Handle !noundef metadata in comhineMetadata. The behavior of violating
!noundef metadata is undefined behavior. So if K dominates J, we can
preserve it uncontionally, otherwise, we preserve it if both K and J
have !noundef metadata been set.
This patch also makes !noundef metadata added in KnownIDs when doing
instruction combine for phi node or global value numbering for loads.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D142801
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
Rather than inserting a ptrtoint + inttoptr pair, directly replace
the inttoptr with the new phi node. This ensures that no other
transform can undo it before the pair gets folded away.
This avoids the infinite loop when combined with D134954.
This is NFCI in the sense that it shouldn't make a difference, but
could due to different worklist order.
If an integer PHI has an illegal type (according to the data layout) and
it is only used by `trunc` or `trunc(lshr)` operations, we split the PHI
into various instructions in its predecessors:
6d1543a167/llvm/lib/Transforms/InstCombine/InstCombinePHI.cpp (L1536-L1543)
So this can produce code like the following:
Before:
```
pred:
...
bb:
%p = phi i8 [ %somevalue, %pred ], ...
...
%tobool = trunc i8 %p to i1
use %tobool
...
```
In this code, `%p` has an illegal integer type, `i8`, and its only used
in a `trunc` instruction later. In this case this pass puts extraction
code in its predecessors:
After:
```
pred:
...
%t = and i8 %somevalue, 1
%extract = icmp ne i8 %t, 0
bb:
%p.new = phi i1 [ %extract, %pred ], ...
use %p.new instead of %tobool
```
But this doesn't work if `pred` is a `catchswitch` BB because it cannot
have any non-PHI instructions. This CL ensures we bail out in that case.
Fixes https://github.com/llvm/llvm-project/issues/55803.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D127699
Clang-format InstructionSimplify and convert all "FunctionName"s to
"functionName". This patch does touch a lot of files but gets done with
the cleanup of InstructionSimplify in one commit.
This is the alternative to the less invasive clang-format only patch: D126783
Reviewed By: spatel, rengolin
Differential Revision: https://reviews.llvm.org/D126889
Reapply with an explicit check for multi-edges, as the expected
behavior of multi-edge dominance is unclear (D120811).
-----
For conditional branches, we know the value is i1 0 or i1 1 along
the outgoing edges. For switches we can apply exactly the same
optimization, just with the known values determined by the switch
cases.
For conditional branches, we know the value is i1 0 or i1 1 along
the outgoing edges. For switches we can apply exactly the same
optimization, just with the known values determined by the switch
cases.
This transform can still be applied if there are more than two
phi inputs, as long as phi inputs with the same value are dominated
by the same idom edge.
Rather than checking that the type is the same (which is always
the case, given how these are part of the same phi) check that the
source element type is the same. With opaque pointers, this is no
longer implied.
Before this change, InstCombine was willing to fold atomic and
non-atomic loads through a PHI node as long as the first PHI argument
is not an atomic load. The combined load would be non-atomic, which is
incorrect.
Fix this by only combining the loads in a PHI node when all of the
arguments are non-atomic loads.
Thanks to Eli Friedman for pointing out the bug at
https://github.com/llvm/llvm-project/issues/50777#issuecomment-981045342!
Fixes#50777
Differential Revision: https://reviews.llvm.org/D115113
Uppercase some variable names, per LLVM coding standards. This change
intentionally does not rename every miscased variable, as a follow-up
change ( D116086 ) intends to eliminate many of those by switching
loops to range for loops.
Differential Revision: https://reviews.llvm.org/D118553
The inttoptr/ptrtoint roundtrip optimization is not always correct.
We are working towards removing this optimization and adding support to specific cases where this optimization works.
In this patch, we focus on phi-node operands with inttoptr casts.
We know that ptrtoint( inttoptr( ptrtoint x) ) is same as ptrtoint (x).
So, we want to remove this roundtrip cast which goes through phi-node.
