This reduces the size of VPlan.h and avoids future growth of the file
when the graph traits are extended in future patches.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D140500
Add and run VPlan transform to fold blocks with a single predecessor
into the predecessor. This remove redundant blocks and addresses a TODO
to replace special handling for the vector latch VPBB.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D139927
This sets the stage for D133017 by moving out the code that performs
VPlan based simplifications to a separate transform that takes the
chosen VF & UF as arguments.
The main advantage is that this transform runs before any changes to
the CFG are being made. This allows using SCEV without worrying about
making queries while the IR is in an incomplete state.
Note that this patch switches the reasoning to use SCEV, but still only
simplifies loops with constant trip counts. Using SCEV here is needed to
access the backedge taken count, because the trip count IR value has not
been created yet.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D135017
Explicitly track the UFs supported in a VPlan. This is needed to
allow transformations to restrict the UFs which are supported.
Discussed as separate improvement in D135017.
The VFs and UFs may be more constrained as the plans are transformed
(e.g. see D135017 for an example).
To make sure the VFs/UFs included in the VPlan dump are accurate,
generate them when accessing a plan's name, rather than include them in
the name string set after initial construction.
Code generation now uses the start VPValue of induction recipes.
This makes it possible to adjust the start value of the epilogue
vector loop to use the 'resume' value of the main vector loop.
Fixes#59459.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D92132
Add a VP_CLASSOF_IMPL macro to define common classof implementations for
recipes. This reduces duplication and also adds missing implementations
to existing recipes.
In scalar plans, replicate recipes will only generate a single value per
UF, independent of whether they are uniform or not. So don't consider
uniformity for plans with scalar VFs only.
This allows us to handle a few additional cases in VPlan sinking instead
of non-VPlan sinkScalarOperands.
Depends on D133762.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D134218
Document recipes used to model inductions after introducing
VPDerivedIVRecipe in 0c5df7cd2f81c.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D138748
This reverts commit bf15f1e489aa2f1ac13268c9081a992a8963eb5b.
The updated version fixes a crash by checking the induction kind instead
of the opcode; for integer inductions, the step is always added, but the
opcode might not be set.
This patch splits off the logic to transform the canonical IV to a
a value for an induction with a different start and step. This
transformation only needs to be done once (independent of VF/UF) and
enables sinking of VPScalarIVStepsRecipe as follow-up.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D133758
The return value of getDef is guaranteed to be a VPRecipeBase and all
users can also accept a VPRecipeBase *. Most users actually case to
VPRecipeBase or a specific recipe before using it, so this change
removes a number of redundant casts.
Also rename it to getDefiningRecipe to make the name a bit clearer.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D136068
@Ayal suggested a better named helper than using `!getDef()` to check if
a value is invariant across all parts.
The property we are using here is that the VPValue is defined outside
any vector loop region. There's a TODO left to handle recipes defined in
pre-header blocks.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D133666
The dependent code has been changed quite a lot since 151c144 which
b73d2c8 effectively reverts. Now we run into a case where lowering
didn't expect/support the behavior pre 151c144 any longer.
Update the code dealing with scalable pointer inductions to also check
for uniformity in combination with isScalarAfterVectorization. This
should ensure scalable pointer inductions are handled properly during
epilogue vectorization.
Fixes#57912.
Epilogue vectorization uses isScalarAfterVectorization to check if
widened versions for inductions need to be generated and bails out in
those cases.
At the moment, there are scenarios where isScalarAfterVectorization
returns true but VPWidenPointerInduction::onlyScalarsGenerated would
return false, causing widening.
This can lead to widened phis with incorrect start values being created
in the epilogue vector body.
This patch addresses the issue by storing the cost-model decision in
VPWidenPointerInductionRecipe and restoring the behavior before 151c144.
This effectively reverts 151c144, but the long-term fix is to properly
support widened inductions during epilogue vectorization
Fixes#57712.
Use VPExpandSCEVRecipe to expand the step of pointer inductions. This
cleanup addresses a corresponding FIXME.
It should be NFC, as steps for pointer induction must be constants,
which makes expansion trivial.
This patch moves the cost-based decision whether to use an intrinsic or
library call to the point where the recipe is created. This untangles
code-gen from the cost model and also avoids doing some extra work as
the information is already computed at construction.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D132585
This addresses a suggestion to simplify the check from D131989. This
also makes it easier to ensure that VPHeaderPHIRecipe::classof checks
for all header phi ids.
Add verification that VPHeaderPHIRecipes are only in header VPBBs. Also
adds missing checks for VPPointerInductionRecipe to
VPHeaderPHIRecipe::classof.
Split off from D119661.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D131989
Currently, for vectorised loops that use the get.active.lane.mask
intrinsic we only use the mask for predicated vector operations,
such as masked loads and stores, etc. The loop itself is still
controlled by comparing the canonical induction variable with the
trip count. However, for some targets this is inefficient when it's
cheap to use the mask itself to control the loop.
This patch adds support for using the active lane mask for control
flow by:
1. Generating the active lane mask for the next iteration of the
vector loop, rather than the current one. If there are still any
remaining iterations then at least the first bit of the mask will
be set.
