This relates to the ongoing effort to support vectorization of multiple exit loops (see D93317).
The previous code assumed that LCSSA phis were always single entry before the vectorizer ran. This was correct, but only because the vectorizer allowed only a single exiting edge. There's nothing in the definition of LCSSA which requires single entry phis.
A common case where this comes up is with a loop with multiple exiting blocks which all reach a common exit block. (e.g. see the test updates)
Differential Revision: https://reviews.llvm.org/D93725
This patch unifies the way recipes and VPValues are printed after the
transition to VPDef.
VPSlotTracker has been updated to iterate over all recipes and all
their defined values to number those. There is no need to number
values in Value2VPValue.
It also updates a few places that only used slot numbers for
VPInstruction. All recipes now can produce numbered VPValues.
This patch is part of a series of patches that migrate integer
instruction costs to use InstructionCost. In the function
selectVectorizationFactor I have simply asserted that the cost
is valid and extracted the value as is. In future we expect
to encounter invalid costs, but we should filter out those
vectorization factors that lead to such invalid costs.
See this patch for the introduction of the type: https://reviews.llvm.org/D91174
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2020-November/146408.html
Differential Revision: https://reviews.llvm.org/D92178
A severe compile-time slowdown from this call is noted in:
https://llvm.org/PR48689
My naive fix was to put it under LLVM_DEBUG ( 267ff79 ),
but that's not limiting in the way we want.
This is a quick fix (or we could just remove the call completely
and rely on some later pass to discover potentially wrong IR?).
A bigger/better fix would be to improve/limit verifyFunction()
as noted in:
https://llvm.org/PR47712
Differential Revision: https://reviews.llvm.org/D94328
Similar to D92129, update VPWidenPHIRecipe to manage the start value as
VPValue. This allows adjusting the start value as a VPlan transform,
which will be used in a follow-up patch to support reductions during
epilogue vectorization.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D93975
This was suggested to prepare for D93975.
By moving the start value creation to widenPHInstruction, we set the
stage to manage the start value directly in VPWidenPHIRecipe, which be
used subsequently to set the 'resume' value for reductions during
epilogue vectorization.
It also moves RdxDesc to the recipe, so we do not have to rely on Legal
to look it up later.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D94175
As noted in PR48689, the verifier may have some kind
of exponential behavior that should be addressed
separately. For now, only run it in debug mode to
prevent problems for release+asserts.
That limit is what we had before D80401, and I'm
not sure if there was a reason to change it in that
patch.
In the following loop:
void foo(int *a, int *b, int N) {
for (int i=0; i<N; ++i)
a[i + 4] = a[i] + b[i];
}
The loop dependence constrains the VF to a maximum of (4, fixed), which
would mean using <4 x i32> as the vector type in vectorization.
Extending this to scalable vectorization, a VF of (4, scalable) implies
a vector type of <vscale x 4 x i32>. To determine if this is legal
vscale must be taken into account. For this example, unless
max(vscale)=1, it's unsafe to vectorize.
For SVE, the number of bits in an SVE register is architecturally
defined to be a multiple of 128 bits with a maximum of 2048 bits, thus
the maximum vscale is 16. In the loop above it is therefore unfeasible
to vectorize with SVE. However, in this loop:
void foo(int *a, int *b, int N) {
#pragma clang loop vectorize_width(X, scalable)
for (int i=0; i<N; ++i)
a[i + 32] = a[i] + b[i];
}
As long as max(vscale) multiplied by the number of lanes 'X' doesn't
exceed the dependence distance, it is safe to vectorize. For SVE a VF of
(2, scalable) is within this constraint, since a vector of <16 x 2 x 32>
will have no dependencies between lanes. For any number of lanes larger
than this it would be unsafe to vectorize.
This patch extends 'computeFeasibleMaxVF' to legalize scalable VFs
specified as loop hints, implementing the following behaviour:
* If the backend does not support scalable vectors, ignore the hint.
* If scalable vectorization is unfeasible given the loop
dependence, like in the first example above for SVE, then use a
fixed VF.
* Accept scalable VFs if it's safe to do so.
* Otherwise, clamp scalable VFs that exceed the maximum safe VF.
