When lldb is reading a user process corefile, it starts by finding
dyld, then finding the dyld_all_image_infos structure in dyld by
symbol name, then getting the list of loaded binaries. If it fails
to find the structure by name, it can't load binaries. There is
an additional fallback that this patch adds, which is to look for
this object by the section name it is stored in, if the symbol name
lookup fails.
Differential Revision: https://reviews.llvm.org/D140066
rdar://103369931
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
The dynamic linker on Darwin, dyld, can provide status of
the process state for a few significant points early on,
most importantly, when libSystem has been initialized and it
is safe to call functions behind the scenes. Pipe this
information up from debugserver to DynamicLoaderMacOS, for
the DynamicLoader::IsFullyInitialized() method, then have
Thread::SafeToCallFunctions use this information. Finally,
for the two utility functions in the AppleObjCRuntimeV2
LanguageRuntime plugin that I was fixing, call this method
before running our utility functions to collect the list of
objc classes registered in the runtime.
User expressions will still be allowed to run any time -
we assume the user knows what they are doing - but these
two additional utility functions that they are unaware of
will be limited by this state.
Differential Revision: https://reviews.llvm.org/D139054
rdar://102436092
can probably make function calls.
arm64e platforms.
On arm64e-capable Apple platforms, the system libraries are always
arm64e, but applications often are arm64. When a target is created
from file, LLDB recognizes it as an arm64 target, but debugserver will
still (technically correct) report the process as being arm64e. For
consistency, set the target to arm64 here.
rdar://92248684
Differential Revision: https://reviews.llvm.org/D133069
Previously, depending on how you constructed a UUID from data or a
StringRef, an input value of all zeros was valid (e.g. setFromData)
or not (e.g. setFromOptionalData). Since there was no way to tell
which interpretation to use, it was done somewhat inconsistently.
This standardizes the meaning of a UUID of all zeros to Not Valid,
and removes all the Optional methods and their uses, as well as the
static factories that supported them.
Differential Revision: https://reviews.llvm.org/D132191
Resubmission of https://reviews.llvm.org/D130309 with the 2 patches that fixed the linux buildbot, and new windows fixes.
The FileSpec APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossible to control all of the times the FileSpec object is modified so we can clear cached member variables like m_resolved and with an upcoming patch caching if the file is relative or absolute. This patch modifies the APIs of FileSpec so no one can modify the directory or filename instance variables directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130549
This reverts commit 9429b67b8e300e638d7828bbcb95585f85c4df4d.
It broke the build on Windows, see comments on https://reviews.llvm.org/D130309
It also reverts these follow-ups:
Revert "Fix buildbot breakage after https://reviews.llvm.org/D130309."
This reverts commit f959d815f4637890ebbacca379f1c38ab47e4e14.
Revert "Fix buildbot breakage after https://reviews.llvm.org/D130309."
This reverts commit 0bbce7a4c2d2bff622bdadd4323f93f5d90e6d24.
Revert "Cache the value for absolute path in FileSpec."
This reverts commit dabe877248b85b34878e75d5510339325ee087d0.
The FileSpect APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossibly to control all of the times the FileSpec object is modified so we can clear the cache. This patch modifies the APIs of FileSpec so no one can modify the directory or filename directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130309
Using invalidated vector iterator is at best a UB and could crash depending on STL implementation.
Fixing via minimal changes to preserve the existing code style.
Coverity warning 1454828 (scan.coverity.com)
Differential Revision: https://reviews.llvm.org/D130312
As it exists today, Host::SystemLog is used exclusively for error
reporting. With the introduction of diagnostic events, we have a better
way of reporting those. Instead of printing directly to stderr, these
messages now get printed to the debugger's error stream (when using the
default event handler). Alternatively, if someone is listening for these
events, they can decide how to display them, for example in the context
of an IDE such as Xcode.
This change also means we no longer write these messages to the system
log on Darwin. As far as I know, nobody is relying on this, but I think
this is something we could add to the diagnostic event mechanism.
Differential revision: https://reviews.llvm.org/D128480
On macOS, a process will be launched with /usr/lib/dyld (the
dynamic linker) and the main binary by the kernel. The
first thing the standalone dyld will do is call into the dyld
in the shared cache image. This patch tracks the transition
between the dyld's at the very beginning of process startup.
In DynamicLoaderMacOS::NotifyBreakpointHit() there are two new
cases handled:
`dyld_image_dyld_moved` which is the launch /usr/lib/dyld indicating
that it is about call into the shared cache dyld ane evict itself.
lldb will remove the notification breakpoint it set, clear the binary
image list entirely, get the notification function pointer value out
of the dyld_all_image_infos struct (which is the notification fptr
in the to-be-run shared-cache dyld) and put an address breakpoint
there.
