This PR adds support for parsing the WebAssembly symbol table. The
symbol table is encoded in the "names" section and contains names and
indexes into other sections. For now we only support parsing function
(code) symbols. The result is that you can set breakpoints by symbol
name, while previously breakpoints by name required debug info (DWARF).
This is also necessary for Swift, which checks for the presence of
`swift_release` as a heuristic to determine if there's a static Swift
stdlib.
Different object file formats support DWARF sections (COFF, ELF, MachO,
PE/COFF, WASM). COFF and PE/COFF only matched a subset. This caused some
GCC executables produced on MinGW to have issue later on when debugging.
One example is that `.debug_rnglists` was not matched, which caused
range-extraction to fail when printing a backtrace.
This unifies the parsing of section names in
`ObjectFile::GetDWARFSectionTypeFromName`, so all file formats can use
the same naming convention. Since the prefixes are different,
`GetDWARFSectionTypeFromName` only matches the suffixes (i.e. `.debug_`
needs to be stripped before).
I added two tests to ensure the sections are correctly identified on
Windows executables.
Fix a [test
failure](https://github.com/llvm/llvm-project/pull/136236#issuecomment-2819772879)
in #136236, apply a minor renaming of statistics, and remerge. See
details below.
# Changes in #136236
Currently, `DebuggerStats::ReportStatistics()` calls
`Module::GetSymtab(/*can_create=*/false)`, but then the latter calls
`SymbolFile::GetSymtab()`. This will load symbols if haven't yet. See
stacktrace below.
The problem is that `DebuggerStats::ReportStatistics` should be
read-only. This is especially important because it reports stats for
symtab parsing/indexing time, which could be affected by the reporting
itself if it's not read-only.
This patch fixes this problem by adding an optional parameter
`SymbolFile::GetSymtab(bool can_create = true)` and receiving the
`false` value passed down from `Module::GetSymtab(/*can_create=*/false)`
when the call is initiated from `DebuggerStats::ReportStatistics()`.
---
Notes about the following stacktrace:
1. This can be reproduced. Create a helloworld program on **macOS** with
dSYM, add `settings set target.preload-symbols false` to `~/.lldbinit`,
do `lldb a.out`, then `statistics dump`.
2. `ObjectFile::GetSymtab` has `llvm::call_once`. So the fact that it
called into `ObjectFileMachO::ParseSymtab` means that the symbol table
is actually being parsed.
```
(lldb) bt
* thread #1, queue = 'com.apple.main-thread', stop reason = step over
frame #0: 0x0000000124c4d5a0 LLDB`ObjectFileMachO::ParseSymtab(this=0x0000000111504e40, symtab=0x0000600000a05e00) at ObjectFileMachO.cpp:2259:44
* frame #1: 0x0000000124fc50a0 LLDB`lldb_private::ObjectFile::GetSymtab()::$_0::operator()(this=0x000000016d35c858) const at ObjectFile.cpp:761:9
frame #5: 0x0000000124fc4e68 LLDB`void std::__1::__call_once_proxy[abi:v160006]<std::__1::tuple<lldb_private::ObjectFile::GetSymtab()::$_0&&>>(__vp=0x000000016d35c7f0) at mutex:652:5
frame #6: 0x0000000198afb99c libc++.1.dylib`std::__1::__call_once(unsigned long volatile&, void*, void (*)(void*)) + 196
frame #7: 0x0000000124fc4dd0 LLDB`void std::__1::call_once[abi:v160006]<lldb_private::ObjectFile::GetSymtab()::$_0>(__flag=0x0000600003920080, __func=0x000000016d35c858) at mutex:670:9
