The forwarding header is left in place because of its use in
`polly/lib/External/isl/interface/extract_interface.cc`, but I have
added a GCC warning about the fact it is deprecated, because it is used
in `isl` from where it is included by Polly.
This adds the jump slot mapping for LoongArch. This is a simple
change that ensures lldb running properly.
Note that this problem was found only when CMake variables
"DLLVM_ENABLE_ASSERTIONS=ON" is selected.
Without this patch,
```
$ build/bin/lldb test
../ELFHeader::GetRelocationJumpSlotType() const: Assertion `false && "architecture not supported"' fail
```
With this patch
```
$ build/bin/lldb test
(lldb) target create "test"
Current executable set to '../test' (loongarch64).
```
Reviewed By: SixWeining, DavidSpickett
Differential Revision: https://reviews.llvm.org/D141245
Limit trusting the arange accelerator tables (8b259fe573e1) to dSYMs
only, and not any debug info object file.
Differential revision: https://reviews.llvm.org/D141330
In preparation for eanbling 64bit support in LLDB switching to use llvm::formatv
instead of format MACROs.
Reviewed By: labath, JDevlieghere
Differential Revision: https://reviews.llvm.org/D139955
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
std::optional::value() has undesired exception checking semantics and is
unavailable in some older Xcode. The call sites block std::optional migration.
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
It's fine right now, but will break as soon as someone else declares a
PluginProperties class in the same way.
Also tighten up the scope of the anonymous namespaces surrounding the
other PluginProperties classes.
Both LLD and GNU ld write global/static variables to the COFF symbol
table with `IMAGE_SYM_TYPE_NULL` and `IMAGE_SYM_DTYPE_NULL` type. Map
these symbols as 'Data' type in the symtab to allow these symbols to be
used in expressions and printable.
Reviewed By: labath, DavidSpickett
Differential Revision: https://reviews.llvm.org/D134585
Forwarder exports do not point to a real function or variable. Instead
they point to a string describing which DLL and symbol to forward to.
Any imports which uses them will be redirected by the loader
transparently. These symbols do not have much use in LLDB, but keep them
just in case someone find it useful. Also set a synthesized name with
the forwarder string for informational purpose.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D134518
If a symbol is the same as an export symbol, mark it as 'Additional' to
prevent the duplicated symbol from being repeated in some commands (e.g.
`disas -n func`). If the RVA is the same but exported with a different
name, only synchronize the symbol types.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D134426
- Skip dummy/invalid export symbols.
- Make the export ordinal of export symbols visible when dumping the
symtab.
- Stop setting the 'Debug' flag and set the 'External' flag instead to
better match the meaning of export symbols.
- Try to guess the type (code vs data) of the symbol from section flags.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D134265
This reimplements `ObjectFilePECOFF::ParseSymtab` to replace the manual
data extraction with what `COFFObjectFile` already provides. Also use
`SymTab::AddSymbol` instead of resizing the SymTab then assigning each
elements afterwards.
Previously, ParseSymTab loads symbols from both the COFF symbol table
and the export table, but if there are any entries in the export table,
it overwrites all the symbols already loaded from the COFF symbol table.
Due to the change to use AddSymbols, this no longer happens, and so the
SymTab now contains all symbols from both tables as expected.
The export symbols are now ordered by ordinal, instead of by the name
table order.
In its current state, it is possible for symbols in the COFF symbol
table to be duplicated by those in the export table. This behaviour will
be modified in a separate change.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D134196
Add support for recognizing a platform binary in the ObjectFileMachO
method that parses the "load binary" LC_NOTEs in a corefile.
A bit of reorganization to ProcessMachCore::DoLoadCore to separate
all of the unrelated things being done in that method into their own
separate methods, as well as small fixes to improve the handling of
a corefile with multiple kernel images in the corefile.
Differential Revision: https://reviews.llvm.org/D133680
rdar://98754861
I encountered an issue where `p &variable` was finding an incorrect address for
32-bit PIC ELF files loaded into a running process. The problem was that the
R_386_32 ELF relocations were not being applied to the DWARF section, so all
variables in that file were reporting as being at the start of their respective
section. There is an assert that catches this on debug builds, but silently
ignores the issue on non-debug builds.
In this changeset, I added handling for the R_386_32 relocation type to
ObjectFileELF, and a supporting function to ELFRelocation to differentiate
between DT_REL & DT_RELA in ObjectFileELF::ApplyRelocations().
Demonstration of issue:
```
[dmlary@host work]$ cat rel.c
volatile char padding[32] = "make sure var isnt at .data+0";
volatile char var[] = "test";
[dmlary@host work]$ gcc -c rel.c -FPIC -fpic -g -m32
[dmlary@host work]$ lldb ./exec
(lldb) target create "./exec"
Current executable set to '/home/dmlary/src/work/exec' (i386).
