The exit code for -### is inconsistent. Unrecognized options lead to
exit code 1, as expected. However, most others errors (including invalid
option value) lead to exit code 0, differing from GCC and most utilities.
This is a longstanding quirk of -###, and we didn't fix it because many
driver tests need adjustment.
Change -### to be similar to -fdriver-only -v and exit with code 1.
This requires fixing many driver tests, but the end result gives us
stronger tests.
* Existing `RUN: %clang -### ...` tests usually don't use `CHECK-NOT: error:` or `--implicit-check-not=error:`.
If a change introduces an error, such a change usually cannot be detected.
* Many folks contributing new tests don't know `-fdriver-only -v`.
To test no driver error/warning for new tests, they can use the familiar `-### -Werror`
instead of `-fdriver-only -v -Werror`.
An incomplete list of prerequisite test improvement:
* 2f79bb10461d114783a1548201928549ace09755: add -nogpulib to some AMDGPU tests
* 9155e517e6e1cda474d0d0fa82f71696c325bc10: add --cuda-path= (test w/ and w/o /usr/local/cuda)
* 80765ede5bbcca1364c2d4ae06127011eaba6389: -mcpu=native may return either 0 or 1, depending on whether `--target=` specifies a native target
* abae53f43f0d1da8d8e421f4a628d7ec64d6e365: fix -fuse-ld=lld misuses (test w/o and w/o /usr/local/bin/ld.lld)
* ab68df505e5bb8808ee44f53044b50ca7575098e: add -resource-dir= and -fvisibility=hidden
to some -fsanitize=cfi tests
* d5ca1602f64114f612ad5630f04e4aa90591c78d: --rtlib=platform without --unwindlib= may fail if CLANG_DEFAULT_UNWINDLIB=unwindlib
Reviewed By: jhuber6, yaxunl, dblaikie
Differential Revision: https://reviews.llvm.org/D156363
The exit code for -### is inconsistent. Unrecognized options lead to
exit code 1, as expected. However, most others errors (including invalid
option value) lead to exit code 0, differing from GCC and most utilities.
This is a longstanding quirk of -###, and we didn't fix it because many
driver tests need adjustment.
Change -### to be similar to -fdriver-only -v and exit with code 1.
This requires fixing many driver tests, but the end result gives us
stronger tests.
* Existing `RUN: %clang -### ...` tests usually don't use `CHECK-NOT: error:` or `--implicit-check-not=error:`.
If a change introduces an error, such a change usually cannot be detected.
* Many folks contributing new tests don't know `-fdriver-only -v`.
To test no driver error/warning for new tests, they can use the familiar `-### -Werror`
instead of `-fdriver-only -v -Werror`.
An incomplete list of prerequisite test improvement:
* 2f79bb10461d114783a1548201928549ace09755: add -nogpulib to some AMDGPU tests
* 9155e517e6e1cda474d0d0fa82f71696c325bc10: add --cuda-path= (test w/ and w/o /usr/local/cuda)
* 80765ede5bbcca1364c2d4ae06127011eaba6389: -mcpu=native may return either 0 or 1, depending on whether `--target=` specifies a native target
* abae53f43f0d1da8d8e421f4a628d7ec64d6e365: fix -fuse-ld=lld misuses (test w/o and w/o /usr/local/bin/ld.lld)
Reviewed By: jhuber6, yaxunl, dblaikie
Differential Revision: https://reviews.llvm.org/D156363
If program paths (GCC installation, --sysroot, -B, etc) don't contain
ld.lld, whether -fuse-ld=lld succeeds depends on whether a PATH
directory contains ld.lld.
> error: invalid linker name in argument '-fuse-ld=lld'
This behavior is not suitable when we adopt the new strict behavior of
-### in D156363.
For some tests, append -B%S/Inputs/lld similar to D92028.
For others, use -fuse-ld=ld so that getDefaultLinker (instead of CLANG_DEFAULT_LINKER) is used. The complexity stems from CLANG_DEFAULT_LINKER.
This reverts commit e39bf32b3bc2f0cc21d783ba789bd82553493875.
Some tests have different behaviors depent on whether certain directories/files are present on the host.
An incomplete list from https://lab.llvm.org/buildbot/#/builders/109/builds/70149
csky-toolchain.c
riscv*-toolchain.c
fuchsia.*
hip-*
ohos.c
The exit code for -### is inconsistent. Unrecognized options lead to
exit code 1, as expected. However, most others errors (including invalid
option value) lead to exit code 0, differing from GCC and most utilities.
This is a longstanding quirk of -###, and we didn't fix it because many
driver tests need adjustment.
Change -### to be similar to -fdriver-only -v and exit with code 1.
This requires fixing many driver tests, but the end result gives us
stronger tests.
* Existing `RUN: %clang -### ...` tests usually don't use `CHECK-NOT: error:` or `--implicit-check-not=error:`.
If a change introduces an error, such a change usually cannot be detected.
* Many folks contributing new tests don't know `-fdriver-only -v`.
