Allow to have a name for workers in case the fuzzed code is itself using threads.
Reviewers: vitalybuka
Reviewed-By: vitalybuka
Differential Revision: https://reviews.llvm.org/D155754
Don't hard code the page in FuzzerUtil.h, this breaks on
e.g. LoongArch which defaults to a 16KiB page size.
Reviewed By: #sanitizers, vitalybuka
Differential Revision: https://reviews.llvm.org/D140607
This reverts commit a2b677e8153758997a9043360cf51333eecc3c44.
reverting
Differential Revision: https://reviews.llvm.org/D140607
because <sys/auxv.h> and getauxval() are not available on macOS;
this change is breaking the mac CI bots.
Don't hard code the page in FuzzerUtil.h, this breaks on
e.g. LoongArch which defaults to a 16KiB page size.
Reviewed By: #sanitizers, vitalybuka
Differential Revision: https://reviews.llvm.org/D140607
This change introduces libMutagen/libclang_rt.mutagen.a as a subset of libFuzzer/libclang_rt.fuzzer.a. This library contains only the fuzzing strategies used by libFuzzer to produce new test inputs from provided inputs, dictionaries, and SanitizerCoverage feedback.
Most of this change is simply moving sections of code to one side or the other of the library boundary. The only meaningful new code is:
* The Mutagen.h interface and its implementation in Mutagen.cpp.
* The following methods in MutagenDispatcher.cpp:
* UseCmp
* UseMemmem
* SetCustomMutator
* SetCustomCrossOver
* LateInitialize (similar to the MutationDispatcher's original constructor)
* Mutate_AddWordFromTORC (uses callbacks instead of accessing TPC directly)
* StartMutationSequence
* MutationSequence
* DictionaryEntrySequence
* RecommendDictionary
* RecommendDictionaryEntry
* FuzzerMutate.cpp (which now justs sets callbacks and handles printing)
* MutagenUnittest.cpp (which adds tests of Mutagen.h)
A note on performance: This change was tested with a 100 passes of test/fuzzer/LargeTest.cpp with 1000 runs per pass, both with and without the change. The running time distribution was qualitatively similar both with and without the change, and the average difference was within 30 microseconds (2.240 ms/run vs 2.212 ms/run, respectively). Both times were much higher than observed with the fully optimized system clang (~0.38 ms/run), most likely due to the combination of CMake "dev mode" settings (e.g. CMAKE_BUILD_TYPE="Debug", LLVM_ENABLE_LTO=OFF, etc.). The difference between the two versions built similarly seems to be "in the noise" and suggests no meaningful performance degradation.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D102447
This change introduces libMutagen/libclang_rt.mutagen.a as a subset of libFuzzer/libclang_rt.fuzzer.a. This library contains only the fuzzing strategies used by libFuzzer to produce new test inputs from provided inputs, dictionaries, and SanitizerCoverage feedback.
Most of this change is simply moving sections of code to one side or the other of the library boundary. The only meaningful new code is:
* The Mutagen.h interface and its implementation in Mutagen.cpp.
* The following methods in MutagenDispatcher.cpp:
* UseCmp
* UseMemmem
* SetCustomMutator
* SetCustomCrossOver
* LateInitialize (similar to the MutationDispatcher's original constructor)
* Mutate_AddWordFromTORC (uses callbacks instead of accessing TPC directly)
* StartMutationSequence
* MutationSequence
* DictionaryEntrySequence
* RecommendDictionary
* RecommendDictionaryEntry
* FuzzerMutate.cpp (which now justs sets callbacks and handles printing)
* MutagenUnittest.cpp (which adds tests of Mutagen.h)
A note on performance: This change was tested with a 100 passes of test/fuzzer/LargeTest.cpp with 1000 runs per pass, both with and without the change. The running time distribution was qualitatively similar both with and without the change, and the average difference was within 30 microseconds (2.240 ms/run vs 2.212 ms/run, respectively). Both times were much higher than observed with the fully optimized system clang (~0.38 ms/run), most likely due to the combination of CMake "dev mode" settings (e.g. CMAKE_BUILD_TYPE="Debug", LLVM_ENABLE_LTO=OFF, etc.). The difference between the two versions built similarly seems to be "in the noise" and suggests no meaningful performance degradation.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D102447
This change adds a SimpleFastHash64 variant of SimpleFastHash which allows call sites to specify a starting value and get a 64 bit hash in return. This allows a hash to be "resumed" with more data.
