For functions where esi is used as base pointer, we would previously fall back
from lowering memcpy with "rep movs" because that clobbers esi.
With this patch, we just store esi in another physical register, and restore
it afterwards. This adds a little bit of register preassure, but the more
efficient memcpy should be worth it.
Differential Revision: http://llvm-reviews.chandlerc.com/D2968
llvm-svn: 204174
Rather than LegalizeAction::Expand, this needs LegalizeAction::Promote to get
promoted to fp_to_sint v8f32->v8i32. This is a legal operation on AVX.
For that to work properly, we also need to teach the legalizer about the
specific promotion required here. The default vector promotion uses
bitcasting to a vector type of the same total size. We want to promote the
vector element type, effectively widening the operation and then truncating
the result. This is analogous to the current logic of how int_to_fp is
promoted.
The change also factors out some code from the int_to_fp promotion code to
ValueType::widenIntegerVectorElementType. This is now shared between
int_to_fp and fp_to_int.
There is no longer need for the custom lowering of fp_to_sint f32->v8i16 in
X86. It can now go through the new target-independent fp_to_*int promotion
logic.
I also checked that no other target uses Promote for these ops yet, so there
shouldn't be any unexpected change in behavior.
Fixes <rdar://problem/16202247>
llvm-svn: 204058
- Adds support for inserting vzerouppers before tail-calls.
This is enabled implicitly by having MachineInstr::copyImplicitOps preserve
regmask operands, which allows VZeroUpperInserter to see where tail-calls use
vector registers.
- Fixes a bug that caused the previous version of this optimization to miss some
vzeroupper insertion points in loops. (Loops-with-vector-code that followed
loops-without-vector-code were mistakenly overlooked by the previous version).
- New algorithm never revisits instructions.
Fixes <rdar://problem/16228798>
llvm-svn: 204021
These linkages were introduced some time ago, but it was never very
clear what exactly their semantics were or what they should be used
for. Some investigation found these uses:
* utf-16 strings in clang.
* non-unnamed_addr strings produced by the sanitizers.
It turns out they were just working around a more fundamental problem.
For some sections a MachO linker needs a symbol in order to split the
section into atoms, and llvm had no idea that was the case. I fixed
that in r201700 and it is now safe to use the private linkage. When
the object ends up in a section that requires symbols, llvm will use a
'l' prefix instead of a 'L' prefix and things just work.
With that, these linkages were already dead, but there was a potential
future user in the objc metadata information. I am still looking at
CGObjcMac.cpp, but at this point I am convinced that linker_private
and linker_private_weak are not what they need.
The objc uses are currently split in
* Regular symbols (no '\01' prefix). LLVM already directly provides
whatever semantics they need.
* Uses of a private name (start with "\01L" or "\01l") and private
linkage. We can drop the "\01L" and "\01l" prefixes as soon as llvm
agrees with clang on L being ok or not for a given section. I have two
patches in code review for this.
* Uses of private name and weak linkage.
The last case is the one that one could think would fit one of these
linkages. That is not the case. The semantics are
* the linker will merge these symbol by *name*.
* the linker will hide them in the final DSO.
Given that the merging is done by name, any of the private (or
internal) linkages would be a bad match. They allow llvm to rename the
symbols, and that is really not what we want. From the llvm point of
view, these objects should really be (linkonce|weak)(_odr)?.
For now, just keeping the "\01l" prefix is probably the best for these
symbols. If we one day want to have a more direct support in llvm,
IMHO what we should add is not a linkage, it is just a hidden_symbol
attribute. It would be applicable to multiple linkages. For example,
on weak it would produce the current behavior we have for objc
metadata. On internal, it would be equivalent to private (and we
should then remove private).
llvm-svn: 203866
This patch fixes the bug in peephole optimization that folds a load which defines one vreg into the one and only use of that vreg. With debug info, a DBG_VALUE that referenced the vreg considered to be a use, preventing the optimization. The fix is to ignore DBG_VALUE's during the optimization, and undef a DBG_VALUE that references a vreg that gets removed.
Patch by Trevor Smigiel!
llvm-svn: 203829
Summary:
This helps the instruction selector to lower an i64 * i64 -> i128
multiplication into a single instruction on targets which support it.
This is an update of D2973 which was reverted because of a bug reported
as PR19084.
Reviewers: t.p.northover, chapuni
Reviewed By: t.p.northover
CC: llvm-commits, alex, chapuni
Differential Revision: http://llvm-reviews.chandlerc.com/D3021
llvm-svn: 203797
Extend what's currently done for shift because the HW performs this masking
implicitly:
(rotl:i32 x, (and y, 31)) -> (rotl:i32 x, y)
I use the newly factored out multiclass that was only supporting shifts so
far.