frame #8: 0x0000000124fc3cb0 LLDB`void llvm::call_once<lldb_private::ObjectFile::GetSymtab()::$_0>(flag=0x0000600003920080, F=0x000000016d35c858) at Threading.h:88:5
frame #9: 0x0000000124fc2bc4 LLDB`lldb_private::ObjectFile::GetSymtab(this=0x0000000111504e40) at ObjectFile.cpp:755:5
frame #10: 0x0000000124fe0a28 LLDB`lldb_private::SymbolFileCommon::GetSymtab(this=0x0000000104865200) at SymbolFile.cpp:158:39
frame #11: 0x0000000124d8fedc LLDB`lldb_private::Module::GetSymtab(this=0x00000001113041a8, can_create=false) at Module.cpp:1027:21
frame #12: 0x0000000125125bdc LLDB`lldb_private::DebuggerStats::ReportStatistics(debugger=0x000000014284d400, target=0x0000000115808200, options=0x000000014195d6d1) at Statistics.cpp:329:30
frame #13: 0x0000000125672978 LLDB`CommandObjectStatsDump::DoExecute(this=0x000000014195d540, command=0x000000016d35d820, result=0x000000016d35e150) at CommandObjectStats.cpp:144:18
frame #14: 0x0000000124f29b40 LLDB`lldb_private::CommandObjectParsed::Execute(this=0x000000014195d540, args_string="", result=0x000000016d35e150) at CommandObject.cpp:832:9
frame #15: 0x0000000124efbd70 LLDB`lldb_private::CommandInterpreter::HandleCommand(this=0x0000000141b22f30, command_line="statistics dump", lazy_add_to_history=eLazyBoolCalculate, result=0x000000016d35e150, force_repeat_command=false) at CommandInterpreter.cpp:2134:14
frame #16: 0x0000000124f007f4 LLDB`lldb_private::CommandInterpreter::IOHandlerInputComplete(this=0x0000000141b22f30, io_handler=0x00000001419b2aa8, line="statistics dump") at CommandInterpreter.cpp:3251:3
frame #17: 0x0000000124d7b5ec LLDB`lldb_private::IOHandlerEditline::Run(this=0x00000001419b2aa8) at IOHandler.cpp:588:22
frame #18: 0x0000000124d1e8fc LLDB`lldb_private::Debugger::RunIOHandlers(this=0x000000014284d400) at Debugger.cpp:1225:16
frame #19: 0x0000000124f01f74 LLDB`lldb_private::CommandInterpreter::RunCommandInterpreter(this=0x0000000141b22f30, options=0x000000016d35e63c) at CommandInterpreter.cpp:3543:16
frame #20: 0x0000000122840294 LLDB`lldb::SBDebugger::RunCommandInterpreter(this=0x000000016d35ebd8, auto_handle_events=true, spawn_thread=false) at SBDebugger.cpp:1212:42
frame #21: 0x0000000102aa6d28 lldb`Driver::MainLoop(this=0x000000016d35ebb8) at Driver.cpp:621:18
frame #22: 0x0000000102aa75b0 lldb`main(argc=1, argv=0x000000016d35f548) at Driver.cpp:829:26
frame #23: 0x0000000198858274 dyld`start + 2840
```
# Changes in this PR top of the above
Fix a [test
failure](https://github.com/llvm/llvm-project/pull/136236#issuecomment-2819772879)
in `TestStats.py`. The original version of the added test checks that
all modules have symbol count zero when `target.preload-symbols ==
false`. The test failed on macOS. Due to various reasons, on macOS,
symbols can be loaded for dylibs even with that setting, but not for the
main module. For now, the fix of the test is to limit the assertion to
only the main module. The test now passes on macOS. In the future, when
we have a way to control a specific list of plug-ins to be loaded, there
may be a configuration that this test can use to assert that all modules
have symbol count zero.
Apply a minor renaming of statistics, per the
[suggestion](https://github.com/llvm/llvm-project/pull/136226#issuecomment-2825080275)
in #136226 after merge.
This reverts commit d5b40c71f6be972f677de5d9886f91866df007b5.
This change broke greendragon lldb test:
lldb-api :: commands/statistics/basic/TestStats.py
And is therefore being reverted.