Reviewed By: sdesmalen, fhahn, david-arm
Differential Revision: https://reviews.llvm.org/D91718
The new test case here contains a first order recurrences and an
instruction that is replicated. The first order recurrence forces an
instruction to be sunk _into_, as opposed to after the replication
region. That causes several things to go wrong including registering
vector instructions multiple times and failing to create dominance
relations correctly.
Instead we should be sinking to after the replication region, which is
what this patch makes sure happens.
Differential Revision: https://reviews.llvm.org/D93629
After merging the shuffles, we cannot rely on the previous shuffle
anymore and need to shrink the final shuffle, if it is required.
Reported in D92668
Differential Revision: https://reviews.llvm.org/D93967
Similar to 5a1d31a28 -
This should be no-functional-change because the reduction kind
opcodes are 1-for-1 mappings to the instructions we are matching
as reductions. But we want to remove the need for the
`OperationData` opcode field because that does not work when
we start matching intrinsics (eg, maxnum) as reduction candidates.
This patch updates VPWidenIntOrFpInductionRecipe to hold the start value
for the induction variable. This makes the start value explicit and
allows for adjusting the start value for a VPlan.
The flexibility will be used in further patches.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D92129
This patch adds a new getLiveInIRValue accessor to VPValue, which
returns the underlying value, if the VPValue is defined outside of
VPlan. This is required to handle scalars in VPTransformState, which
requires dealing with scalars defined outside of VPlan.
We can simply check VPValue::Def to determine if the value is defined
inside a VPlan.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D92281
This patch makes SLP and LV emit operations with initial vectors set to poison constant instead of undef.
This is a part of efforts for using poison vector instead of undef to represent "doesn't care" vector.
The goal is to make nice shufflevector optimizations valid that is currently incorrect due to the tricky interaction between undef and poison (see https://bugs.llvm.org/show_bug.cgi?id=44185 ).
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D94061
This should be no-functional-change because the reduction kind
opcodes are 1-for-1 mappings to the instructions we are matching
as reductions. But we want to remove the need for the
`OperationData` opcode field because that does not work when
we start matching intrinsics (eg, maxnum) as reduction candidates.
SLP tries to model 2 forms of vector reductions: pairwise and splitting.
From the cost model code comments, those are defined using an example as:
/// Pairwise:
/// (v0, v1, v2, v3)
/// ((v0+v1), (v2+v3), undef, undef)
/// Split:
/// (v0, v1, v2, v3)
/// ((v0+v2), (v1+v3), undef, undef)
I don't know the full history of this functionality, but it was partly
added back in D29402. There are apparently no users at this point (no
regression tests change). X86 might have managed to work-around the need
for this through cost model and codegen improvements.
Removing this code makes it easier to continue the work that was started
in D87416 / D88193. The alternative -- if there is some target that is
silently using this option -- is to move this logic into LoopUtils. We
have related/duplicate functionality there via llvm::createTargetReduction().
Differential Revision: https://reviews.llvm.org/D93860
Creating in-loop reductions relies on IR references to map
IR values to VPValues after interleave group creation.
Make sure we re-add the updated member to the plan, so the look-ups
still work as expected
This fixes a crash reported after D90562.
While here, rename the inaccurate getRecurrenceBinOp()
because that was also used to get CmpInst opcodes.
The recurrence/reduction kind should always refer to the
expected opcode for a reduction. SLP appears to be the
only direct caller of createSimpleTargetReduction(), and
that calling code ideally should not be carrying around
both an opcode and a reduction kind.
This should allow us to generalize reduction matching to
use intrinsics instead of only binops.
This is almost all mechanical search-and-replace and
no-functional-change-intended (NFC). Having a single
enum makes it easier to match/reason about the
reduction cases.
The goal is to remove `Opcode` from reduction matching
code in the vectorizers because that makes it harder to
adapt the code to handle intrinsics.
The code in RecurrenceDescriptor::AddReductionVar() is
the only place that required closer inspection. It uses
a RecurrenceDescriptor and a second InstDesc to sometimes
overwrite part of the struct. It seem like we should be
able to simplify that logic, but it's not clear exactly
which cmp+sel patterns that we are trying to handle/avoid.
If DoExtraAnalysis is true (e.g. because remarks are enabled), we
continue with the analysis rather than exiting. Update code to
conditionally check if the ExitBB has phis or not a single predecessor.
Otherwise a nullptr is dereferenced with DoExtraAnalysis.
