This patch modifies SelectionDAG and FastISel to produce DBG_INSTR_REFs with
variadic expressions, and produce DBG_INSTR_REFs for debug values with variadic
location expressions. The former essentially means just prepending
DW_OP_LLVM_arg, 0 to the existing expression. The latter is achieved in
MachineFunction::finalizeDebugInstrRefs and InstrEmitter::EmitDbgInstrRef.
Reviewed By: jmorse, Orlando
Differential Revision: https://reviews.llvm.org/D133929
Following support from the previous patches in this stack being added for
variadic DBG_INSTR_REFs to exist, this patch modifies LiveDebugValues to
handle those instructions. Support already exists for DBG_VALUE_LISTs, which
covers most of the work needed to handle these instructions; this patch only
modifies the transferDebugInstrRef function to correctly track them.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D133927
Prior to this patch, variadic DIExpressions (i.e. ones that contain
DW_OP_LLVM_arg) could only be created by salvaging debug values to create
stack value expressions, resulting in a DBG_VALUE_LIST being created. As of
the previous patch in this patch stack, DBG_INSTR_REF's syntax has been
changed to match DBG_VALUE_LIST in preparation for supporting variadic
expressions. This patch adds some minor changes needed to allow variadic
expressions that aren't stack values to exist, and allows variadic expressions
that are trivially reduceable to non-variadic expressions to be handled
similarly to non-variadic expressions.
Reviewed by: jmorse
Differential Revision: https://reviews.llvm.org/D133926
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
This patch adds a new function that can be used to check all the
properties, other than the machine values, of a pair of debug values for
equivalence. This is done by folding the "directness" into the
expression, converting the expression to variadic form if it is not
already in that form, and then comparing directly. In a few places which
check whether two debug values are identical to see if their ranges can
be merged, this function will correctly identify cases where two debug
values are expressed differently but have the same meaning, allowing
those ranges to be correctly merged.
Differential Revision: https://reviews.llvm.org/D136173
value() has undesired exception checking semantics and calls
__throw_bad_optional_access in libc++. Moreover, the API is unavailable without
_LIBCPP_NO_EXCEPTIONS on older Mach-O platforms (see
_LIBCPP_AVAILABILITY_BAD_OPTIONAL_ACCESS).
This fixes check-llvm.
getCanonicalMDString() also returns a nullptr for empty strings, which
tripped over the getSource() method. Solve the ambiguity of no source
versus an optional containing a nullptr by simply storing a pointer.
Differential Revision: https://reviews.llvm.org/D138658
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
This patch replaces NoneType() and NoneType::None with None in
preparation for migration from llvm::Optional to std::optional.
In the std::optional world, we are not guranteed to be able to
default-construct std::nullopt_t or peek what's inside it, so neither
NoneType() nor NoneType::None has a corresponding expression in the
std::optional world.
Once we consistently use None, we should even be able to replace the
contents of llvm/include/llvm/ADT/None.h with something like:
using NoneType = std::nullopt_t;
inline constexpr std::nullopt_t None = std::nullopt;
to ease the migration from llvm::Optional to std::optional.
Differential Revision: https://reviews.llvm.org/D138376
createFragmentExpression rejects expressions containing certain ops, like
DW_OP_plus, that may cause the expression to compute a value that can't be
split.
Teach createFragmentExpression that the value loaded from an address computed
using those ops is safe to split.
Update a unittest to account for and test this change.
Reviewed By: StephenTozer
Differential Revision: https://reviews.llvm.org/D136243
getMergedLocation returns a 'line 0' DILocaiton if the two locations
being merged don't perfecly match, even if they are in the same line but
a different column.
This commit adds support to keep the line number if it matches (but only
the column differs). The merged column number is the leftmost between the
two.
Reviewed By: dblaikie, orlando
Differential Revision: https://reviews.llvm.org/D135166
Fixed a bug with double destruction of operands and corrected a test issue.
Note that this patch leads to a slight increase in compile time (I measured
about .3%) and a slight increase in memory usage. The increased memory usage
should be offset once resizing is used to a larger extent.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D125998
A change to the allocation characteristics of MDNodes, introducing the ability
to add operands one at a time. This functionality is restricted to MDTuples.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D125998
specifying DW_AT_trampoline as a string. Also update the signature
of DIBuilder::createFunction to reflect this addition.
Differential Revision: https://reviews.llvm.org/D123697
ProfileCount could model invalid values, but a user had no indication
that the getCount method could return bogus data. Optional<ProfileCount>
addresses that, because the user must dereference the optional. In
addition, the patch removes concept duplication.
