[llvm] Proofread *.rst (#151087)

This patch hyphenates words that are used as adjecives, such as:

- architecture specific
- human readable
- implementation defined
- language independent
- language specific
- machine readable
- machine specific
- target independent
- target specific

llvm/docs/AMDGPUDwarfExtensionsForHeterogeneousDebugging.rst

@@ -1187,7 +1187,7 @@ There are five kinds of location storage:
   operations. It would specify the debugger information entry and byte offset
   provided by the operations.
 
-*Location descriptions are a language independent representation of addressing
+*Location descriptions are a language-independent representation of addressing
 rules.*
 
 * *They can be the result of evaluating a debugger information entry attribute
@@ -1523,8 +1523,8 @@ expression.
       states that relocation of references from one executable or shared object
       file to another must be performed by the consumer. But given that DR is
       defined as an offset in a ``.debug_info`` section this seems impossible.
-      If DR was defined as an implementation defined value, then the consumer
-      could choose to interpret the value in an implementation defined manner to
+      If DR was defined as an implementation-defined value, then the consumer
+      could choose to interpret the value in an implementation-defined manner to
       reference a debug information in another executable or shared object.
 
       In ELF the ``.debug_info`` section is in a non-\ ``PT_LOAD`` segment so
@@ -4188,7 +4188,7 @@ The register rules are:
     conversion as the bit contents of the register is simply interpreted as a
     value of the address.
 
-    GDB has a per register hook that allows a target specific conversion on a
+    GDB has a per register hook that allows a target-specific conversion on a
     register by register basis. It defaults to truncation of bigger registers,
     and to actually reading bytes from the next register (or reads out of bounds
     for the last register) for smaller registers. There are no GDB tests that

llvm/docs/AMDGPUUsage.rst

@@ -1890,7 +1890,7 @@ The AMDGPU backend supports the following calling conventions:
 AMDGPU MCExpr
 -------------
 
-As part of the AMDGPU MC layer, AMDGPU provides the following target specific
+As part of the AMDGPU MC layer, AMDGPU provides the following target-specific
 ``MCExpr``\s.
 
   .. table:: AMDGPU MCExpr types:

llvm/docs/CodeGenerator.rst

@@ -323,7 +323,7 @@ provide one of these objects through the ``getJITInfo`` method.
 Machine code description classes
 ================================
 
-At the high-level, LLVM code is translated to a machine specific representation
+At the high-level, LLVM code is translated to a machine-specific representation
 formed out of :raw-html:`<tt>` `MachineFunction`_ :raw-html:`</tt>`,
 :raw-html:`<tt>` `MachineBasicBlock`_ :raw-html:`</tt>`, and :raw-html:`<tt>`
 `MachineInstr`_ :raw-html:`</tt>` instances (defined in
@@ -462,7 +462,7 @@ code:
   ret
 
 This approach is extremely general (if it can handle the X86 architecture, it
-can handle anything!) and allows all of the target specific knowledge about the
+can handle anything!) and allows all of the target-specific knowledge about the
 instruction stream to be isolated in the instruction selector.  Note that
 physical registers should have a short lifetime for good code generation, and
 all physical registers are assumed dead on entry to and exit from basic blocks
@@ -634,7 +634,7 @@ file (MCObjectStreamer).  MCAsmStreamer is a straightforward implementation
 that prints out a directive for each method (e.g. ``EmitValue -> .byte``), but
 MCObjectStreamer implements a full assembler.
 
-For target specific directives, the MCStreamer has a MCTargetStreamer instance.
+For target-specific directives, the MCStreamer has a MCTargetStreamer instance.
 Each target that needs it defines a class that inherits from it and is a lot
 like MCStreamer itself: It has one method per directive and two classes that
 inherit from it, a target object streamer and a target asm streamer. The target

llvm/docs/CommandGuide/llvm-bcanalyzer.rst

@@ -14,7 +14,7 @@ DESCRIPTION
 The :program:`llvm-bcanalyzer` command is a small utility for analyzing bitcode
 files.  The tool reads a bitcode file (such as generated with the
 :program:`llvm-as` tool) and produces a statistical report on the contents of
-the bitcode file.  The tool can also dump a low level but human readable
+the bitcode file.  The tool can also dump a low level but human-readable
 version of the bitcode file.  This tool is probably not of much interest or
 utility except for those working directly with the bitcode file format.  Most
 LLVM users can just ignore this tool.
@@ -30,7 +30,7 @@ OPTIONS
 