To test no driver error/warning for new tests, they can use the familiar `-### -Werror`
instead of `-fdriver-only -v -Werror`.
Reviewed By: jhuber6, yaxunl, dblaikie
Differential Revision: https://reviews.llvm.org/D156363
This will enable layering multilibs on top of each other.
For example a multilib containing only a no-exceptions libc++ could be
layered on top of a multilib containing C libs. This avoids the need
to duplicate the C library for every libc++ variant.
This change doesn't expose the functionality externally, it only opens
the functionality up to be potentially used by ToolChain classes.
Differential Revision: https://reviews.llvm.org/D143059
{x86_64,aarch64}-unknown-fuchsia and {x86_64,aarch64}-fuchsia should
behave identically as targets, update the test to make sure that's the
case.
Differential Revision: https://reviews.llvm.org/D110687
This reverts commit 03142c5f67788bcc1573f76732d0fccd75c6b965.
Breaks check-asan if system ld doesn't support --push-state, even
if lld was built and is used according to lit's output.
See comments on https://reviews.llvm.org/D110128
When statically linking C++ standard library, we shouldn't add -Bdynamic
after including the library on the link line because that might override
user settings like -static and -static-pie. Rather, we should surround
the library with --push-state/--pop-state to make sure that -Bstatic
only applies to C++ standard library and nothing else. This has been
supported since GNU ld 2.25 (2014) so backwards compatibility should
no longer be a concern.
Differential Revision: https://reviews.llvm.org/D110128
This reverts commit 5e28c892d06f95600f8b6290ad4de38bfe142637 as
the linker on the clang-ppc64le-rhel bot doesn't seem to support
--push-state/--pop-state.
When statically linking C++ standard library, we shouldn't add -Bdynamic
after including the library on the link line because that might override
user settings like -static and -static-pie. Rather, we should surround
the library with --push-state/--pop-state to make sure that -Bstatic
only applies to C++ standard library and nothing else. This has been
supported since GNU ld 2.25 (2014) so backwards compatibility should
no longer be a concern.
Differential Revision: https://reviews.llvm.org/D110128
These are GCC-compatible multilibs that use the generic Itanium C++ ABI
instead of the Fuchsia C++ ABI.
Differential Revision: https://reviews.llvm.org/D102030
When using the per-target runtime build, it may be desirable to have
different __config_site headers for each target where all targets cannot
share a single configuration.
The layout used for libc++ headers after this change is:
```
include/
c++/
v1/
<libc++ headers except for __config_site>
<target1>/
c++/
v1/
__config_site
<target2>/
c++/
v1/
__config_site
<other targets>
```
This is the most optimal layout since it avoids duplication, the only
headers that's per-target is __config_site, all other headers are
shared across targets. This also means that we no need two
-isystem flags: one for the target-agnostic headers and one for
the target specific headers.
Differential Revision: https://reviews.llvm.org/D89013
This is a partial revert of b4537c3f51bc6c011ddd9c10b80043ac4ce16a01
based on the discussion in https://reviews.llvm.org/D101194. Rather
than using the getMultiarchTriple, we use the getTripleString.
The new layout more closely matches the layout used by other compilers.
This is only used when LLVM_ENABLE_PER_TARGET_RUNTIME_DIR is enabled.
Differential Revision: https://reviews.llvm.org/D100869
These contain clang driver changes for supporting HWASan on Fuchsia.
This includes hwasan multilibs and the dylib path change.
Differential Revision: https://reviews.llvm.org/D99361
We're choosing to take an opt-in approach for landing Relative VTables, so we'll
need asan-equivalent multilibs with relative vtables enabled. Afterwards, we can
just flip the switch in our build.
Differential Revision: https://reviews.llvm.org/D95253
This adds multilibs for Fuchsia that is built with the relative vtables ABI,
one with and another without exceptions.
Differential Revision: https://reviews.llvm.org/D85576
Very few ELF platforms still use .ctors/.dtors now. Linux (glibc: 1999-07),
DragonFlyBSD, FreeBSD (2012-03) and Solaris have supported .init_array
for many years. Some architectures like AArch64/RISC-V default to
.init_array . GNU ld and gold can even convert .ctors to .init_array .
It makes more sense to flip the CC1 default, and only uses
-fno-use-init-array on platforms that don't support .init_array .
For example, OpenBSD did not support DT_INIT_ARRAY before Aug 2016
(86fa57a279)
I may miss some ELF platforms that still use .ctors, but their
maintainers can easily diagnose such problems.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D71393
We don't have a full sysroot yet, so for now we only include compiler
support and compiler-rt builtins, the rest of the runtimes will get
enabled later.
Differential Revision: https://reviews.llvm.org/D70477
Using noexcept multilib with -fno-exceptions can lead to significant
space savings when statically linking libc++abi because we don't need
all the unwinding and demangling code.
When compiling with ASan, we already get a lot of overhead from the
instrumentation itself, when statically linking libc++abi, that overhead
is even larger.
