This should fix the issues introduced by d71d1a9, which skipped all the
test setup commands.
This also fixes the test failures happening in TestAutosuggestion.py.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
When the terminal window is too small, lldb would wrap progress messages
accross multiple lines which would break the progress event handling
code that is supposed to clear the message once the progress is completed.
This causes the progress message to remain on the screen, sometimes partially,
which can be confusing for the user.
To fix this issue, this patch trims the progress message to the terminal
width taking into account the progress counter leading the message for
finite progress events and also the trailing `...`.
rdar://91993836
Differential Revision: https://reviews.llvm.org/D124785
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
should not receive as exceptions (some will get converted to BSD
signals instead). This is really the only stable way to ensure that
a Mach exception gets converted to it's equivalent BSD signal. For
programs that rely on BSD signal handlers, this has to happen or you
can't even get the program to invoke the signal handler when under
the debugger.
This builds on a previous solution to this problem which required you
start debugserver with the -U flag. This was not very discoverable
and required lldb be the one to launch debugserver, which is not always
the case.
Differential Revision: https://reviews.llvm.org/D125434
This does 2 things:
* Moves it after the short options. Which makes sense given it's
a niche, default off option.
(if 2 files for one option seems a bit much, I am going to reuse
them for "memory find" later)
* Fixes the use of repeated commands. For example:
memory read buf --show-tags
<shows tags>
memory read
<shows tags>
Added tests for the repetition and updated existing help tests.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D125089
Previously if you read a code/data mask before there was a valid thread
you would get the top byte mask. This meant the value was "valid" as in,
don't read it again.
When using a corefile we ask for the data mask very early on and this
meant that later once you did have a thread it wouldn't read the
register to get the rest of the mask.
This fixes that and adds a corefile test generated from the same program
as in my previous change on this theme.
Depends on D118794
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D122411
Non-address bits are not part of the virtual address in a pointer.
So they must be removed before passing to interfaces like ptrace.
Some of them we get way with not removing, like AArch64's top byte.
However this is only because of a hardware feature that ignores them.
This change updates all the Process/Target Read/Write memory methods
to remove non-address bits before using addresses.
Doing it in this way keeps lldb-server simple and also fixes the
memory caching when differently tagged pointers for the same location
are read.
Removing the bits is done at the ReadMemory level not DoReadMemory
because particualrly for process, many subclasses override DoReadMemory.
Tests have been added for read/write at the command and API level,
for process and target. This includes variants like
Read<sometype>FromMemory. Commands are tested to make sure we remove
at the command and API level.
"memory find" is not included because:
* There is no API for it.
* It already has its own address handling tests.
Software breakpoints do use these methods but they are not tested
here because there are bigger issues to fix with those. This will
happen in another change.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D118794
This adds an option to the memory region command
to print all regions at once. Like you can do by
starting at address 0 and repeating the command
manually.
memory region [-a] [<address-expression>]
(lldb) memory region --all
[0x0000000000000000-0x0000000000400000) ---
[0x0000000000400000-0x0000000000401000) r-x <...>/a.out PT_LOAD[0]
<...>
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
[0x0001000000000000-0xffffffffffffffff) ---
The output matches exactly what you'd get from
repeating the command. Including that it shows
unmapped areas between the mapped regions.
(this is why Process GetMemoryRegions is not
used, that skips unmapped areas)
Help text has been updated to show that you can have
an address or --all but not both.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D111791
This diffs implements per-core tracing on lldb-server. It also includes tests that ensure that tracing can be initiated from the client and that the jLLDBGetState ppacket returns the list of trace buffers per core.
This doesn't include any decoder changes.
Finally, this makes some little changes here and there improving the existing code.
A specific piece of code that can't reliably be tested is when tracing
per core fails due to permissions. In this case we add a
troubleshooting message and this is the manual test:
```
/proc/sys/kernel/perf_event_paranoid set to 1
(lldb) process trace start --per-core-tracing error: perf event syscall failed: Permission denied
You might need that /proc/sys/kernel/perf_event_paranoid has a value of 0 or -1.
``
Differential Revision: https://reviews.llvm.org/D124858
string points to unaccessible memory.
The formatter tries to get the data field of the std::string, and to
check whether that fails it just checks that the ValueObjectSP
returned is not empty. But we never return empty ValueObjectSP's to
indicate failure, since doing so would lose the Error object that
tells you why fetching the ValueObject failed.
This patch adds a check for ValueObject::GetError().Success().
I also added a test case for this failure, and reworked the test case
a bit (to use run_to_source_breakpoint). I also renamed a couple of
single letter locals which don't follow the lldb coding conventions.
