Depends on #169603.
This is the `use_device_ptr` counterpart of #168905.
With OpenMP 6.1, a `fallback` modifier can be specified on the
`use_device_ptr` clause to control the behavior when a pointer lookup
fails, i.e. there is no device pointer to translate into.
The default is `fb_preserve` (i.e. retain the original pointer), while
`fb_nullify` means: use `nullptr` as the translated pointer.
Dependent PR: #173930.
Corrected various spelling mistakes such as 'occurred', 'receiver',
'initialized', 'length', and others in comments, variable names,
function names, and documentation throughout the project. These
changes improve code readability and maintain consistency in naming
and documentation.
Co-authored-by: Louis Dionne <ldionne.2@gmail.com>
OpenMP 6.0 introduced a `fuse` directive, and with it a "loop sequence"
as the associated code. What used to be "loop association" has become
"loop-nest association".
Rename Association::Loop to LoopNest, add Association::LoopSeq to
represent the "loop sequence" association.
Change the association of fuse from "block" to "loop sequence".
This PR adds support for the `dyn_groupprivate` clause, which will be
part of OpenMP 6.1. This feature allows users to request dynamic shared
memory on target regions.
---------
Co-authored-by: Krzysztof Parzyszek <Krzysztof.Parzyszek@amd.com>
This change implements the fuse directive, `#pragma omp fuse`, as specified in the OpenMP 6.0, along with the `looprange` clause in clang.
This change also adds minimal stubs so flang keeps compiling (a full implementation in flang of this directive is still pending).
---------
Co-authored-by: Roger Ferrer Ibanez <roger.ferrer@bsc.es>
Per OpenMP 6.0 specification, section 7.9.9
Argument keywords, page 291, L17
Semantics, page 292, L15-16
The behavior of 'private' should be described in the same manner as that
of 'firstprivate'
15 ... If implicit-behavior is firstprivate, 16 the attribute is a
data-sharing attribute of firstprivate.
Relevant OpenMP 6.0 issues
defaultmap clause new implicit-behavior 'private' should be documented
https://github.com/OpenMP/spec/issues/4571
Issue 4571: Add missing sentence about private to defaultmap
https://github.com/OpenMP/spec/pull/4577
Testing:
Updated 'defaultmap' error message and codegen LIT tests to verify
behavior of 'private' in OpenMP 6.0.
First of two patches split from original defaultmap PR:
https://github.com/llvm/llvm-project/pull/157767
Per OpenMP 6.0 specification, section 7.9.9
Argument keywords, page 291, L17
Additional information, page 291, L24-25
24 The value alloc may also be specified as implicit-behavior with
identical meaning to the value 25 storage.
Testing:
Updated 'defaultmap' error message and codegen LIT tests to verify
behavior in OpenMP 6.0.
This is preparatory work for the implementation of `#pragma omp fuse` in
https://github.com/llvm/llvm-project/pull/139293
Not all OpenMP loop transformations makes sense to make them inherit
from `OMPLoopBasedDirective`, in particular in OpenMP 6.0 'fuse' (to be
implemented later) is a transformation of a canonical loop sequence.
This change renames class `OMPLoopTransformationDirective` to
`OMPCanonicalLoopNestTransformationDirective` so we can reclaim that
name in a later change.
Implement parsing and semantic analysis support for the optional
'strict' modifier of the num_threads clause. This modifier has been
introduced in OpenMP 6.0, section 12.1.2.
Note: this is basically 1:1 https://reviews.llvm.org/D138328.
OpenMP has restrictions on directives allowed to be strictly nested
inside a
construct with the order(concurrent) clause specified.
- OpenMP 5.0, 5.1, and 5.2 allows: 'loop', 'parallel', 'simd', and
combined directives starting with 'parallel'.
- OpenMP 6.0 allows: the above directives plus 'atomic' and
all loop-transformation directives.
Furthermore, a region that corresponds to a construct with
order(concurrent)
specified may not contain calls to the OpenMP runtime API.
This PR fixes the following issues in the current implementation:
With -fopenmp-version=50: none of the nesting restrictions above were
enforced
With -fopenmp-version=60:
1. Clang did not reject OpenMP runtime APIs encountered in the region.
2. Clang erroneously rejected combined directives starting with
parallel.
---------
Co-authored-by: Zahira Ammarguellat <zahira.ammarguellat@intel.com>
From OpenMP 6.0 features list
- OpenMP directives in concurrent loop regions
- atomics constructs on concurrent loop regions
- Lift nesting restriction on concurrent loop
Testing
- Updated test/OpenMP/for_order_messages.cpp
- check-all
The 'allocator' modifier is now accepted in the 'allocate' clause. Added
LIT tests covering codegen, PCH, template handling, and serialization
for 'allocator' modifier.
Added support for allocator-modifier to release notes.
Testing
- New allocate modifier LIT tests.
- OpenMP LIT tests.
- check-all
- relevant sollve_vv test cases
tests/5.2/scope/test_scope_allocate_construct.c
Add the permutation clause for the interchange directive which will be
introduced in the upcoming OpenMP 6.0 specification. A preview has been
published in
[Technical Report12](https://www.openmp.org/wp-content/uploads/openmp-TR12.pdf).
This is a minimal patch to support parsing for "omp assume" directives.
