it succeeded, since the plan that was using it can figure out what to do from there.
It should only say it failed if it truely went off into the weeds.
<rdar://problem/15597807>
llvm-svn: 196631
<rdar://problem/15314403>
This patch adds a new lldb_private::SectionLoadHistory class that tracks what shared libraries were loaded given a process stop ID. This allows us to keep a history of the sections that were loaded for a time T. Many items in history objects will rely upon the process stop ID in the future.
llvm-svn: 196557
lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used.
Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number.
Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings.
llvm-svn: 196141
Added _WIN32 guards to new platform features. Using correct SetErrorStringWithFormat within Host when LLDB_DISABLE_POSIX is defined. Also fixed an if defined block.
llvm-svn: 195766
From Jim Ingham's email:
It does look like ThreadPlanStepInRange test is some kind of thinko.
In practice, in this case it is probably safe to run only one thread
when doing the "step through" since that generally involved running
from a shared library stub to its target. That could deadlock if the
dynamic loader has to fix up the symbol, and another thread is in the
middle of doing that. But that doesn't seem to be very common, or at
least the code is clearly wrong but I haven't had any reports of this
causing deadlocks...
llvm-svn: 195657
Mainly patched to stop LLDB from crashing. This can easily happen if you debug to a remote gdbserver that doesn't have any dynamic register info and you don't have a target definition file specified.
llvm-svn: 195499
Example code:
remote_platform = lldb.SBPlatform("remote-macosx");
remote_platform.SetWorkingDirectory("/private/tmp")
debugger.SetSelectedPlatform(remote_platform)
connect_options = lldb.SBPlatformConnectOptions("connect://localhost:1111");
err = remote_platform.ConnectRemote(connect_options)
if err.Success():
print >> result, 'Connected to remote platform:'
print >> result, 'hostname: %s' % (remote_platform.GetHostname())
src = lldb.SBFileSpec("/Applications/Xcode.app/Contents/SharedFrameworks/LLDB.framework", False)
dst = lldb.SBFileSpec()
# copy src to platform working directory since "dst" is empty
err = remote_platform.Install(src, dst);
if err.Success():
print >> result, '%s installed successfully' % (src)
else:
print >> result, 'error: failed to install "%s": %s' % (src, err)
Implemented many calls needed in lldb-platform to be able to install a directory that contains symlinks, file and directories.
The remote lldb-platform can now launch GDB servers on the remote system so that remote debugging can be spawned through the remote platform when connected to a remote platform.
The API in SBPlatform is subject to change and will be getting many new functions.
llvm-svn: 195273
do anything right now. Add a few new methods to the Thread base
class which HistoryThread needs. I think I updated all the
CMakeLists files correctly for the new plugin.
llvm-svn: 194756
Added two new GDB server packets to debugserver: "QSaveRegisterState" and "QRestoreRegiterState".
"QSaveRegisterState" makes the remote GDB server save all register values and it returns a save identifier as an unsigned integer. This packet can be used prior to running expressions to save all registers.
All registers can them we later restored with "QRestoreRegiterState:SAVEID" what SAVEID is the integer identifier that was returned from the call to QSaveRegisterState.
Cleaned up redundant code in lldb_private::Thread, lldb_private::ThreadPlanCallFunction.
Moved the lldb_private::Thread::RegisterCheckpoint into its own header file and it is now in the lldb_private namespace. Trimmed down the RegisterCheckpoint class to omit stuff that wasn't used (the stack ID).
Added a few new virtual methods to lldb_private::RegisterContext that allow subclasses to efficiently save/restore register states and changed the RegisterContextGDBRemote to take advantage of these new calls.
llvm-svn: 194621
something; add a new ExtendedThreadList to Process where they can be retained
for the duration of a public stop.
<rdar://problem/15314068>
llvm-svn: 194367
llvm::ArrayRef of arguments rather than taking
a fixed number of possibly-NULL pointers to
arguments.
Also changed ClangFunction::GetThreadPlanToCallFunction
to take the address of the argument struct by value
instead of by reference, since it doesn't actually
modify the value passed into it.
llvm-svn: 194232
It completes the job of using EvaluateExpressionOptions consistently throughout
the inferior function calling mechanism in lldb begun in Greg's patch r194009.
