Currently, JT creates and updates local instances of BPI\BFI. As a result global ones have to be invalidated if JT made any changes.
In fact, JT doesn't use any information from BPI/BFI for the sake of the transformation itself. It only creates BPI/BFI to keep them up to date. But since it updates local copies (besides cases when it updates profile metadata) it just waste of time.
Current patch is a rework of D124439. D124439 makes one step and replaces local copies with global ones retrieved through AnalysisPassManager. Here we do one more step and don't create BPI/BFI if the only reason of creation is to keep BPI/BFI up to date. Overall logic is the following. If there is cached BPI/BFI then update it along the transformations. If there is no existing BPI/BFI, then create it only if it is required to update profile metadata.
Please note if BPI/BFI exists on exit from JT (either cached or created) it is always up to date and no reason to invalidate it.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D136827
Currently, JT creates and updates local instances of BPI\BFI. As a result global ones have to be invalidated if JT made any changes.
In fact, JT doesn't use any information from BPI/BFI for the sake of the transformation itself. It only creates BPI/BFI to keep them up to date. But since it updates local copies (besides cases when it updates profile metadata) it just waste of time.
Current patch is a rework of D124439. D124439 makes one step and replaces local copies with global ones retrieved through AnalysisPassManager. Here we do one more step and don't create BPI/BFI if the only reason of creation is to keep BPI/BFI up to date. Overall logic is the following. If there is cached BPI/BFI then update it along the transformations. If there is no existing BPI/BFI, then create it only if it is required to update profile metadata.
Please note if BPI/BFI exists on exit from JT (either cached or created) it is always up to date and no reason to invalidate it.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D136827
Jump threading can replace select and unconditional branch with
conditional branch, but when doing so loses profile information.
This destructive transform can eventually lead to a performance
degradation due to folding of branches in
shouldFoldCondBranchesToCommonDestination as branch probabilities
are no longer known.
The first version was reverted due to assert caused by i32 overflow,
fixed in this version.
Patch by Roman Paukner!
Differential Revision: https://reviews.llvm.org/D138132
Reviewed By: mkazantsev
This reverts commit 957952dbf2f34ed552e8e1f8c35eed17eee2ea38.
Addition in the newly added code can overflow. As a result, the
constructor of `BranchProbability()` can trigger an assertion. See
the discussion on https://reviews.llvm.org/D138132 for more details.
Jump threading can replace select and unconditional branch with
conditional branch, but when doing so loses profile information.
This destructive transform can eventually lead to a performance
degradation due to folding of branches in
shouldFoldCondBranchesToCommonDestination as branch probabilities
are no longer known.
Patch by Roman Paukner!
Differential Revision: https://reviews.llvm.org/D138132
Reviewed By: mkazantsev
JumpThreading may convert selects into branch instructions,
in which case the condition needs to be frozen (as branch on
poison is immediate undefined behavior, unlike select on poison).
The necessary code for this is already in place, this just enables
the option.
Differential Revision: https://reviews.llvm.org/D125869
If the block being cloned contains a PHI node, in general, we need to
clone that PHI node, even though it's trivial. If the operand of the PHI
is an instruction in the block being cloned, the correct value for the
operand doesn't exist until SSAUpdater constructs it.
We usually don't hit this issue because we try to avoid threading across
loop headers, but it's possible to hit this in some cases involving
irreducible CFGs. I added a flag to allow threading across loop headers
to make the testcase easier to understand.
Thanks to Brian Rzycki for reducing the testcase.
Fixes https://bugs.llvm.org/show_bug.cgi?id=42085.
Differential Revision: https://reviews.llvm.org/D63913
llvm-svn: 365094
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
Currently when a select has a constant value in one branch and the select feeds
a conditional branch (via a compare/ phi and compare) we unfold the select
statement. This results in threading the conditional branch later on. Similar
opportunity exists when a select (with a constant in one branch) feeds a
switch (via a phi node). The patch unfolds select under this condition.
A testcase is provided.
llvm-svn: 350931
JumpThreading iterates over F until the IR quiesces. Transforming
unreachable BBs increases compile time and it is also possible to
never stabilize causing JumpThreading to hang. An older attempt at
fixing this problem was D3991 where removeUnreachableBlocks(F)
was called before JumpThreading began. This has a few drawbacks:
* expensive - the routine attempts to fix up the IR to identify
additional BBs that can be removed along with unreachable BBs.
* aggressive - does not identify and preserve the shape of the IR.
At a minimum it does not preserve loop hierarchies.
* invasive - altering reachable blocks it may disrupt IR shapes
that could have otherwise been JumpThreaded.
This patch avoids removeUnreachableBlocks(F) and instead tracks
unreachable BBs in a SmallPtrSet using DominatorTree to validate the
initial state of all BBs. We then rely on subsequent passes to identify
and remove these unreachable blocks from F.
Reviewers: dberlin, sebpop, kuhar, dinesh.d
Reviewed by: sebpop, kuhar
Subscribers: hiraditya, uabelho, llvm-commits
Differential Revision: https://reviews.llvm.org/D44177
llvm-svn: 327713
Add the following pattern to TryToUnfoldSelectInCurrBB()
bb:
%p = phi [0, %bb1], [1, %bb2], [0, %bb3], [1, %bb4], ...
%c = cmp %p, 0
%s = select %c, trueval, falseval
The Select in the above pattern will be unfolded and then jump-threaded. The
current implementation does not allow CMP in the middle of PHI and Select.
Differential Revision: https://reviews.llvm.org/D34762
llvm-svn: 308050
Look for PHI/Select in the same BB of the form
bb:
%p = phi [false, %bb1], [true, %bb2], [false, %bb3], [true, %bb4], ...
%s = select p, trueval, falseval
And expand the select into a branch structure. This later enables
jump-threading over bb in this pass.
Using the similar approach of SimplifyCFG::FoldCondBranchOnPHI(), unfold
select if the associated PHI has at least one constant. If the unfolded
select is not jump-threaded, it will be folded again in the later
optimizations.
llvm-svn: 257198
The code that was meant to adjust the duplication cost based on the
terminator opcode was not being executed in cases where the initial
threshold was hit inside the loop.
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D15536
llvm-svn: 256568
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
This patch add code to remove unreachable blocks from function
as they may cause jump threading to stuck in infinite loop.
Differential Revision: http://reviews.llvm.org/D3991
llvm-svn: 211103
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186268
switch, make sure we include the value for the cases when calculating edge
value from switch to the default destination.
rdar://12241132
llvm-svn: 163270
When it sees a promising select it now tries to figure out whether the condition of the select is known in any of the predecessors and if so it maps the operands appropriately.
llvm-svn: 121859