(lldb) process launch --stop-at-entry
Process 21278 stopped
* thread #1, name = 'exec', stop reason = signal SIGSTOP
frame #0: 0xf7fdb150 ld-2.17.so`_start
ld-2.17.so`_start:
-> 0xf7fdb150 <+0>: movl %esp, %eax
0xf7fdb152 <+2>: calll 0xf7fdb990 ; _dl_start
ld-2.17.so`_dl_start_user:
0xf7fdb157 <+0>: movl %eax, %edi
0xf7fdb159 <+2>: calll 0xf7fdb140
Process 21278 launched: '/home/dmlary/src/work/exec' (i386)
(lldb) image add ./rel.o
(lldb) image load --file rel.o .text 0x40000000 .data 0x50000000
section '.text' loaded at 0x40000000
section '.data' loaded at 0x50000000
(lldb) image dump symtab rel.o
Symtab, file = rel.o, num_symbols = 13:
Debug symbol
|Synthetic symbol
||Externally Visible
|||
Index UserID DSX Type File Address/Value Load Address Size Flags Name
------- ------ --- --------------- ------------------ ------------------ ------------------ ---------- ----------------------------------
[ 0] 1 SourceFile 0x0000000000000000 0x0000000000000000 0x00000004 rel.c
[ 1] 2 Invalid 0x0000000000000000 0x0000000000000020 0x00000003
[ 2] 3 Invalid 0x0000000000000000 0x50000000 0x0000000000000020 0x00000003
[ 3] 4 Invalid 0x0000000000000025 0x0000000000000000 0x00000003
[ 4] 5 Invalid 0x0000000000000000 0x0000000000000020 0x00000003
[ 5] 6 Invalid 0x0000000000000000 0x0000000000000020 0x00000003
[ 6] 7 Invalid 0x0000000000000000 0x0000000000000020 0x00000003
[ 7] 8 Invalid 0x0000000000000000 0x0000000000000020 0x00000003
[ 8] 9 Invalid 0x0000000000000000 0x0000000000000020 0x00000003
[ 9] 10 Invalid 0x0000000000000000 0x0000000000000020 0x00000003
[ 10] 11 Invalid 0x0000000000000000 0x0000000000000020 0x00000003
[ 11] 12 X Data 0x0000000000000000 0x50000000 0x0000000000000020 0x00000011 padding
[ 12] 13 X Data 0x0000000000000020 0x50000020 0x0000000000000005 0x00000011 var
(lldb) p &var
(volatile char (*)[5]) $1 = 0x50000000
```
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D132954
LLVM contains a helpful function for getting the size of a C-style
array: `llvm::array_lengthof`. This is useful prior to C++17, but not as
helpful for C++17 or later: `std::size` already has support for C-style
arrays.
Change call sites to use `std::size` instead.
Differential Revision: https://reviews.llvm.org/D133501
Previously, depending on how you constructed a UUID from data or a
StringRef, an input value of all zeros was valid (e.g. setFromData)
or not (e.g. setFromOptionalData). Since there was no way to tell
which interpretation to use, it was done somewhat inconsistently.
This standardizes the meaning of a UUID of all zeros to Not Valid,
and removes all the Optional methods and their uses, as well as the
static factories that supported them.
Differential Revision: https://reviews.llvm.org/D132191
This patch teaches LLDB about Mach-O filesets. Filsets are Mach-O files
that contain a bunch of other Mach-O files. Unlike universal binaries,
which have a different header, Filesets use load commands to describe
the different entries it contains.
Differential revision: https://reviews.llvm.org/D132433
Symbols that have the section index of SHN_ABS were previously creating extra top level sections that contained the value of the symbol as if the symbol's value was an address. As far as I can tell, these symbol's values are not addresses, even if they do have a size. To make matters worse, adding these extra sections can stop address lookups from succeeding if the symbol's value + size overlaps with an existing section as these sections get mapped into memory when the image is loaded by the dynamic loader. This can cause stack frames to appear empty as the address lookup fails completely.
This patch:
- doesn't create a section for any SHN_ABS symbols
- makes symbols that are absolute have values that are not addresses
- add accessors to SBSymbol to get the value and size of a symbol as raw integers. Prevoiusly there was no way to access a symbol's value from a SBSymbol because the only accessors were:
SBAddress SBSymbol::GetStartAddress();
SBAddress SBSymbol::GetEndAddress();
and these accessors would return an invalid SBAddress if the symbol's value wasn't an address
- Adds a test to ensure no ".absolute.<symbol-name>" sections are created
- Adds a test to test the new SBSymbol APIs
Differential Revision: https://reviews.llvm.org/D131705
Suppress coverity false positives.
This diff contains comments only, including the hints for Coverity static code inspection
to suppress the warning originating at the next line after the comment.