`dyld_notify_adding` is then called by shared-cache dyld, and we
detect this case by noticing that we have an empty binary image list,
normally impossibe, and treating this as if we'd just started a
process attach/launch.
Differential Revision: https://reviews.llvm.org/D127247
rdar://84222158
Currently, all data buffers are assumed to be writable. This is a
problem on macOS where it's not allowed to load unsigned binaries in
memory as writable. To be more precise, MAP_RESILIENT_CODESIGN and
MAP_RESILIENT_MEDIA need to be set for mapped (unsigned) binaries on our
platform.
Binaries are mapped through FileSystem::CreateDataBuffer which returns a
DataBufferLLVM. The latter is backed by a llvm::WritableMemoryBuffer
because every DataBuffer in LLDB is considered to be writable. In order
to use a read-only llvm::MemoryBuffer I had to split our abstraction
around it.
This patch distinguishes between a DataBuffer (read-only) and
WritableDataBuffer (read-write) and updates LLDB to use the appropriate
one.
rdar://74890607
Differential revision: https://reviews.llvm.org/D122856
Report warnings and errors through events instead of printing directly
the to the debugger's error stream. By using events, IDEs such as Xcode
can report these issues in the UI instead of having them show up in the
debugger console.
The new diagnostic events are handled by the default event loop. If a
diagnostic is reported while nobody is listening for the new event
types, it is printed directly to the debugger's error stream.
Differential revision: https://reviews.llvm.org/D121511
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
When debugging a Simulator process on macOS (e.g. the iPhone simulator),
the process will have both a dyld, and a dyld_sim present. The dyld_sim
is an iOS Simulator binary. The dyld is a macOS binary. Both are
MH_DYLINKER filetypes. lldb needs to identify & set a breakpoint in
dyld, so it has to distinguish between these two.
Previously lldb was checking if the inferior target was x86 (indicating
macOS) and the OS of the MH_DYLINKER binary was iOS/watchOS/etc -- if
so, then this is dyld_sim and we should ignore it. Now with arm64
macOS systems, this check was invalid, and we would set our breakpoint
for new binaries being loaded in dyld_sim, causing binary loading to
be missed by lldb.
This patch uses the Target's ArchSpec triple environment, to see if
this process is a simulator process. If this is a Simulator process,
then we only recognize a MH_DYLINKER binary with OS type macOS as
being dyld.
This patch also removes some code that handled pre-2016 era debugservers
which didn't give us the OS type for each binary. This was only being
used on macOS, where we don't need to handle the presence of very old
debugservers.
Differential Revision: https://reviews.llvm.org/D115001
rdar://85907839
There is no reason why this function should be returning a ConstString.
While modifying these files, I also fixed several instances where
GetPluginName and GetPluginNameStatic were returning different strings.
I am not changing the return type of GetPluginNameStatic in this patch, as that
would necessitate additional changes, and this patch is big enough as it is.
Differential Revision: https://reviews.llvm.org/D111877
When DynamicLoaderMacOS::SetNotificationBreakpoint sets the breakpoint
for new binaries being loaded/unloaded, it limits the scope of that
breakpoint to just dyld, so we don't re-evaluate the breakpoint for
every new binary loaded. I wrote this to get the module's ObjectFile
FileSpec in an earlier change, but this is not correct. If lldb
is debugging a remote system, and it had to read dyld out of memory
from the remote system, it will have no FileSpec on the lldb debugger
host. We need to grab the Module's FileSpec, which in this case is
actually falling back to the PlatformFileSpec, the binary path on the
target system.
rdar://84199646
In all these years, we haven't found a use for this function (it has
zero callers). Lets just remove the boilerplate.
Differential Revision: https://reviews.llvm.org/D109600
In macOS 12, the symbol name for the dyld_all_image_infos struct
in dyld has a namespace qualifier. Search for it without qualification,
then with qualification when doing a by-name search. (lldb will
only search for it by name when loading a user process Mach-O corefile)
rdar://76270013
This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix
This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.
Differential revision: https://reviews.llvm.org/D103483
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
Instead of looking up a symbol and reducing it to an addr_t to set
a breakpoint, set the breakpoint on the function name directly.
The old Mac OS X dynamic loader plugin worked in terms of addresses
and I incorrectly emulated that here when I wrote this newer one.
Differential Revision: https://reviews.llvm.org/D100931
Commiting this patch for Augusto Noronha who is getting set
up still.
