This patch implements `MCInstrAnalysis` state in order to be able
analyze auipc+jalr pairs inside `evaluateBranch`.
This is implemented as follows:
- State: array of currently known GPR values;
- Whenever an auipc is detected in `updateState`, update the state value
of RD with the immediate;
- Whenever a jalr is detected in `evaluateBranch`, check if the state
holds a value for RS1 and use that to compute its target.
Note that this is similar to how binutils implements it and the output
of llvm-objdump should now mostly match the one of GNU objdump.
This patch also updates the relevant llvm-objdump patches and adds a new
one testing the output for interleaved auipc+jalr pairs.
Currently, all the analysis functions provided by `MCInstrAnalysis` work
on a single instruction. On some targets, this limits the kind of
instructions that can be successfully analyzed as common constructs may
need multiple instructions.
For example, a typical call sequence on RISC-V uses a auipc+jalr pair.
In order to analyse the jalr inside `evaluateBranch`, information about
the corresponding auipc is needed. Similarly, AArch64 uses adrp+ldr
pairs to access globals.
This patch proposes to add state to `MCInstrAnalysis` to support these
use cases. Two new virtual methods are added:
- `updateState`: takes an instruction and its address. This methods
should be called by clients on every instruction and allows targets to
store whatever information they need to analyse future instructions.
- `resetState`: clears the state whenever it becomes irrelevant. Clients
could call this, for example, when starting to disassemble a new
function.
Note that the default implementations do nothing so this patch is NFC.
No actual state is stored inside `MCInstrAnalysis`; deciding the
structure of the state is left to the targets.
This patch also modifies llvm-objdump to use the new interface.
This patch is an alternative to
[D116677](https://reviews.llvm.org/D116677) and the idea of storing
state in `MCInstrAnalysis` was first discussed there.
Note that llvm::support::endianness has been renamed to
llvm::endianness while becoming an enum class as opposed to an
enum. This patch replaces support::{big,little,native} with
llvm::endianness::{big,little,native}.
Note that llvm::support::endianness has been renamed to
llvm::endianness while becoming an enum class as opposed to an enum.
This patch replaces llvm::support::{big,little,native} with
llvm::endianness::{big,little,native}.
Now that llvm::support::endianness has been renamed to
llvm::endianness, we can use the shorter form. This patch replaces
support::endianness with llvm::endianness.
Now that llvm::support::endianness has been renamed to
llvm::endianness, we can use the shorter form. This patch replaces
llvm::support::endianness with llvm::endianness.
Extend llvm-objdump to show CO-RE relocations when `-r` option is
passed and object file has .BTF and .BTF.ext sections.
For example, the following C program:
#define __pai __attribute__((preserve_access_index))
struct foo { int i; int j;} __pai;
struct bar { struct foo f[7]; } __pai;
extern void sink(void *);
void root(struct bar *bar) {
sink(&bar[2].f[3].j);
}
Should lead to the following objdump output:
$ clang --target=bpf -O2 -g t.c -c -o - | \
llvm-objdump --no-addresses --no-show-raw-insn -dr -
...
r2 = 0x94
CO-RE <byte_off> [2] struct bar::[2].f[3].j (2:0:3:1)
r1 += r2
call -0x1
R_BPF_64_32 sink
exit
...
More examples could be found in unit tests, see BTFParserTest.cpp.
To achieve this:
- Move CO-RE relocation kinds definitions from BPFCORE.h to BTF.h.
- Extend BTF.h with types derived from BTF::CommonType, e.g.
BTF::IntType and BTF::StrutType, to allow dyn_cast() and access to
type additional data.
- Extend BTFParser to load BTF type and relocation data.
- Modify llvm-objdump.cpp to create instance of BTFParser when
disassembly of object file with BTF sections is processed and `-r`
flag is supplied.
Additional information about CO-RE is available at [1].
[1] https://docs.kernel.org/bpf/llvm_reloc.html
Depends on D149058
Differential Revision: https://reviews.llvm.org/D150079
Add a shouldAdjustVA(Section) guard on top of address update.
Update llvm-objdump file to update symbol table when --adjust-vma used.