Differential Revision: https://reviews.llvm.org/D131998
Static code inspection guided fixes for the following issues:
- dead code
- buffer not null-terminated
- null-dereference
- out-of-bounds access
Differential Revision: https://reviews.llvm.org/D131554
Add support to Mach-O corefiles and to live gdb remote serial protocol
connections for the corefile/remote stub to provide a list of load
addresses of binaries that should be found & loaded by lldb, and nothing
else. lldb will try to parse the binary out of memory, and if it can
find a UUID, try to find a binary & its debug information based on the
UUID, falling back to using the memory image if it must.
A bit of code unification from three parts of lldb that were loading
individual binaries already, so there is a shared method in
DynamicLoader to handle all of the variations they were doing.
Re-landing this with a uuid_is_null() implementation added to
Utility/UuidCompatibility.h for non-Darwin systems.
Differential Revision: https://reviews.llvm.org/D130813
rdar://94249937
rdar://94249384
This reverts commit d8879fba8825b9799166ba0ea552d4027bfb8ad1.
Debian bot failure; I included <uuid/uuid.h> to get uuid_is_null() but
don't get it there. Will memcmp or whatever & recommit.
Add support to Mach-O corefiles and to live gdb remote serial protocol
connections for the corefile/remote stub to provide a list of load
addresses of binaries that should be found & loaded by lldb, and nothing
else. lldb will try to parse the binary out of memory, and if it can
find a UUID, try to find a binary & its debug information based on the
UUID, falling back to using the memory image if it must.
A bit of code unification from three parts of lldb that were loading
individual binaries already, so there is a shared method in
DynamicLoader to handle all of the variations they were doing.
Differential Revision: https://reviews.llvm.org/D130813
rdar://94249937
rdar://94249384
Resubmission of https://reviews.llvm.org/D130309 with the 2 patches that fixed the linux buildbot, and new windows fixes.
The FileSpec APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossible to control all of the times the FileSpec object is modified so we can clear cached member variables like m_resolved and with an upcoming patch caching if the file is relative or absolute. This patch modifies the APIs of FileSpec so no one can modify the directory or filename instance variables directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130549
This reverts commit 9429b67b8e300e638d7828bbcb95585f85c4df4d.
It broke the build on Windows, see comments on https://reviews.llvm.org/D130309
It also reverts these follow-ups:
Revert "Fix buildbot breakage after https://reviews.llvm.org/D130309."
This reverts commit f959d815f4637890ebbacca379f1c38ab47e4e14.
Revert "Fix buildbot breakage after https://reviews.llvm.org/D130309."
This reverts commit 0bbce7a4c2d2bff622bdadd4323f93f5d90e6d24.
Revert "Cache the value for absolute path in FileSpec."
This reverts commit dabe877248b85b34878e75d5510339325ee087d0.
The FileSpect APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossibly to control all of the times the FileSpec object is modified so we can clear the cache. This patch modifies the APIs of FileSpec so no one can modify the directory or filename directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130309
clang 14 removed -gz=zlib-gnu support and ld.lld/llvm-objcopy removed zlib-gnu
support recently. Remove lldb support by migrating away from
llvm::object::Decompressor::isCompressedELFSection.
The API has another user llvm-dwp, so it is not removed in this patch.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D129724
It's more natural to use uint8_t * (std::byte needs C++17 and llvm has
too much uint8_t *) and most callers use uint8_t * instead of char *.
The functions are recently moved into `llvm::compression::zlib::`, so
downstream projects need to make adaption anyway.
When an object file returns multiple architectures, it is treated
as a fat binary - which really isn't the case of i386 vs i686 where
the object file actually has one architecture.
This allows getting rid of hardcoded architecture triples in
PlatformWindows.
The parallel i386 and i686 architecture strings stem from
5e6f45201f0b62c1e7a24fc396f3ea6e10dc880d / D7120 and
ad587ae4ca143d388c0ec4ef2faa1b5eddedbf67 / D4658.
Differential Revision: https://reviews.llvm.org/D128617
As it exists today, Host::SystemLog is used exclusively for error
reporting. With the introduction of diagnostic events, we have a better
way of reporting those. Instead of printing directly to stderr, these
messages now get printed to the debugger's error stream (when using the
default event handler). Alternatively, if someone is listening for these
events, they can decide how to display them, for example in the context
of an IDE such as Xcode.
This change also means we no longer write these messages to the system
log on Darwin. As far as I know, nobody is relying on this, but I think
this is something we could add to the diagnostic event mechanism.
Differential revision: https://reviews.llvm.org/D128480
The setting `plugin.object-file.pe-coff.module-abi` is a string-to-enum
map that allows specifying an ABI to a module name. For example:
ucrtbase.dll=msvc
libstdc++-6.dll=gnu
This allows for debugging a process which mixes both modules built using
the MSVC ABI and modules built using the MinGW ABI.
Depends on D127048
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D127234