It removes a handful of alternate calls into the ClangUserExpression/ClangFunction/ThreadPlanCallFunction which
were there for convenience. Using the EvaluateExpressionOptions removes the need for them.
Using that it gets the --debug option from Greg's patch to work cleanly.
It also adds another EvaluateExpressionOption to not trap exceptions when running expressions. You shouldn't
use this option unless you KNOW your expression can't throw beyond itself. This is:
<rdar://problem/15374885>
At present this is only available through the SB API's or python.
It fixes a bug where function calls would unset the ObjC & C++ exception breakpoints without checking whether
they were set by somebody else already.
llvm-svn: 194182
Fixed the test case for "test/functionalities/exec/TestExec.py" on Darwin.
The issue was breakpoints were persisting and causing problems. When we exec, we need to clear out the process and target and start fresh with nothing and let the breakpoints populate themselves again. This patch correctly clears out the breakpoints and also flushes the process so that the objects (process/thread/frame) give out valid information.
llvm-svn: 194106
Instead of looking up registers by name, we use the generic ID when we can.
Also added code that creates an extra frame when running expressions by pushing the current PC and FP and then hooking up the FP backchain. This code is "#if 0" out for now until we can pair it with unwinder fixes.
llvm-svn: 194035
Cleaned up ClangUserExpression::Evaluate() to have only one variant that takes a "const EvaluateExpressionOptions& options" instead of taking many arguments.
The "--debug" option is designed to allow you to debug your expression by stopping at the first instruction (it enables --ignore-breakpoints=true and --unwind-on-error=false) and allowing you to step through your JIT code. It needs to be more integrated with the thread plan, so I am checking this in so Jim Ingham can make it happen.
llvm-svn: 194009
at some point in the past. We may have nothing more than a pc value
for this type of stack frame -- hopefully we'll have a pc and a
stop_id so we can track module loads and unloads over time and
symbolicate the pc at the correct point in time.
Also add a flag to indicate if the CFA for the frame is available
(a bit different from a CFA of LLDB_INVALID_ADDRESS) and also an
overall setting to indicate whether this is a history stack frame
or not. A history stack frame may not have a CFA, it may not have
a register context, it may not have variables, it may not have a
frame pointer or a stack pointer.
<rdar://problem/15314068>
llvm-svn: 193987
pure virtual base class and made StackFrame a subclass of that. As
I started to build on top of that arrangement today, I found that it
wasn't working out like I intended. Instead I'll try sticking with
the single StackFrame class -- there's too much code duplication to
make a more complicated class hierarchy sensible I think.
llvm-svn: 193983
defines a protocol that all subclasses will implement. StackFrame
is currently the only subclass and the methods that Frame vends are
nearly identical to StackFrame's old methods.
Update all callers to use Frame*/Frame& instead of pointers to
StackFrames.
This is almost entirely a mechanical change that touches a lot of
the code base so I'm committing it alone. No new functionality is
added with this patch, no new subclasses of Frame exist yet.
I'll probably need to tweak some of the separation, possibly moving
some of StackFrame's methods up in to Frame, but this is a good
starting point.
<rdar://problem/15314068>
llvm-svn: 193907
In almost all cases, the misuse is about "%lu" being used instead of the correct "%zu" (even though these are compatible on 64-bit platforms in practice). There are even a couple of cases where "%ld" (ie., signed int) is used instead of "%zu", and one where "%lu" is used instead of "%" PRIu64.
Fixes bug #17551.
Patch by "/dev/humancontroller"
llvm-svn: 193832
To make this work this patch extends LLDB to:
- Explicitly track the link_map address for each module. This is effectively the module handle, not sure why it wasn't already being stored off anywhere. As an extension later, it would be nice if someone were to add support for printing this as part of the modules list.
- Allow reading the per-thread data pointer via ptrace. I have added support for Linux here. I'll be happy to add support for FreeBSD once this is reviewed. OS X does not appear to have __thread variables, so maybe we don't need it there. Windows support should eventually be workable along the same lines.
- Make DWARF expressions track which module they originated from.