 .. option:: --dump
 
- Causes :program:`llvm-bcanalyzer` to dump the bitcode in a human readable
+ Causes :program:`llvm-bcanalyzer` to dump the bitcode in a human-readable
  format.  This format is significantly different from LLVM assembly and
  provides details about the encoding of the bitcode file.
 

llvm/docs/CommandGuide/llvm-debuginfo-analyzer.rst

@@ -14,7 +14,7 @@ DESCRIPTION
 -----------
 :program:`llvm-debuginfo-analyzer` parses debug and text sections in
 binary object files and prints their contents in a logical view, which
-is a human readable representation that closely matches the structure
+is a human-readable representation that closely matches the structure
 of the original user source code. Supported object file formats include
 ELF, Mach-O, WebAssembly, PDB and COFF.
 

llvm/docs/CommandGuide/llvm-exegesis.rst

@@ -106,7 +106,7 @@ properly.
   using the loop repetition mode. :program:`llvm-exegesis` needs to keep track
   of the current loop iteration within the loop repetition mode in a performant
   manner (i.e., no memory accesses), and uses a register to do this. This register
-  has an architecture specific default (e.g., `R8` on X86), but this might conflict
+  has an architecture-specific default (e.g., `R8` on X86), but this might conflict
   with some snippets. This annotation allows changing the register to prevent
   interference between the loop index register and the snippet.
 

llvm/docs/CommandGuide/llvm-ifs.rst

@@ -11,7 +11,7 @@ SYNOPSIS
 DESCRIPTION
 -----------
 
-:program:`llvm-ifs` is a tool that jointly produces human readable text-based
+:program:`llvm-ifs` is a tool that jointly produces human-readable text-based
 stubs (.ifs files) for shared objects and linkable shared object stubs
 (.so files) from either ELF shared objects or text-based stubs. The text-based
 stubs is useful for monitoring ABI changes of the shared object. The linkable

llvm/docs/CommandGuide/llvm-locstats.rst

@@ -13,7 +13,7 @@ DESCRIPTION
 
 :program:`llvm-locstats` works like a wrapper around :program:`llvm-dwarfdump`.
 It parses :program:`llvm-dwarfdump` statistics regarding debug location by
-pretty printing it in a more human readable way.
+pretty printing it in a more human-readable way.
 
 The line 0% shows the number and the percentage of DIEs with no location
 information, but the line 100% shows the information for DIEs where there is

llvm/docs/CommandGuide/llvm-mca.rst

@@ -241,7 +241,7 @@ option specifies "``-``", then the output will also be sent to standard output.
 .. option:: -disable-cb
 
   Force usage of the generic CustomBehaviour and InstrPostProcess classes rather
-  than using the target specific implementation. The generic classes never
+  than using the target-specific implementation. The generic classes never
   detect any custom hazards or make any post processing modifications to
   instructions.
 
@@ -1125,9 +1125,9 @@ CustomBehaviour class can be used in these cases to enforce proper
 instruction modeling (often by customizing data dependencies and detecting
 hazards that :program:`llvm-mca` has no way of knowing about).
 
-:program:`llvm-mca` comes with one generic and multiple target specific
+:program:`llvm-mca` comes with one generic and multiple target-specific
 CustomBehaviour classes. The generic class will be used if the ``-disable-cb``
-flag is used or if a target specific CustomBehaviour class doesn't exist for
+flag is used or if a target-specific CustomBehaviour class doesn't exist for
 that target. (The generic class does nothing.) Currently, the CustomBehaviour
 class is only a part of the in-order pipeline, but there are plans to add it
 to the out-of-order pipeline in the future.
@@ -1141,7 +1141,7 @@ if you don't know the exact number and a value of 0 represents no stall).
 
