The `target.max-children-depth` setting and `--depth` flag would be
ignored if treating pointer as arrays, fix that by always incrementing
the current depth when printing a new child.
rdar://109855463
Differential Revision: https://reviews.llvm.org/D151950
This patch skips both `test_completion_target_create_from_root_dir`
introduced in `e896612` and `target-label.test` introduced in `1e82b20`
since I don't have a windows machine to try to accomodate the filesystem
path style differences for these tests to pass.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch should fix path completion starting from the root directory.
To do so, this patch adds a special case when setting the search
directory when the completion buffer points to the root directory.
Differential Revision: https://reviews.llvm.org/D152013
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch should allow the user to set specific auto-completion type
for their custom commands.
To do so, we had to hoist the `CompletionType` enum so the user can
access it and add a new completion type flag to the CommandScriptAdd
Command Object.
So now, the user can specify which completion type will be used with
their custom command, when they register it.
This also makes the `crashlog` custom commands use disk-file completion
type, to browse through the user file system and load the report.
Differential Revision: https://reviews.llvm.org/D152011
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
I fixed some long-standing failures in SBTarget::FindGlobalVariables
but the fix is in the the accelerator table lookups. I fixed it in
the DWARF mappable tables but not everyone uses those, so I had to
restrict the test to systems I know did.
There were two bugs here.
eMatchTypeStartsWith searched for "symbol_name" by adding ".*" to the
end of the symbol name and treating that as a regex, which isn't
actually a regex for "starts with". The ".*" is in fact a no-op. When
we finally get to comparing the name, we compare against whatever form
of the name was in the accelerator table. But for C++ that might be
the mangled name. We should also try demangled names here, since most
users are going the see demangled not mangled names. I fixed these
two bugs and added a bunch of tests for FindGlobalVariables.
This change is in the DWARF parser code, so there may be a similar bug
in PDB, but the test for this was already skipped for Windows, so I
don't know about this.
You might theoretically need to do this Mangled comparison in
DWARFMappedHash::MemoryTable::FindByName
except when we have names we always chop them before looking them up
so I couldn't see any code paths that fail without that change. So I
didn't add that to this patch.
Differential Revision: https://reviews.llvm.org/D151940
Show line numbers to the left of diagnostic code snippets and increase
the numbers of lines shown from 1 to 16.
Differential Revision: https://reviews.llvm.org/D147875
This was just a thinko. The API StackFrame::GetVariableList takes a
bool for "get_file_globals" which if true will also find file statics
and file globals. But we only were passing that as true if the
ValueType was eValueTypeVariableGlobal, which meant that we never find
file statics. It's okay if we cast too wide a net when we do
GetVariableList as later on we check against the ValueType to filter
globals from statics.
There was a test that had a whole bunch of globals and tested
FindValue on all of them, but had no statics. So I just made one of
the globals a file static, which verifies the fix.
Differential Revision: https://reviews.llvm.org/D151392
Expression evaluation for `void` valued expressions sets an error using the `kNoResult`
code. Like the `expression` command, `dwim-print` should also not print such errors.
Before:
```
(lldb) dwim-print (void)printf("hi\n")
hi
Error: 'unknown error'
```
After:
```
(lldb) dwim-print (void)printf("hi\n")
hi
```
rdar://109746544
Differential Revision: https://reviews.llvm.org/D151351
When printing the root of a value, if it's a reference its children are unconditionally
printed - in contrast to pointers whose children are only printed if a sufficient
pointer depth is given.
However, the children are printed even when there's a summary provider that says not to.
If a summary provider exists, this change consults it to determine if children should be
printed.
For example, given a variable of type `std::string &`, this change has the following
effect:
Before:
```
(lldb) p string_ref
(std::string &) string_ref = "one two three four five six seven eight nine ten": {
__r_ = {
std::__1::__compressed_pair_elem<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >::__rep, 0, false> = {
__value_ = {
= {
__l = (__data_ = "one two three four five six seven eight nine ten", __size_ = 48, __cap_ = 64, __is_long_ = 1)
__s = (__data_ = "@\0p\U00000001\0`\0\00\0\0\0\0\0\0\0@", __padding_ = "\x80t<", __size_ = '\0', __is_long_ = '\x01')
__r = {
__words ={...}
}
}
}
}
}
}
```
After:
```
(lldb) p string_ref
(std::string &) string_ref = "one two three four five six seven eight nine ten"
```
rdar://73248786
Differential Revision: https://reviews.llvm.org/D151748
Since 44bb442 LLDB TestVarPath.py crashes on AArch64 Windows.