Differential Revision: https://reviews.llvm.org/D113839
This patch adds the functionalities to print MDNode in tree shape. For
example, instead of printing a MDNode like this:
```
<0x5643e1166888> = !DILocalVariable(name: "foo", arg: 2, scope: <0x5643e11c9740>, file: <0x5643e11c6ec0>, line: 8, type: <0x5643e11ca8e0>, flags: DIFlagPublic | DIFlagFwdDecl, align: 8)
```
The printTree/dumpTree functions can give you:
```
<0x5643e1166888> = !DILocalVariable(name: "foo", arg: 2, scope: <0x5643e11c9740>, file: <0x5643e11c6ec0>, line: 8, type: <0x5643e11ca8e0>, flags: DIFlagPublic | DIFlagFwdDecl, align: 8)
<0x5643e11c9740> = distinct !DISubprogram(scope: null, spFlags: 0)
<0x5643e11c6ec0> = distinct !DIFile(filename: "file.c", directory: "/path/to/dir")
<0x5643e11ca8e0> = distinct !DIDerivedType(tag: DW_TAG_pointer_type, baseType: <0x5643e11668d8>, size: 1, align: 2)
<0x5643e11668d8> = !DIBasicType(tag: DW_TAG_unspecified_type, name: "basictype")
```
Which is useful when using it in debugger. Where sometimes printing the
whole module to see all MDNodes is too expensive.
Differential Revision: https://reviews.llvm.org/D110113
New field `elements` is added to '!DIImportedEntity', representing
list of aliased entities.
This is needed to dump optimized debugging information where all names
in a module are imported, but a few names are imported with overriding
aliases.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D109343
Generate btf_tag annotations for function parameters.
A field "annotations" is introduced to DILocalVariable, and
annotations are represented as an DINodeArray, similar to
DIComposite elements. The following example illustrates how
annotations are encoded in IR:
distinct !DILocalVariable(name: "info",, arg: 1, ..., annotations: !10)
!10 = !{!11, !12}
!11 = !{!"btf_tag", !"a"}
!12 = !{!"btf_tag", !"b"}
Differential Revision: https://reviews.llvm.org/D106620
Generate btf_tag annotations for DIGlobalVariable.
A field "annotations" is introduced to DIGlobalVariable, and
annotations are represented as an DINodeArray, similar to
DIComposite elements. The following example illustrates how
annotations are encoded in IR:
distinct !DIGlobalVariable(..., annotations: !10)
!10 = !{!11, !12}
!11 = !{!"btf_tag", !"a"}
!12 = !{!"btf_tag", !"b"}
Differential Revision: https://reviews.llvm.org/D106619
It's entirely possible (because it actually happened) for a bool
variable to end up with a 256-bit DW_AT_const_value. This came about
when a local bool variable was initialized from a bitfield in a
32-byte struct of bitfields, and after inlining and constant
propagation, the variable did have a constant value. The sequence of
optimizations had it carrying "i256" values around, but once the
constant made it into the llvm.dbg.value, no further IR changes could
affect it.
Technically the llvm.dbg.value did have a DIExpression to reduce it
back down to 8 bits, but the compiler is in no way ready to emit an
oversized constant *and* a DWARF expression to manipulate it.
Depending on the circumstances, we had either just the very fat bool
value, or an expression with no starting value.
The sequence of optimizations that led to this state did seem pretty
reasonable, so the solution I came up with was to invent a DWARF
constant expression folder. Currently it only does convert ops, but
there's no reason it couldn't do other ops if that became useful.
This broke three tests that depended on having convert ops survive
into the DWARF, so I added an operator that would abort the folder to
each of those tests.
Differential Revision: https://reviews.llvm.org/D106915
The LiveDebugValues and LiveDebugVariables implementations for handling
DBG_VALUE_LIST instructions can be simplified significantly if they do not have
to deal with any duplicated operands, such as a DBG_VALUE_LIST that uses the
same register multiple times in its expression. This patch adds a function,
replaceArg, that can be used to simplify a DIExpression in the case of
duplicated operands.
Differential Revision: https://reviews.llvm.org/D83896
This patch adds a new metadata node, DIArgList, which contains a list of SSA
values. This node is in many ways similar in function to the existing
ValueAsMetadata node, with the difference being that it tracks a list instead of
a single value. Internally, it uses ValueAsMetadata to track the individual
values, but there is also a reasonable amount of DIArgList-specific
value-tracking logic on top of that. Similar to ValueAsMetadata, it is a special
case in parsing and printing due to the fact that it requires a function state
(as it may reference function-local values).
This patch should not result in any immediate functional change; it allows for
DIArgLists to be parsed and printed, but debug variable intrinsics do not yet
recognize them as a valid argument (outside of parsing).
Differential Revision: https://reviews.llvm.org/D88175
The main change is to add a 'IsDecl' field to DIModule so
that when IsDecl is set to true, the debug info entry generated
for the module would be marked as a declaration. That way, the debugger
would look up the definition of the module in the gloabl scope.
Please see the comments in llvm/test/DebugInfo/X86/dimodule.ll
for what the debug info entries would look like.
Differential Revision: https://reviews.llvm.org/D93462
This is needed to support fortran assumed rank arrays which
have runtime rank.
Summary:
Fortran assumed rank arrays have dynamic rank. DWARF TAG
DW_TAG_generic_subrange is needed to support that.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89218
This patch adds support for DWARF attribute DW_AT_rank.
Summary:
Fortran assumed rank arrays have dynamic rank. DWARF attribute
DW_AT_rank is needed to support that.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89141
This patch upgrades DISubrange to support fortran requirements.