Fixes#63203
Patch by HamidrezaSK (Hamidreza Sanaee)
Enable color highlighting of disassembly in llvm-objdump. This patch
introduces a new flag --disassembler-color=<mode> that enables or
disables highlighting disassembly with ANSI escape codes. The default
mode is to enable color highlighting if outputting to a color-enabled
terminal.
Differential revision: https://reviews.llvm.org/D159224
All command-line tools using `llvm::opt` create an enum of option IDs and a table of `OptTable::Info` object. Most of the tools use the same ID (`OPT_##ID`), kind (`Option::KIND##Class`), group ID (`OPT_##GROUP`) and alias ID (`OPT_##ALIAS`). This patch extracts that common code into canonical macros. This results in fewer changes when tweaking the `OPTION` macros emitted by the TableGen backend.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D157028
Similar to D96617 for llvm-symbolizer.
This patch matches the GNU objdump -d behavior to suppress printing
labels for mapping symbols. Mapping symbol names don't convey much
information.
When --show-all-symbols (not in GNU) is specified, we still print
mapping symbols.
Note: the `for (size_t SI = 0, SE = Symbols.size(); SI != SE;)` loops
needs to iterate all mapping symbols, even if they are not displayed.
We use the new field `IsMappingSymbol` to recognize mapping symbols.
This field also enables simplification after D139131.
ELF/ARM/disassemble-all-mapping-symbols.s is enhanced to add `.space 2`.
If `End = std::min(End, Symbols[SI].Addr);` is not correctly set, we
would print a `.word`.
Reviewed By: jhenderson, jobnoorman, peter.smith
Differential Revision: https://reviews.llvm.org/D156190
to prevent overload resolution confusion. In particular, if we add
another parameter to the generic constructor, MCDisassemblerTest.cpp
specified constructors will be resolve to the generic constructor, which
is unintended.
Mach-O can just use the global variable `FirstPrivateHeader`.
If we ever manage to remove global variables, we can add a Config
variable to Dumper. Either case, the parameter is not needed.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D156291
This is a preparation for ARM64EC/ARM64X binaries, which may contain both ARM64
and x86_64 code in the same file. llvm-objdump already has partial support for
mixing disassemblers for ARM thumb mode support. However, for ARM64EC we can't
share MCContext, MCInstrAnalysis and PrettyPrinter instances. This patch
provides additional abstraction which makes adding mixed code support later in
the series easier.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D149093
This is a preparation for ARM64EC/ARM64X binaries, which may contain both ARM64
and x86_64 code in the same file. llvm-objdump already has partial support for
mixing disassemblers for ARM thumb mode support. However, for ARM64EC we can't
share MCContext, MCInstrAnalysis and PrettyPrinter instances. This patch
provides additional abstraction which makes adding mixed code support later in
the series easier.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D149093
We pay the one-off boilerplate overhead to create `*Dumper` classes that derive
from objdump::Dumper a la llvm-readobj. This has two primary advantages.
First, a lot object file format specific code can be moved from
llvm-objdump.cpp to *Dump.cpp files. Refactor `printPrivateHeaders` as
an example.
Second, with the introduction of ELFDumper<ELFT>, we can simplify
a few dispatch functions in ELFDump.cpp.
In addition, the ObjectFile specific dumpers contains a ObjectFile specific
reference so that we can remove a lot of `cast<*ObjectFile>(Obj)`.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D155045
Port D69671 (llvm-readobj) to llvm-objdump. Add a class llvm::objdump::Dumper
and move some free functions into Dumper so that they can call
reportUniqueWarning.
Warnings seems preferable in these cases as the issue is localized and we can
continue dumping other information.
Differential Revision: https://reviews.llvm.org/D154754
* Relax the AsmParser to accept `.amdhsa_wavefront_size32 0` when the
`.amdhsa_shared_vgpr_count` directive is present.
* Teach the KD disassembler to respect the setting of
KERNEL_CODE_PROPERTY_ENABLE_WAVEFRONT_SIZE32 when calculating the
value of `.amdhsa_next_free_vgpr`.
