + event. + + The configured state should not be applied immediately. See + xdg_surface.configure for details. + + The capabilities are sent as an array of 32-bit unsigned integers in + native endianness. + + + + + + + + A popup surface is a short-lived, temporary surface. It can be used to + implement for example menus, popovers, tooltips and other similar user + interface concepts. + + A popup can be made to take an explicit grab. See xdg_popup.grab for + details. + + When the popup is dismissed, a popup_done event will be sent out, and at + the same time the surface will be unmapped. See the xdg_popup.popup_done + event for details. + + Explicitly destroying the xdg_popup object will also dismiss the popup and + unmap the surface. Clients that want to dismiss the popup when another + surface of their own is clicked should dismiss the popup using the destroy + request. + + A newly created xdg_popup will be stacked on top of all previously created + xdg_popup surfaces associated with the same xdg_toplevel. + + The parent of an xdg_popup must be mapped (see the xdg_surface + description) before the xdg_popup itself. + + The client must call wl_surface.commit on the corresponding wl_surface + for the xdg_popup state to take effect. + + + + + + + + + This destroys the popup. Explicitly destroying the xdg_popup + object will also dismiss the popup, and unmap the surface. + + If this xdg_popup is not the "topmost" popup, the + xdg_wm_base.not_the_topmost_popup protocol error will be sent. + + + + + + This request makes the created popup take an explicit grab. An explicit + grab will be dismissed when the user dismisses the popup, or when the + client destroys the xdg_popup. This can be done by the user clicking + outside the surface, using the keyboard, or even locking the screen + through closing the lid or a timeout. + + If the compositor denies the grab, the popup will be immediately + dismissed. + + This request must be used in response to some sort of user action like a + button press, key press, or touch down event. The serial number of the + event should be passed as 'serial'. + + The parent of a grabbing popup must either be an xdg_toplevel surface or + another xdg_popup with an explicit grab. If the parent is another + xdg_popup it means that the popups are nested, with this popup now being + the topmost popup. + + Nested popups must be destroyed in the reverse order they were created + in, e.g. the only popup you are allowed to destroy at all times is the + topmost one. + + When compositors choose to dismiss a popup, they may dismiss every + nested grabbing popup as well. When a compositor dismisses popups, it + will follow the same dismissing order as required from the client. + + If the topmost grabbing popup is destroyed, the grab will be returned to + the parent of the popup, if that parent previously had an explicit grab. + + If the parent is a grabbing popup which has already been dismissed, this + popup will be immediately dismissed. If the parent is a popup that did + not take an explicit grab, an error will be raised. + + During a popup grab, the client owning the grab will receive pointer + and touch events for all their surfaces as normal (similar to an + "owner-events" grab in X11 parlance), while the top most grabbing popup + will always have keyboard focus. + + + + + + + + This event asks the popup surface to configure itself given the + configuration. The configured state should not be applied immediately. + See xdg_surface.configure for details. + + The x and y arguments represent the position the popup was placed at + given the xdg_positioner rule, relative to the upper left corner of the + window geometry of the parent surface. + + For version 2 or older, the configure event for an xdg_popup is only + ever sent once for the initial configuration. Starting with version 3, + it may be sent again if the popup is setup with an xdg_positioner with + set_reactive requested, or in response to xdg_popup.reposition requests. + + + + + + + + + + The popup_done event is sent out when a popup is dismissed by the + compositor. The client should destroy the xdg_popup object at this + point. + + + + + + + + Reposition an already-mapped popup. The popup will be placed given the + details in the passed xdg_positioner object, and a + xdg_popup.repositioned followed by xdg_popup.configure and + xdg_surface.configure will