 If you'd like to add a CustomBehaviour class for a target that doesn't
 already have one, refer to an existing implementation to see how to set it
-up. The classes are implemented within the target specific backend (for
+up. The classes are implemented within the target-specific backend (for
 example `/llvm/lib/Target/AMDGPU/MCA/`) so that they can access backend symbols.
 
 Instrument Manager
@@ -1177,12 +1177,12 @@ classes (MCSubtargetInfo, MCInstrInfo, etc.), please add it to the
 AND requires unexposed backend symbols or functionality, you can define it in
 the `/lib/Target/<TargetName>/MCA/` directory.
 
-To enable this target specific View, you will have to use this target's
+To enable this target-specific View, you will have to use this target's
 CustomBehaviour class to override the `CustomBehaviour::getViews()` methods.
 There are 3 variations of these methods based on where you want your View to
 appear in the output: `getStartViews()`, `getPostInstrInfoViews()`, and
 `getEndViews()`. These methods returns a vector of Views so you will want to
-return a vector containing all of the target specific Views for the target in
+return a vector containing all of the target-specific Views for the target in
 question.
 
 Because these target specific (and backend dependent) Views require the

llvm/docs/CommandGuide/llvm-profdata.rst

@@ -338,7 +338,7 @@ OPTIONS
 
  Instruct the profile dumper to show profile counts in the text format of the
  instrumentation-based profile data representation. By default, the profile
- information is dumped in a more human readable form (also in text) with
+ information is dumped in a more human-readable form (also in text) with
  annotations.
 
 .. option:: --topn=<n>

llvm/docs/CommandGuide/llvm-symbolizer.rst

@@ -371,7 +371,7 @@ OPTIONS
   * Prints an address's debug-data discriminator when it is non-zero. One way to
     produce discriminators is to compile with clang's -fdebug-info-for-profiling.
 
-  ``JSON`` style provides a machine readable output in JSON. If addresses are
+  ``JSON`` style provides a machine-readable output in JSON. If addresses are
     supplied via stdin, the output JSON will be a series of individual objects.
     Otherwise, all results will be contained in a single array.
 
@@ -444,7 +444,7 @@ OPTIONS
 
 .. option:: --pretty-print, -p
 
-  Print human readable output. If :option:`--inlining` is specified, the
+  Print human-readable output. If :option:`--inlining` is specified, the
   enclosing scope is prefixed by (inlined by).
   For JSON output, the option will cause JSON to be indented and split over
   new lines. Otherwise, the JSON output will be printed in a compact form.

llvm/docs/DirectX/DXContainer.rst

@@ -280,7 +280,7 @@ elements are:
    This represents ``f5`` in the source.
 
 The LLVM ``obj2yaml`` tool can parse this data out of the PSV and present it in
-human readable YAML. For the example above it produces the output:
+human-readable YAML. For the example above it produces the output:
 
 .. code-block:: YAML
 

llvm/docs/Frontend/PerformanceTips.rst

@@ -35,7 +35,7 @@ The Basics
 ^^^^^^^^^^^
 
 #. Make sure that your Modules contain both a data layout specification and
-   target triple. Without these pieces, non of the target specific optimization
+   target triple. Without these pieces, non of the target-specific optimization
    will be enabled.  This can have a major effect on the generated code quality.
 
 #. For each function or global emitted, use the most private linkage type

llvm/docs/FuzzingLLVM.rst

@@ -128,7 +128,7 @@ llvm-mc-assemble-fuzzer
 -----------------------
 
 A |generic fuzzer| that fuzzes the MC layer's assemblers by treating inputs as
-target specific assembly.
+target-specific assembly.
 
 Note that this fuzzer has an unusual command line interface which is not fully
 compatible with all of libFuzzer's features. Fuzzer arguments must be passed

llvm/docs/GettingStarted.rst

@@ -919,11 +919,11 @@ the `Command Guide <CommandGuide/index.html>`_.
 
 ``llvm-as``
 
-  The assembler transforms the human readable LLVM assembly to LLVM bitcode.
+  The assembler transforms the human-readable LLVM assembly to LLVM bitcode.
 