Differential Revision: https://reviews.llvm.org/D108228
This patch renames the `SBCompileUnit::GetIndexForLineEntry` api to be
an overload of `SBCompileUnit::FindLineEntryIndex`
Differential Revision: https://reviews.llvm.org/D125594
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Following 8b9caad8eb449c1dc4df13e566a5f6c59de9be7c, this only skips
TestCppIncompleteTypeMembers.py on macOS if we test with `-gmodules` enabled.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
a debug session with only a remote path to the file you are debugging
using the SB API's. This patch makes it possible to do this using
target create --remote-file <some_path> without supplying a local file
as well.
Prior to this change we errored out saying that we haven't implemented
copying the binary back from the remote. I didn't implement the copy
back (in the case I'm interested in - iOS debugging - we don't
actually have a way for lldb to do that). This patch doesn't impede
doing that, I just didn't need it. I think for some object file
formats debugging w/o the binary file is hard because of what doesn't
get mapped in. I didn't try to arbitrate that, I'm assuming anybody
who has to do this knows what they are going to get.
If there's a connected platform that can check that the remote file
exists, it will do so, otherwise we trust the user's input - if it
isn't there the process launch is going to fail with no-such-file so
it will be pretty clear what went wrong.
Differential Revision: https://reviews.llvm.org/D124947
This skips `TestCppIncompleteTypeMembers.py` on Darwin platforms since
it requires `-flimit-debug-info` which is not supported.
This should fix the Green Dragon bot test run:
https://green.lab.llvm.org/green/job/lldb-cmake/43678
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds a new `GetIndexForLineEntry` method to the `SBCompileUnit`
class. As the name suggests, given an `SBLineEntry` object, this will
return the line entry index within a specific compile unit.
This method can take a `exact` boolean that will make sure that the
provided line entry matches perfectly another line entry in the compile unit.
rdar://47450887
Differention Revision: https://reviews.llvm.org/D125437
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
symbol name matches. Instead, we extract the incoming path's base
name, look up all the symbols with that base name, and then compare
the rest of the context that the user provided to make sure it
matches. However, we do this comparison using just a strstr. So for
instance:
break set -n foo::bar
will match not only "a::foo::bar" but "notherfoo::bar". The former is
pretty clearly the user's intent, but I don't think the latter is, and
results in breakpoints picking up too many matches.
This change adds a Language::DemangledNameContainsPath API which can
do a language aware match against the path provided. If the language
doesn't provide this we fall back to the strstr (though that's changed
to StringRef::contains in the patch).
Differential Revision: https://reviews.llvm.org/D124579
Prior to this fix if we have a really large array or collection class, we would end up always creating all of the child variables for an array or collection class. If the number of children was very high this can cause delays when expanding variables. By adding the "indexedVariables" to variables with lots of children, we can keep good performance in the variables view at all times. This patch will add the "indexedVariables" key/value pair to any "Variable" JSON dictionairies when we have an array of synthetic child provider that will create more than 100 children.
We have to be careful to not call "uint32_t SBValue::GetNumChildren()" on any lldb::SBValue that we use because it can cause a class, struct or union to complete the type in order to be able to properly tell us how many children it has and this can be expensive if you have a lot of variables. By default LLDB won't need to complete a type if we have variables that are classes, structs or unions unless the user expands the variable in the variable view. So we try to only get the GetNumChildren() when we have an array, as this is a cheap operation, or a synthetic child provider, most of which are for showing collections that typically fall into this category. We add a variable reference, which indicates that something can be expanded, when the function "bool SBValue::MightHaveChildren()" is true as this call doesn't need to complete the type in order to return true. This way if no one ever expands class variables, we don't need to complete the type.
Differential Revision: https://reviews.llvm.org/D125347
A previous commit enabled LLDB to be able to debug a program launched via ld: https://reviews.llvm.org/D108061.
This commit adds the ability to debug a program launched via ld when it happens during an exec into the dynamic loader. There was an issue where after the exec we would locate the rendezvous structure right away but it didn't contain any valid values and we would try to set the dyanamic loader breakpoint at address zero. This patch fixes that and adds a test.
Differential Revision: https://reviews.llvm.org/D125253
This updates the documentation of the gdb-remote protocol, as well as the help messages, to include the new --per-core-tracing option.
Differential Revision: https://reviews.llvm.org/D124640
IIUC, the purpose of CopyUniqueClassMethodTypes is to link together
class definitions in two compile units so that we only have a single
definition of a class. It does this by adding entries to the die_to_type
and die_to_decl_ctx maps.
However, the direction of the linking seems to be reversed. It is taking
entries from the class that has not yet been parsed, and copying them to
the class which has been parsed already -- i.e., it is a very
complicated no-op.
Changing the linking order allows us to revert the changes in D13224
(while keeping the associated test case passing), and is sufficient to
fix PR54761, which was caused by an undesired interaction with that
patch.