2. Extract the first bit of this mask and use this bit for the
conditional branch.
I did this by creating a new VPActiveLaneMaskPHIRecipe that sets
up the initial PHI values in the vector loop pre-header. I've also
made use of the new BranchOnCond VPInstruction for the final
instruction in the loop region.
Differential Revision: https://reviews.llvm.org/D125301
This patch is a simple piece of refactoring that now permits users
to create VPInstructions and specify the name of the value being
generated. This is useful for creating more readable/meaningful
names in IR.
Differential Revision: https://reviews.llvm.org/D128982
The moved helpers are only used for codegen. It will allow moving the
remaining ::execute implementations out of LoopVectorize.cpp.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D128657
At the moment, the same VPlan can be used code generation of both the
main vector and epilogue vector loop. This can lead to wrong results, if
the plan is optimized based on the VF of the main vector loop and then
re-used for the epilogue loop.
One example where this is problematic is if the scalar loops need to
execute at least one iteration, e.g. due to interleave groups.
To prevent mis-compiles in the short-term, disable optimizing exit
conditions for VPlans when using epilogue vectorization. The proper fix
is to avoid re-using the same plan for both loops, which will require
support for cloning plans first.
Fixes#56319.
The moved helpers are only used for codegen. It will allow moving the
remaining ::execute implementations out of LoopVectorize.cpp.
Depends on D127966.
Depends on D127965.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D127968
All information is already available in VPlan. Note that there are some
test changes, because we now can correctly look through instructions
like truncates to analyze the actual users.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D123541
This reverts commit 266ea446ab747671eb6c736569c3c9c5f3c53d11.
The reasons for the revert have been addressed by cleaning up condition
handling in VPlan and properly marking VPBranchOnMaskRecipe as using
scalars.
The test case for the revert from D123720 has been added in 3d663308a5d.
This patch removes CondBit and Predicate from VPBasicBlock. To do so,
the patch introduces a new branch-on-cond VPInstruction opcode to model
a branch on a condition explicitly.
This addresses a long-standing TODO/FIXME that blocks shouldn't be users
of VPValues. Those extra users can cause issues for VPValue-based
analyses that don't expect blocks. Addressing this fixme should allow us
to re-introduce 266ea446ab7476.
The generic branch opcode can also be used in follow-up patches.
Depends on D123005.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D126618
This patch updates the VPlan native path to use VPRegionBlocks for all
loops in a loop nest. Up to now, only the outermost loop used a region.
This is a step towards unifying both paths and keep things consistent
between them. It also prepares various code-gen parts for modeling the
pre-header in the inner loop vectorizer (D121624).
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D123005
The implementations of VPlanDominatorTree, VPlanLoopInfo and VPlanPredicator
are all incompatible with modeling loops in VPlans as region without
explicit back-edges.
Those pieces are not actively used and only exercised by a few gtest
unit tests. They are at the moment blocking progress towards unifying
the native and inner-loop vectorizer paths in D121624 and D123005.
I think we should not block forward progress on unused pieces of code,
so this patch removes the utilities for now. The plan is to re-introduce
them as needed in a way that is compatible with the unified VPlan scheme
used in both the inner loop vectorizer and the native path.
Reviewed By: sguggill
Differential Revision: https://reviews.llvm.org/D123017
In LLVM's common loop terminology, an exit block is a block outside a
loop with a predecessor inside the loop. An exiting block is a block
inside the loop which branches to an exit block outside the loop.
This patch updates a few places where VPlan was using ExitBlock for a
block exiting a region. Those instances have been updated to use
ExitingBlock.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D126173
Current codegen only supports scalarization of pointer inductions for
scalable VFs if they are uniform. After 3bebec659 we now may enter the
scalarization code path in VPWidenPointerInductionRecipe::execute for
scalable vectors.
Fall back to widening for scalable vectors if necessary.
This should fix a build failure when bootstrapping LLVM with SVE, e.g.
https://lab.llvm.org/buildbot/#/builders/176/builds/1723
This patch introduces a new VPLiveOut subclass of VPUser to model
exit values explicitly. The initial version handles exit values that
are neither part of induction or reduction chains nor first order
recurrence phis.
Fixes#51366, #54867, #55167, #55459
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D123537
VPWidenMemoryInstruction also models stores which may not produce a value.
This can trip over analyses. Improve the modeling by only adding
VPValues for VPWidenMemoryInstructionRecipes modeling loads.
Those helpers model properties of a user and they should also be
available to non-recipe users. This will be used in D123537 for a new
exit value user.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D124936
With opaque pointers, both the stored value and the address can be the
same. Only consider the recipe using the first lane only *if* the
address is not stored.
Fixes#55375.
This patch moves SCEV expansion of steps used by
VPWidenIntOrFpInductionRecipes to the pre-header using
VPExpandSCEVRecipe. This ensures that those steps are expanded while the
CFG is in a valid state. Previously, SCEV expansion may happen during
vector body code-generation, during which the CFG may be invalid,
causing issues with SCEV expansion.
Depends on D122095.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D122096