GetValueForVariablePath function seems to be triggering the crash.
This patch disable parts of this test causing the crash.
Bug reported upstream:
https://github.com/llvm/llvm-project/issues/62983
Following tests are now passing on LLDB AArch64 Windows buildbot:
lldb-api :: commands/expression/deleting-implicit-copy-constructor/TestDeletingImplicitCopyConstructor.py
lldb-api :: functionalities/data-formatter/data-formatter-categories/TestDataFormatterCategories.py
lldb-api :: lang/cpp/constructors/TestCppConstructors.py
lldb-api :: lang/cpp/namespace/TestNamespace.py
lldb-api :: lang/cpp/this_class_type_mixing/TestThisClassTypeMixing.py
https://lab.llvm.org/buildbot/#/builders/219/builds/3012
This patch removes XFAIL decorator from all of the above.
Differential Revision: https://reviews.llvm.org/D151268
The x86_64 macOS CI bot is failing because this test
times out. It was marked as expectedFail earlier today,
but that's not considered a fail so the CI runs are
red. Skipping it on Darwin for now until Ismail can
look into it.
This reverts commit 429e74839506ea8ba962d24647264ed81f680bbf since it
didn't address the test failures on GreenDragon.
This patch will mark the tests as expected to fail until I can reproduce
the issue and find a solution.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This is an ongoing series of commits that are reformatting our Python
code. Reformatting is done with `black` (23.1.0).
If you end up having problems merging this commit because you have made
changes to a python file, the best way to handle that is to run `git
checkout --ours <yourfile>` and then reformat it with black.
RFC: https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Differential revision: https://reviews.llvm.org/D151460
This mimicks the implementation of the libstdcpp std::unique_ptr
formatter.
This has been attempted several years ago in
`0789722d85cf1f1fdbe2ffb2245ea0ba034a9f94` but was reverted in
`e7dd3972094c2f2fb42dc9d4d5344e54a431e2ce`.
The difference to the original patch is that we now maintain
a `$$dereference$$` member and we only store weak pointers
to the other children inside the synthetic frontend. This is
what the libc++ formatters do to prevent the recursion mentioned
in the revert commit.
This reverts commit 273a2d337f675f3ee050f281b1fecc3e806b9a3c, since it
might be the cause for `TestStackCoreScriptedProcess` and
`TestInteractiveScriptedProcess` failures on GreenDragon:
https://green.lab.llvm.org/green/job/lldb-cmake/55460/`
This patch moves the `PassthroughScriptedProcess` & `PassthroughScriptedThread`
classes from the `interactive_scripted_process.py` test implementation
to the `lldb.scripted_process` python module.
This class is very versatile so it makes more sense to ship it with the
python module to make it easier for our adopters to derive their class
from it instead of copying it.
During the "migration", I've also noticed some bugs in the
`PassthroughScriptedThread` creation and update, so I also fixed that as
part of this patch.
Differential Revision: https://reviews.llvm.org/D151044
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch adds support to eStopReasonTrace to Scripted Threads.
This is necessary when using a Scrited Process with a Scripted Thread
Plan to report a special thread stop reason to the thread plan.
rdar://109425542
Differential Revision: https://reviews.llvm.org/D151043
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch refactors the `StructuredData::Integer` class to make it
templated, makes it private and adds 2 public specialization for both
`int64_t` & `uint64_t` with a public type aliases, respectively
`SignedInteger` & `UnsignedInteger`.
It adds new getter for signed and unsigned interger values to the
`StructuredData::Object` base class and changes the implementation of
`StructuredData::Array::GetItemAtIndexAsInteger` and
`StructuredData::Dictionary::GetValueForKeyAsInteger` to support signed
and unsigned integers.
This patch also adds 2 new `Get{Signed,Unsigned}IntegerValue` to the
`SBStructuredData` class and marks `GetIntegerValue` as deprecated.
Finally, this patch audits all the caller of `StructuredData::Integer`
or `StructuredData::GetIntegerValue` to use the proper type as well the
various tests that uses `SBStructuredData.GetIntegerValue`.
rdar://105575764
Differential Revision: https://reviews.llvm.org/D150485
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
TestInterruptBacktrace.py started randonmly failing on Arm/Linux
buildbot since e19387e6936c. This patch marks it skipped.