Currently, `DebuggerStats::ReportStatistics()` calls
`Module::GetSymtab(/*can_create=*/false)`, but then the latter calls
`SymbolFile::GetSymtab()`. This will load symbols if haven't yet. See
stacktrace below.
The problem is that `DebuggerStats::ReportStatistics` should be
read-only. This is especially important because it reports stats for
symtab parsing/indexing time, which could be affected by the reporting
itself if it's not read-only.
This patch fixes this problem by adding an optional parameter
`SymbolFile::GetSymtab(bool can_create = true)` and receive the `false`
value passed down from `Module::GetSymtab(/*can_create=*/false)` when
the call was initiated from `DebuggerStats::ReportStatistics()`.
Add ObjectFile::GetObjectName and SymbolFile::GetObjectName to retrieve
the name of the object file, including the `.a` for static libraries.
We currently do something similar in CommandObjectTarget, but the code
for dumping this is a lot more involved than what's being offered by the
new method. We have options to print he full path, the base name, and
the directoy of the path and trim it to a specific width.
This is motivated by #133211, where Greg pointed out that the old code
would print the static archive (the .a file) rather than the actual
object file inside of it.
Lots of code around LLDB was directly accessing the target's section
load list. This NFC patch makes the section load list private so the
Target class can access it, but everyone else now uses accessor
functions. This allows us to control the resolving of addresses and will
allow for functionality in LLDB which can lazily resolve addresses in
JIT plug-ins with a future patch.
Compared to the python version, this also does type checking and error
handling, so it's slightly longer, however, it's still comfortably
under 500 lines.
Relanding with more explicit type conversions.
This reverts commit f6012a209dca6b1866d00e6b4f96279469884320.
Revert "[lldb] Add cast to fix compile error on 32-but platforms"
This reverts commit d300337e93da4ed96b044557e4b0a30001967cf0.
Revert "[lldb] Improve log message to include missing strings"
This reverts commit 0be33484853557bc0fd9dfb94e0b6c15dda136ce.
Revert "[lldb] Add comment"
This reverts commit e2bb47443d2e5c022c7851dd6029e3869fc8835c.
Revert "[lldb] Implement a formatter bytecode interpreter in C++"
This reverts commit 9a9c1d4a6155a96ce9be494cec7e25731d36b33e.
Compared to the python version, this also does type checking and error
handling, so it's slightly longer, however, it's still comfortably
under 500 lines.
Add support for type summaries embedded into the binary.
These embedded summaries will typically be generated by Swift macros,
but can also be generated by any other means.
rdar://115184658
This patch improves the ability of a ObjectFileELF instance to read the
.dynamic section. It adds the ability to read the .dynamic section from
the PT_DYNAMIC program header which is useful for ELF files that have no
section headers and for ELF files that are read from memory. It cleans
up the usage of the .dynamic entries so that
ObjectFileELF::ParseDynamicSymbols() is the only code that parses
.dynamic entries, teaches that function the read and store the string
values for each .dynamic entry. We now dump the .dynamic entries in the
output of "image dump objfile". It also cleans up the code that gets the
dynamic string table so that it can grab it from the DT_STRTAB and
DT_STRSZ .dynamic entries for when we have a ELF file with no section
headers or we are reading it from memory.
This patch improves the ability of a ObjectFileELF instance to read the .dynamic section. It adds the ability to read the .dynamic section from the PT_DYNAMIC program header which is useful for ELF files that have no section headers and for ELF files that are read from memory. It cleans up the usage of the .dynamic entries so that ObjectFileELF::ParseDynamicSymbols() is the only code that parses .dynamic entries, teaches that function the read and store the string values for each .dynamic entry. We now dump the .dynamic entries in the output of "image dump objfile". It also cleans up the code that gets the dynamic string table so that it can grab it from the DT_STRTAB and DT_STRSZ .dynamic entries for when we have a ELF file with no section headers or we are reading it from memory.