Differential Revision: https://reviews.llvm.org/D124370
This adds a few targeted tests to make sure that when refactoring
this function later I don't break these properties.
Some are tested in passing elsewhere but this makes it more
obvious what went wrong when it fails.
This doesn't cover everything the function does, I couldn't
find any examples that would exercise some of the code.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D123500
This reverts commit f114f009486816ed4b3bf984f0fbbb8fc80914f6.
Due to hitting an assert on our lldb bots:
https://lab.llvm.org/buildbot/#/builders/96/builds/22715
../llvm-project/lldb/source/Plugins/Process/elf-core/ThreadElfCore.cpp:170:
virtual lldb::RegisterContextSP ThreadElfCore::CreateRegisterContextForFrame(
lldb_private::StackFrame *): Assertion `false && "Architecture or OS not supported"' failed.
Currently, ppc64le and ppc64 (defaulting to big endian) have the same
descriptor, thus the linear scan always return ppc64le. Handle that through
subtype.
Differential Revision: https://reviews.llvm.org/D124760
Skip on linux+arm for now until I can try to repo the setup of the
lldb-arm-ubuntu bot. The name of the binary in argv[0] was not
able to be retrieved here; if the compiler's codegen had it stored
in a caller saved register, because it's not needed at this point,
it may not be retreivable.
When looking for a variable location in a DWARF location list,
we search the list of ranges to find one that includes the pc.
With a function mid-stack, the "pc" is the return pc instead of
the call instruction, and in optimized code this can be another
function or a different basic block (with different variable
locations). Back up the "pc" value mid-stack to find the correct
location list entry.
Differential Revision: https://reviews.llvm.org/D124597
rdar://63903416
We dropped downstream support for Python 2 in the previous release. Now
that we have branched for the next release the window where this kind of
change could introduce conflicts is closing too. Remove Python 2 checks
from the test suite.
Differential revision: https://reviews.llvm.org/D124429
The test was broken (in the sense that it was not testing what it was
supposed to test) in two ways:
- a Makefile refactor caused it to stop being built with
-flimit-debug-info
- clang's constructor homing changed the "home" of the type
This patch fixes the Makefile, and modifies the source code to produce
the same result with both type homing strategies. Due to constructor
homing I had to use a different implicitly-defined function for the test
-- I chose the assignment operator.
I also added some sanity checks to the test to ensure that the test is
indeed operating on limited debug info.
The last fix missed an import in one test file causing skipIfWindows attribute
can't be recognized.
I feel embarrassed to miss it. I have run all tests on Mac to make sure them
passing in this patch.
Differential Revision: https://reviews.llvm.org/D124479
Symbol on-demand feature is never tested on Windows so it is not a surprise
that we are getting Buildbot failure from Windows:
https://lab.llvm.org/buildbot/#/builders/83/builds/18228
This patch disables symbol on-demand feature on Windows. I will find a Windows
machine to test and re-enable symbol on-demand feature as follow-up.
Differential Revision: https://reviews.llvm.org/D124471
This diff introduces a new symbol on-demand which skips
loading a module's debug info unless explicitly asked on
demand. This provides significant performance improvement
for application with dynamic linking mode which has large
number of modules.
The feature can be turned on with:
"settings set symbols.load-on-demand true"
The feature works by creating a new SymbolFileOnDemand class for
each module which wraps the actual SymbolFIle subclass as member
variable. By default, most virtual methods on SymbolFileOnDemand are
skipped so that it looks like there is no debug info for that module.
But once the module's debug info is explicitly requested to
be enabled (in the conditions mentioned below) SymbolFileOnDemand
will allow all methods to pass through and forward to the actual SymbolFile
which would hydrate module's debug info on-demand.
In an internal benchmark, we are seeing more than 95% improvement
for a 3000 modules application.
Currently we are providing several ways to on demand hydrate
a module's debug info:
* Source line breakpoint: matching in supported files
* Stack trace: resolving symbol context for an address
* Symbolic breakpoint: symbol table match guided promotion
* Global variable: symbol table match guided promotion
In all above situations the module's debug info will be on-demand
parsed and indexed.
Some follow-ups for this feature:
* Add a command that allows users to load debug info explicitly while using a
new or existing command when this feature is enabled
* Add settings for "never load any of these executables in Symbols On Demand"
that takes a list of globs
* Add settings for "always load the the debug info for executables in Symbols
On Demand" that takes a list of globs
* Add a new column in "image list" that shows up by default when Symbols On
Demand is enable to show the status for each shlib like "not enabled for
this", "debug info off" and "debug info on" (with a single character to
short string, not the ones I just typed)
Differential Revision: https://reviews.llvm.org/D121631
A trace might contain events traced during the target's execution. For
example, a thread might be paused for some period of time due to context
switches or breakpoints, which actually force a context switch. Not only
that, a trace might be paused because the CPU decides to trace only a
specific part of the target, like the address filtering provided by
intel pt, which will cause pause events. Besides this case, other kinds
of events might exist.