Having the noexcept variant for ASan can help significantly, we've seen
more than 50% size reduction in our system image, which offsets the cost
of having to build another multilib.
Differential Revision: https://reviews.llvm.org/D64140
llvm-svn: 365994
This is a follow up to r361432, changing the layout of per-target
runtimes to more closely resemble multiarch. While before, we used
the following layout:
[RESOURCE_DIR]/<target>/lib/libclang_rt.<runtime>.<ext>
Now we use the following layout:
[RESOURCE_DIR]/lib/<target>/libclang_rt.<runtime>.<ext>
This also more closely resembles the existing "non-per-target" layout:
[RESOURCE_DIR]/lib/<os>/libclang_rt.<runtime>-<arch>.<ext>
This change will enable further simplification of the driver logic
in follow up changes.
Differential Revision: https://reviews.llvm.org/D62469
llvm-svn: 361784
This is a follow up to r361432 and r361504 which addresses issues
introduced by those changes. Specifically, it avoids duplicating
file and runtime paths in case when the effective triple is the
same as the cannonical one. Furthermore, it fixes the broken multilib
setup in the Fuchsia driver and deduplicates some of the code.
Differential Revision: https://reviews.llvm.org/D62442
llvm-svn: 361709
This introduces a support for multilibs to Fuchsia driver. Unlike the
existing multilibs that are used primarily for handling different
architecture variants, we use multilibs to handle different variants
of Clang runtime libraries: -fsanitize=address and -fno-exceptions
are the two we support initially. This replaces the existing support
for sanitized runtimes libraries that was only used by Fuchsia driver
and it also refactors some of the logic to allow sharing between GNU
and Fuchsia drivers.
Differential Revision: https://reviews.llvm.org/D61040
llvm-svn: 359360
This can be used to disable libc linking. This flag is supported by
GCC since version 9 as well as some Clang target toolchains. This
change also includes tests for all -no* flags which previously weren't
covered.
Differential Revision: https://reviews.llvm.org/D58325
llvm-svn: 354208
-static relies on lld's behavior, but -Bstatic/dynamic is supported
across all linkers.
Differential Revision: https://reviews.llvm.org/D54082
llvm-svn: 346107
This makes the tests stricter by not only matching the runtime file
name, but the entire path into the resource directory.
Differential Revision: https://reviews.llvm.org/D54064
llvm-svn: 346088
This avoids introducing unnecessary DT_NEEDED entries when using
C++ driver for linking C code or C++ code that doesn't use C++
standard library.
Differential Revision: https://reviews.llvm.org/D53854
llvm-svn: 346064
The Fuchsia driver relies on lld so invoke clang with
-fuse-ld=lld. This gets the test passing when the clang default linker
is something other than lld.
Differential Revision: https://reviews.llvm.org/D49899
llvm-svn: 339036
This change adds a support for multiarch style runtimes layout, so in
addition to the existing layout where runtimes get installed to:
lib/clang/$version/lib/$os
Clang now allows runtimes to be installed to:
lib/clang/$version/$target/lib
This also includes libc++, libc++abi and libunwind; today those are
assumed to be in Clang library directory built for host, with the
new layout it is possible to install libc++, libc++abi and libunwind
into the runtime directory built for different targets.
The use of new layout is enabled by setting the
LLVM_ENABLE_RUNTIME_TARGET_DIR CMake variable and is supported by both
projects and runtimes layouts. The runtimes CMake build has been further
modified to use the new layout when building runtimes for multiple
targets.
Differential Revision: https://reviews.llvm.org/D45604
llvm-svn: 335809
The fact that libc++ depends on libc++abi and libunwind is an internal
detail that's captured by the libc++.so linker script.
Differential Revision: https://reviews.llvm.org/D46768
llvm-svn: 332138
Passing a flavor to LLD requires command line argument, but if these
are being passed through a response file, this will fail because LLD
needs to know which driver to use before processing the response file.
Use ld.lld directly instead to avoid this issue.
Differential Revision: https://reviews.llvm.org/D39176
llvm-svn: 316379
Several improvements to the Fuchsia driver:
* Search for C++ library headers and libraries in directories that
are part of the toolchain distribution rather than sysroot.
* Use LLVM support utlities to construct paths to make sure the driver
is also usable on Windows for cross-compiling.
* Change the driver to inherit directly from ToolChain rather than
Generic_GCC since we don't need any of the GCC related multilib logic.
Differential Revision: https://reviews.llvm.org/D35328
llvm-svn: 307856
Several improvements to the Fuchsia driver:
* Search for C++ library headers and libraries in directories that
are part of the toolchain distribution rather than sysroot.
* Use LLVM support utlities to construct paths to make sure the driver
is also usable on Windows for cross-compiling.
* Change the driver to inherit directly from ToolChain rather than
Generic_GCC since we don't need any of the GCC related multilib logic.
Differential Revision: https://reviews.llvm.org/D32613
llvm-svn: 307830