be emitted in response. Any parameters set + by the previous positioner will be discarded. + + The passed token will be sent in the corresponding + xdg_popup.repositioned event. The new popup position will not take + effect until the corresponding configure event is acknowledged by the + client. See xdg_popup.repositioned for details. The token itself is + opaque, and has no other special meaning. + + If multiple reposition requests are sent, the compositor may skip all + but the last one. + + If the popup is repositioned in response to a configure event for its + parent, the client should send an xdg_positioner.set_parent_configure + and possibly an xdg_positioner.set_parent_size request to allow the + compositor to properly constrain the popup. + + If the popup is repositioned together with a parent that is being + resized, but not in response to a configure event, the client should + send an xdg_positioner.set_parent_size request. + + + + + + + + The repositioned event is sent as part of a popup configuration + sequence, together with xdg_popup.configure and lastly + xdg_surface.configure to notify the completion of a reposition request. + + The repositioned event is to notify about the completion of a + xdg_popup.reposition request. The token argument is the token passed + in the xdg_popup.reposition request. + + Immediately after this event is emitted, xdg_popup.configure and + xdg_surface.configure will be sent with the updated size and position, + as well as a new configure serial. + + The client should optionally update the content of the popup, but must + acknowledge the new popup configuration for the new position to take + effect. See xdg_surface.ack_configure for details. + + + + + + diff --git a/docs/compat.dox b/docs/compat.dox index e9506c57..49b52bf4 100644 --- a/docs/compat.dox +++ b/docs/compat.dox @@ -100,54 +100,45 @@ has sole responsibility for interacting well with every compositor in use on Unix-like systems. Most of the features are provided by the core protocol, while cursor support is provided by the libwayland-cursor helper library, EGL integration by libwayland-egl, and keyboard handling by -[libxkbcommon](https://xkbcommon.org/). In addition, GLFW uses some protocols -from wayland-protocols to provide additional features if the compositor -supports them. +[libxkbcommon](https://xkbcommon.org/). In addition, GLFW uses some additional +Wayland protocols to implement certain features if the compositor supports them. GLFW uses xkbcommon 0.5.0 to provide key and text input support. Earlier versions are not supported. -GLFW uses the [xdg-shell -protocol](https://cgit.freedesktop.org/wayland/wayland-protocols/tree/stable/xdg-shell/xdg-shell.xml) -to provide better window management. This protocol is part of -wayland-protocols 1.12, and is mandatory for GLFW to display a window. +GLFW uses the [xdg-shell protocol](https://wayland.app/protocols/xdg-shell) +to provide better window management. This protocol is mandatory for GLFW to +display a window. -GLFW uses the [relative pointer -protocol](https://cgit.freedesktop.org/wayland/wayland-protocols/tree/unstable/relative-pointer/relative-pointer-unstable-v1.xml) -alongside the [pointer constraints -protocol](https://cgit.freedesktop.org/wayland/wayland-protocols/tree/unstable/pointer-constraints/pointer-constraints-unstable-v1.xml) -to implement disabled cursor. These two protocols are part of -wayland-protocols 1.1, and mandatory at build time. If the running compositor -does not support both of these protocols, disabling the cursor will have no -effect. +GLFW uses the +[relative pointer protocol](https://wayland.app/protocols/relative-pointer-unstable-v1) +alongside the +[pointer constraints protocol](https://wayland.app/protocols/pointer-constraints-unstable-v1) +to implement disabled cursor. If the running compositor does not support both +of these protocols, disabling the cursor will have no effect. -GLFW uses the [idle inhibit -protocol](https://cgit.freedesktop.org/wayland/wayland-protocols/tree/unstable/idle-inhibit/idle-inhibit-unstable-v1.xml) -to prohibit the screensaver from starting. This protocol is part of -wayland-protocols 1.6, and mandatory at build time. If the running compositor -does not support this protocol, the screensaver may start even for full screen -windows. +GLFW uses the +[idle inhibit protocol](https://wayland.app/protocols/idle-inhibit-unstable-v1) +to