Reviewed By: aqjune
Differential Revision: https://reviews.llvm.org/D106289
This tries to bail out if the PHI is in a `catchswitch` BB in
InstCombine. A PHI cannot be combined into a non-PHI instruction if it
is in a `catchswitch` BB, because `catchswitch` BB cannot have any
non-PHI instruction other than `catchswitch` itself.
The given test case started crashing after D98058.
Reviewed By: lebedev.ri, rnk
Differential Revision: https://reviews.llvm.org/D105309
This patch updates InstCombine to use poison constant to represent the resulting value of (either semantically or syntactically) unreachable instrs, or a don't-care value of an unreachable store instruction.
This allows more aggressive folding of unused results, as shown in llvm/test/Transforms/InstCombine/getelementptr.ll .
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D104602
If the incoming values of a phi are pointer casts of the same original
value, replace the phi with a single cast. Such redundant phis are
somewhat common after loop-rotate and removing them can avoid some
unnecessary code bloat, e.g. because an iteration of a loop is peeled
off to make the phi invariant. It should also simplify further analysis
on its own.
InstCombine already uses stripPointerCasts in a couple of places and
also simplifies phis based on the incoming values, so the patch should
fit in the existing scope.
The patch causes binary changes in 47 out of 237 benchmarks in
MultiSource/SPEC2000/SPEC2006 with -O3 -flto on X86.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D98058
The IR/MIR pseudo probe intrinsics don't get materialized into real machine instructions and therefore they don't incur runtime cost directly. However, they come with indirect cost by blocking certain optimizations. Some of the blocking are intentional (such as blocking code merge) for better counts quality while the others are accidental. This change unblocks perf-critical optimizations that do not affect counts quality. They include:
1. IR InstCombine, sinking load operation to shorten lifetimes.
2. MIR LiveRangeShrink, similar to #1
3. MIR TwoAddressInstructionPass, i.e, opeq transform
4. MIR function argument copy elision
5. IR stack protection. (though not perf-critical but nice to have).
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D95982
The original take 1 was 6102310d814ad73eab60a88b21dd70874f7a056f,
which taught InstSimplify to do that, which seemed better at time,
since we got EarlyCSE support for free.
However, it was proven that we can not do that there,
the simplified-to PHI would not be reachable from the original PHI,
and that is not something InstSimplify is allowed to do,
as noted in the commit ed90f15efb40d26b5d3ead3bb8e9e284218e0186
that reverted it:
> It appears to cause compilation non-determinism and caused stage3 mismatches.
Then there was take 2 3e69871ab5a66fb55913a2a2f5e7f5b42899a4c9,
which was InstCombine-specific, but it again showed stage2-stage3 differences,
and reverted in bdaa3f86a040b138c58de41d73d35b76fdec1380.
This is quite alarming.
Here, let's try to change how we find existing PHI candidate:
due to the worklist order, and the way PHI nodes are inserted
(it may be inserted as the first one, or maybe not), let's look at *all*
PHI nodes in the block.
Effects on vanilla llvm test-suite + RawSpeed:
```
| statistic name | baseline | proposed | Δ | % | \|%\| |
|----------------------------------------------------|-----------|-----------|-------:|---------:|---------:|
| asm-printer.EmittedInsts | 7942329 | 7942457 | 128 | 0.00% | 0.00% |
| assembler.ObjectBytes | 254295632 | 254312480 | 16848 | 0.01% | 0.01% |
| correlated-value-propagation.NumPhis | 18412 | 18347 | -65 | -0.35% | 0.35% |
| early-cse.NumCSE | 2183283 | 2183267 | -16 | 0.00% | 0.00% |
| early-cse.NumSimplify | 550105 | 541842 | -8263 | -1.50% | 1.50% |
| instcombine.NumAggregateReconstructionsSimplified | 73 | 4506 | 4433 | 6072.60% | 6072.60% |
| instcombine.NumCombined | 3640311 | 3644419 | 4108 | 0.11% | 0.11% |
| instcombine.NumDeadInst | 1778204 | 1783205 | 5001 | 0.28% | 0.28% |
| instcombine.NumPHICSEs | 0 | 22490 | 22490 | 0.00% | 0.00% |
| instcombine.NumWorklistIterations | 2023272 | 2024400 | 1128 | 0.06% | 0.06% |
| instcount.NumCallInst | 1758395 | 1758802 | 407 | 0.02% | 0.02% |
| instcount.NumInvokeInst | 59478 | 59502 | 24 | 0.04% | 0.04% |
| instcount.NumPHIInst | 330557 | 330545 | -12 | 0.00% | 0.00% |
| instcount.TotalBlocks | 1077138 | 1077220 | 82 | 0.01% | 0.01% |
| instcount.TotalFuncs | 101442 | 101441 | -1 | 0.00% | 0.00% |
| instcount.TotalInsts | 8831946 | 8832606 | 660 | 0.01% | 0.01% |
| simplifycfg.NumHoistCommonCode | 24186 | 24187 | 1 | 0.00% | 0.00% |
| simplifycfg.NumInvokes | 4300 | 4410 | 110 | 2.56% | 2.56% |
| simplifycfg.NumSimpl | 1019813 | 999767 | -20046 | -1.97% | 1.97% |
```
So it fires 22490 times, which is less than ~24k the take 1 did,
but more than what take 2 did (22228 times)
.