For testing I extended my testcase for the new rotation idiom.
<rdar://problem/15295856>
llvm-svn: 203718
On ELF and COFF an alias is just another name for a position in the file.
There is no way to refer to a position in another file, so an alias to
undefined is meaningless.
MachO currently doesn't support aliases. The spec has a N_INDR, which when
implemented will have a different set of restrictions. Adding support for
it shouldn't be harder than any other IR extension.
For now, having the IR represent what is actually possible with current
tools makes it easier to fix the design of GlobalAlias.
llvm-svn: 203705
This fixes the bug where we would bitcast the 64-bit floating point result
of cmpneqsd to a 64-bit integer even on 32-bit targets.
Differential Revision: http://llvm-reviews.chandlerc.com/D3009
llvm-svn: 203581
The syntax for "cmpxchg" should now look something like:
cmpxchg i32* %addr, i32 42, i32 3 acquire monotonic
where the second ordering argument gives the required semantics in the case
that no exchange takes place. It should be no stronger than the first ordering
constraint and cannot be either "release" or "acq_rel" (since no store will
have taken place).
rdar://problem/15996804
llvm-svn: 203559
When the MOVBE instructions are available, use them for 16-bit endian
swapping as well as for 32 and 64 bit.
The patterns were already present on the instructions, but weren't being
matched because the operation was unconditionally marked to 'Expand.'
Change that to be conditional on whether the MOVBE instructions are
available. Use 'rolw' to implement the in-register version (32 and 64
bit have the dedicated 'bswap' instruction for that).
Patch by Louis Gerbarg <lgg@apple.com>.
rdar://15479984
llvm-svn: 203524
The grammar for LLVM IR is not well specified in any document but seems
to obey the following rules:
- Attributes which have parenthesized arguments are never preceded by
commas. This form of attribute is the only one which ever has
optional arguments. However, not all of these attributes support
optional arguments: 'thread_local' supports an optional argument but
'addrspace' does not. Interestingly, 'addrspace' is documented as
being a "qualifier". What constitutes a qualifier? I cannot find a
definition.
- Some attributes use a space between the keyword and the value.
Examples of this form are 'align' and 'section'. These are always
preceded by a comma.
- Otherwise, the attribute has no argument. These attributes do not
have a preceding comma.
Sometimes an attribute goes before the instruction, between the
instruction and it's type, or after it's type. 'atomicrmw' has
'volatile' between the instruction and the type while 'call' has 'tail'
preceding the instruction.
With all this in mind, it seems most consistent for 'inalloca' on an
'inalloca' instruction to occur before between the instruction and the
type. Unlike the current formulation, there would be no preceding
comma. The combination 'alloca inalloca' doesn't look particularly
appetizing, perhaps a better spelling of 'inalloca' is down the road.
llvm-svn: 203376
This is the new idiom:
x<<(y&31) | x>>((0-y)&31)
which is recognized as:
x ROTL (y&31)
The change refines matchRotateSub. In
Neg & (OpSize - 1) == (OpSize - Pos) & (OpSize - 1), if Pos is
Pos' & (OpSize - 1) we can just use Pos' instead of Pos.
llvm-svn: 203315
be split and the result type widened.
When the condition of a vselect has to be split it makes no sense widening the
vselect and thereby widening the condition. We end up in an endless loop of
widening (vselect result type) and splitting (condition mask type) doing this.
Instead, split both the condition and the vselect and widen the result.
I ran this over the test suite with i686 and mattr=+sse and saw no regressions.
Fixes PR18036.
llvm-svn: 203311
This helps the instruction selector to lower an i64 * i64 -> i128
multiplication into a single instruction on targets which support it.
Patch by Manuel Jacob.
llvm-svn: 203230
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
llvm-svn: 203204
This patch teaches the DAGCombiner how to fold a binary OR between two
shufflevector into a single shuffle vector when possible.
The rules are:
1. fold (or (shuf A, V_0, MA), (shuf B, V_0, MB)) -> (shuf A, B, Mask1)
2. fold (or (shuf A, V_0, MA), (shuf B, V_0, MB)) -> (shuf B, A, Mask2)
The DAGCombiner can take advantage of the fact that OR is commutative and
compute two possible shuffle masks (Mask1 and Mask2) for the resulting
shuffle node.
Before folding a dag according to either rule 1 or 2, DAGCombiner verifies
that the resulting shuffle mask is legal for the target.