 ``llvm-dis``
 
-  The disassembler transforms the LLVM bitcode to human readable LLVM assembly.
+  The disassembler transforms the LLVM bitcode to human-readable LLVM assembly.
 
 ``llvm-link``
 

llvm/docs/GlobalISel/GMIR.rst

@@ -26,7 +26,7 @@ Generic Machine Instructions
   Reference.
 
 Whereas MIR deals largely in Target Instructions and only has a small set of
-target independent opcodes such as ``COPY``, ``PHI``, and ``REG_SEQUENCE``,
+target-independent opcodes such as ``COPY``, ``PHI``, and ``REG_SEQUENCE``,
 gMIR defines a rich collection of ``Generic Opcodes`` which are target
 independent and describe operations which are typically supported by targets.
 One example is ``G_ADD`` which is the generic opcode for an integer addition.

llvm/docs/GlobalISel/GenericOpcode.rst

@@ -1105,7 +1105,7 @@ G_TRAP, G_DEBUGTRAP, G_UBSANTRAP
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Represents :ref:`llvm.trap <llvm.trap>`, :ref:`llvm.debugtrap <llvm.debugtrap>`
-and :ref:`llvm.ubsantrap <llvm.ubsantrap>` that generate a target dependent
+and :ref:`llvm.ubsantrap <llvm.ubsantrap>` that generate a target-dependent
 trap instructions.
 
 .. code-block:: none

llvm/docs/GlobalISel/Pipeline.rst

@@ -80,7 +80,7 @@ Combiner
   alternatives but Combiners can also focus on code size or other metrics.
 
 Additional passes such as these can be inserted to support higher optimization
-levels or target specific needs. A likely pipeline is:
+levels or target-specific needs. A likely pipeline is:
 
 .. image:: pipeline-overview-with-combiners.png
 

llvm/docs/HowToUpdateDebugInfo.rst

@@ -499,7 +499,7 @@ a JSON file as follows:
   $ opt -verify-debuginfo-preserve -verify-di-preserve-export=sample.json -pass-to-test sample.ll
 
 and then use the ``llvm/utils/llvm-original-di-preservation.py`` script
-to generate an HTML page with the issues reported in a more human readable form
+to generate an HTML page with the issues reported in a more human-readable form
 as follows:
 
 .. code-block:: bash

llvm/docs/JITLink.rst

@@ -1072,7 +1072,7 @@ Major outstanding projects include:
 
 * Refactor architecture support to maximize sharing across formats.
 
-  All formats should be able to share the bulk of the architecture specific
+  All formats should be able to share the bulk of the architecture-specific
   code (especially relocations) for each supported architecture.
 
 * Refactor ELF link graph construction.

llvm/docs/LangRef.rst

@@ -26,7 +26,7 @@ readable assembly language representation. This allows LLVM to provide a
 powerful intermediate representation for efficient compiler
 transformations and analysis, while providing a natural means to debug
 and visualize the transformations. The three different forms of LLVM are
-all equivalent. This document describes the human readable
+all equivalent. This document describes the human-readable
 representation and notation.
 
 The LLVM representation aims to be light-weight and low-level while
@@ -21289,7 +21289,7 @@ Semantics:
 On some architectures the address of the code to be executed needs to be
 different than the address where the trampoline is actually stored. This
 intrinsic returns the executable address corresponding to ``tramp``
-after performing the required machine specific adjustments. The pointer
+after performing the required machine-specific adjustments. The pointer
 returned can then be :ref:`bitcast and executed <int_trampoline>`.
 