It allows foldAggregateConstructionIntoAggregateReuse() to actually work
after PHI-of-extractvalue folds did their thing. Previously SimplifyCFG
would have done this PHI CSE, of all places. Additionally, allows some
more `invoke`->`call` folds to happen (+110, +2.56%).
All in all, expectedly, this catches less things overall,
but all the motivational cases are still caught, so all good.
While the original variant with doing this in InstSimplify (rightfully)
caused questions and ultimately was detected to be a culprit
of stage2-stage3 mismatch, it was expected that
InstCombine-based implementation would be fine.
But apparently it's not, as
http://lab.llvm.org:8011/builders/clang-with-thin-lto-ubuntu/builds/24095/steps/compare-compilers/logs/stdio
suggests.
Which suggests that somewhere in InstCombine there is a loop
over nondeterministically sorted container, which causes
different worklist ordering.
This reverts commit 3e69871ab5a66fb55913a2a2f5e7f5b42899a4c9.
The original take was 6102310d814ad73eab60a88b21dd70874f7a056f,
which taught InstSimplify to do that, which seemed better at time,
since we got EarlyCSE support for free.
However, it was proven that we can not do that there,
the simplified-to PHI would not be reachable from the original PHI,
and that is not something InstSimplify is allowed to do,
as noted in the commit ed90f15efb40d26b5d3ead3bb8e9e284218e0186
that reverted it :
> It appears to cause compilation non-determinism and caused stage3 mismatches.
However InstCombine already does many different optimizations,
so it should be a safe place to do it here.
Note that we still can't just compare incoming values ranges,
because there is no guarantee that these PHI's we'd simplify to
were already re-visited and sorted.
However coming up with a test is problematic.
Effects on vanilla llvm test-suite + RawSpeed:
```
| statistic name | baseline | proposed | Δ | % | |%| |
|----------------------------------------------------|-----------|-----------|-------:|---------:|---------:|
| instcombine.NumPHICSEs | 0 | 22228 | 22228 | 0.00% | 0.00% |
| asm-printer.EmittedInsts | 7942329 | 7942456 | 127 | 0.00% | 0.00% |
| assembler.ObjectBytes | 254295632 | 254313792 | 18160 | 0.01% | 0.01% |
| early-cse.NumCSE | 2183283 | 2183272 | -11 | 0.00% | 0.00% |
| early-cse.NumSimplify | 550105 | 541842 | -8263 | -1.50% | 1.50% |
| instcombine.NumAggregateReconstructionsSimplified | 73 | 4506 | 4433 | 6072.60% | 6072.60% |
| instcombine.NumCombined | 3640311 | 3666911 | 26600 | 0.73% | 0.73% |
| instcombine.NumDeadInst | 1778204 | 1783318 | 5114 | 0.29% | 0.29% |
| instcount.NumCallInst | 1758395 | 1758804 | 409 | 0.02% | 0.02% |
| instcount.NumInvokeInst | 59478 | 59502 | 24 | 0.04% | 0.04% |
| instcount.NumPHIInst | 330557 | 330549 | -8 | 0.00% | 0.00% |
| instcount.TotalBlocks | 1077138 | 1077221 | 83 | 0.01% | 0.01% |
| instcount.TotalFuncs | 101442 | 101441 | -1 | 0.00% | 0.00% |
| instcount.TotalInsts | 8831946 | 8832611 | 665 | 0.01% | 0.01% |
| simplifycfg.NumInvokes | 4300 | 4410 | 110 | 2.56% | 2.56% |
| simplifycfg.NumSimpl | 1019813 | 999740 | -20073 | -1.97% | 1.97% |
```
So it fires ~22k times, which is less than ~24k the take 1 did.
