Of the 128-bits of buffer descriptor only 48 bits are address bits, so
following the discussion on https://discourse.llvm.org/t/clarifiying-the-semantics-of-ptrtoint/83987/54,
the logic conclusion is to set the index width to 48 bits instead of
the current value of 128.
Most of the test changes are mechanical datalayout updates, but there
is one actual change: the ptrmask test now uses .i48 instead of .i128
and I had to update SelectionDAGBuilder to correctly extend the mask.
Reviewed By: krzysz00
Pull Request: https://github.com/llvm/llvm-project/pull/139419
This is an alternative to
https://github.com/llvm/llvm-project/pull/122103
In SPIR-V, private global variables have the Private storage class. This
PR adds a new address space which allows frontend to emit variable with
this storage class when targeting this backend.
This is covered in this proposal: llvm/wg-hlsl@4c9e11a
This PR will cause addrspacecast to show up in several cases, like class
member functions or assignment. Those will have to be handled in the
backend later on, particularly to fixup pointer storage classes in some
functions.
Before this change, global variable were emitted with the 'Function'
storage class, which was wrong.
This patch introduces the `vmem-to-lds-load-insts` target feature, which
can be used to enable builtins `__builtin_amdgcn_global_load_lds` and
`__builtin_amdgcn_raw_ptr_buffer_load_lds` on platforms which have this
feature.
This feature is only available on gfx9/10.
A limitation of using a common target feature for both builtins is that
we could have made `__builtin_amdgcn_raw_ptr_buffer_load_lds` available
on gfx6,7,8.
Add option and statement attribute for controlling emitting of
target-specific
metadata to atomicrmw instructions in IR.
The RFC for this attribute and option is
https://discourse.llvm.org/t/rfc-add-clang-atomic-control-options-and-pragmas/80641,
Originally a pragma was proposed, then it was changed to clang
attribute.
This attribute allows users to specify one, two, or all three options
and must be applied
to a compound statement. The attribute can also be nested, with inner
attributes
overriding the options specified by outer attributes or the target's
default
options. These options will then determine the target-specific metadata
added to atomic
instructions in the IR.
In addition to the attribute, three new compiler options are introduced:
`-f[no-]atomic-remote-memory`, `-f[no-]atomic-fine-grained-memory`,
`-f[no-]atomic-ignore-denormal-mode`.
These compiler options allow users to override the default options
through the
Clang driver and front end. `-m[no-]unsafe-fp-atomics` is aliased to
`-f[no-]ignore-denormal-mode`.
In terms of implementation, the atomic attribute is represented in the
AST by the
existing AttributedStmt, with minimal changes to AST and Sema.
During code generation in Clang, the CodeGenModule maintains the current
atomic options,
which are used to emit the relevant metadata for atomic instructions.
RAII is used
to manage the saving and restoring of atomic options when entering
and exiting nested AttributedStmt.
This both reapplies #118734, the initial attempt at this, and updates it
significantly.
First, it uses the newly added `StringTable` abstraction for string
tables, and simplifies the construction to build the string table and
info arrays separately. This should reduce any `constexpr` compile time
memory or CPU cost of the original PR while significantly improving the
APIs throughout.
It also restructures the builtins to support sharding across several
independent tables. This accomplishes two improvements from the
original PR:
1) It improves the APIs used significantly.
2) When builtins are defined from different sources (like SVE vs MVE in
AArch64), this allows each of them to build their own string table
independently rather than having to merge the string tables and info
structures.
3) It allows each shard to factor out a common prefix, often cutting the
size of the strings needed for the builtins by a factor two.
The second point is important both to allow different mechanisms of
construction (for example a `.def` file and a tablegen'ed `.inc` file,
or different tablegen'ed `.inc files), it also simply reduces the sizes
of these tables which is valuable given how large they are in some
cases. The third builds on that size reduction.
