These two functions are doing the same thing, only one of them is
sending the packets immediately and the other "queues" them to be sent
later. The first one is better as in case of errors, the backtrace will
point straight to the place that caused them.
Modify the first method to avoid duplication, and ten standardize on it.
This test is flakey because it tries to read the proc/smaps
file of the first lldb-server process it finds. This process
can finish before we finish doing that.
http://lab.llvm.org:8011/#/builders/96/builds/6634/steps/6/logs/stdio
For now limit this to MTE targets which basically means
QEMU via lldb-dotest, which doesn't have this issue.
I'll fix the race condition shortly.
The annotation is now (since the introduction of @apple_simulator_test)
redundant, and the test could theoretically run on lldb-server too (if
it supported darwin hosts).
These tests fail if you build without the x86 llvm backend.
Either because they use an x86 triple or try to backtrace which
requires some x86 knowledge to see all frames.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D100194
This commit has caused the following tests to be flaky:
TestThreadSpecificBpPlusCondition.py
TestExitDuringExpression.py
The exact cause is not known yet, but since both tests deal with
threads, my guess is it has something to do with the tracking of
creation of new threads (which the commit touches upon).
This reverts the following commits:
d01bff8cbdc98fb8751f7bf10af19b47ae5c445d,
ba62ebc48e8c424ce3a78ba01acda679d536dd47,
e761b6b4c58d4f7ae1073d925d7cb321d68ee93a,
a345419ee03095c8cdfbe1c2728467c4da8fa0a4.
The core file used is built for i386 so we
need the x86 backend to be able to load it.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D100195
Previously the test would fail if you built on Arm/AArch64
but did not have the x86 llvm backend enabled.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D100192
When LLDB's DWARF parser is parsing the member DIEs of a struct/class it
currently fully resolves the types of static member variables in a class before
adding the respective `VarDecl` to the record.
For record types fully resolving the type will also parse the member DIEs of the
respective class. The other way of resolving is just 'forward' resolving the type
which will try to load only the minimum amount of information about the type
(for records that would only be the name/kind of the type). Usually we always
resolve types on-demand so it's rarely useful to speculatively fully resolve
them on the first use.
This patch changes makes that we only 'forward' resolve the types of static
members. This solves the fact that LLDB unnecessarily loads debug information
to parse the type if it's maybe not needed later and it also avoids a crash where
the parsed type might in turn reference the surrounding class that is currently
being parsed.
The new test case demonstrates the crash that might happen. The crash happens
with the following steps:
1. We parse class `ToLayout` and it's members.
2. We parse the static class member and fully resolve its type
(`DependsOnParam2<ToLayout>`).
3. That type has a non-static class member `DependsOnParam1<ToLayout>` for which
LLDB will try to calculate the size.
4. The layout (and size)`DependsOnParam1<ToLayout>` turns depends on the
`ToLayout` size/layout.
5. Clang will calculate the record layout/size for `ToLayout` even though we are
currently parsing it and it's missing it's non-static member.
The created is missing the offset for the yet unparsed non-static member. If we
later try to get the offset we end up hitting different asserts. Most common is
the one in `TypeSystemClang::DumpValue` where it checks that the record layout
has offsets for the current FieldDecl.
```
assert(field_idx < record_layout.getFieldCount());
```
Fixed rdar://67910011
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D100180
Watch for fork(2)/vfork(2) (also fork/vfork-style clone(2) on Linux)
notifications and explicitly detach the forked child process, and add
initial tests for these cases. The code covers FreeBSD, Linux
and NetBSD process plugins. There is no new user-visible functionality
provided -- this change lays foundations over subsequent work on fork
support.
Differential Revision: https://reviews.llvm.org/D98822
Add a minimal support for the multiprocess extension in gdb-remote
client. It accepts PIDs as part of thread-ids, and rejects PIDs that
do not match the current inferior.
Differential Revision: https://reviews.llvm.org/D99603
A little cleanup to how these firmware corefile tests are done; add
a test that loads a dSYM that loads an OS plugin, and confirm that
the OS plugin's threads are created.
When looking up user specified formatters qualifiers are removed from types before matching,
I have added a clarifying example to the document and added an example to a relevant test to demonstrate this behavior.
Differential Revision: https://reviews.llvm.org/D99827
An empty history entry can happen by entering the expression evaluator an immediately hitting enter:
```
$ lldb
(lldb) e
Enter expressions, then terminate with an empty line to evaluate:
1: <hit enter>
```
The next time the user enters the expression evaluator, if they hit the up arrow to load the previous expression, lldb crashes. This patch treats empty history sessions as a single expression of zero length, instead of an empty list of expressions.
Fixes http://llvm.org/PR49845.
Differential Revision: https://reviews.llvm.org/D100048
The memory read --outfile command should truncate the output when unless
--append-outfile. Fix the bug and add a test.
rdar://76062318
Differential revision: https://reviews.llvm.org/D99890
This reverts commit 602ab188a7e18b97d9af95e17271e8fbee129081.
The patch replicated an lldbassert for a certain type of NSNumber for tagged
pointers. This really shouldn't be an assert since we don't do anything wrong
with these numbers, we just don't print a summary. So this patch changed the
lldbassert to a log message in reverting the revert.