It allows foldAggregateConstructionIntoAggregateReuse() to actually work
after PHI-of-extractvalue folds did their thing. Previously SimplifyCFG
would have done this PHI CSE, of all places. Additionally, allows some
more `invoke`->`call` folds to happen (+110, +2.56%).
All in all, expectedly, this catches less things overall,
but all the motivational cases are still caught, so all good.
As FIXME said, they really should be checking for a single user,
not use, so let's do that. It is not *that* unusual to have
the same value as incoming value in a PHI node, not unlike
how a PHI may have the same incoming basic block more than once.
There isn't a nice way to do that, Value::users() isn't uniqified,
and Value only tracks it's uses, not Users, so the check is
potentially costly since it does indeed potentially involes
traversing the entire use list of a value.
While since D86306 we do it's sibling fold for `insertvalue`,
we should also do this for `extractvalue`'s.
And unlike that one, the results here are, quite honestly, shocking,
as it can be observed here on vanilla llvm test-suite + RawSpeed results:
```
| statistic name | baseline | proposed | Δ | % | |%| |
|----------------------------------------------------|-----------|-----------|--------:|--------:|-------:|
| asm-printer.EmittedInsts | 7945095 | 7942507 | -2588 | -0.03% | 0.03% |
| assembler.ObjectBytes | 273209920 | 273069800 | -140120 | -0.05% | 0.05% |
| early-cse.NumCSE | 2183363 | 2183398 | 35 | 0.00% | 0.00% |
| early-cse.NumSimplify | 541847 | 550017 | 8170 | 1.51% | 1.51% |
| instcombine.NumAggregateReconstructionsSimplified | 2139 | 108 | -2031 | -94.95% | 94.95% |
| instcombine.NumCombined | 3601364 | 3635448 | 34084 | 0.95% | 0.95% |
| instcombine.NumConstProp | 27153 | 27157 | 4 | 0.01% | 0.01% |
| instcombine.NumDeadInst | 1694521 | 1765022 | 70501 | 4.16% | 4.16% |
| instcombine.NumPHIsOfExtractValues | 0 | 37546 | 37546 | 0.00% | 0.00% |
| instcombine.NumSunkInst | 63158 | 63686 | 528 | 0.84% | 0.84% |
| instcount.NumBrInst | 874304 | 871857 | -2447 | -0.28% | 0.28% |
| instcount.NumCallInst | 1757657 | 1758402 | 745 | 0.04% | 0.04% |
| instcount.NumExtractValueInst | 45623 | 11483 | -34140 | -74.83% | 74.83% |
| instcount.NumInsertValueInst | 4983 | 580 | -4403 | -88.36% | 88.36% |
| instcount.NumInvokeInst | 61018 | 59478 | -1540 | -2.52% | 2.52% |
| instcount.NumLandingPadInst | 35334 | 34215 | -1119 | -3.17% | 3.17% |
| instcount.NumPHIInst | 344428 | 331116 | -13312 | -3.86% | 3.86% |
| instcount.NumRetInst | 100773 | 100772 | -1 | 0.00% | 0.00% |
| instcount.TotalBlocks | 1081154 | 1077166 | -3988 | -0.37% | 0.37% |
| instcount.TotalFuncs | 101443 | 101442 | -1 | 0.00% | 0.00% |
| instcount.TotalInsts | 8890201 | 8833747 | -56454 | -0.64% | 0.64% |