Currently, LLDB prints out a rather unhelpful error message when passed
a file that it doesn't recognize as an executable.
> error: '/path/to/file' doesn't contain any 'host' platform
> architectures: arm64, armv7, armv7f, armv7k, armv7s, armv7m, armv7em,
> armv6m, armv6, armv5, armv4, arm, thumbv7, thumbv7k, thumbv7s,
> thumbv7f, thumbv7m, thumbv7em, thumbv6m, thumbv6, thumbv5, thumbv4t,
> thumb, x86_64, x86_64, arm64, arm64e
I did a quick search internally and found at least 24 instances of users
being confused by this. This patch improves the error message when it
doesn't recognize the file as an executable, but keeps the existing
error message otherwise, i.e. when it's an object file we understand,
but the current platform doesn't support.
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
In Apple's downstream fork, there is support for understanding the swift
AST sections in various binaries. Even though the lldb on llvm.org does
not have support for debugging swift, I think it makes sense to move
support for recognizing swift ast sections upstream.
Differential Revision: https://reviews.llvm.org/D159142
There can be zero padding bytes at a section end for file alignment in
PECOFF. Exclude those padding bytes when reading the section data.
Differential Revision: https://reviews.llvm.org/D157059
This patch adds support for creating modules from JSON object files.
This is necessary for the crashlog use case where we don't have either a
module or a symbol file. In that case the ObjectFileJSON serves as both.
The patch adds support for an object file type (i.e. executable, shared
library, etc). It also adds the ability to specify sections, which is
necessary in order specify symbols by address. Finally, this patch
improves error handling and fixes a bug where we wouldn't read more than
the initial 512 bytes in GetModuleSpecifications.
Differential revision: https://reviews.llvm.org/D148062
Currently, all data buffers are assumed to be writable. This is a
problem on macOS where it's not allowed to load unsigned binaries in
memory as writable. To be more precise, MAP_RESILIENT_CODESIGN and
MAP_RESILIENT_MEDIA need to be set for mapped (unsigned) binaries on our
platform.
Binaries are mapped through FileSystem::CreateDataBuffer which returns a
DataBufferLLVM. The latter is backed by a llvm::WritableMemoryBuffer
because every DataBuffer in LLDB is considered to be writable. In order
to use a read-only llvm::MemoryBuffer I had to split our abstraction
around it.
This patch distinguishes between a DataBuffer (read-only) and
WritableDataBuffer (read-write) and updates LLDB to use the appropriate
one.
rdar://74890607
Differential revision: https://reviews.llvm.org/D122856
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
This is an updated version of the https://reviews.llvm.org/D113789 patch with the following changes:
- We no longer modify modification times of the cache files
- Use LLVM caching and cache pruning instead of making a new cache mechanism (See DataFileCache.h/.cpp)
- Add signature to start of each file since we are not using modification times so we can tell when caches are stale and remove and re-create the cache file as files are changed
- Add settings to control the cache size, disk percentage and expiration in days to keep cache size under control
This patch enables symbol tables to be cached in the LLDB index cache directory. All cache files are in a single directory and the files use unique names to ensure that files from the same path will re-use the same file as files get modified. This means as files change, their cache files will be deleted and updated. The modification time of each of the cache files is not modified so that access based pruning of the cache can be implemented.
The symbol table cache files start with a signature that uniquely identifies a file on disk and contains one or more of the following items:
- object file UUID if available
- object file mod time if available
- object name for BSD archive .o files that are in .a files if available
If none of these signature items are available, then the file will not be cached. This keeps temporary object files from expressions from being cached.
When the cache files are loaded on subsequent debug sessions, the signature is compare and if the file has been modified (uuid changes, mod time changes, or object file mod time changes) then the cache file is deleted and re-created.