* Teach the KD disassembler to disassemble COMPUTE_PGM_RSRC3 for gfx90a
and gfx10+.
* Include "pseudo directive" comments for gfx10 fields which are not
controlled by any assembler directive.
* Fix disassembleObject failure diagnostic in llvm-objdump to not
hard-code a comment string, and to follow the convention of not
capitalizing the first sentence.
Reviewed By: rochauha
Differential Revision: https://reviews.llvm.org/D128014
Summary:
Adding a new option -traceback-table to print out the traceback info of xcoff ojbect file.
Reviewers: James Henderson, Fangrui Song, Stephen Peckham, Xing Xue
Differential Revision: https://reviews.llvm.org/D89049
As suggested by @erichkeane in
https://reviews.llvm.org/D141451#inline-1429549
There's potential for a lot more cleanups around these APIs. This is
just a start.
Callers need to be more careful about sub-expressions producing strings
that don't outlast the expression using `llvm::demangle`. Add a
release note.
Differential Revision: https://reviews.llvm.org/D149104
If a symbol needs both JUMP_SLOT and GLOB_DAT relocations, there is a
minor linker optimization to keep just GLOB_DAT. This optimization
is only implemented by GNU ld's x86 port and mold.
https://maskray.me/blog/2021-08-29-all-about-global-offset-table#combining-.got-and-.got.plt
With the optimizing, the PLT entry is placed in .plt.got and the
associated GOTPLT entry is placed in .got (ld.bfd -z now) or .got.plt (ld.bfd -z lazy).
The relocation is in .rel[a].dyn.
This patch synthesizes `symbol@plt` labels for these .plt.got entries.
Example:
```
cat > a.s <<e
.globl _start; _start:
mov combined0@gotpcrel(%rip), %rax; mov combined1@gotpcrel(%rip), %rax
call combined0@plt; call combined1@plt
call foo0@plt; call foo1@plt
e
cat > b.s <<e
.globl foo0, foo1, combined0, combined1
foo0: foo1: combined0: combined1:
e
gcc -fuse-ld=bfd -shared b.s -o b.so
gcc -fuse-ld=bfd -pie -nostdlib a.s b.so -o a
```
```
Disassembly of section .plt:
0000000000001000 <.plt>:
1000: ff 35 ea 1f 00 00 pushq 0x1fea(%rip) # 0x2ff0 <_GLOBAL_OFFSET_TABLE_+0x8>
1006: ff 25 ec 1f 00 00 jmpq *0x1fec(%rip) # 0x2ff8 <_GLOBAL_OFFSET_TABLE_+0x10>
100c: 0f 1f 40 00 nopl (%rax)
0000000000001010 <foo1@plt>:
1010: ff 25 ea 1f 00 00 jmpq *0x1fea(%rip) # 0x3000 <_GLOBAL_OFFSET_TABLE_+0x18>
1016: 68 00 00 00 00 pushq $0x0
101b: e9 e0 ff ff ff jmp 0x1000 <.plt>
0000000000001020 <foo0@plt>:
1020: ff 25 e2 1f 00 00 jmpq *0x1fe2(%rip) # 0x3008 <_GLOBAL_OFFSET_TABLE_+0x20>
1026: 68 01 00 00 00 pushq $0x1
102b: e9 d0 ff ff ff jmp 0x1000 <.plt>
Disassembly of section .plt.got:
0000000000001030 <combined0@plt>:
1030: ff 25 a2 1f 00 00 jmpq *0x1fa2(%rip) # 0x2fd8 <foo1+0x2fd8>
1036: 66 90 nop
0000000000001038 <combined1@plt>:
1038: ff 25 a2 1f 00 00 jmpq *0x1fa2(%rip) # 0x2fe0 <foo1+0x2fe0>
103e: 66 90 nop
```
For x86-32, with -z now, if we remove `foo0` and `foo1`, the absence of regular
PLT will cause GNU ld to omit .got.plt, and our code cannot synthesize @plt
labels. This is an extreme corner case that almost never happens in practice (to
trigger the case, ensure every PLT symbol has been taken address). To fix it, we
can get the `_GLOBAL_OFFSET_TABLE_` symbol value, but the complexity is not
worth it.