- Add support for the DW_OP_GNU_push_tls_address DWARF opcode, as generated by gcc and recent versions of clang. Earlier versions of clang (such as 3.2, which is default on Ubuntu right now) do not generate TLS debug info correctly so can not be supported here.
- Understand the format of the pthread DTV block. This is where it gets tricky. We have three basic options here:
1) Call "dlinfo" or "__tls_get_addr" on the inferior and ask it directly. However this won't work on core dumps, and generally speaking it's not a good idea for the debugger to call functions itself, as it has the potential to not work depending on the state of the target.
2) Use libthread_db. This is what GDB does. However this option requires having a version of libthread_db on the host cross-compiled for each potential target. This places a large burden on the user, and would make it very hard to cross-debug from Windows to Linux, for example. Trying to build a library intended exclusively for one OS on a different one is not pleasant. GDB sidesteps the problem and asks the user to figure it out.
3) Parse the DTV structure ourselves. On initial inspection this seems to be a bad option, as the DTV structure (the format used by the runtime to manage TLS data) is not in fact a kernel data structure, it is implemented entirely in useerland in libc. Therefore the layout of it's fields are version and OS dependent, and are not standardized.
However, it turns out not to be such a problem. All OSes use basically the same algorithm (a per-module lookup table) as detailed in Ulrich Drepper's TLS ELF ABI document, so we can easily write code to decode it ourselves. The only question therefore is the exact field layouts required. Happily, the implementors of libpthread expose the structure of the DTV via metadata exported as symbols from the .so itself, designed exactly for this kind of thing. So this patch simply reads that metadata in, and re-implements libthread_db's algorithm itself. We thereby get cross-platform TLS lookup without either requiring third-party libraries, while still being independent of the version of libpthread being used.
Test case included.
llvm-svn: 192922
Added a way to set hardware breakpoints from the "breakpoint set" command with the new "--hardware" option. Hardware breakpoints are not a request, they currently are a requirement. So when breakpoints are specified as hardware breakpoints, they might fail to be set when they are able to be resolved and should be used sparingly. This is currently hooked up for GDB remote debugging.
Linux and FreeBSD should quickly enable this feature if possible, or return an error for any breakpoints that are hardware breakpoint sites in the "virtual Error Process::EnableBreakpointSite (BreakpointSite *bp_site);" function.
llvm-svn: 192491
Based on the POSIX x86_64 register context. This is sufficient for opening
a mips64 (big endian) core file. Subsequent changes will connect the
disassembler, dynamic loader support, ABI, etc.
Review: http://llvm-reviews.chandlerc.com/D1873
llvm-svn: 192335
- By default, the above function will wait for at least one event
- Set wait_always=false to make the function return immediately if the process is already stopped
llvm-svn: 192301
Implement SBTarget::CreateValueFromAddress() with a behavior equivalent to SBValue::CreateValueFromAddress()
(but without the need to grab an SBValue first just as a starting point to make up another SBValue out of whole cloth)
llvm-svn: 192239
to be explicit, to prevent horrid things like
std::string a = ConstString("foo")
from taking the path ConstString -> bool -> char
-> std::string.
This fixes, among other things, ClangFunction.
<rdar://problem/15137989>
llvm-svn: 191934
not have breakpoints set on it inserted into code that does have a valid line number. So allow
that line number, and the ThreadPlanStepRange should just continue stepping over 0 line ranges
as if they had the same line number as whatever we were previously stepping through.
llvm-svn: 191477
Now that SBValues can be setup to ignore synthetic values, this is no longer necessary, and so m_suppress_synthetic_value can go away
Another Hack Bites the Dust
llvm-svn: 191338
- searches frames beginning from the current frame, stops when an equivalent context is found
- not using GetStackFrameCount() for performance reasons
- fixes TestInlineStepping (clang/gcc buildbots)
llvm-svn: 190868
with prefer_file_cache == false. This is what we want to do when
the user is doing a disassemble command -- show the actual memory
contents in case the memory has been corrupted or something -- but
when we're profiling functions for stepping or unwinding
(ThreadPlanStepRange::GetInstructionsForAddress,
UnwindAssemblyInstEmulation::GetNonCallSiteUnwindP) we can read
__TEXT instructions directly out of the file, if it exists.
<rdar://problem/14397491>
llvm-svn: 190638