Module caching must be enabled by the user before this can be used:
symbols.enable-lldb-index-cache (boolean) = false
(lldb) settings set symbols.enable-lldb-index-cache true
There is also a setting that allows the user to specify a module cache directory that defaults to a directory that defaults to being next to the symbols.clang-modules-cache-path directory in a temp directory:
(lldb) settings show symbols.lldb-index-cache-path
/var/folders/9p/472sr0c55l9b20x2zg36b91h0000gn/C/lldb/IndexCache
If this setting is enabled, the finalized symbol tables will be serialized and saved to disc so they can be quickly loaded next time you debug.
Each module can cache one or more files in the index cache directory. The cache file names must be unique to a file on disk and its architecture and object name for .o files in BSD archives. This allows universal mach-o files to support caching multuple architectures in the same module cache directory. Making the file based on the this info allows this cache file to be deleted and replaced when the file gets updated on disk. This keeps the cache from growing over time during the compile/edit/debug cycle and prevents out of space issues.
If the cache is enabled, the symbol table will be loaded from the cache the next time you debug if the module has not changed.
The cache also has settings to control the size of the cache on disk. Each time LLDB starts up with the index cache enable, the cache will be pruned to ensure it stays within the user defined settings:
(lldb) settings set symbols.lldb-index-cache-expiration-days <days>
A value of zero will disable cache files from expiring when the cache is pruned. The default value is 7 currently.
(lldb) settings set symbols.lldb-index-cache-max-byte-size <size>
A value of zero will disable pruning based on a total byte size. The default value is zero currently.
(lldb) settings set symbols.lldb-index-cache-max-percent <percentage-of-disk-space>
A value of 100 will allow the disc to be filled to the max, a value of zero will disable percentage pruning. The default value is zero.
Reviewed By: labath, wallace
Differential Revision: https://reviews.llvm.org/D115324
Symbol table parsing has evolved over the years and many plug-ins contained duplicate code in the ObjectFile::GetSymtab() that used to be pure virtual. With this change, the "Symbtab *ObjectFile::GetSymtab()" is no longer virtual and will end up calling a new "void ObjectFile::ParseSymtab(Symtab &symtab)" pure virtual function to actually do the parsing. This helps centralize the code for parsing the symbol table and allows the ObjectFile base class to do all of the common work, like taking the necessary locks and creating the symbol table object itself. Plug-ins now just need to parse when they are asked to parse as the ParseSymtab function will only get called once.
This is a retry of the original patch https://reviews.llvm.org/D113965 which was reverted. There was a deadlock in the Manual DWARF indexing code during symbol preloading where the module was asked on the main thread to preload its symbols, and this would in turn cause the DWARF manual indexing to use a thread pool to index all of the compile units, and if there were relocations on the debug information sections, these threads could ask the ObjectFile to load section contents, which could cause a call to ObjectFileELF::RelocateSection() which would ask for the symbol table from the module and it would deadlock. We can't lock the module in ObjectFile::GetSymtab(), so the solution I am using is to use a llvm::once_flag to create the symbol table object once and then lock the Symtab object. Since all APIs on the symbol table use this lock, this will prevent anyone from using the symbol table before it is parsed and finalized and will avoid the deadlock I mentioned. ObjectFileELF::GetSymtab() was never locking the module lock before and would put off creating the symbol table until somewhere inside ObjectFileELF::GetSymtab(). Now we create it one time inside of the ObjectFile::GetSymtab() and immediately lock it which should be safe enough. This avoids the deadlocks and still provides safety.
Differential Revision: https://reviews.llvm.org/D114288
This reverts commit 951b107eedab1829f18049443f03339dbb0db165.
Buildbots were failing, there is a deadlock in /Users/gclayton/Documents/src/llvm/clean/llvm-project/lldb/test/Shell/SymbolFile/DWARF/DW_AT_range-DW_FORM_sec_offset.s when ELF files try to relocate things.