This patch changes Target::ReadMemory so the default behavior
when a read is in a Section that is read-only is to fetch the
data from the local binary image, instead of reading it from
memory. Update all callers to use their old preferences
(the old prefer_file_cache bool) using the new API; we should
revisit these calls and see if they really intend to read
live memory, or if reading from a read-only Section would be
equivalent and important for performance-sensitive cases.
rdar://30634422
Differential revision: https://reviews.llvm.org/D100338
On Darwin based systems, lldb will get notified by dyld before it itself
finished initializing, at which point it's not safe to call certain APIs
or SPIs. Add a method to the DynamicLoader to query that.
Differential revision: https://reviews.llvm.org/D99314
The comment for ValueType claims that all values <1 are errors, but
not all switch statements take this into account. This patch
introduces an explicit Error case and deletes all default: cases, so
we get warned about incomplete switch coverage.
https://reviews.llvm.org/D96537
Replace uses of GetModuleAtIndexUnlocked and
GetModulePointerAtIndexUnlocked with the ModuleIterable and
ModuleIterableNoLocking where applicable.
Differential revision: https://reviews.llvm.org/D94271
This is a polymorphic class, copying it is a bad idea.
This was not a problem because most classes inheriting from it were
deleting their copy operations themselves. However, this enables us to
delete those explicit deletions, and ensure noone forgets to add them in
the future.
Summary:
When we try to find the executable module for our target we don't check
if we already have an executable module set. This causes that when debugging
a program that dlopens another executable, LLDB will take that other executable
as the new executable of the target (which causes that future launches of the
target will launch the dlopen'd executable instead of the original executable).
This just adds a check that we only set the executable when we haven't already
found one.
Fixes rdar://63443099
Reviewers: jasonmolenda, jingham, teemperor
Reviewed By: jasonmolenda, teemperor
Subscribers: jingham, JDevlieghere
Differential Revision: https://reviews.llvm.org/D80724
Summary:
On macOS 11, the libraries that have been integrated in the system
shared cache are not present on the filesystem anymore. LLDB was
using those files to get access to the symbols of those libraries.
LLDB can get the images from the target process memory though.
This has 2 consequences:
- LLDB cannot load the images before the process starts, reporting
an error if someone tries to break on a system symbol.
- Loading the symbols by downloading the data from the inferior
is super slow. It takes tens of seconds at the start of the
debug session to populate the Module list.
To fix this, we can use the library images LLDB has in its own
mapping of the shared cache. Shared cache images are somewhat
special as their LINKEDIT segment is moved to the end of the cache
and thus the images are not contiguous in memory. All of this can
hidden in ObjectFileMachO.
This patch fixes a number of test failures on macOS 11 due to the
first problem described above and adds some specific unittesting
for the new SharedCache Host utilities.
Reviewers: jasonmolenda, labath
Subscribers: llvm-commits, lldb-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D83023
This reverts commit 0da0437b2afbd8ebef6b11f114cca33b118e7639 to unbreak
the following tests:
lldb-api.tools/lldb-server.TestAppleSimulatorOSType.py
lldb-api.tools/lldb-server.TestGdbRemoteAttach.py
lldb-api.tools/lldb-server.TestGdbRemoteProcessInfo.py
lldb-api.tools/lldb-server.TestGdbRemoteRegisterState.py
lldb-api.tools/lldb-server.TestGdbRemoteThreadsInStopReply.py
lldb-api.tools/lldb-server.TestLldbGdbServer.py
debugserver and lldb
This patch improves the heuristics for correctly identifying simulator binaries on Darwin and adds support for simulators running on Apple Silicon.
rdar://problem/64046344
Differential Revision: https://reviews.llvm.org/D82616
LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.
Differential revision: https://reviews.llvm.org/D74743
Move the logic for initialization and termination for DynamicLoaderMacOS
into DynamicLoaderMacOSXDYLD so that there's one initializer for the
DynamicLoaderMacOSXDYLD plugin.
This is a step towards making the initialize and terminate calls be
generated by CMake, which in turn is towards making it possible to
disable plugins at configuration time.
Differential revision: https://reviews.llvm.org/D74245
Summary:
This change represents the move of ClangASTImporter, ClangASTMetadata,
ClangExternalASTSourceCallbacks, ClangUtil, CxxModuleHandler, and
TypeSystemClang from lldbSource to lldbPluginExpressionParserClang.h
This explicitly removes knowledge of clang internals from lldbSymbol,
moving towards a more generic core implementation of lldb.
Reviewers: JDevlieghere, davide, aprantl, teemperor, clayborg, labath, jingham, shafik
Subscribers: emaste, mgorny, arphaman, jfb, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73661
