and fix crash when vd_aux is invalid (#86611).
vd_version, vd_flags, vd_ndx, and vd_cnt in Elf{32,64}_Verdef are
16-bit. Change VerDef to use uint16_t instead.
vda_name specifies a NUL-terminated string. Update getVersionDefinitions
to remove some `.c_str()`.
Pull Request: https://github.com/llvm/llvm-project/pull/128434
The dynamic string table used by the dynamic section is referenced by
the sh_link field of that section, so we should use that directly,
rather than going via the dynamic symbol table.
More info:
https://github.com/llvm/llvm-project/pull/125679#discussion_r1961333454
Signed-off-by: Ruoyu Qiu <cabbaken@outlook.com>
Extract the llvm-readelf decoder to `decodeCrel` (#91280) and reuse it
for llvm-objdump.
Because the section representation of LLVMObject (`SectionRef`) is
64-bit, insufficient to hold all decoder states, `section_rel_begin` is
modified to decode CREL eagerly and hold the decoded relocations inside
ELFObjectFile<ELFT>.
The test is adapted from llvm/test/tools/llvm-readobj/ELF/crel.test.
Pull Request: https://github.com/llvm/llvm-project/pull/97382
When reading the dynamic string table, llvm-objdump used to crash if the
ELF was malformed, due to an erroneous consumption of error status.
Instead, propogate the error status to the caller, fixing the crash, and
printing a warning.
llvm-readobj and llvm-objdump have inconsistent handling of display
lma for sections.
This patch tries to common code up and adapt the same approach for
both tools.
Mach-O can just use the global variable `FirstPrivateHeader`.
If we ever manage to remove global variables, we can add a Config
variable to Dumper. Either case, the parameter is not needed.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D156291
We pay the one-off boilerplate overhead to create `*Dumper` classes that derive
from objdump::Dumper a la llvm-readobj. This has two primary advantages.
First, a lot object file format specific code can be moved from
llvm-objdump.cpp to *Dump.cpp files. Refactor `printPrivateHeaders` as
an example.
Second, with the introduction of ELFDumper<ELFT>, we can simplify
a few dispatch functions in ELFDump.cpp.
In addition, the ObjectFile specific dumpers contains a ObjectFile specific
reference so that we can remove a lot of `cast<*ObjectFile>(Obj)`.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D155045
As suggested by @erichkeane in
https://reviews.llvm.org/D141451#inline-1429549
There's potential for a lot more cleanups around these APIs. This is
just a start.
Callers need to be more careful about sub-expressions producing strings
that don't outlast the expression using `llvm::demangle`. Add a
release note.
Differential Revision: https://reviews.llvm.org/D149104
This reverts commit c117c2c8ba4afd45a006043ec6dd858652b2ffcc.
itaniumDemangle calls std::strlen with the results of
std::string_view::data() which may not be NUL-terminated. This causes
lld/test/wasm/why-extract.s to fail when "expensive checks" are enabled
via -DLLVM_ENABLE_EXPENSIVE_CHECKS=ON. See D149675 for further
discussion. Back this out until the individual demanglers are converted
to use std::string_view.
As suggested by @erichkeane in
https://reviews.llvm.org/D141451#inline-1429549
There's potential for a lot more cleanups around these APIs. This is
just a start.
Callers need to be more careful about sub-expressions producing strings
that don't outlast the expression using ``llvm::demangle``. Add a
release note.
Reviewed By: MaskRay, #lld-macho
Differential Revision: https://reviews.llvm.org/D149104
When .gnu.version_r is empty (allowed by readelf but warned by objdump),
llvm-objdump -p may decode the next section as .gnu.version_r and may crash due
to out-of-bounds C string reference. ELFFile<ELFT>::getVersionDependencies
handles 0-entry .gnu.version_r gracefully. Just use it.
Fix https://github.com/llvm/llvm-project/issues/57707
Differential Revision: https://reviews.llvm.org/D133751
Fix#54456: `objcopy --only-keep-debug` produces a linked image with invalid
empty dynamic section. llvm-objdump -p currently reports an error which seems
excessive.
```
% llvm-readelf -l a.out
llvm-readelf: warning: 'a.out': no valid dynamic table was found
...
```
Follow the spirit of llvm-readelf -l (D64472) and report a warning instead.
This allows later files to be dumped despite warnings for an input file, and
improves objdump compatibility in that the exit code is now 0 instead of 1.
```
% llvm-objdump -p a.out # new behavior
...
Program Header:
llvm-objdump: warning: 'a.out': invalid empty dynamic section
% objdump -p a.out
...
Dynamic Section:
```
Reviewed By: jhenderson, raj.khem
Differential Revision: https://reviews.llvm.org/D122505
As described on D111049, we're trying to remove the <string> dependency from error handling and replace uses of report_fatal_error(const std::string&) with the Twine() variant which can be forward declared.
When dumping multiple pieces of information (e.g. --all-headers),
there is sometimes no separator between two pieces.
This patch uses the "\nheader:\n" style, which generally improves
compatibility with GNU objdump.
Note: objdump -t/-T does not add a newline before "SYMBOL TABLE:" and "DYNAMIC SYMBOL TABLE:".
