When compiling with `-march=armv9-a+nosve` we found that Clang still
defines the `__ARM_FEATURE_SVE2` macro, which is explicitly set in
`setArchFeatures` when compiling for armv9-a.
After some experimenting, I found out that the list of features passed
into `AArch64TargetInfo::handleTargetFeatures` has already been expanded
and takes into account `+no[feature]` and has already expanded features
like `armv9-a`.
From that I conclude that `setArchFeatures` is no longer required.
In #130623 support was added for `+nosimd` in the clang driver.
Following this PR, it was discovered that, if NEON is disabled in the
command line, it did not disable features that depend on this, such as
Crypto or AES. To achieve this, This PR does the following:
- Ensure that disabling NEON (e.g., via +nosimd) also disables dependent
features like Crypto and AES.
- Update the driver to automatically enable NEON when enabling features
that require it (e.g., AES).
This fixes inconsistent behavior where features relying on NEON could be
enabled without NEON itself being active, or where disabling NEON left
dependent features incorrectly enabled.
`+simd` and `+nosimd` are used to enable or disable NEON Instructions
when compiling for ARM Targets. However, up until now, using these
has not been possible. To enable this, these options are mapped to the
relevant LLVM backend option (`+neon` and `-neon`) so it can be both
enabled and disabled successfully by the user.
Tests have been added to ensure this behaviour is maintained in the
future, along with updates to existing tests as behaviour has now changed
relating to the use of `+simd` and `+nosimd`.
As `simd` has been mapped within the ARMTargetParser.def, support for
this extension is also added for the `--print-support-extensions` command
when the target is AArch32. This will print the `simd` option, along with the
description that relates to the Neon feature. This previously was not
possible as `simd` did not have a related Feature or Negative Feature.
To make this functional as intended, MVE and MVE.FP now rely on their
own Enum identifier, rather than `AEK_SIMD`. While SIMD does refer to
both Neon and Helium technologies, in terms of command line options,
SIMD relates to Neon. Helium relates to MVE and MVE.FP. The Enum
now reflects this too.
Previously, when selecting a Single Precision FPU, LLVM would ensure all
elements of the Candidate FPU matched the InputFPU that was given.
However, for cases such as Cortex-R52, there are FPU options where not
all fields match exactly, for example NEON Support or Restrictions on
the Registers available.
This change ensures that LLVM can select the FPU correctly, removing the
requirement for Neon Support and Restrictions for the Candidate FPU to
be the same as the InputFPU.
Upstream LLVM implicitly enables NEON for any ARMv7 target.
Many platform ABIs with an ARMv7 baseline also include NEON in that,
this is the case on e.g. Windows and iOS. On Linux, however, things are
not quite as clearly defined. Some distributions target an ARMv7
baseline without NEON available (this is the case for e.g. Debian/Ubuntu
for the "armhf" architecture).
To achieve this, Debian/Ubuntu patch LLVM downstream to make ARMv7 only
implicitly enable VPFv3-D16, not NEON - see [1].
That patch has the (unintended) effect that NEON no longer is available
by default for Windows/ARMv7 and iOS/ARMv7.
In practice, when compiling C for Windows/ARMv7 with Debian patched
Clang, NEON actually still is available, but not when compiling assembly
files. This is due to ARM::getARMCPUForArch (in
llvm/lib/TargetParser/ARMTargetParser.cpp) returning "cortex-a9" for
Windows. This difference, between C and assembly, is due to how
getARMTargetCPU is called in getARMTargetFeatures (in
clang/lib/Driver/ToolChains/Arch/ARM.cpp) to get defaults, only when
ForAS is not set - see [2].
There is an existing case in getARMTargetFeatures, for Android, which
explicitly enables NEON when targeting ARM >= v7. As Windows and iOS
have NEON as part of their ABI baseline just like Android does these
days (see [3] for where this default was added for Android), add the
implicit default in a similar way.