DAGCombiner would firstly try to fold according to 1.; If not possible
then it will try to fold according to 2.
If both Mask1 and Mask2 are illegal then we conservatively don't fold
the OR instruction.
llvm-svn: 203156
Before llvm-mc would print it, but llc was assuming that it would produce
another section changing directive before one was needed. That assumption is
false with inline asm.
Fixes PR19049.
Another option would be to always create the section, but in the asm printer
avoid printing sections changes during initialization. That would work, but
* We do use the fact that llvm-mc prints it in testing. The tests can be changed
if needed.
* A quick poll on IRC suggest that most developers prefer the implicit .text to
be printed.
llvm-svn: 203001
Patchpoints already did this. Doing it for stackmaps is a convenience
for the runtime in the event that it needs to scratch register to
patch or perform a runtime call thunk.
Unlike patchpoints, we just assume the AnyRegCC calling
convention. This is the only language and target independent calling
convention specific to stackmaps so makes sense. Although the calling
convention is not currently used to select the scratch registers.
llvm-svn: 202943
selection dag (PR19012)
In X86SelectionDagInfo::EmitTargetCodeForMemcpy we check with MachineFrameInfo
to make sure that ESI isn't used as a base pointer register before we choose to
emit rep movs (which clobbers esi).
The problem is that MachineFrameInfo wouldn't know about dynamic allocas or
inline asm that clobbers the stack pointer until SelectionDAGBuilder has
encountered them.
This patch fixes the problem by checking for such things when building the
FunctionLoweringInfo.
Differential Revision: http://llvm-reviews.chandlerc.com/D2954
llvm-svn: 202930
Inside iterate, we scan backwards then scan forwards in a loop. When iteration
is not zero, the last node was just updated so we can skip it. But when
iteration is zero, we can't skip the last node.
For the testing case, fixing this will save a spill and move register copies
from hot path to cold path.
llvm-svn: 202557
Summary:
Fixes an issue where a test attempts to use -mcpu=x86-64 on non-X86-64 targets.
This triggers an assertion in the MIPS backend since it doesn't know what ABI to
use by default for unrecognized processors.
CC: llvm-commits, rafael
Differential Revision: http://llvm-reviews.chandlerc.com/D2877
llvm-svn: 202369
This handles pathological cases in which we see 2x increase in spill
code for large blocks (~50k instructions). I don't have a unit test
for this behavior.
Fixes rdar://16072279.
llvm-svn: 202304
The current approach to lower a vsetult is to flip the sign bit of the
operands, swap the operands and then use a (signed) pcmpgt. psubus (unsigned
saturating subtract) can be used to emulate a vsetult more efficiently:
+ case ISD::SETULT: {
+ // If the comparison is against a constant we can turn this into a
+ // setule. With psubus, setule does not require a swap. This is
+ // beneficial because the constant in the register is no longer
+ // destructed as the destination so it can be hoisted out of a loop.
I also enable lowering via psubus in a few other cases where it's clearly
beneficial: setule and setuge if minu/maxu cannot be used.
rdar://problem/14338765
Patch by Adam Nemet <anemet@apple.com>.
llvm-svn: 202301
Now that DataLayout is not a pass, store one in Module.
Since the C API expects to be able to get a char* to the datalayout description,
we have to keep a std::string somewhere. This patch keeps it in Module and also
uses it to represent modules without a DataLayout.
Once DataLayout is mandatory, we should probably move the string to DataLayout
itself since it won't be necessary anymore to represent the special case of a
module without a DataLayout.
llvm-svn: 202190
For targeting pecoff, ".def foo" appears before ".short 32".
.def foo;
...
.LCPI0_0:
.short 32
foo:
CHECK-LABEL seeks not from ".short 32" but from the top of the input.
llvm-svn: 201931
shifted mask rather than masking and shifting separately.
The patch adds this transformation to the DAGCombiner:
(shl (and (setcc:i8v16 ...) N01C) N1C) -> (and (setcc:i8v16 ...) N01C<<N1C)
<rdar://problem/16054492>
Patch by Adam Nemet <anemet@apple.com>
llvm-svn: 201906
r201608 made llvm corretly handle private globals with MachO. r201622 fixed
a bug in it and r201624 and r201625 were changes for using private linkage,
assuming that llvm would do the right thing.
They all got reverted because r201608 introduced a crash in LTO. This patch
includes a fix for that. The issue was that TargetLoweringObjectFile now has
to be initialized before we can mangle names of private globals. This is
trivially true during the normal codegen pipeline (the asm printer does it),
but LTO has to do it manually.
llvm-svn: 201700