Symbol table parsing has evolved over the years and many plug-ins contained duplicate code in the ObjectFile::GetSymtab() that used to be pure virtual. With this change, the "Symbtab *ObjectFile::GetSymtab()" is no longer virtual and will end up calling a new "void ObjectFile::ParseSymtab(Symtab &symtab)" pure virtual function to actually do the parsing. This helps centralize the code for parsing the symbol table and allows the ObjectFile base class to do all of the common work, like taking the necessary locks and creating the symbol table object itself. Plug-ins now just need to parse when they are asked to parse as the ParseSymtab function will only get called once.
Differential Revision: https://reviews.llvm.org/D113965
This is a resubmission of https://reviews.llvm.org/D105160 after fixing testing issues.
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D106837
This reverts commit c8164d0276b97679e80db01adc860271ab4a5d11 and
43f6dad2344247976d5777f56a1fc29e39c6c717 because it breaks
TestDyldTrieSymbols.py on GreenDragon.
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
- not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
- doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
- removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D105160
Reverts commits:
"Fix failing tests after https://reviews.llvm.org/D104488."
"Fix buildbot failure after https://reviews.llvm.org/D104488."
"Create synthetic symbol names on demand to improve memory consumption and startup times."
This series of commits broke the windows lldb bot and then failed to fix all of the failing tests.
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
- not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
- doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
- removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D104488
Some larger projects were loading quite slowly with the current LLDB on macOS and macOS simulator builds. I did some instrument traces and found 3 main culprits:
- a LLDB timer that was put into a function that was called too often
- a std::set that was keeping track of the address of symbols that were already added
- a unnamed function generator in ObjectFile that was going slow due to allocations
In order to see this in action I ran the latest LLDB on a large application with many frameworks using the following method:
(lldb) script import time; start_time = time.perf_counter()
(lldb) file Large.app
(lldb) script print(time.perf_counter() - start_time)
I first range "sudo purge" to clear the system file caches to simulate a cold startup of the debugger, followed by two iterations with warm file caches.
Prior to this fix I was seeing the following timings:
17.68 (cold)
14.56 (warm 1)
14.52 (warm 2)
After this fix I was seeing:
11.32 (cold)
8.43 (warm 1)
8.49 (warm 2)
Differential Revision: https://reviews.llvm.org/D103504
This patch introduces a LLDB_SCOPED_TIMER macro to hide the needlessly
repetitive creation of scoped timers in LLDB. It's similar to the
LLDB_LOG(F) macro.
Differential revision: https://reviews.llvm.org/D93663
Part 2 of a fix for JITed code debugging. This has been a regression from 5.0 to 6.0 and it's still reproducible on current master: https://bugs.llvm.org/show_bug.cgi?id=36209 Part 1 was D61611 a while ago.
The in-memory object files we obtain from JITLoaderGDB are not yet relocated. It looks like this used to happen on the LLDB side and my guess is that it broke with D38142. (However, it's hard to tell because the whole thing was broken already due to the bug in part 1.) The patch moved relocation resolution to a later point in time and didn't apply it to in-memory objects. I am not aware of any reason why we wouldn't resolve relocations per-se, so I made it unconditional here. On Debian, it fixes the bug for me and all tests in `check-lldb` are still fine.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D90769
Summary:
This patch extends the ModuleSpec class to include a
DataBufferSP which contains the module data. If this
data is provided, LLDB won't try to hit the filesystem
to create the Module, but use only the data stored in
the ModuleSpec.
Reviewers: labath, espindola
Subscribers: emaste, MaskRay, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83512
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
These are the last sections not managed by the DWARFContext object. I
also introduce separate SectionType enums for dwo section variants, as
this is necessary for proper handling of single-file split dwarf.
If not set, the address byte size was implied to be the one of the
host process.
This allows reverting the functional change from 31087b2ae9154, since
now PECOFF does the same as ELF and MachO wrt setting both byte order
and address size on m_data within ParseHeader.
Differential Revision: https://reviews.llvm.org/D71108
If filling in a DataExtractor from an ObjectFile, e.g. via the
ReadSectionData method, the output DataExtractor gets the address
size from the m_data member.