However, first do the general lookup of getARMTargetCPU (unless ForAS);
this makes sure that we get the same default CPU as before ("cortex-a9"
for Windows and "swift" for the "armv7s" architecture on Darwin).
[1] https://salsa.debian.org/pkg-llvm-team/llvm-toolchain/-/blob/19/debian/patches/clang-arm-default-vfp3-on-armv7a.patch?ref_type=heads
[2] b8baa2a913
[3] d0fbef9c75
This was [addressed for AArch64
here](https://github.com/llvm/llvm-project/pull/79004), but the same
applies to ARM.
Move the enablement of neon+fp64 to `-mcpu=cortex-r52`, which optionally
supports these features.
This reverts commit 89c1bf1230e011f2f0e43554c278205fa1819de5.
This has been unimplemenented for a while, and GCC does not implement
it, therefore we need to consider whether we should just deprecate it
in the ACLE instead.
This patch changes how the macro __ARM_ARCH is defined to match its
defintion in the ACLE. In ACLE 5.4.1, __ARM_ARCH is defined as equal to
the major architecture version for ISAs up to and including v8. From
v8.1 onwards, its definition is changed to include minor versions, such
that for an architecture vX.Y, __ARM_ARCH = X*100 + Y. Before this
patch, LLVM defined __ARM_ARCH using only the major architecture version
for all architecture versions. This patch adds functionality to define
__ARM_ARCH correctly for architectures greater than or equal to v8.1.
Summary:
This patch adds checks that were missing in clang for Armv8.5/6/7-A. These include:
* ACLE macro defines for AArch32.
* Handling of crypto and SM4, SHA and AES feature flags on clang's driver.
Reviewers: dmgreen, SjoerdMeijer, tmatheson
Differential Revision: https://reviews.llvm.org/D116153
This patch introduces support for targetting the Armv9.3-A architecture,
which should map to the existing Armv8.8-A extensions.
Differential Revision: https://reviews.llvm.org/D116159
This is the first commit in a series that implements support for
"armv8.8-a" architecture. This should contain all the necessary
boilerplate to make the 8.8-A architecture exist from LLVM and Clang's
point of view: it adds the new arch as a subtarget feature, a definition
in TargetParser, a name on the command line, an appropriate set of
predefined macros, and adds appropriate tests. The new architecture name
is supported in both AArch32 and AArch64.
However, in this commit, no actual _functionality_ is added as part of
the new architecture. If you specify -march=armv8.8a, the compiler
will accept it and set the right predefines, but generate no code any
differently.
Differential Revision: https://reviews.llvm.org/D115694
armv9-a, armv9.1-a and armv9.2-a can be targeted using the -march option
both in ARM and AArch64.
- Armv9-A maps to Armv8.5-A.
- Armv9.1-A maps to Armv8.6-A.
- Armv9.2-A maps to Armv8.7-A.
- The SVE2 extension is enabled by default on these architectures.
- The cryptographic extensions are disabled by default on these
architectures.
The Armv9-A architecture is described in the Arm® Architecture Reference
Manual Supplement Armv9, for Armv9-A architecture profile
(https://developer.arm.com/documentation/ddi0608/latest).
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D109517
This patch changes the AArch32 crypto instructions (sha2 and aes) to
require the specific sha2 or aes features. These features have
already been implemented and can be controlled through the command
line, but do not have the expected result (i.e. `+noaes` will not
disable aes instructions). The crypto feature retains its existing
meaning of both sha2 and aes.
Several small changes are included due to the knock-on effect this has:
- The AArch32 driver has been modified to ensure sha2/aes is correctly
set based on arch/cpu/fpu selection and feature ordering.
- Crypto extensions are permitted for AArch32 v8-R profile, but not
enabled by default.
- ACLE feature macros have been updated with the fine grained crypto
algorithms. These are also used by AArch64.
- Various tests updated due to the change in feature lists and macros.
Reviewed By: lenary
Differential Revision: https://reviews.llvm.org/D99079
Clang only defines __VFP_FP__ when the FPU is enabled. However, gcc
defines it unconditionally.