We add a newline to be consistent with other information.
`objdump -d` prints two empty lines before the first 'Disassembly of section'.
We print just one with this patch.
Differential Revision: https://reviews.llvm.org/D101796
Previously printing R_386_RELATIVE relocations would trigger
`error: can't read an entry at 0x40: it goes past the end of the section (0x40)`
I found this while writing a test case for LLD (D100490).
This also includes some minor cleanup in the elf-dynamic-relcos.test
llvm-objdump test based on the newly added test.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D100489
This was requested in comments for D93209:
https://reviews.llvm.org/D93209#inline-871192
D93209 fixes an issue with `ELFFile<ELFT>::getEntry`,
after what `getSymbol` starts calling `report_fatal_error` for previously
missed invalid cases.
This patch makes it return `Expected<>` and updates callers.
For few of them I had to add new `report_fatal_error` calls. But I see no
way to avoid it currently. The change would affects too many places, e.g:
`getSymbolBinding` and other methods are used from `ELFSymbolRef`
which is used in too many places across LLVM.
Differential revision: https://reviews.llvm.org/D93297
`ELFFile<ELFT>` has many methods that take pointers,
though they assume that arguments are never null and
hence could take references instead.
This patch performs such clean-up.
Differential revision: https://reviews.llvm.org/D87385
llvm-objdump currently calls report_fatal_error() when the e_phoff field is invalid.
This is tested by elf-invalid-phdr.test which has the following issues:
1) It uses a precompiled object.
2) it could be a part of invalid.test.
3) It tests the Object lib, but we have no separate test for llvm-objdump.
This patch addresses issues mentioned.
Differential revision: https://reviews.llvm.org/D83559
Summary:
Continuing from D77285, the external interfaces implemented by
`ELFDump.cpp` are now declared in `ELFDump.h` and moved into the
`llvm::objdump` namespace. Externs defined in `ELFDump.cpp` that are
unreferenced externally are also made static.
Reviewers: jhenderson, MaskRay, DiggerLin, jasonliu, daltenty
Reviewed By: jhenderson, MaskRay
Subscribers: RKSimon, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78695
Summary:
This patch moves the forward declarations of command-line `cl::*`
externs in `MachODump.cpp` and `llvm-objdump.cpp` into the headers
corresponding to the file that defines the variable. At the same time,
these externs are moved into the `llvm::objdump` namespace. The externs
that are not referenced outside their defining translation unit are made
static.
This does not factor out uses of the Mach-O options from
`llvm-objdump.cpp`.
Reviewers: jhenderson, MaskRay, DiggerLin, jasonliu, daltenty
Reviewed By: jhenderson, MaskRay
Subscribers: rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77388
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
We have a bug currently: printed tag names might overlap the
value column. It happens for MIPS now.
This patch adds a logic to calculate the size of indentation on fly
to fix such issues.
Differential revision: https://reviews.llvm.org/D72838
The PT_GNU_PROPERTY is generated by a linker to describe the
.note.gnu.property section. The Linux kernel uses this program header to
locate the .note.gnu.property section.
It is described in "The Linux gABI extension"
Include support for llvm-readelf, llvm-readobj and the yaml reader and
writers.
Differential Revision: https://reviews.llvm.org/D70959
Summary: Matches GNU objdump. Makes debugging easier for me as I'm working out addresses from symbol+addend, so it would be good to be calculating in a single format.
Reviewers: MaskRay, grimar, jhenderson, bd1976llvm
Reviewed By: jhenderson
Subscribers: sdardis, jrtc27, atanasyan, rupprecht, seiya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69997
The error reporting function are not consistent.
Before this change:
* They had inconsistent naming (e.g. 'error' vs 'report_error').
* Some of them reported the object name, others - dont.
* Some of them accepted the case when there was no error. (i.e. error code or Error had a success value).
This patch tries to cleanup it a bit.
It also renames report_error -> reportError, report_warning -> reportWarning
and removes a full stop from messages.
Differential revision: https://reviews.llvm.org/D66418
llvm-svn: 369515
Summary:
Before:
```
Dynamic Section:
NEEDED libpthread.so.0
...
NEEDED ld-linux-x86-64.so.2
RPATH 0x00000000001c2e61
```
After:
```
Dynamic Section:
NEEDED libpthread.so.0
...
NEEDED ld-linux-x86-64.so.2
RPATH $ORIGIN/../lib
```
Only a small problem here, I have no idea on choosing test case. I see there's a test
file(test/tools/llvm-objdump/private-headers-dynamic-section.test). But it has no DT_RPATH and DT_RUNPATH tags. Shall I replace the ELF file in the
Inputs dir by a new one?
Reviewers: jhenderson, grimar
Reviewed By: jhenderson
Subscribers: srhines, rupprecht, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58707
llvm-svn: 355001
When --section-headers is used, GNU objdump prints both LMA and VMA for sections.
llvm-objdump does not do that what makes it's output be slightly inconsistent.
Patch teaches llvm-objdump to print LMA/VMA for ELF file formats.
The behavior for other formats remains unchanged.
Differential revision: https://reviews.llvm.org/D57146
llvm-svn: 352366