A later patch needs this to be able to hash a sequence of module-relative values one at a time, rather than just a region a memory.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D94510
Attempting to build a standalone libFuzzer in Fuchsia's default toolchain for the purpose of cross-compiling the unit tests revealed a number of not-quite-proper type conversions. Fuchsia's toolchain include `-std=c++17` and `-Werror`, among others, leading to many errors like `-Wshorten-64-to-32`, `-Wimplicit-float-conversion`, etc.
Most of these have been addressed by simply making the conversion explicit with a `static_cast`. These typically fell into one of two categories: 1) conversions between types where high precision isn't critical, e.g. the "energy" calculations for `InputInfo`, and 2) conversions where the values will never reach the bits being truncated, e.g. `DftTimeInSeconds` is not going to exceed 136 years.
The major exception to this is the number of features: there are several places that treat features as `size_t`, and others as `uint32_t`. This change makes the decision to cap the features at 32 bits. The maximum value of a feature as produced by `TracePC::CollectFeatures` is roughly:
(NumPCsInPCTables + ValueBitMap::kMapSizeInBits + ExtraCountersBegin() - ExtraCountersEnd() + log2(SIZE_MAX)) * 8
It's conceivable for extremely large targets and/or extra counters that this limit could be reached. This shouldn't break fuzzing, but it will cause certain features to collide and lower the fuzzers overall precision. To address this, this change adds a warning to TracePC::PrintModuleInfo about excessive feature size if it is detected, and recommends refactoring the fuzzer into several smaller ones.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D97992
The usage pattern of Bundle variable assumes the machine is little
endian, which is not the case on SystemZ. Fix by converting Bundle to
little-endian when necessary.
For CleanseCrashInput, discards stdout output anyway since it is not used.
These changes are to defend against aggressive PID recycle on windows to reduce the chance of contention on files.
Using pipe instead of file also workaround the problem that when the
process is spawned by llvm-lit, the aborted process keeps a handle to the
output file such that the output file can not be removed. This will
cause random test failures.
https://devblogs.microsoft.com/oldnewthing/20110107-00/?p=11803
Reviewers: kcc, vitalybuka
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D73329
Summary:
This commit moves the `DiscardOutput` function in FuzzerIO to
FuzzerUtil, so fuchsia can have its own specialized version.
In fuchsia, accessing `/dev/null` is not supported, and there's nothing
similar to a file that discards everything that is written to it. The
way of doing something similar in fuchsia is by using `fdio_null_create`
and binding that to a file descriptor with `fdio_bind_to_fd`.
This change should fix one of the issues with the `-close_fd_mask` flag
in libfuzzer, in which closing stdout was not working due to
`fopen("/dev/null", "w")` returning `NULL`.
Reviewers: kcc, aarongreen
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D69593
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
Replace calls to builtin functions with macros or functions that call the
Windows-equivalents when targeting windows and call the original
builtin functions everywhere else.
This change makes more parts of libFuzzer buildable with MSVC.
Reviewers: vitalybuka
Reviewed By: vitalybuka
Subscribers: mgorny, rnk, thakis
Differential Revision: https://reviews.llvm.org/D56439
llvm-svn: 350766
Summary:
When out-of-memory or timeout occurs, threads can be stopped during
symbolization, thereby causing a deadlock when the OOM/TO handlers
attempt symbolization. We avoid this deadlock by skipping symbolization
if another thread is symbolizing.
Reviewers: kcc
Reviewed By: kcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46605
llvm-svn: 331825
Summary:
To be more portable (especially w.r.t. platforms without system()),
commands should be managed programmatically rather than via string
manipulation on the command line. This change introduces
Fuzzer::Command, with methods to manage arguments and flags, set output
options, and execute the command.
Patch By: aarongreen
Reviewers: kcc, morehouse
Reviewed By: kcc, morehouse
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D40103
llvm-svn: 319680
Resulting library binaries will be named libclang_rt.fuzzer*, and will
be placed in Clang toolchain, allowing redistribution.
Differential Revision: https://reviews.llvm.org/D36908
llvm-svn: 311407