This patch aligns Clang with gcc.
Reviewed By: peter.smith, rengolin
Differential Revision: https://reviews.llvm.org/D100372
This extends the command-line support for the 'armv8.7-a' architecture
name to the ARM target.
Based on a patch written by Momchil Velikov.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D93231
Summary:
This patch introduces command-line support for the Armv8.6-a architecture and assembly support for BFloat16. Details can be found
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
in addition to the GCC patch for the 8..6-a CLI:
https://gcc.gnu.org/legacy-ml/gcc-patches/2019-11/msg02647.html
In detail this patch
- march options for armv8.6-a
- BFloat16 assembly
This is part of a patch series, starting with command-line and Bfloat16
assembly support. The subsequent patches will upstream intrinsics
support for BFloat16, followed by Matrix Multiplication and the
remaining Virtualization features of the armv8.6-a architecture.
Based on work by:
- labrinea
- MarkMurrayARM
- Luke Cheeseman
- Javed Asbar
- Mikhail Maltsev
- Luke Geeson
Reviewers: SjoerdMeijer, craig.topper, rjmccall, jfb, LukeGeeson
Reviewed By: SjoerdMeijer
Subscribers: stuij, kristof.beyls, hiraditya, dexonsmith, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D76062
Summary:
This patch implements feature test macros for the CDE extension
according to the upcoming ACLE specification.
The following 2 macros are being added:
- __ARM_FEATURE_CDE - defined as '1' when any coprocessor is
configured as a CDE coprocessor
- __ARM_FEATURE_CDE_COPROC - defined as an 8-bit mask, each bit of the
mask corresponds to a coprocessor and is set when the corresponding
coprocessor is configured as CDE (and cleared otherwise).
The patch also exposes the value of __ARM_FEATURE_CDE_COPROC in the
target-independent method TargetInfo::getARMCDECorpocMask, the method
will be used in follow-up patches implementing semantic checks of CDE
intrinsics (we want to diagnose the cases when CDE intrinsics are used
with coprocessors that are not configured as CDE).
Reviewers: simon_tatham, dmgreen, ostannard, MarkMurrayARM
Reviewed By: simon_tatham
Subscribers: kristof.beyls, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75843
This patch upstreams support for the ARM Armv8.1m cpu Cortex-M55.
In detail adding support for:
- mcpu option in clang
- Arm Target Features in clang
- llvm Arm TargetParser definitions
details of the CPU can be found here:
https://developer.arm.com/ip-products/processors/cortex-m/cortex-m55
Reviewers: chill
Reviewed By: chill
Subscribers: dmgreen, kristof.beyls, hiraditya, cfe-commits,
llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74966
-march=armv8.1-m.main+mve.fp+nomve -mfpu=none should disable FP
registers and instructions moving to/from FP registers.
This patch fixes the case when "+mve" (added to the feature list by
"+mve.fp"), is followed by "-mve" (added by "+nomve").
Differential Revision: https://reviews.llvm.org/D72633
Teaches ARM::appendArchExtFeatures to account dependencies when processing
target features: i.e. when you say -march=armv8.1-m.main+mve.fp+nofp it
means mve.fp should get discarded too. (Split from D63936)
Differential Revision: https://reviews.llvm.org/D64048
llvm-svn: 366031
If MVE is present at all, then the macro __ARM_FEATURE_MVE is defined
to a value which has bit 0 set for integer MVE, and bit 1 set for
floating-point MVE.
(Floating-point MVE implies integer MVE, so if this macro is defined
at all then it will be set to 1 or 3, never 2.)
