Start considering !amdgpu.no.remote.memory.access and
!amdgpu.no.fine.grained.host.memory metadata when deciding to expand
integer atomic operations. This does not yet attempt to accurately
handle fadd/fmin/fmax, which are trickier and require migrating the
old "amdgpu-unsafe-fp-atomics" attribute.
System scope atomics need to use cmpxchg loops if we know
nothing about the allocation the address is from.
aea5980e26e6a87dab9f8acb10eb3a59dd143cb1 started this, this
expands the set to cover the remaining integer operations.
Don't expand xchg and add, those theoretically should work over PCIe.
This is a pre-commit which will introduce performance regressions.
Subsequent changes will add handling of new atomicrmw metadata, which
will avoid the expansion.
Note this still isn't conservative enough; we do need to expand
some device scope atomics if the memory is in fine-grained remote
memory.
recreate this patch from
https://github.com/llvm/llvm-project/pull/153894
It seems ISel sliently ignore the `i64 = zext i16` with a chained
`reg_sequence` pattern and thus this is causing a selection failure in
hip test. Recreate a new patch with an alternative pattern, and added a
ll test global-extload-gfx11plus.ll
Recent upstream trends have moved away from explicitly using `-verify-machineinstrs`, as it's already covered by the expensive checks. This PR removes almost all `-verify-machineinstrs` from tests in `llvm/test/CodeGen/AMDGPU/*.ll`, leaving only those tests where its removal currently causes failures.
When true16 is enabled, isel start to emit sgpr_lo16 register when a
trunc/sext i16/i32 is generated, or a salu32 is used by vgpr16 or vice
versa. And this causes a problem as sgpr_lo16 is not fully supported in
the pipeline.
True16 mode works fine in -O3 mode since folding pass remove sgpr_lo16
from the pipeline. However it hit a problem in -O0 mode as folding pass
is skipped.
This patch did:
1. stop emitting sgpr_lo16 from isel
2. update codegen pattern to split uniformed/divergent pattern for
i16/i32 conversion
3. update fix-sgpr-copy pass to address legalization requirement in
true16 mode, update fix-sgpr-copies-f16-true16.mir
test to include all possible combinations
This patch is tested with cts and downstream repo with -O0 testing
The insertion point of COPY isn't always optimal and could eventually
lead to a worse block layout, see the regression test in the first
commit.
This change affects many architectures but the amount of total
instructions in the test cases seems too be slightly lower.
instructionWaitsForSGPRWrites function covers ALL SALU instructions,
including those like s_waitcnt that don't read from sgpr. This results
in removing delay_alu instructions in cases like VALU->SGPR->VALU, which
results in performance regression. Change modifies the function so that
it checks if instruction also reads a sgpr.
This is a NFC patch.
This patch run a bulk update on CodeGen tests that are impacted by the
true16 features. This patch applies:
1. duplicate GFX11plus runlines and apply them with
"+mattr=+real-true16" and "+mattr=-real-true16"
2. update the test with the update script
For some GISEL runlines, the current CodeGen do not fully support the
true16 version. Still update the runlines, but comment out the failing
one, and added a "FIXME-TRUE16" comment to that test for easier
tracking. These test will be fixed in the following patches.
This is in a transition state that we support both
"+real-true16/-real-true16" in our code base. We plan to move to
"+real-true16" as default, and finally remove "-real-true16" mode and
test lines.
The PR will fix the issue
https://github.com/llvm/llvm-project/issues/122728
This patch addresses the signed/zero extension of poison by using a
poison value of the extended type instead of a constant zero of the
extended type.
Re-apply https://github.com/llvm/llvm-project/pull/130577
Which is reverted in https://github.com/llvm/llvm-project/pull/133880
The old application failed in address sanitizer due to
`tryNarrowMathIfNoOverflow` was called after `I.eraseFromParent();` in
`AMDGPUCodeGenPrepareImpl::visitBinaryOperator`, it create a use after
free failure.
To fix this, `tryNarrowMathIfNoOverflow` will be called before and
directly return if `tryNarrowMathIfNoOverflow` result in true.
We have a VALU->SGPR->SALU (VALU writing to SGPR and SALU reading from
it). When VALU is issued, it increments internal counter VA_SDST used to
track use of this SGPR. SALU will not issue until VA_SDST is zero, that
is when VALU is finished writing. Therefore, delays added by s_delay_alu
are not needed in this situation.
We have a VALU->SGPR->SALU (VALU writing to SGPR and SALU reading from
it). When VALU is issued, it increments internal counter VA_SDST used to
track use of this SGPR. SALU will not issue until VA_SDST is zero, that
is when VALU is finished writing. Therefore, delays added by s_delay_alu
are not needed in this situation.