Initially, we use this new sharding rather than merging tables in
AArch64, LoongArch, RISCV, and X86. Mostly this helps ensure the system
works, as without further changes these still push scaling limits.
Subsequent commits will more deeply leverage the new structure,
including using the prefix capabilities which cannot be easily factored
out here and requires deep changes to the targets.
Introduces a new address space `hlsl_constant(2)` for constant buffer
declarations.
This address space is applied to declarations inside `cbuffer` block.
Later on, it will also be applied to `ConstantBuffer<T>` syntax and the
default `$Globals` constant buffer.
Clang codegen translates constant buffer declarations to global
variables and loads from `hlsl_constant(2)` address space. More work
coming soon will include addition of metadata that will map these
globals to individual constant buffers and enable their transformation
to appropriate constant buffer load intrinsics later on in an LLVM pass.
Fixes#123406
Reverts llvm/llvm-project#118734
There are currently some specific versions of MSVC that are miscompiling
this code (we think). We don't know why as all the other build bots and
at least some folks' local Windows builds work fine.
This is a candidate revert to help the relevant folks catch their
builders up and have time to debug the issue. However, the expectation
is to roll forward at some point with a workaround if at all possible.
The Clang binary (and any binary linking Clang as a library), when built
using PIE, ends up with a pretty shocking number of dynamic relocations
to apply to the executable image: roughly 400k.
Each of these takes up binary space in the executable, and perhaps most
interestingly takes start-up time to apply the relocations.
The largest pattern I identified were the strings used to describe
target builtins. The addresses of these string literals were stored into
huge arrays, each one requiring a dynamic relocation. The way to avoid
this is to design the target builtins to use a single large table of
strings and offsets within the table for the individual strings. This
switches the builtin management to such a scheme.
This saves over 100k dynamic relocations by my measurement, an over 25%
reduction. Just looking at byte size improvements, using the `bloaty`
tool to compare a newly built `clang` binary to an old one:
```
FILE SIZE VM SIZE
-------------- --------------
+1.4% +653Ki +1.4% +653Ki .rodata
+0.0% +960 +0.0% +960 .text
+0.0% +197 +0.0% +197 .dynstr
+0.0% +184 +0.0% +184 .eh_frame
+0.0% +96 +0.0% +96 .dynsym
+0.0% +40 +0.0% +40 .eh_frame_hdr
+114% +32 [ = ] 0 [Unmapped]
+0.0% +20 +0.0% +20 .gnu.hash
+0.0% +8 +0.0% +8 .gnu.version
+0.9% +7 +0.9% +7 [LOAD #2 [R]]
[ = ] 0 -75.4% -3.00Ki .relro_padding
-16.1% -802Ki -16.1% -802Ki .data.rel.ro
-27.3% -2.52Mi -27.3% -2.52Mi .rela.dyn
-1.6% -2.66Mi -1.6% -2.66Mi TOTAL
```
We get a 16% reduction in the `.data.rel.ro` section, and nearly 30%
reduction in `.rela.dyn` where those reloctaions are stored.
This is also visible in my benchmarking of binary start-up overhead at
least:
```
Benchmark 1: ./old_clang --version
Time (mean ± σ): 17.6 ms ± 1.5 ms [User: 4.1 ms, System: 13.3 ms]
Range (min … max): 14.2 ms … 22.8 ms 162 runs
Benchmark 2: ./new_clang --version
Time (mean ± σ): 15.5 ms ± 1.4 ms [User: 3.6 ms, System: 11.8 ms]
Range (min … max): 12.4 ms … 20.3 ms 216 runs
Summary
'./new_clang --version' ran
1.13 ± 0.14 times faster than './old_clang --version'
```
We get about 2ms faster `--version` runs. While there is a lot of noise
in binary execution time, this delta is pretty consistent, and
represents over 10% improvement. This is particularly interesting to me
because for very short source files, repeatedly starting the `clang`
binary is actually the dominant cost. For example, `configure` scripts
running against the `clang` compiler are slow in large part because of
binary start up time, not the time to process the actual inputs to the
compiler.