Patch mostly by Simon Tatham
Differential Revision: https://reviews.llvm.org/D60710
llvm-svn: 362806
Change D60691 caused some knock-on failures that weren't caught by the
existing tests. Firstly, selecting a CPU that should have had a
restricted FPU (e.g. `-mcpu=cortex-m4`, which should have 16 d-regs
and no double precision) could give the unrestricted version, because
`ARM::getFPUFeatures` returned a list of features including subtracted
ones (here `-fp64`,`-d32`), but `ARMTargetInfo::initFeatureMap` threw
away all the ones that didn't start with `+`. Secondly, the
preprocessor macros didn't reliably match the actual compilation
settings: for example, `-mfpu=softvfp` could still set `__ARM_FP` as
if hardware FP was available, because the list of features on the cc1
command line would include things like `+vfp4`,`-vfp4d16` and clang
didn't realise that one of those cancelled out the other.
I've fixed both of these issues by rewriting `ARM::getFPUFeatures` so
that it returns a list that enables every FP-related feature
compatible with the selected FPU and disables every feature not
compatible, which is more verbose but means clang doesn't have to
understand the dependency relationships between the backend features.
Meanwhile, `ARMTargetInfo::handleTargetFeatures` is testing for all
the various forms of the FP feature names, so that it won't miss cases
where it should have set `HW_FP` to feed into feature test macros.
That in turn caused an ordering problem when handling `-mcpu=foo+bar`
together with `-mfpu=something_that_turns_off_bar`. To fix that, I've
arranged that the `+bar` suffixes on the end of `-mcpu` and `-march`
cause feature names to be put into a separate vector which is
concatenated after the output of `getFPUFeatures`.
Another side effect of all this is to fix a bug where `clang -target
armv8-eabi` by itself would fail to set `__ARM_FEATURE_FMA`, even
though `armv8` (aka Arm v8-A) implies FP-Armv8 which has FMA. That was
because `HW_FP` was being set to a value including only the `FPARMV8`
bit, but that feature test macro was testing only the `VFP4FPU` bit.
Now `HW_FP` ends up with all the bits set, so it gives the right
answer.
Changes to tests included in this patch:
* `arm-target-features.c`: I had to change basically all the expected
results. (The Cortex-M4 test in there should function as a
regression test for the accidental double-precision bug.)
* `arm-mfpu.c`, `armv8.1m.main.c`: switched to using `CHECK-DAG`
everywhere so that those tests are no longer sensitive to the order
of cc1 feature options on the command line.
* `arm-acle-6.5.c`: been updated to expect the right answer to that
FMA test.
* `Preprocessor/arm-target-features.c`: added a regression test for
the `mfpu=softvfp` issue.
Reviewers: SjoerdMeijer, dmgreen, ostannard, samparker, JamesNagurne
Reviewed By: ostannard
Subscribers: srhines, javed.absar, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62998
llvm-svn: 362791
Defines macro ARM_FEATURE_CMSE to 1 for v8-M targets and introduces
-mcmse option which for v8-M targets sets ARM_FEATURE_CMSE to 3.
A diagnostic is produced when the option is given on architectures
without support for Security Extensions.
Reviewed By: dmgreen, snidertm
Differential Revision: https://reviews.llvm.org/D59879
llvm-svn: 361261
This patch allows targetting Armv8.5-A from Clang. Most of the
implementation is in TargetParser, so this is mostly just adding tests.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52491
llvm-svn: 343111
Armv8.4-A adds a few FP16 instructions that can optionally be implemented
in CPUs of Armv8.2-A and above.
This patch adds a feature to clang to permit selection of these
instructions. This interacts with the +fp16 option as follows:
Prior to Armv8.4-A:
*) +fp16fml implies +fp16
*) +nofp16 implies +nofp16fml
From Armv8.4-A:
*) The above conditions apply, additionally: +fp16 implies +fp16fml
Patch by Bernard Ogden.
Differential Revision: https://reviews.llvm.org/D50229
llvm-svn: 342862
This adds a pre-defined macro to test if the compiler has support for the
v8.2-A dot rpoduct intrinsics in AArch32 mode.
The AAcrh64 equivalent has already been added by rL330229.
The ACLE spec which describes this macro hasn't been published yet, but this is
based on the final internal draft, and GCC has already implemented this.