When referencing `NSObject`, it's enough to import `objc/NSObject.h`. Importing `Foundation` is unnecessary in these cases.
Differential Revision: https://reviews.llvm.org/D99867
Use `@import ObjectiveC` instead of `@import Foundation`, as the former is all
that's needed, and results in fewer clang modules being built.
This results in the following clang modules *not* being built for this test.
ApplicationServices
CFNetwork
ColorSync
CoreFoundation
CoreGraphics
CoreServices
CoreText
DiskArbitration
Dispatch
Foundation
IOKit
ImageIO
Security
XPC
_Builtin_intrinsics
launch
libkern
os_object
os_workgroup
Differential Revision: https://reviews.llvm.org/D99859
This reverts commit 4d9039c8dc2d1f0be1b5ee486d5a83b1614b038a.
This is causing the greendragon bots to fail most of the time when
running TestNSDictionarySynthetic.py. Reverting until Jim has a chance
to look at this on Monday. Running the commands from that test from
the command line, it fails 10-13% of the time on my desktop.
This is a revert of Jim's changes in https://reviews.llvm.org/D99694
Fill out ProcessMachCore::DoLoadCore to handle LC_NOTE hints with
a UUID or with a UUID+address, and load the binary at the specified
offset correctly. Add tests for all four combinations. Change
DynamicLoaderStatic to not re-set a Section's load address in the
Target if it's already been specified.
Differential Revision: https://reviews.llvm.org/D99571
rdar://51490545
The ObjC runtime offers both signed & unsigned tagged pointer value
accessors to tagged pointer providers, but lldb's tagged pointer
code only implemented the unsigned one. This patch adds an
emulation of the signed one.
The motivation for doing this is that NSNumbers use the signed
accessor (they are always signed) and we need to follow that in our
summary provider or we will get incorrect values for negative
NSNumbers.
The data-formatter-objc test file had NSNumber examples (along with lots of other
goodies) but the NSNumber values weren't tested. So I also added
checks for those values to the test.
I also did a quick audit of the other types in that main.m file, and
it looks like pretty much all the other values are either intermediates
or are tested.
Differential Revision: https://reviews.llvm.org/D99694
and probably other posix oses. Use extra_images to ensure
LD_LIBRARY_PATH is set correctly.
Also take the opportunity to remove hand-rolled library extension
management code in favor of the existing one.
The test uses debug info from one binary to debug a different one. This
does not work on macos, and its pure luck that it works elsewhere (the
variable that it inspects happens to have the same address in both).
The purpose of this test is to verify that lldb has not overwritten the
target executable. That can be more easily achieved by checking the exit
code of the binary, so change the test to do that.
Also remove the llgs_test decorator, as it's preventing the test from
running on macos. All the test needs is the platform functionality of
lldb-server, which is available everywhere.
This fixes flakiness in TestVSCode_launch.test_progress_events
vscode.progress_events some times failed to populate in time for
follow up iterations.
Adding a minor delay before the the for the loop fixes the issue.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D99497
Remove the remaining references to LLDB_CAPTURE_REPRODUCER. I removed
the functionality in an earlier commit but forgot that there was a
corresponding test and logic to unset it in our test suite.
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
This patch adds a test case to test AArch64 dynamic register sets.
This tests for the availability of certain register sets and query
their registers accordingly.
Reviewed By: labath, DavidSpickett
Differential Revision: https://reviews.llvm.org/D96463
This patch fixes an issue, where if the thread has a signal blocked when
we try to inject it into the process (via vCont), then instead of
executing straight away, the injected signal will trigger another stop
when the thread unblocks the signal.
As (linux) threads start their life with SIGUSR1 (among others)
disabled, and only enable it during initialization, injecting the signal
during this window did not behave as expected. The fix is to change the
test to ensure the signal gets injected with the signal unblocked.
The simplest way to do this was to write a dedicated inferior for this
test. I also created a new header to factor out the function retrieving
the (os-specific) thread id.
As discussed on lldb-dev
<https://lists.llvm.org/pipermail/lldb-dev/2021-March/016777.html> the
mips code is unmaintained and untested. It also carries a lot of
technical debt which is not limited to mips-specific code.
Generic mips support remains (and is going to be used by the upcoming
freebsd code). Resurrecting mips support should be a matter of re-adding
the relevant register context files (while avoiding reintroducing the
debt).
Add a minimal support for the multiprocess extension in lldb-server.
The server indicates support for it via qSupported, and accepts
thread-ids containing a PID. However, it still does not support
debugging more than one inferior, so any other PID value results
in an error.
Differential Revision: https://reviews.llvm.org/D98482
TestVSCode_disconnect.test_launch fails with clean up error because
disconnect gets called twice once from the test case and once from
the tear down hook.
This patch disables disconnect after its been called from test_launch
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D99491
This is apparently allowed in Objective-C so we should test this in LLDB.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D99513
This is an LLDB test for the ASTImporter crash that got fixed in D99077.
The test is using Clang modules for the properties as it seems the conflicting
names are not actually correctly handled when generating debug information
(only the first property is emitted and the second one is ignored in the current
clang ToT).