prohibit the screensaver from starting. If the running compositor does not +support this protocol, the screensaver may start even for full screen windows. -GLFW uses the [libdecor library](https://gitlab.freedesktop.org/libdecor/libdecor) -for window decorations, where available. This in turn provides good quality -client-side decorations (drawn by the application) on desktop systems that do -not support server-side decorations (drawn by the window manager). On systems -that do not provide either libdecor or xdg-decoration, very basic window -decorations are provided. These do not include the window title or any caption -buttons. +GLFW uses the +[libdecor library](https://gitlab.freedesktop.org/libdecor/libdecor) for window +decorations, where available. This in turn provides good quality client-side +decorations (drawn by the application) on desktop systems that do not support +server-side decorations (drawn by the window manager). On systems that do not +provide either libdecor or xdg-decoration, very basic window decorations are +provided. These do not include the window title or any caption buttons. -GLFW uses the [xdg-decoration -protocol](https://cgit.freedesktop.org/wayland/wayland-protocols/tree/unstable/xdg-decoration/xdg-decoration-unstable-v1.xml) +GLFW uses the +[xdg-decoration protocol](https://wayland.app/protocols/xdg-decoration-unstable-v1) to request decorations to be drawn around its windows. This protocol is part of wayland-protocols 1.15, and mandatory at build time. If the running compositor does not support this protocol, a very simple frame will be drawn by -GLFW itself, using the [viewporter -protocol](https://cgit.freedesktop.org/wayland/wayland-protocols/tree/stable/viewporter/viewporter.xml) -alongside -[subsurfaces](https://cgit.freedesktop.org/wayland/wayland/tree/protocol/wayland.xml#n2598). -This protocol is part of wayland-protocols 1.4, and mandatory at build time. -If the running compositor does not support this protocol either, no decorations -will be drawn around windows. +GLFW itself, using the +[viewporter protocol](https://wayland.app/protocols/viewporter) +alongside subsurfaces. If the running compositor does not support these +protocols either, no decorations will be drawn around windows. @section compat_glx GLX extensions diff --git a/docs/compile.dox b/docs/compile.dox index 3490eb15..4968af40 100644 --- a/docs/compile.dox +++ b/docs/compile.dox @@ -83,29 +83,28 @@ development packages installed. They are not needed to build or run programs th GLFW. You will also need to set the @ref GLFW_BUILD_WAYLAND CMake option in the next step when generating build files. -On Debian and derivatives like Ubuntu and Linux Mint you will need the `libwayland-dev`, -`libxkbcommon-dev` and `wayland-protocols` packages and the `xorg-dev` meta-package. -These will pull in all other dependencies. +On Debian and derivatives like Ubuntu and Linux Mint you will need the `libwayland-dev` +and `libxkbcommon-dev` packages and the `xorg-dev` meta-package. These will pull in all +other dependencies. @code{.sh} -sudo apt install libwayland-dev libxkbcommon-dev wayland-protocols xorg-dev +sudo apt install libwayland-dev libxkbcommon-dev xorg-dev @endcode On Fedora and derivatives like Red Hat you will need the `wayland-devel`, -`libxkbcommon-devel`, `wayland-protocols-devel`, `libXcursor-devel`, `libXi-devel`, -`libXinerama-devel` and `libXrandr-devel` packages. These will pull in all other -dependencies. +`libxkbcommon-devel`, `libXcursor-devel`, `libXi-devel`, `libXinerama-devel` and +`libXrandr-devel` packages. These will pull in all other dependencies. @code{.sh} -sudo dnf install wayland-devel libxkbcommon-devel wayland-protocols-devel libXcursor-devel libXi-devel libXinerama-devel libXrandr-devel +sudo dnf install wayland-devel libxkbcommon-devel libXcursor-devel libXi-devel libXinerama-devel libXrandr-devel @endcode -On FreeBSD you will need the `wayland`, `libxkbcommon` and `wayland-protocols` packages. -The X11 headers are installed along the end-user X11 packages, so if you have an X server -running you should have the headers as well. If not, install the `xorgproto` package. +On FreeBSD you will need the `wayland` and `libxkbcommon` packages. The X11 headers are +installed along the end-user X11 packages, so if you have an X server running you should +have the headers as well. If