I don't know if there's some way this changes what the vectorizers
may produce for reductions, but I have added test coverage with
3567908 and 5ced712 to show that both passes already have bugs in
this area. Hopefully this does not make things worse before we can
really fix it.
I'm not sure if the SLP enum was created before the IVDescriptor
RecurrenceDescriptor / RecurrenceKind existed, but the code in
SLP is now redundant with that class, so it just makes things
more complicated to have both. We eventually call LoopUtils
createSimpleTargetReduction() to create reduction ops, so we
might as well standardize on those enum names.
There's still a question of whether we need to use TTI::ReductionFlags
vs. MinMaxRecurrenceKind, but that can be another clean-up step.
Another option would just be to flatten the enums in RecurrenceDescriptor
into a single enum. There isn't much benefit (smaller switches?) to
having a min/max subset.
This reverts commit 4ffcd4fe9ac2ee948948f732baa16663eb63f1c7 thus restoring e4df6a40dad.
The only change from the original patch is to add "llvm::" before the call to empty(iterator_range). This is a speculative fix for the ambiguity reported on some builders.
This patch is a major step towards supporting multiple exit loops in the vectorizer. This patch on it's own extends the loop forms allowed in two ways:
single exit loops which are not bottom tested
multiple exit loops w/ a single exit block reached from all exits and no phis in the exit block (because of LCSSA this implies no values defined in the loop used later)
The restrictions on multiple exit loop structures will be removed in follow up patches; disallowing cases for now makes the code changes smaller and more obvious. As before, we can only handle loops with entirely analyzable exits. Removing that restriction is much harder, and is not part of currently planned efforts.
The basic idea here is that we can force the last iteration to run in the scalar epilogue loop (if we have one). From the definition of SCEV's backedge taken count, we know that no earlier iteration can exit the vector body. As such, we can leave the decision on which exit to be taken to the scalar code and generate a bottom tested vector loop which runs all but the last iteration.
The existing code already had the notion of requiring one iteration in the scalar epilogue, this patch is mainly about generalizing that support slightly, making sure we don't try to use this mechanism when tail folding, and updating the code to reflect the difference between a single exit block and a unique exit block (very mechanical).
Differential Revision: https://reviews.llvm.org/D93317
Previously the branch from the middle block to the scalar preheader & exit
was being set-up at the end of skeleton creation in completeLoopSkeleton.
Inserting SCEV or runtime checks may result in LCSSA phis being created,
if they are required. Adjusting branches afterwards may break those
PHIs.
To avoid this, we can instead create the branch from the middle block
to the exit after we created the middle block, so we have the final CFG
before potentially adjusting/creating PHIs.
This fixes a crash for the included test case. For the non-crashing
case, this is almost a NFC with respect to the generated code. The
only change is the order of the predecessors of the involved branch
targets.
Note an assertion was moved from LoopVersioning() to
LoopVersioning::versionLoop. Adjusting the branches means loop-simplify
form may be broken before constructing LoopVersioning. But LV only uses
LoopVersioning to annotate the loop instructions with !noalias metadata,
which does not require loop-simplify form.
This is a fix for an existing issue uncovered by D93317.
I am hoping to extend the reduction matching code, and it is
hard to distinguish "ReductionData" from "ReducedValueData".
So extend the tree/root metaphor to include leaves.
Another problem is that the name "OperationData" does not
provide insight into its purpose. I'm not sure if we can alter
that underlying data structure to make the code clearer.
I think this is NFC currently, but the bug would be exposed
when we allow binary intrinsics (maxnum, etc) as candidates
for reductions.
The code in matchAssociativeReduction() is using
OperationData::getNumberOfOperands() when comparing whether
the "EdgeToVisit" iterator is in-bounds, so this code must
use the same (potentially offset) operand value to set
the "EdgeToVisit".
ScalarEvolution should be able to handle both constant and variable trip
counts using getURemExpr, so we do not have to handle them separately.
This is a small simplification of a56280094e08.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D93677
This patch turns updates VPInstruction to manage the value it defines
using VPDef. The VPValue is used during VPlan construction and
codegeneration instead of the plain IR reference where possible.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D90565
When the trip-count is provably divisible by the maximal/chosen VF, folding the
loop's tail during vectorization is redundant. This commit extends the existing
test for constant trip-counts to any trip-count known to be divisible by
maximal/selected VF by SCEV.
Differential Revision: https://reviews.llvm.org/D93615