----
This PR implements the string tables using `constexpr` code and the
existing macro system. I understand that the builtins are moving towards
a TableGen model, and if complete that would provide more options for
modeling this. Unfortunately, that migration isn't complete, and even
the parts that are migrated still rely on the ability to break out of
the TableGen model and directly expand an X-macro style `BUILTIN(...)`
textually. I looked at trying to complete the move to TableGen, but it
would both require the difficult migration of the remaining targets, and
solving some tricky problems with how to move away from any macro-based
expansion.
I was also able to find a reasonably clean and effective way of doing
this with the existing macros and some `constexpr` code that I think is
clean enough to be a pretty good intermediate state, and maybe give a
good target for the eventual TableGen solution. I was also able to
factor the macros into set of consistent patterns that avoids a
significant regression in overall boilerplate.
Adds a new address spaces: `hlsl_private`. Variables with such address
space will be emitted with a `Private` storage class.
This is useful for variables global to a SPIR-V module, since up to now,
they were still emitted with a `Function` storage class, which is wrong.
---------
Signed-off-by: Nathan Gauër <brioche@google.com>
So far, these macros can be used in contexts where no meaningful
wavefront size is available. We therefore deprecate these macros, to
replace them with a more resilient interface to access wavefront size
information where it is available.
Reapplies #112849 with a fix for the non-hermetic clang test that failed
on Mac after the revert in #115499.
For SWDEV-491529.
So far, these macros can be used in contexts where no meaningful
wavefront size is available. We therefore deprecate these macros, to
replace them with a more resilient interface to access wavefront size
information where it is available.
For SWDEV-491529.
Currently, for AMDGPU, when compiling for OpenCL, we unconditionally use
`private` as the default address space. This is wrong for cases where
the `generic` address space is available, and is corrected via this
patch. In general, this AS map abuse is a bad hack and we should re-work
it altogether, but at least after this patch we will stop being
incorrect for e.g. OpenCL 2.0.
The dot is too confusing for tools. Output temporaries would have
'10.3-generic' so tools could parse it as an extension, device libs &
the associated clang driver logic are also confused by the dot.
After discussions, we decided it's better to just remove the '.' from
the target name than fix each issue one by one.
These generic targets include multiple GPUs and will, in the future,
provide a way to build once and run on multiple GPU, at the cost of less
optimization opportunities.
Note that this is just doing the compiler side of things, device libs an
runtimes/loader/etc. don't know about these targets yet, so none of them
actually work in practice right now. This is just the initial commit to
make LLVM aware of them.
This contains the documentation changes for both this change and #76954
as well.
Summary:
Currently, the AMDGPU toolchain accepts not passing `-mcpu` as a means
to create a sort of "generic" IR. The resulting IR will not contain any
target dependent attributes and can then be inserted into another
program via `-mlink-builtin-bitcode` to inherit its attributes.
However, there are a handful of macros that can leak incorrect
information when compiling for an unspecified architecture. Currently,
things like the wavefront size will default to 64, which is actually
variable. We should not expose these macros unless it is known.
This reverts commit c9a6e993f7b349405b6c8f9244cd9cf0f56a6a81.
This breaks HIP code that incorrectly depended on GPU-specific macros to
be set. The code is totally wrong as using `__WAVEFRTONSIZE__` on the
host is absolutely meaningless, but it seems this entire corner of the
toolchain is fundmentally broken. Reverting for now to avoid breakages.
Summary:
Currently, the AMDGPU toolchain accepts not passing `-mcpu` as a means
to create a sort of "generic" IR. The resulting IR will not contain any
target dependent attributes and can then be inserted into another
program via `-mlink-builtin-bitcode` to inherit its attributes.