This patch adds the method `TraceCursor::GetEvents()`` that returns the
list of events that happened right before the instruction being pointed
at by the cursor. Some refactors were done to make this change simpler.
Besides this new API, the instruction dumper now supports the -e flag
which shows pause events, like in the following example, where pauses
happened due to breakpoints.
```
thread #1: tid = 2717361
a.out`main + 20 at main.cpp:27:20
0: 0x00000000004023d9 leaq -0x1200(%rbp), %rax
[paused]
1: 0x00000000004023e0 movq %rax, %rdi
[paused]
2: 0x00000000004023e3 callq 0x403a62 ; std::vector<int, std::allocator<int> >::vector at stl_vector.h:391:7
a.out`std::vector<int, std::allocator<int> >::vector() at stl_vector.h:391:7
3: 0x0000000000403a62 pushq %rbp
4: 0x0000000000403a63 movq %rsp, %rbp
```
The `dump info` command has also been updated and now it shows the
number of instructions that have associated events.
Differential Revision: https://reviews.llvm.org/D123982
Given that you'd never find empty string, just error.
Also add a test that an invalid expr generates an error.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D123793
This changes the decorator helper `_match_decorator_property` to
consider `None` as the actual value as not a match. Using `None` for the
pattern continues to be considered a match.
I discovered the issue because marking a test as NO_DEBUG_INFO_TESTCASE
will cause the call to `self.getDebugInfo()` to return `None` and
incorrectly skip or XFAIL the corresponding test.
I used the above scenario to create a test for the decorators.
Differential revision: https://reviews.llvm.org/D123401
This patch moves the platform creation and selection logic into the
per-debugger platform lists. I've tried to keep functional changes to a
minimum -- the main (only) observable difference in this change is that
APIs, which select a platform by name (e.g.,
Debugger::SetCurrentPlatform) will not automatically pick up a platform
associated with another debugger (or no debugger at all).
I've also added several tests for this functionality -- one of the
pleasant consequences of the debugger isolation is that it is now
possible to test the platform selection and creation logic.
This is a product of the discussion at
<https://discourse.llvm.org/t/multiple-platforms-with-the-same-name/59594>.
Differential Revision: https://reviews.llvm.org/D120810
I'm adding two new classes that can be used to measure the duration of long
tasks as process and thread level, e.g. decoding, fetching data from
lldb-server, etc. In this first patch, I'm using it to measure the time it takes
to decode each thread, which is printed out with the `dump info` command. In a
later patch I'll start adding process-level tasks and I might move these
classes to the upper Trace level, instead of having them in the intel-pt
plugin. I might need to do that anyway in the future when we have to
measure HTR. For now, I want to keep the impact of this change minimal.
With it, I was able to generate the following info of a very big trace:
```
(lldb) thread trace dump info Trace technology: intel-pt
thread #1: tid = 616081
Total number of instructions: 9729366
Memory usage:
Raw trace size: 1024 KiB
Total approximate memory usage (excluding raw trace): 123517.34 KiB
Average memory usage per instruction (excluding raw trace): 13.00 bytes
Timing:
Decoding instructions: 1.62s
Errors:
Number of TSC decoding errors: 0
```
As seen above, it took 1.62 seconds to decode 9.7M instructions. This is great
news, as we don't need to do any optimization work in this area.
Differential Revision: https://reviews.llvm.org/D123357
Places calling LoadModuleAtAddress() already call ModulesDidLoad()
after a loop calling LoadModuleAtAddress(), so it's not necessary
to call it from there, and the batched ModulesDidLoad() may be
more efficient than this place calling it one after one.
This also makes the ModuleLoadedNotifys test pass on Linux now that
the duplicates no longer bring down the average of modules notified
per call.
Differential Revision: https://reviews.llvm.org/D123128
(With C++ exceptions, `clang++ --target=mips64{,el}-linux-gnu -fpie -pie
-fuse-ld=lld` has link errors (lld does not implement some strange R_MIPS_64
.eh_frame handling in GNU ld). However, sanitizer-x86_64-linux-qemu used this to
build ScudoUnitTests. Pined ScudoUnitTests to -no-pie.)
Default the option introduced in D113372 to ON to match all(?) major Linux
distros. This matches GCC and improves consistency with Android and linux-musl
which always default to PIE.
Note: CLANG_DEFAULT_PIE_ON_LINUX may be removed in the future.
Differential Revision: https://reviews.llvm.org/D120305