| instsimplify.NumSimplified | 75822 | 75707 | -115 | -0.15% | 0.15% |
| simplifycfg.NumHoistCommonCode | 24203 | 24197 | -6 | -0.02% | 0.02% |
| simplifycfg.NumHoistCommonInstrs | 48201 | 48195 | -6 | -0.01% | 0.01% |
| simplifycfg.NumInvokes | 2785 | 4298 | 1513 | 54.33% | 54.33% |
| simplifycfg.NumSimpl | 997332 | 1018189 | 20857 | 2.09% | 2.09% |
| simplifycfg.NumSinkCommonCode | 7088 | 6464 | -624 | -8.80% | 8.80% |
| simplifycfg.NumSinkCommonInstrs | 15117 | 14021 | -1096 | -7.25% | 7.25% |
```
... which tells us that this new fold fires whopping 38k times,
increasing the amount of SimplifyCFG's `invoke`->`call` transforms by +54% (+1513) (again, D85787 did that last time),
decreasing total instruction count by -0.64% (-56454),
and sharply decreasing count of `insertvalue`'s (-88.36%, i.e. 9 times less)
and `extractvalue`'s (-74.83%, i.e. four times less).
This causes geomean -0.01% binary size decrease
http://llvm-compile-time-tracker.com/compare.php?from=4d5ca22b8adfb6643466e4e9f48ba14bb48938bc&to=97dacca0111cb2ae678204e52a3cee00e3a69208&stat=size-text
and, ignoring `O0-g`, is a geomean -0.01%..-0.05% compile-time improvement
http://llvm-compile-time-tracker.com/compare.php?from=4d5ca22b8adfb6643466e4e9f48ba14bb48938bc&to=97dacca0111cb2ae678204e52a3cee00e3a69208&stat=instructions
The other thing that tells is, is that while this is a massive win for `invoke`->`call` transform
`InstCombinerImpl::foldAggregateConstructionIntoAggregateReuse()` fold,
which is supposed to be dealing with such aggregate reconstructions,
fires a lot less now. There are two reasons why:
1. After this fold, as it can be seen in tests, we may (will) end up with trivially redundant PHI nodes.
We don't CSE them in InstCombine presently, which means that EarlyCSE needs to run and then InstCombine rerun.
2. But then, EarlyCSE not only manages to fold such redundant PHI's,
it also sees that the extract-insert chain recreates the original aggregate,
and replaces it with the original aggregate.
The take-aways are
1. We maybe should do most trivial, same-BB PHI CSE in InstCombine
2. I need to check if what other patterns remain, and how they can be resolved.
(i.e. i wonder if `foldAggregateConstructionIntoAggregateReuse()` might go away)
This is a reland of the original commit fcb51d8c2460faa23b71e06abb7e826243887dd6,
because originally i forgot to ensure that the base aggregate types match.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86530
This reverts commit fcb51d8c2460faa23b71e06abb7e826243887dd6.
As buildbots report, there's apparently some missing check to ensure
that the types of incoming values match the type of PHI.
Let's revert for a moment.
While since D86306 we do it's sibling fold for `insertvalue`,
we should also do this for `extractvalue`'s.