ObjectFile's m_data member is initialized without knowledge about
the address size (so the address size is set based on the host's
sizeof(void*), and at that point within ObjectFile's constructor,
virtual methods implemented in subclasses (like GetAddressByteSize())
can't be called, therefore fix it up when filling in external
DataExtractors.
This makes sure that line tables from executables with a different
address size are parsed properly; previously this tripped up
DWARFDebugLine::LineTable::parse for 32 bit executables on a 64 bit
host, as the address size in the line table (4) didn't match the
one set in the DWARFDataExtractor.
Differential Revision: https://reviews.llvm.org/D70848
This patch adds an implementation of unwinding using PE EH info. It allows to
get almost ideal call stacks on 64-bit Windows systems (except some epilogue
cases, but I believe that they can be fixed with unwind plan disassembly
augmentation in the future).
To achieve the goal the CallFrameInfo abstraction was made. It is based on the
DWARFCallFrameInfo class interface with a few changes to make it less
DWARF-specific.
To implement the new interface for PECOFF object files the class PECallFrameInfo
was written. It uses the next helper classes:
- UnwindCodesIterator helps to iterate through UnwindCode structures (and
processes chained infos transparently);
- EHProgramBuilder with the use of UnwindCodesIterator constructs EHProgram;
- EHProgram is, by fact, a vector of EHInstructions. It creates an abstraction
over the low-level unwind codes and simplifies work with them. It contains
only the information that is relevant to unwinding in the unified form. Also
the required unwind codes are read from the object file only once with it;
- EHProgramRange allows to take a range of EHProgram and to build an unwind row
for it.
So, PECallFrameInfo builds the EHProgram with EHProgramBuilder, takes the ranges
corresponding to every offset in prologue and builds the rows of the resulted
unwind plan. The resulted plan covers the whole range of the function except the
epilogue.
Reviewers: jasonmolenda, asmith, amccarth, clayborg, JDevlieghere, stella.stamenova, labath, espindola
Reviewed By: jasonmolenda
Subscribers: leonid.mashinskiy, emaste, mgorny, aprantl, arichardson, MaskRay, lldb-commits, llvm-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67347
llvm-svn: 374528
This change is mostly performance-neutral since our regex engine is
fast, but it's IMHO slightly more readable. Also, matching matching
parenthesis is not a great match for regular expressions.
Differential Revision: https://reviews.llvm.org/D68609
llvm-svn: 374082
Originally I wanted to remove the RegularExpression class in Utility and
replace it with llvm::Regex. However, during that transition I noticed
that there are several places where need the regular expression string.
So instead I propose to keep the RegularExpression class and make it a
thin wrapper around llvm::Regex.
This patch also removes the workaround for empty regular expressions.
The result is that we are now (more or less) POSIX conformant.
Differential revision: https://reviews.llvm.org/D66174
llvm-svn: 369153
Summary:
On the heels of D62934, this patch uses the same approach to introduce
llvm RTTI support to the ObjectFile hierarchy. It also replaces the
existing uses of GetPluginName doing run-time type checks with
llvm::dyn_cast and friends.
This formally introduces new dependencies from some other plugins to
ObjectFile plugins. However, I believe this is fine because:
- these dependencies were already kind of there, and the only reason
we could get away with not modeling them explicitly was because the
code was relying on magically knowing what will GetPluginName() return
for a particular kind of object files.
- the dependencies themselves are logical (it makes sense for
SymbolVendorELF to depend on ObjectFileELF), or at least don't
actively get in the way (the JitLoaderGDB->MachO thing).
- they don't introduce any new dependency loops as ObjectFile plugins
don't depend on any other plugins
Reviewers: xiaobai, JDevlieghere, espindola
Subscribers: emaste, mgorny, arichardson, MaskRay, lldb-commits
Differential Revision: https://reviews.llvm.org/D65450
llvm-svn: 367413
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