not, install the `xorgproto` package. @code{.sh} -pkg install wayland libxkbcommon wayland-protocols xorgproto +pkg install wayland libxkbcommon xorgproto @endcode Once you have the required dependencies, move on to @ref compile_generate. diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 7b84ecf2..d1ccf484 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -72,47 +72,36 @@ if (GLFW_BUILD_WAYLAND) endif() find_program(WAYLAND_SCANNER_EXECUTABLE NAMES wayland-scanner) + if (NOT WAYLAND_SCANNER_EXECUTABLE) + message(FATAL_ERROR "Failed to find wayland-scanner") + endif() - include(FindPkgConfig) - pkg_check_modules(WAYLAND_PROTOCOLS REQUIRED wayland-protocols>=1.15) - pkg_get_variable(WAYLAND_PROTOCOLS_BASE wayland-protocols pkgdatadir) - pkg_get_variable(WAYLAND_CLIENT_PKGDATADIR wayland-client pkgdatadir) + macro(generate_wayland_protocol protocol_file) + set(protocol_path "${GLFW_SOURCE_DIR}/deps/wayland/${protocol_file}") - macro(wayland_generate protocol_file output_file) - add_custom_command(OUTPUT "${output_file}.h" - COMMAND "${WAYLAND_SCANNER_EXECUTABLE}" client-header "${protocol_file}" "${output_file}.h" - DEPENDS "${protocol_file}" + string(REGEX REPLACE "\\.xml$" "-client-protocol.h" header_file ${protocol_file}) + string(REGEX REPLACE "\\.xml$" "-client-protocol-code.h" code_file ${protocol_file}) + + add_custom_command(OUTPUT ${header_file} + COMMAND "${WAYLAND_SCANNER_EXECUTABLE}" client-header "${protocol_path}" ${header_file} + DEPENDS "${protocol_path}" VERBATIM) - add_custom_command(OUTPUT "${output_file}-code.h" - COMMAND "${WAYLAND_SCANNER_EXECUTABLE}" private-code "${protocol_file}" "${output_file}-code.h" - DEPENDS "${protocol_file}" + add_custom_command(OUTPUT ${code_file} + COMMAND "${WAYLAND_SCANNER_EXECUTABLE}" private-code "${protocol_path}" ${code_file} + DEPENDS "${protocol_path}" VERBATIM) - target_sources(glfw PRIVATE "${output_file}.h" "${output_file}-code.h") + target_sources(glfw PRIVATE ${header_file} ${code_file}) endmacro() - wayland_generate( - "${WAYLAND_CLIENT_PKGDATADIR}/wayland.xml" - "${GLFW_BINARY_DIR}/src/wayland-client-protocol") - wayland_generate( - "${WAYLAND_PROTOCOLS_BASE}/stable/xdg-shell/xdg-shell.xml" - "${GLFW_BINARY_DIR}/src/wayland-xdg-shell-client-protocol") - wayland_generate( - "${WAYLAND_PROTOCOLS_BASE}/unstable/xdg-decoration/xdg-decoration-unstable-v1.xml" - "${GLFW_BINARY_DIR}/src/wayland-xdg-decoration-client-protocol") - wayland_generate( - "${WAYLAND_PROTOCOLS_BASE}/stable/viewporter/viewporter.xml" - "${GLFW_BINARY_DIR}/src/wayland-viewporter-client-protocol") - wayland_generate( - "${WAYLAND_PROTOCOLS_BASE}/unstable/relative-pointer/relative-pointer-unstable-v1.xml" - "${GLFW_BINARY_DIR}/src/wayland-relative-pointer-unstable-v1-client-protocol") - wayland_generate( - "${WAYLAND_PROTOCOLS_BASE}/unstable/pointer-constraints/pointer-constraints-unstable-v1.xml" - "${GLFW_BINARY_DIR}/src/wayland-pointer-constraints-unstable-v1-client-protocol") - wayland_generate( - "${WAYLAND_PROTOCOLS_BASE}/unstable/idle-inhibit/idle-inhibit-unstable-v1.xml" - "${GLFW_BINARY_DIR}/src/wayland-idle-inhibit-unstable-v1-client-protocol") + generate_wayland_protocol("wayland.xml") + generate_wayland_protocol("viewporter.xml") + generate_wayland_protocol("xdg-shell.xml") + generate_wayland_protocol("idle-inhibit-unstable-v1.xml") + generate_wayland_protocol("pointer-constraints-unstable-v1.xml") + generate_wayland_protocol("relative-pointer-unstable-v1.xml") + generate_wayland_protocol("xdg-decoration-unstable-v1.xml") endif() if (WIN32 AND GLFW_BUILD_SHARED_LIBRARY) @@ -167,6 +156,8 @@ if (GLFW_BUILD_COCOA) endif() if (GLFW_BUILD_WAYLAND) + include(FindPkgConfig) + pkg_check_modules(Wayland REQUIRED wayland-client>=0.2.7 wayland-cursor>=0.2.7 diff --git a/src/wl_init.c b/src/wl_init.c index fd6b7e9c..5790cfc4 100644 --- a/src/wl_init.c +++ b/src/wl_init.c @@ -43,12 +43,12 @@ #include #include "wayland-client-protocol.h" -#include "wayland-xdg-shell-client-protocol.h" -#include "wayland-xdg-decoration-client-protocol.h" -#include "wayland-viewporter-client-protocol.h" -#include "wayland-relative-pointer-unstable-v1-client-protocol.h" -#include "wayland-pointer-constraints-unstable-v1-client-protocol.h" -#include "wayland-idle-inhibit-unstable-v1-client-protocol.h" +#include "xdg-shell-client-protocol.h" +#include "xdg-decoration-unstable-v1-client-protocol.h" +#include "viewporter-client-protocol.h" +#include "relative-pointer-unstable-v1-client-protocol.h" +#include "pointer-constraints-unstable-v1-client-protocol.h" +#include "idle-inhibit-unstable-v1-client-protocol.h" // NOTE: Versions of wayland-scanner prior to 1.17.91 named every global array of // wl_interface pointers 'types', making it impossible to combine several unmodified @@ -60,27 +60,27 @@ #undef types #define types _glfw_xdg_shell_types -#include "wayland-xdg-shell-client-protocol-code.h" +#include "xdg-shell-client-protocol-code.h" #undef types #define types _glfw_xdg_decoration_types -#include "wayland-xdg-decoration-client-protocol-code.h" +#include "xdg-decoration-unstable-v1-client-protocol-code.h" #undef types #define types _glfw_viewporter_types -#include "wayland-viewporter-client-protocol-code.h" +#include "viewporter-client-protocol-code.h" #undef types #define types _glfw_relative_pointer_types -#include "wayland-relative-pointer-unstable-v1-client-protocol-code.h" +#include "relative-pointer-unstable-v1-client-protocol-code.h" #undef types #define types _glfw_pointer_constraints_types -#include "wayland-pointer-constraints-unstable-v1-client-protocol-code.h" +#include "pointer-constraints-unstable-v1-client-protocol-code.h" #undef types #define types _glfw_idle_inhibit_types -#include "wayland-idle-inhibit-unstable-v1-client-protocol-code.h" +#include "idle-inhibit-unstable-v1-client-protocol-code.h" #undef types static void wmBaseHandlePing(void* userData, @@ -805,13 +805,11 @@ int _glfwInitWayland(void) } } -#ifdef WL_KEYBOARD_REPEAT_INFO_SINCE_VERSION if (wl_seat_get_version(_glfw.wl.seat) >= WL_KEYBOARD_REPEAT_INFO_SINCE_VERSION) { _glfw.wl.keyRepeatTimerfd = timerfd_create(CLOCK_MONOTONIC, TFD_CLOEXEC | TFD_NONBLOCK); } -#endif if (!_glfw.wl.wmBase) { diff --git a/src/wl_monitor.c b/src/wl_monitor.c index 0b1a3d8d..b56f3dfb 100644 --- a/src/wl_monitor.c +++ b/src/wl_monitor.c @@ -130,8 +130,6 @@ static void outputHandleScale(void* userData, } } -#ifdef WL_OUTPUT_NAME_SINCE_VERSION - void outputHandleName(void* userData, struct wl_output* wl_output, const char* name) { struct _GLFWmonitor* monitor = userData; @@ -145,18 +143,14 @@ void outputHandleDescription(void* userData, { } -#endif // WL_OUTPUT_NAME_SINCE_VERSION - static const struct wl_output_listener outputListener = { outputHandleGeometry, outputHandleMode, outputHandleDone, outputHandleScale, -#ifdef WL_OUTPUT_NAME_SINCE_VERSION outputHandleName, outputHandleDescription, -#endif }; @@ -173,11 +167,7 @@ void _glfwAddOutputWayland(uint32_t name, uint32_t version) return; } -#ifdef WL_OUTPUT_NAME_SINCE_VERSION version = _glfw_min(version, WL_OUTPUT_NAME_SINCE_VERSION); -#else - version = 2; -#endif struct wl_output* output = wl_registry_bind(_glfw.wl.registry, name, diff --git a/src/wl_window.c b/src/wl_window.c index 7c509896..86b5b0fd 100644 --- a/src/wl_window.c +++ b/src/wl_window.c @@ -44,12 +44,12 @@ #include #include "wayland-client-protocol.h" -#include "wayland-xdg-shell-client-protocol.h" -#include "wayland-xdg-decoration-client-protocol.h" -#include "wayland-viewporter-client-protocol.h" -#include "wayland-relative-pointer-unstable-v1-client-protocol.h" -#include "wayland-pointer-constraints-unstable-v1-client-protocol.h" -#include "wayland-idle-inhibit-unstable-v1-client-protocol.h" +#include "xdg-shell-client-protocol.h" +#include "xdg-decoration-unstable-v1-client-protocol.h" +#include "viewporter-client-protocol.h" +#include "relative-pointer-unstable-v1-client-protocol.h" +#include "pointer-constraints-unstable-v1-client-protocol.h" +#include "idle-inhibit-unstable-v1-client-protocol.h" #define GLFW_BORDER_SIZE 4 #define GLFW_CAPTION_HEIGHT 24 @@ -1756,7 +1756,6 @@ static void keyboardHandleModifiers(void* userData, } } -#ifdef WL_KEYBOARD_REPEAT_INFO_SINCE_VERSION static void keyboardHandleRepeatInfo(void* userData, struct wl_keyboard* keyboard, int32_t rate, @@ -1768,7 +1767,6 @@ static void keyboardHandleRepeatInfo(void* userData, _glfw.wl.keyRepeatRate = rate; _glfw.wl.keyRepeatDelay = delay; } -#endif static const struct wl_keyboard_listener keyboardListener = { @@ -1777,9 +1775,7 @@ static const struct wl_keyboard_listener keyboardListener = keyboardHandleLeave, keyboardHandleKey, keyboardHandleModifiers, -#ifdef WL_KEYBOARD_REPEAT_INFO_SINCE_VERSION keyboardHandleRepeatInfo, -#endif }; static void seatHandleCapabilities(void* userData,