And unlike that one, the results here are, quite honestly, shocking,
as it can be observed here on vanilla llvm test-suite + RawSpeed results:
```
| statistic name | baseline | proposed | Δ | % | |%| |
|----------------------------------------------------|-----------|-----------|--------:|--------:|-------:|
| asm-printer.EmittedInsts | 7945095 | 7942507 | -2588 | -0.03% | 0.03% |
| assembler.ObjectBytes | 273209920 | 273069800 | -140120 | -0.05% | 0.05% |
| early-cse.NumCSE | 2183363 | 2183398 | 35 | 0.00% | 0.00% |
| early-cse.NumSimplify | 541847 | 550017 | 8170 | 1.51% | 1.51% |
| instcombine.NumAggregateReconstructionsSimplified | 2139 | 108 | -2031 | -94.95% | 94.95% |
| instcombine.NumCombined | 3601364 | 3635448 | 34084 | 0.95% | 0.95% |
| instcombine.NumConstProp | 27153 | 27157 | 4 | 0.01% | 0.01% |
| instcombine.NumDeadInst | 1694521 | 1765022 | 70501 | 4.16% | 4.16% |
| instcombine.NumPHIsOfExtractValues | 0 | 37546 | 37546 | 0.00% | 0.00% |
| instcombine.NumSunkInst | 63158 | 63686 | 528 | 0.84% | 0.84% |
| instcount.NumBrInst | 874304 | 871857 | -2447 | -0.28% | 0.28% |
| instcount.NumCallInst | 1757657 | 1758402 | 745 | 0.04% | 0.04% |
| instcount.NumExtractValueInst | 45623 | 11483 | -34140 | -74.83% | 74.83% |
| instcount.NumInsertValueInst | 4983 | 580 | -4403 | -88.36% | 88.36% |
| instcount.NumInvokeInst | 61018 | 59478 | -1540 | -2.52% | 2.52% |
| instcount.NumLandingPadInst | 35334 | 34215 | -1119 | -3.17% | 3.17% |
| instcount.NumPHIInst | 344428 | 331116 | -13312 | -3.86% | 3.86% |
| instcount.NumRetInst | 100773 | 100772 | -1 | 0.00% | 0.00% |
| instcount.TotalBlocks | 1081154 | 1077166 | -3988 | -0.37% | 0.37% |
| instcount.TotalFuncs | 101443 | 101442 | -1 | 0.00% | 0.00% |
| instcount.TotalInsts | 8890201 | 8833747 | -56454 | -0.64% | 0.64% |
| instsimplify.NumSimplified | 75822 | 75707 | -115 | -0.15% | 0.15% |
| simplifycfg.NumHoistCommonCode | 24203 | 24197 | -6 | -0.02% | 0.02% |
| simplifycfg.NumHoistCommonInstrs | 48201 | 48195 | -6 | -0.01% | 0.01% |
| simplifycfg.NumInvokes | 2785 | 4298 | 1513 | 54.33% | 54.33% |
| simplifycfg.NumSimpl | 997332 | 1018189 | 20857 | 2.09% | 2.09% |
| simplifycfg.NumSinkCommonCode | 7088 | 6464 | -624 | -8.80% | 8.80% |
| simplifycfg.NumSinkCommonInstrs | 15117 | 14021 | -1096 | -7.25% | 7.25% |
```
... which tells us that this new fold fires whopping 38k times,
increasing the amount of SimplifyCFG's `invoke`->`call` transforms by +54% (+1513) (again, D85787 did that last time),
decreasing total instruction count by -0.64% (-56454),
and sharply decreasing count of `insertvalue`'s (-88.36%, i.e. 9 times less)
and `extractvalue`'s (-74.83%, i.e. four times less).
This causes geomean -0.01% binary size decrease
http://llvm-compile-time-tracker.com/compare.php?from=4d5ca22b8adfb6643466e4e9f48ba14bb48938bc&to=97dacca0111cb2ae678204e52a3cee00e3a69208&stat=size-text
and, ignoring `O0-g`, is a geomean -0.01%..-0.05% compile-time improvement
http://llvm-compile-time-tracker.com/compare.php?from=4d5ca22b8adfb6643466e4e9f48ba14bb48938bc&to=97dacca0111cb2ae678204e52a3cee00e3a69208&stat=instructions
The other thing that tells is, is that while this is a massive win for `invoke`->`call` transform
`InstCombinerImpl::foldAggregateConstructionIntoAggregateReuse()` fold,
which is supposed to be dealing with such aggregate reconstructions,
fires a lot less now. There are two reasons why:
1. After this fold, as it can be seen in tests, we may (will) end up with trivially redundant PHI nodes.
We don't CSE them in InstCombine presently, which means that EarlyCSE needs to run and then InstCombine rerun.
