Add documentation on debugging LLVM.

Reviewers: fmayer, nikic

Reviewed By: fmayer

Pull Request: https://github.com/llvm/llvm-project/pull/156128

llvm/docs/DebuggingLLVM.rst

@@ -0,0 +1,111 @@
+==============
+Debugging LLVM
+==============
+
+This document is a collection of tips and tricks for debugging LLVM
+using a source-level debugger. The assumption is that you are trying to
+figure out the root cause of a miscompilation in the program that you
+are compiling.
+
+Extract and rerun the compile command
+=====================================
+
+Extract the Clang command that produces the buggy code. The way to do
+this depends on the build system used by your program.
+
+- For Ninja-based build systems, you can pass ``-t commands`` to Ninja
+  and filter the output by the targeted source file name. For example:
+  ``ninja -t commands myprogram | grep path/to/file.cpp``.
+
+- For Bazel-based build systems using Bazel 9 or newer (not released yet
+  as of this writing), you can pass ``--output=commands`` to the ``bazel
+  aquery`` subcommand for a similar result. For example: ``bazel aquery
+  --output=commands 'deps(//myprogram)' | grep path/to/file.cpp``. Build
+  commands must generally be run from a subdirectory of the source
+  directory named ``bazel-$PROJECTNAME``. Bazel typically makes the target
+  paths of ``-o`` and ``-MF`` read-only when running commands outside
+  of a build, so it may be necessary to change or remove these flags.
+
+- A method that should work with any build system is to build your program
+  under `Bear <https://github.com/rizsotto/Bear>`_ and look for the
+  compile command in the resulting ``compile_commands.json`` file.
+
+Once you have the command you can use the following steps to debug
+it. Note that any flags mentioned later in this document are LLVM flags
+so they must be prefixed with ``-mllvm`` when passed to the Clang driver,
+e.g. ``-mllvm -print-after-all``.
+
+Understanding the source of the issue
+=====================================
+
+If you have a miscompilation introduced by a pass, it is
+frequently possible to identify the pass where things go wrong
+by searching a pass-by-pass printout, which is enabled using the
+``-print-after-all`` flag. Pipe stderr into ``less`` (append ``2>&1 |
+less`` to command line) and use text search to move between passes
+(e.g. type ``/Dump After<Enter>``, ``n`` to move to next pass,
+``N`` to move to previous pass). If the name of the function
+containing the buggy IR is known, you can filter the output by passing
+``-filter-print-funcs=functionname``. You can sometimes pass ``-debug`` to
+get useful details about what passes are doing. See also  `PrintPasses.cpp
+<https://github.com/llvm/llvm-project/blob/main/llvm/lib/IR/PrintPasses.cpp>`_
+for more useful options.
+
+Creating a debug build of LLVM
+==============================
+
+The subsequent debugging steps require a debug build of LLVM. Pass the
+``-DCMAKE_BUILD_TYPE=Debug`` to CMake in a separate build tree to create
+a debug build.
+
+Understanding where an instruction came from
+============================================
+
+A common debugging task involves understanding which part of the code
+introduced a buggy instruction. The pass-by-pass dump is sometimes enough,
+but for complex or unfamiliar passes, more information is often required.
+
+The first step is to record a run of the debug build of Clang under `rr
+<https://rr-project.org>`_ passing the LLVM flag ``-print-inst-addrs``
+together with ``-print-after-all`` and any desired filters. This will
+cause each instruction printed by LLVM to be suffixed with a comment
+showing the address of the ``Instruction`` object. You can then replay
+the run of Clang with ``rr replay``. Because ``rr`` is deterministic,
+the instruction will receive the same address during the replay, so
+you can break on the instruction's construction using a conditional
+breakpoint that checks for the address printed by LLVM, with commands
+such as the following:
+
+.. code-block:: text
+
+    b Instruction::Instruction if this == 0x12345678
+
+When the breakpoint is hit, you will likely be at the location where
+the instruction was created, so you can unwind the stack with ``bt``
+to see the stack trace. It is also possible that an instruction was
+created multiple times at the same address, so you may need to continue
+until reaching the desired location, but in the author's experience this
+is unlikely to occur.
+
+Identifying the source locations of instructions
+================================================
+
+To identify the source location that caused a particular instruction
+to be created, you can pass the LLVM flag ``-print-inst-debug-locs``
+and each instruction printed by LLVM is suffixed with the file and line
+number of the instruction according to the debug information. Note that
+this requires debug information to be enabled (e.g. pass ``-g`` to Clang).
+
+GDB pretty printers
+===================
+
+A handful of `GDB pretty printers
+<https://sourceware.org/gdb/onlinedocs/gdb/Pretty-Printing.html>`__ are
+provided for some of the core LLVM libraries. To use them, execute the
+following (or add it to your ``~/.gdbinit``)::
+
+  source /path/to/llvm/src/utils/gdb-scripts/prettyprinters.py
+
+It also might be handy to enable the `print pretty
+<https://sourceware.org/gdb/current/onlinedocs/gdb.html/Print-Settings.html>`__
+option to avoid data structures being printed as a big block of text.

llvm/docs/GettingStartedTutorials.rst

@@ -11,6 +11,7 @@ For those new to the LLVM system.
    GettingStarted
    GettingStartedVS
    ProgrammersManual
+   DebuggingLLVM
    tutorial/index
    MyFirstTypoFix
 
@@ -27,6 +28,9 @@ For those new to the LLVM system.
   Introduction to the general layout of the LLVM sourcebase, important classes
   and APIs, and some tips & tricks.
 
+:doc:`DebuggingLLVM`
+  Provides information about how to debug LLVM.
+
 :doc:`Frontend/PerformanceTips`
    A collection of tips for frontend authors on how to generate IR
    which LLVM is able to effectively optimize.

llvm/docs/ProgrammersManual.rst

@@ -2692,16 +2692,7 @@ with an ``assert``).
 Debugging
 =========
 
-A handful of `GDB pretty printers
-<https://sourceware.org/gdb/onlinedocs/gdb/Pretty-Printing.html>`__ are
-provided for some of the core LLVM libraries. To use them, execute the
-following (or add it to your ``~/.gdbinit``)::
-
-  source /path/to/llvm/src/utils/gdb-scripts/prettyprinters.py
-
-It also might be handy to enable the `print pretty
-<http://ftp.gnu.org/old-gnu/Manuals/gdb/html_node/gdb_57.html>`__ option to
-avoid data structures being printed as a big block of text.
+See :doc:`Debugging LLVM <DebuggingLLVM>`.
 
 .. _common:
 

llvm/lib/IR/AsmWriter.cpp

@@ -88,6 +88,8 @@
 
 using namespace llvm;
 
+// See https://llvm.org/docs/DebuggingLLVM.html for why these flags are useful.
+
 static cl::opt<bool>
     PrintInstAddrs("print-inst-addrs", cl::Hidden,
                    cl::desc("Print addresses of instructions when dumping"));