Summary:
Below are the updates/addition of fields.
lowerBound - Now accepts signed integer or DIVariable or DIExpression,
earlier it accepted only signed integer.
upperBound - This field is now added and accepts signed interger or
DIVariable or DIExpression.
stride - This field is now added and accepts signed interger or
DIVariable or DIExpression.
This is required to describe bounds of array which are known at runtime.
Testing:
unit test cases added (hand-written)
check clang
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D80197
This patch adds support for DWARF attribute DW_AT_data_location.
Summary:
Dynamic arrays in fortran are described by array descriptor and
data allocation address. Former is mapped to DW_AT_location and
later is mapped to DW_AT_data_location.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79592
This patch extends DIModule Debug metadata in LLVM to support
Fortran modules. DIModule is extended to contain File and Line
fields, these fields will be used by Flang FE to create debug
information necessary for representing Fortran modules at IR level.
Furthermore DW_TAG_module is also extended to contain these fields.
If these fields are missing, debuggers like GDB won't be able to
show Fortran modules information correctly.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79484
In order for dsymutil to collect .apinotes files (which capture
attributes such as nullability, Swift import names, and availability),
I want to propose adding an apinotes: field to DIModule that gets
translated into a DW_AT_LLVM_apinotes (path) nested inside
DW_TAG_module. This will be primarily used by LLDB to indirectly
extract the Swift names of Clang declarations that were deserialized
from DWARF.
<rdar://problem/59514626>
Differential Revision: https://reviews.llvm.org/D75585
This is part of PR44213 https://bugs.llvm.org/show_bug.cgi?id=44213
When importing (system) Clang modules, LLDB needs to know which SDK
(e.g., MacOSX, iPhoneSimulator, ...) they came from. While the sysroot
attribute contains the absolute path to the SDK, this doesn't work
well when the debugger is run on a different machine than the
compiler, and the SDKs are installed in different directories. It thus
makes sense to just store the name of the SDK instead of the absolute
path, so it can be found relative to LLDB.
rdar://problem/51645582
Differential Revision: https://reviews.llvm.org/D75646
in C++ templates."
This was reverted in 802b22b5c8c30bebc1695a217478be02653c6b53 due to
missing .bc file and a chromium bot failure.
https://bugs.chromium.org/p/chromium/issues/detail?id=1057559#c1
This revision address both of them.
Summary:
This patch adds support for debuginfo generation for defaulted
parameters in clang and also extends corresponding DebugMetadata/IR to support this feature.
Reviewers: probinson, aprantl, dblaikie
Reviewed By: aprantl, dblaikie
Differential Revision: https://reviews.llvm.org/D73462
The Bitcode/DITemplateParameter-5.0.ll test is failing:
FAIL: LLVM :: Bitcode/DITemplateParameter-5.0.ll (5894 of 36324)
******************** TEST 'LLVM :: Bitcode/DITemplateParameter-5.0.ll' FAILED ********************
Script:
--
: 'RUN: at line 1'; /usr/local/google/home/thakis/src/llvm-project/out/gn/bin/llvm-dis -o - /usr/local/google/home/thakis/src/llvm-project/llvm/test/Bitcode/DITemplateParameter-5.0.ll.bc | /usr/local/google/home/thakis/src/llvm-project/out/gn/bin/FileCheck /usr/local/google/home/thakis/src/llvm-project/llvm/test/Bitcode/DITemplateParameter-5.0.ll
--
Exit Code: 2
Command Output (stderr):
--
It looks like the Bitcode/DITemplateParameter-5.0.ll.bc file was never checked in.
This reverts commit c2b437d53d40b6dc5603c97f527398f477d9c5f1.
in C++ templates.
Summary:
This patch adds support for debuginfo generation for defaulted
parameters in clang and also extends corresponding DebugMetadata/IR to support this feature.
Reviewers: probinson, aprantl, dblaikie
Reviewed By: aprantl, dblaikie
Differential Revision: https://reviews.llvm.org/D73462
[this re-applies c0176916a4824812d25a5a22c4ff7c95857b0cd6
with the correct commit message and phabricator link]
This addresses point 1 of PR44213.
https://bugs.llvm.org/show_bug.cgi?id=44213
The DW_AT_LLVM_sysroot attribute is used for Clang module debug info,
to allow LLDB to import a Clang module from source. Currently it is
part of each DW_TAG_module, however, it is the same for all modules in
a compile unit. It is more efficient and less ambiguous to store it
once in the DW_TAG_compile_unit.
This should have no effect on DWARF consumers other than LLDB.
Differential Revision: https://reviews.llvm.org/D71732
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
This is a purely cosmetic change that is NFC in terms of the binary
output. I bugs me that I called the attribute DW_AT_LLVM_isysroot
since the "i" is an artifact of GCC command line option syntax
(-isysroot is in the category of -i options) and doesn't carry any
useful information otherwise.
This attribute only appears in Clang module debug info.
Differential Revision: https://reviews.llvm.org/D71722
The DebugVariable class is a class declared in LiveDebugValues.cpp which
is used to uniquely identify a single variable, using its source
variable, inline location, and fragment info to do so. This patch moves
this class into DebugInfoMetadata.h, making it available in a much
broader scope.