2. But then, EarlyCSE not only manages to fold such redundant PHI's,
it also sees that the extract-insert chain recreates the original aggregate,
and replaces it with the original aggregate.
The take-aways are
1. We maybe should do most trivial, same-BB PHI CSE in InstCombine
2. I need to check if what other patterns remain, and how they can be resolved.
(i.e. i wonder if `foldAggregateConstructionIntoAggregateReuse()` might go away)
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86530
For a long time, the InstCombine pass handled target specific
intrinsics. Having target specific code in general passes was noted as
an area for improvement for a long time.
D81728 moves most target specific code out of the InstCombine pass.
Applying the target specific combinations in an extra pass would
probably result in inferior optimizations compared to the current
fixed-point iteration, therefore the InstCombine pass resorts to newly
introduced functions in the TargetTransformInfo when it encounters
unknown intrinsics.
The patch should not have any effect on generated code (under the
assumption that code never uses intrinsics from a foreign target).
This introduces three new functions:
TargetTransformInfo::instCombineIntrinsic
TargetTransformInfo::simplifyDemandedUseBitsIntrinsic
TargetTransformInfo::simplifyDemandedVectorEltsIntrinsic
A few target specific parts are left in the InstCombine folder, where
it makes sense to share code. The largest left-over part in
InstCombineCalls.cpp is the code shared between arm and aarch64.
This allows to move about 3000 lines out from InstCombine to the targets.
Differential Revision: https://reviews.llvm.org/D81728
This patch adds simplification for pattern:
```
if (cond)
/ \
... ...
\ /
p = phi [true] [false]
...
br p, succ_1, succ_2
```
If we can prove that top block's branches dominate respective
inputs of a block that has a Phi with constant inputs, we can
use the branch condition (maybe inverted) instead of Phi.
This will make proofs of implication for further jump threading
more transparent.
Differential Revision: https://reviews.llvm.org/D81375
Reviewed By: xbolva00
The fact that loads and stores can have the alignment missing is a
constant source of confusion: code that usually works can break down in
rare cases. So fix the LoadInst API so the alignment is never missing.
To reduce the number of changes required to make this work, IRBuilder
and certain LoadInst constructors will grab the module's datalayout and
compute the alignment automatically. This is the same alignment
instcombine would eventually apply anyway; we're just doing it earlier.
There's a minor risk that the way we're retrieving the datalayout
could break out-of-tree code, but I don't think that's likely.
This is the last in a series of patches, so most of the necessary
changes have already been merged.
Differential Revision: https://reviews.llvm.org/D77454
getFirstInsertionPt's return value must be checked for validity before
casting it to Instruction*. Don't attempt to insert casts after a phi in
a catchswitch block.
Fixes PR45033, introduced in D37832.
Reviewed By: davidxl, hfinkel
Differential Revision: https://reviews.llvm.org/D75381
getFirstNonPHI iterates over all the instructions in a block until it
finds a non-PHI.
Then, the loop starts from the beginning of the block and goes through
all the instructions until it reaches the instruction found by
getFirstNonPHI.
Instead of doing that, just stop when a non-PHI is found.
This reduces the compile-time of a test case discussed in
https://reviews.llvm.org/D47023 by 13x.
Not entirely sure how to come up with a test case for this since it's a
compile time issue that would significantly slow down running the tests.
Differential Revision: https://reviews.llvm.org/D70016
This is a resubmission of bbb29738b58aaf6f6518269abdcf8f64131665a9 that
was reverted due to clang tests failures. It includes the fix and
additional IR tests for the missed case.
Summary:
In case when all incoming values of a PHI are equal pointers, this
transformation inserts a definition of such a pointer right after
definition of the base pointer and replaces with this value both PHI and
all it's incoming pointers. Primary goal of this transformation is
canonicalization of this pattern in order to enable optimizations that
can't handle PHIs. Non-inbounds pointers aren't currently supported.
Reviewers: spatel, RKSimon, lebedev.ri, apilipenko
Reviewed By: apilipenko
Tags: #llvm
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D68128