These are meant to be hints to a compiler's optimisers: as such, it is
legitimate (if not very useful) to ignore them. The patch builds on top
of the existing support for "omp assumes" directives (note spelling!).
Unlike the "omp [begin/end] assumes" directives, "omp assume" is
associated with a compound statement, i.e. it can appear within a
function. The "holds" assumption could (theoretically) be mapped onto
the existing builtin "__builtin_assume", though the latter applies to a
single point in the program, and the former to a range (i.e. the whole
of the associated compound statement).
This patch fixes sollve's OpenMP 5.1 "omp assume"-based tests.
Add the reverse directive which will be introduced in the upcoming
OpenMP 6.0 specification. A preview has been published in [Technical
Report 12](https://www.openmp.org/wp-content/uploads/openmp-TR12.pdf).
---------
Co-authored-by: Alexey Bataev <a.bataev@outlook.com>
Replace the switch in `getOpenMPCaptureRegions` with a loop collecting
capture regions based on the constituent directives.
---------
Co-authored-by: Alexey Bataev <a.bataev@outlook.com>
What is considered "executable" in clang differs slightly from the
OpenMP's "executable" category. In addition to the executable category,
subsidiary directives, and OMPD_error are considered executable.
Implement a function that performs that check.
Add members "leafConstructs" and "association" to .td describing
OpenMP/ACC directives. The naming follows the terminology used in the
OpenMP standard: a "leaf" construct is a construct that is itself not a
composition or a combination of other constructs, and "association" is
the source language construct to which the directive applies (e.g. loop,
block, etc.)
The tblgen-generated output then contains two additional functions
- getLeafConstructs(D), and
- getDirectiveAssociation(D)
plus "enum class Association", all in namespaces "llvm::omp" and
"llvm::acc".
Note: getLeafConstructs returns an empty sequence for a construct that
is itself a leaf construct.
Use the new functions to simplify a few OpenMP-related functions in
clang.
This reverts commit edd675ac283909397880f85ba68d0d5f99dc1be2.
This breaks clang build where every component is a shared library.
The file clang/lib/Basic/OpenMPKinds.cpp, which is a part of
libclangBasic.so, uses `getOpenMPClauseName` which isn't:
/usr/bin/ld: CMakeFiles/obj.clangBasic.dir/OpenMPKinds.cpp.o: in functio
n `clang ::getOpenMPSimpleClauseTypeName(llvm::omp::Clause, unsigned int
)':
OpenMPKinds.cpp:(.text._ZN5clang29getOpenMPSimpleClauseTypeNameEN4llvm3o
mp6ClauseEj+0x9b): undefined reference to `llvm::omp::getOpenMPClauseNam
e(llvm::omp::Clause)'
This is a support for " #pragma omp atomic compare fail ". It has Parser & AST support for now.
Reviewed By: tianshilei1992, ABataev
Differential Revision: https://reviews.llvm.org/D123235
offloading
- This patch adds support for thread_limit clause on target directive according to OpenMP 51 [2.14.5]
- The idea is to create an outer task for target region, when there is a thread_limit clause, and manipulate the thread_limit of task instead. This way, thread_limit will be applied to all the relevant constructs enclosed by the target region.
Differential Revision: https://reviews.llvm.org/D152054
structured-block
where clause is one of the following:
private(list)
reduction([reduction-modifier ,] reduction-identifier : list)
nowait
Differential Revision: https://reviews.llvm.org/D157933
The loop directive is a descriptive construct which allows the compiler
flexibility in how it generates code for the directive's associated
loop(s). See OpenMP specification 5.2 [257:8-9].
Codegen added in this patch for the combined 'loop' directives are:
'target teams loop' -> 'target teams distribute parallel for'
'teams loop' -> 'teams distribute parallel for'
'target parallel loop' -> 'target parallel for'
'parallel loop' -> 'parallel for'
NOTE: The implementation of the 'loop' directive itself is unchanged.
Differential Revision: https://reviews.llvm.org/D145823
This patch gives basic parsing and semantic support for "modifiers" of order clause introduced in OpenMP 5.1 ( section 2.11.3 )
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D127855
This patch gives basic parsing and semantic analysis support for 'strict'
modifier with 'num_tasks' clause of 'taskloop' construct introduced in
OpenMP 5.1 (section 2.12.2)
Differential Revision: https://reviews.llvm.org/D138328
This patch gives basic parsing and semantic analysis support for 'strict'
modifier with 'grainsize' clause of 'taskloop' construct introduced in
OpenMP 5.1 (section 2.12.2)
Differential Revision: https://reviews.llvm.org/D138217
Error directive is allowed in both declared and executable contexts.
The function ActOnOpenMPAtClause is called in both places during the
parsers.
Adding a param "bool InExContext" to identify context which is used to
emit error massage.
Differential Revision: https://reviews.llvm.org/D137851
This patch gives basic parsing and semantic support for
"parallel masked taskloop simd" construct introduced in
OpenMP 5.1 (section 2.16.10)
Differential Revision: https://reviews.llvm.org/D128946
This patch gives basic parsing and semantic support for
"parallel masked taskloop" construct introduced in
OpenMP 5.1 (section 2.16.9)
Differential Revision: https://reviews.llvm.org/D128834