However, there are a handful of macros that can leak incorrect
information when compiling for an unspecified architecture. Currently,
things like the wavefront size will default to 64, which is actually
variable. We should not expose these macros unless it is known.
This is an experimental address space for strided buffers. These buffers
can have structs as elements and
a stride > 1.
These pointers allow the indexed access in units of stride, i.e., they
point at `buffer[index * stride]`.
Thus, we can use the `idxen` modifier for buffer loads.
We assign address space 9 to 192-bit buffer pointers which contain a
128-bit descriptor, a 32-bit offset and a 32-bit index. Essentially,
they are fat buffer pointers with an additional 32-bit index.
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
Types of AMDGPU address space were defined not only in Clang-specific class
but also in LLVM header.
If we unify the AMD GPU address space enumeration, then we can reuse it in
Clang, Flang and LLVM.
rename it to __AMDGCN_WAVEFRONT_SIZE__ for consistency.
__AMDGCN_WAVEFRONT_SIZE will be deprecated in the future.
Reviewed by: Matt Arsenault, Johannes Doerfert
Differential Revision: https://reviews.llvm.org/D154207
HIP texture/image support is optional as some devices
do not have image instructions. A macro __HIP_NO_IMAGE_SUPPORT
is defined for device not supporting images (d0448aa4c4/docs/reference/kernel_language.md (L426) )
Currently the macro is defined by HIP header based on predefined macros
for GPU, e.g __gfx*__ , which is error prone. This patch let clang
emit the predefined macro.
Reviewed by: Matt Arsenault, Artem Belevich
Differential Revision: https://reviews.llvm.org/D151349
Predefine __AMDGCN_CUMODE__ as 1 or 0 when compilation assumes CU or WGP modes.
If WGP mode is not supported, ignore -mno-cumode and emit a warning.
This is needed for implementing device functions like __smid
(312dff7b79/include/hip/amd_detail/amd_device_functions.h (L957))
Reviewed by: Matt Arsenault, Artem Belevich, Brian Sumner
Differential Revision: https://reviews.llvm.org/D145343
Re-land D145441 with data layout upgrade code fixed to not break OpenMP.
This reverts commit 3f2fbe92d0f40bcb46db7636db9ec3f7e7899b27.
Differential Revision: https://reviews.llvm.org/D149776
Per discussion at
https://discourse.llvm.org/t/representing-buffer-descriptors-in-the-amdgpu-target-call-for-suggestions/68798,
we define two new address spaces for AMDGCN targets.
The first is address space 7, a non-integral address space (which was
already in the data layout) that has 160-bit pointers (which are
256-bit aligned) and uses a 32-bit offset. These pointers combine a
128-bit buffer descriptor and a 32-bit offset, and will be usable with
normal LLVM operations (load, store, GEP). However, they will be
rewritten out of existence before code generation.
The second of these is address space 8, the address space for "buffer
resources". These will be used to represent the resource arguments to
buffer instructions, and new buffer intrinsics will be defined that
take them instead of <4 x i32> as resource arguments. ptr
addrspace(8). These pointers are 128-bits long (with the same
alignment). They must not be used as the arguments to getelementptr or
otherwise used in address computations, since they can have
arbitrarily complex inherent addressing semantics that can't be
represented in LLVM. Even though, like their address space 7 cousins,
these pointers have deterministic ptrtoint/inttoptr semantics, they
are defined to be non-integral in order to prevent optimizations that
rely on pointers being a [0, [addr_max]] value from applying to them.
Future work includes:
- Defining new buffer intrinsics that take ptr addrspace(8) resources.
- A late rewrite to turn address space 7 operations into buffer
intrinsics and offset computations.
This commit also updates the "fallback address space" for buffer
intrinsics to the buffer resource, and updates the alias analysis
table.