We need to promote 8/16-bit cases to 32-bit. Unfortunately we are
missing demanded bits optimizations on readfirstlane, so we end up
emitting
an and instruction on the input. I'm also surprised this pass isn't
handling
half or bfloat yet.
Given the rest of the pass just gives up when it needs to compose
subregisters, folding a subregister extract directly into a reg_sequence
is counterproductive. Later fold attempts in the function will give up
on the subregister operand, preventing looking up through the reg_sequence.
It may still be profitable to do these folds if we start handling
the composes. There are some test regressions, but this mostly
looks better.
MSG_DEALLOC_VGPRS slows down very small waveslot limited kernels. It's
been identified this message is only really needed for VGPR limited
kernels. A kernel becomes VGPR limited if a total number of VGPRs per
SIMD / number of used VGPRs is more than a number of wave slots.
global_wb with scopes lower than SCOPE_SYS is unnecessary for
correctness.
I was initially optimistic they would be very cheap no-ops but they can
actually be quite expensive so let's avoid them.
Always generate v_cndmask_b32 instead of modifying exec around
v_mov_b32. This is expected to be faster because
modifying exec generally causes pipeline stalls.
Optimize V_SET_INACTIVE by allow it to run in WWM.
Hence WWM sections are not broken up for inactive lane setting.
WWM V_SET_INACTIVE can typically be lower to V_CNDMASK.
Some cases require use of exec manipulation V_MOV as previous code.
GFX9 sees slight instruction count increase in edge cases due to
smaller constant bus.
Additionally avoid introducing exec manipulation and V_MOVs where
a source of V_SET_INACTIVE is the destination.
This is a common pattern as WWM register pre-allocation often
assigns the same register.
Any SGPR read by a VALU can potentially obscure SALU writes to the same
register.
Insert s_wait_alu instructions to mitigate the hazard on affected paths.
Compute a global cache of SGPRs with any VALU reads and use this to
avoid inserting mitigation for SGPRs never accessed by VALUs.
To avoid excessive search when compile time is priority implement
secondary mode where all SALU writes are mitigated.
Co-authored-by: Shilei Tian <shilei.tian@amd.com>
They are no longer needed after the patch: [AMDGPU] Remove wavefrontsize
feature from GFX10: https://github.com/llvm/llvm-project/pull/98400
The exception is when "target-features" are set to "+wavefrontsize32" or
"+wavefrontsize64", we still need to remove a wavefrontsize feature
before add a different one to make sure only one of them are present.
For targets that support xnack replay feature (gfx8+), the
multi-dword scalar loads shouldn't clobber any register that
holds the src address. The constrained version of the scalar
loads have the early clobber flag attached to the dst operand
to restrict RA from re-allocating any of the src regs for its
dst operand.
This reverts commit adaff46d087799072438dd744b038e6fd50a2d78.
Drop the -O3 checks from default-attributes.hip. I don't know why they
are different on some bots but reverting this is far too disruptive.
Removing it from the codegen pipeline induces a lot of test churn
because llc is no longer optimizing out implicit arguments to kernels.
Mostly mechanical, but there are some creative test updates. I preferred
to take the changes as-is in tests where the ABI isn't relevant. In
cases where it's more relevant, or the optimize out logic was too
ingrained in the test, I pre-run the optimization. Some cases manually
add attributes to disable inputs.
Update SIMemoryLegalizer and SIInsertWaitcnts to use separate wait
instructions per counter (e.g. S_WAIT_LOADCNT) and split VMCNT into
separate LOADCNT, SAMPLECNT and BVHCNT counters.
Similar to 806761a7629df268c8aed49657aeccffa6bca449.
For IR files without a target triple, -mtriple= specifies the full
target triple while -march= merely sets the architecture part of the
default target triple, leaving a target triple which may not make sense,
e.g. amdgpu-apple-darwin.
Therefore, -march= is error-prone and not recommended for tests without
a target triple. The issue has been benign as we recognize
$unknown-apple-darwin as ELF instead of rejecting it outrightly.
This patch changes AMDGPU tests to not rely on the default
OS/environment components. Tests that need fixes are not changed:
```
LLVM :: CodeGen/AMDGPU/fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fabs.ll
LLVM :: CodeGen/AMDGPU/floor.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.ll
LLVM :: CodeGen/AMDGPU/r600-infinite-loop-bug-while-reorganizing-vector.ll
LLVM :: CodeGen/AMDGPU/schedule-if-2.ll
```