Differential revision: https://reviews.llvm.org/D46108
llvm-svn: 331038
This is a partial recommit of r327189 that was reverted
due to test issues. I.e., this recommits minimal functional
change, the FP16 feature test macros, and adds tests that
were missing in the original commit.
llvm-svn: 327455
To be compatible with GCC if soft floating point is in effect any FPU
specified is effectively ignored, eg,
-mfloat-abi=soft -fpu=neon
If any floating point features which require FPU hardware are enabled
they must be disable.
There was some support for doing this for NEON, but it did not handle
VFP, nor did it prevent the backend from emitting the build attribute
Tag_FP_arch describing the generated code as using the floating point
hardware if a FPU was specified (even though soft float does not use
the FPU).
Disabling the hardware floating point features for targets which are
compiling for soft float has meant that some tests which were incorrectly
checking for hardware support also needed to be updated. In such cases,
where appropriate the tests have been updated to check compiling for
soft float and a non-soft float variant (usually softfp). This was
usually because the target specified in the test defaulted to soft float.
Differential Revision: https://reviews.llvm.org/D42569
llvm-svn: 325492
To be compatible with GCC if soft floating point is in effect any FPU
specified is effectively ignored, eg,
-mfloat-abi=soft -fpu=neon
If any floating point features which require FPU hardware are enabled
they must be disable.
There was some support for doing this for NEON, but it did not handle
VFP, nor did it prevent the backend from emitting the build attribute
Tag_FP_arch describing the generated code as using the floating point
hardware if a FPU was specified (even though soft float does not use
the FPU).
Disabling the hardware floating point features for targets which are
compiling for soft float has meant that some tests which were incorrectly
checking for hardware support also needed to be updated. In such cases,
where appropriate the tests have been updated to check compiling for
soft float and a non-soft float variant (usually softfp). This was
usually because the target specified in the test defaulted to soft float.
Differential Revision: https://reviews.llvm.org/D40256
llvm-svn: 319420
This is a re-apply of r319294.
adds -fseh-exceptions and -fdwarf-exceptions flags
clang will check if the user has specified an exception model flag,
in the absense of specifying the exception model clang will then check
the driver default and append the model flag for that target to cc1
-fno-exceptions has a higher priority then specifying the model
move __SEH__ macro definitions out of Targets into InitPreprocessor
behind the -fseh-exceptions flag
move __ARM_DWARF_EH__ macrodefinitions out of verious targets and into
InitPreprocessor behind the -fdwarf-exceptions flag and arm|thumb check
remove unused USESEHExceptions from the MinGW Driver
fold USESjLjExceptions into a new GetExceptionModel function that
gives the toolchain classes more flexibility with eh models
Reviewers: rnk, mstorsjo
Differential Revision: https://reviews.llvm.org/D39673
llvm-svn: 319297
adds -fseh-exceptions and -fdwarf-exceptions flags
clang will check if the user has specified an exception model flag,
in the absense of specifying the exception model clang will then check
the driver default and append the model flag for that target to cc1
clang cc1 assumes dwarf is the default if none is passed
and -fno-exceptions has a higher priority then specifying the model
move __SEH__ macro definitions out of Targets into InitPreprocessor
behind the -fseh-exceptions flag
move __ARM_DWARF_EH__ macrodefinitions out of verious targets and into
InitPreprocessor behind the -fdwarf-exceptions flag and arm|thumb check
remove unused USESEHExceptions from the MinGW Driver
fold USESjLjExceptions into a new GetExceptionModel function that
gives the toolchain classes more flexibility with eh models
Reviewers: rnk, mstorsjo
Differential Revision: https://reviews.llvm.org/D39673
llvm-svn: 319294
This introduces helper functions that set target defines for different ARMV8-A
architecture kinds. It fixes an issue that the v8.1 define ARM_FEATURE_QRDMX
was not set for v8.2. These helper functions make things more “scalable” if we
want to add ARMv8.3 at some point, and a cleanup has been done to hold the
architecture kind in one variable (instead of one for each).
Differential Revision: https://reviews.llvm.org/D34686
llvm-svn: 306805