Close https://github.com/llvm/llvm-project/issues/62537
Reviewed By: bd1976llvm
Differential Revision: https://reviews.llvm.org/D149817
This reverts commit c117c2c8ba4afd45a006043ec6dd858652b2ffcc.
itaniumDemangle calls std::strlen with the results of
std::string_view::data() which may not be NUL-terminated. This causes
lld/test/wasm/why-extract.s to fail when "expensive checks" are enabled
via -DLLVM_ENABLE_EXPENSIVE_CHECKS=ON. See D149675 for further
discussion. Back this out until the individual demanglers are converted
to use std::string_view.
As suggested by @erichkeane in
https://reviews.llvm.org/D141451#inline-1429549
There's potential for a lot more cleanups around these APIs. This is
just a start.
Callers need to be more careful about sub-expressions producing strings
that don't outlast the expression using ``llvm::demangle``. Add a
release note.
Reviewed By: MaskRay, #lld-macho
Differential Revision: https://reviews.llvm.org/D149104
This makes parsing for build IDs in the markup filter slightly more
permissive, in line with fromHex.
It also removes the distinction between missing build ID and empty build
ID; empty build IDs aren't a useful concept, since their purpose is to
uniquely identify a binary. This removes a layer of indirection wherever
build IDs are obtained.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D147485
Currently when using the LLVM tools (eg llvm-readobj, llvm-objdump) to
find information about basic block locations using the propeller tooling
in relocatable object files function addresses are not mapped properly
which causes problems. In llvm-readobj this means that incorrect
function names will be pulled. In llvm-objdum this means that most BBs
won't show up in the output if --symbolize-operands is used. This patch
changes the behavior of decodeBBAddrMap to trace through relocations
to get correct function addresses if it is going through a relocatable
object file. This fixes the behavior in both tools and also other
consumers of decodeBBAddrMap. Some helper functions have been added
in/refactoring done to aid in grabbing BB address map sections now that
in some cases both relocation and BB address map sections need to be
obtained at the same time.
Regression tests moved around/added.
Differential Revision: https://reviews.llvm.org/D143841
The forwarding header is left in place because of its use in
`polly/lib/External/isl/interface/extract_interface.cc`, but I have
added a GCC warning about the fact it is deprecated, because it is used
in `isl` from where it is included by Polly.
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
This avoids recomputing string length that is already known at compile time.
It has a slight impact on preprocessing / compile time, see
https://llvm-compile-time-tracker.com/compare.php?from=3f36d2d579d8b0e8824d9dd99bfa79f456858f88&to=e49640c507ddc6615b5e503144301c8e41f8f434&stat=instructions:u
This a recommit of e953ae5bbc313fd0cc980ce021d487e5b5199ea4 and the subsequent fixes caa713559bd38f337d7d35de35686775e8fb5175 and 06b90e2e9c991e211fecc97948e533320a825470.
The above patchset caused some version of GCC to take eons to compile clang/lib/Basic/Targets/AArch64.cpp, as spotted in aa171833ab0017d9732e82b8682c9848ab25ff9e.
The fix is to make BuiltinInfo tables a compilation unit static variable, instead of a private static variable.
Differential Revision: https://reviews.llvm.org/D139881
Revert "Fix lldb option handling since e953ae5bbc313fd0cc980ce021d487e5b5199ea4 (part 2)"
Revert "Fix lldb option handling since e953ae5bbc313fd0cc980ce021d487e5b5199ea4"
GCC build hangs on this bot https://lab.llvm.org/buildbot/#/builders/37/builds/19104
compiling CMakeFiles/obj.clangBasic.dir/Targets/AArch64.cpp.d
The bot uses GNU 11.3.0, but I can reproduce locally with gcc (Debian 12.2.0-3) 12.2.0.
This reverts commit caa713559bd38f337d7d35de35686775e8fb5175.
This reverts commit 06b90e2e9c991e211fecc97948e533320a825470.
This reverts commit e953ae5bbc313fd0cc980ce021d487e5b5199ea4.