Differential Revision: https://reviews.llvm.org/D150236
**Summary**
When filling out the LayoutInfo for a structure with the offsets
from DWARF, LLDB fills gaps in the layout by creating unnamed
bitfields and adding them to the AST. If we don't do this correctly
and our layout has overlapping fields, we will hat an assertion
in `clang::CGRecordLowering::lower()`. Specifically, if we have
a derived class with a VTable and a bitfield immediately following
the vtable pointer, we create a layout with overlapping fields.
This is an oversight in some of the previous cleanups done around this
area.
In `D76808`, we prevented LLDB from creating unnamed bitfields if there
was a gap between the last field of a base class and the start of a bitfield
in the derived class.
In `D112697`, we started accounting for the vtable pointer. The intention
there was to make sure the offset bookkeeping accounted for the
existence of a vtable pointer (but we didn't actually want to create
any AST nodes for it). Now that `last_field_info.bit_size` was being
set even for artifical fields, the previous fix `D76808` broke
specifically for cases where the bitfield was the first member of a
derived class with a vtable (this scenario wasn't tested so we didn't
notice it). I.e., we started creating redundant unnamed bitfields for
where the vtable pointer usually sits. This confused the lowering logic
in clang.
This patch adds a condition to `ShouldCreateUnnamedBitfield` which
checks whether the first field in the derived class is a vtable ptr.
**Testing**
* Added API test case
Differential Revision: https://reviews.llvm.org/D150591
Since 44363f2 various tests have started passing but introduced a
expression evaluation failure in TestDataFormatterSynthVal.py.
This patch marks the expression evaluation part as skipped while rest
of the test passes.
This patch aslo introduces a new helper isAArch64Windows in lldbtest.py.
This patch fixes libstdc++ data formatter for reference/pointer to std::string.
The failure testcases are added which succeed with the patch.
Differential Revision: https://reviews.llvm.org/D150313
wrong answer. Plus, it's useful in some places to have a way to force
the full stack to be created even in the face of
interruption. Moreover, most of the time when you're just getting
frames, you don't need to know the number of frames in the stack to
start with. You just keep calling
Thread::GetStackFrameAtIndex(index++) and when you get a null
StackFrameSP back, you're done. That's also more amenable to
interruption if you are doing some work frame by frame.
So this patch makes GetStackFrameCount always return the full count,
suspending interruption. I also went through all the places that use
GetStackFrameCount to make sure that they really needed the full stack
walk. In many cases, they did not. For instance frame select -r 10 was
getting the number of frames just to check whether cur_frame_idx + 10
was within the stack. It's better in that case to see if that frame
exists first, since that doesn't force a full stack walk, and only
deal with walking off the end of the stack if it doesn't...
I also added a test for some of these behaviors.
Differential Revision: https://reviews.llvm.org/D150236
According to the spec, RestartRequest has an optional "arguments" field, which
is a RestartArguments object. RestartArguments has its own optional "arguments"
field, which is a (LaunchRequestArguments | AttachRequestArguments) object. So
we need to to the "arguments" lookup twice to get to the actual launch
arguments.
Differential Revision: https://reviews.llvm.org/D150392
Fix a mutation of `CommandAlias::m_option_args_sp`, which resulted in cases where
aliases would fail to run on second, and subsequent times.
For example, an alias such as:
```
command alias p1 p 1
```
When run the second time, the following error would be reported to the user:
```
error: expression failed to parse:
error: <user expression 1>:1:1: expression is not assignable
-- 1
^ ~
```
To fix this, `CommandAlias::Desugar` now constructs options to a freshly constructed
vector, rather than by appending to the results of `GetOptionArguments`.
rdar://107770836
Differential Revision: https://reviews.llvm.org/D150078
The architecture doesn't really matter for the test, at least not until
the dynamic loader can load these fat64 binaries. Use Hawell instead of
arm64 to support older bots that don't know about Apple Silicon triples.
Add suport for MASK style watchpoints on AArch64 in debugserver
on Darwin systems, for watching power-of-2 sized memory ranges.
More work needed in lldb before this can be exposed to the user
(because they will often try watching memory ranges that are not
exactly power-of-2 in size/alignment) but this is the first part
of adding that capability.
Differential Revision: https://reviews.llvm.org/D149792
rdar://108233371
This patch add or removes XFAIL decorator from various tests which were marked
xfail for windows.
since 44363f2 various tests have started passing but introduced a couple of new failures.
Weight is in favor of new XPasses and I have removed XFail decorator from them. Also
some new tests have started failing for which we need to file separate bugs. I have
marked them xfail for now and will add the bug id after investigating the issue.
Differential Revision: https://reviews.llvm.org/D149235
This is an optional request, but supporting it makes the experience
better when re-launching a big binary that takes significant time to
parse: instead of tearing down and re-create the whole session we just
need to kill the current process and launch a new one.
Some non-obvious comments that might help review this change:
* After killing the process, we get an "exited" event for it. Because
the process no longer exists some interesting things can occur that
manifest as flaky failures if not dealt with:
- `EventIsProcessEvent` relies on `SBEvent::GetBroadcasterClass`,
which can crash if the broadcaster is no longer there: the event
only holds a weak_ptr to its broadcaster, and `GetBroadcasterClass`
uses it without checking.
Other `EventIs*` functions look at the flavor of the EventData, so I
have modified EventIsProcessEvent to do that.
- We keep the PID of the old process so we can detect its "exited"
event and not terminate the whole session. But sometimes the
SBProcess we get from the event won't have a PID, for some reason.
* I have factored out the code to launch a process out to a new
LaunchProcess function, so it can be used from both `request_launch`
and `request_restart`.
* The restart_runInTerminal test has the same problem with debug builds
as the original runInTerminal test: when attaching to the launcher
instance of lldb-vscode it takes a long time to parse its debug info.
I have used the same workaround to disable that particular test for
debug builds.
Differential Revision: https://reviews.llvm.org/D147831
Expression evaluation allocates memory for storing intermediate data during evaluation. For it to work properly it has to be allocated within target's available address space, for example within first 0xFFFF bytes for the 16-bit MSP430. The memory for such targets can be very tightly packed, but not all targets support GetMemoryRegionInfo API to pick an unused region, like MSP430 with MSPDebug GDB server.
These settings allow the programmer to manually pick precisely where and how much memory to allocate for expression evaluation in order not to overlap with existing data in process memory.
Reviewed By: bulbazord
Differential Revision: https://reviews.llvm.org/D149262
We just want to test whether the language switch works.
This is easier to control for libc++, since for bots building
the tests against libstdc++ we might not have the necessary
`<compare>` header available currently.
llvm has a structure for maps where the key's type is a string. Using
that also means that the keys for OptionValueDictionary don't stick
around forever in ConstString's StringPool (even after they are gone).
The only thing we lose here is ordering: iterating over the map where the keys
are ConstStrings guarantees that we iterate in alphabetical order.
StringMap makes no guarantees about the ordering when you iterate over
the entire map.
Differential Revision: https://reviews.llvm.org/D149482
The unique_ptr prettyprinter calls `GetValueOfLibCXXCompressedPair`,
which looks for a `__value_` child. However, when the second value in
the compressed pair is not an empty class, there are two `__value_`
children because `__compressed_pair` derives twice from
`__compressed_pair_elem`, one for each member of the pair. And then the
lookup fails because it's ambiguous.
This patch makes the following changes:
- Rename `GetValueOfLibCXXCompressedPair` to
`GetFirstValueOfLibCXXCompressedPair`, and add a similar function to
get the second value. Put both functions in
Plugin/Language/CPlusPlus/LibCxx.cpp because it seems inappropriate to
have libcxx-specific helpers separate from all the libcxx-dependent
code.
- Read the second value of the `__ptr_` pair and display a "deleter"
child in the unique_ptr synthetic child provider, when available.
- Add a test case for the non-empty deleter case.
Differential Revision: https://reviews.llvm.org/D148662
Refactor the debugserver watchpiont support in anticipating of
adding support for AArch64 MASK hardware watchpoints to watch
larger regions of memory. debugserver already had support for
handling a request to watch an unaligned region of memory up
to 8 bytes using Byte Address Select watchpoints - it would split
an unaligned watch request into two aligned doublewords that
could be watched with two hardware watchpoints using the BAS
specification.
This patch generalizes that code for properly aligning, and
possibly splitting, a watchpoint request into two hardware watchpoints
to handle any size request. And separates out the specifics
about BAS watchpoints into its own method, so a sibling method
for MASK watchpoints can be dropped in next.
Differential Revision: https://reviews.llvm.org/D149040
rdar://108233371