Depends on D143437
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D145441
Scope of changes:
1) Extract common code between Clang and Flang for parsing AMDGPU features
2) Add function which adds implicit target features for AMDGPU as Clang does
3) Add AMDGPU target as one of valid targets for Flang
Differential Revision: https://reviews.llvm.org/D145579
Reviewed By: yaxunl, awarzynski
Change target feature of __builtin_amdgcn_global_atomic_fadd_f32
to atomic-fadd-rtn-insts. Enable atomic-fadd-rtn-insts for gfx90a,
gfx940 and gfx1100 as they all support the return variant of
`global_atomic_add_f32`.
Fixes https://github.com/llvm/llvm-project/issues/61331.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D146840
Reorganize clang::Builtin::Info to have them naturally align on 4 bytes
boundaries.
Instead of storing builtin headers as a straight char pointer, enumerate
them and store the enum. It allows to use a small enum instead of a
pointer to reference them.
On a 64 bit machine, this brings sizeof(clang::Builtin::Info) from 56
down to 48 bytes.
On a release build on my Linux 64 bit machine, it shrinks the size of
libclang-cpp.so by 193kB.
The impact on performance is negligible in terms of instruction count,
but the wall time seems better, see
https://llvm-compile-time-tracker.com/compare.php?from=b3d8639f3536a4876b511aca9fb7948ff9266cee&to=a89b56423f98b550260a58c41e64aff9e56b76be&stat=task-clock
Differential Revision: https://reviews.llvm.org/D142024
This was only used for checking if is_shared/is_private were legal,
which we're not bothering to do anymore.
This is apparently visible to more than the target attribute (which
seems to silently ignore unrecognized features), so this has the
potential to break something (i.e. see the OpenMP test change)
Use explicit _w32/_w64 suffixes for the wave size to be consistent
with the existing other wave dependent intrinsics. Also start
diagnosing trying to use both wave32 and wave64.
I would have preferred to avoid the +wavefrontsize64 spam on targets
where that's the only option, but avoiding this seems to be more work
than I expected.
This avoids recomputing string length that is already known at compile time.
It has a slight impact on preprocessing / compile time, see
https://llvm-compile-time-tracker.com/compare.php?from=3f36d2d579d8b0e8824d9dd99bfa79f456858f88&to=e49640c507ddc6615b5e503144301c8e41f8f434&stat=instructions:u
This a recommit of e953ae5bbc313fd0cc980ce021d487e5b5199ea4 and the subsequent fixes caa713559bd38f337d7d35de35686775e8fb5175 and 06b90e2e9c991e211fecc97948e533320a825470.
The above patchset caused some version of GCC to take eons to compile clang/lib/Basic/Targets/AArch64.cpp, as spotted in aa171833ab0017d9732e82b8682c9848ab25ff9e.
The fix is to make BuiltinInfo tables a compilation unit static variable, instead of a private static variable.
Differential Revision: https://reviews.llvm.org/D139881
- [Clang] Declare AMDGPU target as supporting BF16 for storage-only purposes on amdgcn
- Add Sema & CodeGen tests cases.
- Also add cases that D138651 would have covered as this patch replaces it.
- [AMDGPU] Add BF16 storage-only support
- Support legalization/dealing with bf16 operations in DAGIsel.
- bf16 as a type remains illegal and is represented as i16 for storage purposes.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D139398
Mixing LLVM and Clang address spaces can result in subtle bugs, and there
is no need for this hook to use the LLVM IR level address spaces.
Most of this change is just replacing zero with LangAS::Default,
but it also allows us to remove a few calls to getTargetAddressSpace().
This also removes a stale comment+workaround in
CGDebugInfo::CreatePointerLikeType(): ASTContext::getTypeSize() does
return the expected size for ReferenceType (and handles address spaces).
Differential Revision: https://reviews.llvm.org/D138295
Added keyword, LangAS and TypeAttrbute for groupshared.
Tanslate it to LangAS with asHLSLLangAS.
Make sure it translated into address space 3 for DirectX target.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D135060