 
@@ -29382,7 +29382,7 @@ None.
 Semantics:
 """"""""""
 
-This intrinsic is lowered to the target dependent trap instruction. If
+This intrinsic is lowered to the target-dependent trap instruction. If
 the target does not have a trap instruction, this intrinsic will be
 lowered to a call of the ``abort()`` function.
 

llvm/docs/Lexicon.rst

@@ -192,7 +192,7 @@ L
 **LSDA**
     Language Specific Data Area.  C++ "zero cost" unwinding is built on top a
     generic unwinding mechanism.  As the unwinder walks each frame, it calls
-    a "personality" function to do language specific analysis.  Each function's
+    a "personality" function to do language-specific analysis.  Each function's
     FDE points to an optional LSDA which is passed to the personality function.
     For C++, the LSDA contain info about the type and location of catch
     statements in that function.

llvm/docs/MIRLangRef.rst

@@ -12,7 +12,7 @@ Introduction
 ============
 
 This document is a reference manual for the Machine IR (MIR) serialization
-format. MIR is a human readable serialization format that is used to represent
+format. MIR is a human-readable serialization format that is used to represent
 LLVM's :ref:`machine specific intermediate representation
 <machine code representation>`.
 
@@ -221,7 +221,7 @@ Machine Instructions Format Reference
 =====================================
 
 The machine basic blocks and their instructions are represented using a custom,
-human readable serialization language. This language is used in the
+human-readable serialization language. This language is used in the
 `YAML block literal string`_ that corresponds to the machine function's body.
 
 A source string that uses this language contains a list of machine basic

llvm/docs/PDB/CodeViewTypes.rst

@@ -123,7 +123,7 @@ The ``Size`` field of the Attributes bitmask is a 1-byte value indicating the
 pointer size.  For example, a `void*` would have a size of either 4 or 8 depending
 on the target architecture.  On the other hand, if ``Mode`` indicates that this is
 a pointer to member function or pointer to data member, then the size can be any
-implementation defined number.
+implementation-defined number.
 
 The ``Member Ptr Info`` field of the ``LF_POINTER`` record is only present if the
 attributes indicate that this is a pointer to member.

llvm/docs/SymbolizerMarkupFormat.rst

@@ -315,7 +315,7 @@ Trigger elements
 ================
 
 These elements cause an external action and will be presented to the user in a
-human readable form. Generally they trigger an external action to occur that
+human-readable form. Generally they trigger an external action to occur that
 results in a linkable page. The link or some other informative information about
 the external action can then be presented to the user.
 

llvm/docs/WritingAnLLVMBackend.rst

@@ -150,7 +150,7 @@ any other naming scheme will confuse ``llvm-config`` and produce a lot of
 To make your target actually do something, you need to implement a subclass of
 ``TargetMachine``.  This implementation should typically be in the file
 ``lib/Target/DummyTargetMachine.cpp``, but any file in the ``lib/Target``
-directory will be built and should work.  To use LLVM's target independent code
+directory will be built and should work.  To use LLVM's target-independent code
 generator, you should do what all current machine backends do: create a
 subclass of ``CodeGenTargetMachineImpl``.  (To create a target from scratch, create a
 subclass of ``TargetMachine``.)
@@ -1671,7 +1671,7 @@ For example in ``SparcTargetAsmInfo.cpp``:
   }
 
 The X86 assembly printer implementation (``X86TargetAsmInfo``) is an example
-where the target specific ``TargetAsmInfo`` class uses an overridden methods:
+where the target-specific ``TargetAsmInfo`` class uses an overridden methods:
 ``ExpandInlineAsm``.
 
 A target-specific implementation of ``AsmPrinter`` is written in

llvm/docs/WritingAnLLVMPass.rst

@@ -431,7 +431,7 @@ The ``print`` method
   virtual void print(llvm::raw_ostream &O, const Module *M) const;
 
 The ``print`` method must be implemented by "analyses" in order to print a
-human readable version of the analysis results.  This is useful for debugging
+human-readable version of the analysis results.  This is useful for debugging
 an analysis itself, as well as for other people to figure out how an analysis
 works.  Use the opt ``-analyze`` argument to invoke this method.
 

llvm/docs/tutorial/MyFirstLanguageFrontend/LangImpl10.rst

@@ -129,7 +129,7 @@ course, C source code is not actually portable in general either - ever
 port a really old application from 32- to 64-bits?).
 
 The problem with C (again, in its full generality) is that it is heavily
-laden with target specific assumptions. As one simple example, the
+laden with target-specific assumptions. As one simple example, the
 preprocessor often destructively removes target-independence from the
 code when it processes the input text: