This includes .seh_* directives for generating it from assembly.
It is designed fairly similarly to the ARM64 handling.
For .seh_handler directives, such as
".seh_handler __C_specific_handler, @except" (which is supported
on x86_64 and aarch64 so far), the "@except" bit doesn't work in
ARM assembly, as '@' is used as a comment character (on all current
platforms).
Allow using '%' instead of '@' for this purpose. This convention
is used by GAS in similar contexts already,
e.g. [1]:
Note on targets where the @ character is the start of a comment
(eg ARM) then another character is used instead. For example the
ARM port uses the % character.
In practice, this unfortunately means that all such .seh_handler
directives will need ifdefs for ARM.
Contrary to ARM64, on ARM, it's quite common that we can't evaluate
e.g. the function length at this point, due to instructions whose
length is finalized later. (Also, inline jump tables end with
a ".p2align 1".)
If unable to to evaluate the function length immediately, emit
it as an MCExpr instead. If we'd implement splitting the unwind
info for a function (which isn't implemented for ARM64 yet either),
we wouldn't know whether we need to split it though.
Avoid calling getFrameIndexOffset() on an unset
FuncInfo.UnwindHelpFrameIdx, to avoid triggering asserts in the
preexisting testcase CodeGen/ARM/Windows/wineh-basic.ll. (Once
MSVC exception handling is fully implemented, those changes
can be reverted.)
[1] https://sourceware.org/binutils/docs/as/Section.html#Section
Differential Revision: https://reviews.llvm.org/D125645
This reverts commit 256a52d9aac8a9e98fbfd6a3d91090bf127cef7d (and
also the follow-up commit 38eb4fe74b3843ab0d7fc1e that moved a test
case to a different directory).
As discussed in https://reviews.llvm.org/D126257 there is a suspicion
that something was wrong with this commit as text section range was
shortened to 1 byte rather than rounded up as shown in the
llvm/test/DebugInfo/X86/dwarf-aranges.ll test case.
This commit modifies the AsmPrinter to avoid emitting any zero-sized symbols to
the .debug_aranges table, by rounding their size up to 1. Entries with zero
length violate the DWARF 5 spec, which states:
> Each descriptor is a triple consisting of a segment selector, the beginning
> address within that segment of a range of text or data covered by some entry
> owned by the corresponding compilation unit, followed by the non-zero length
> of that range.
In practice, these zero-sized entries produce annoying warnings in lld and
cause GNU binutils to truncate the table when parsing it.
Other parts of LLVM, such as DWARFDebugARanges in the DebugInfo module
(specifically the appendRange method), already avoid emitting zero-sized
symbols to .debug_aranges, but not comprehensively in the AsmPrinter. In fact,
the AsmPrinter does try to avoid emitting such zero-sized symbols when labels
aren't involved, but doesn't when the symbol to emitted is a difference of two
labels; this patch extends that logic to handle the case in which the symbol is
defined via labels.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D126257
Most clients only used these methods because they wanted to be able to
extend or truncate to the same bit width (which is a no-op). Now that
the standard zext, sext and trunc allow this, there is no reason to use
the OrSelf versions.
The OrSelf versions additionally have the strange behaviour of allowing
extending to a *smaller* width, or truncating to a *larger* width, which
are also treated as no-ops. A small amount of client code relied on this
(ConstantRange::castOp and MicrosoftCXXNameMangler::mangleNumber) and
needed rewriting.
Differential Revision: https://reviews.llvm.org/D125557
An upcoming patch will extend llvm-symbolizer to provide the source line
information for global variables. The goal is to move AddressSanitizer
off of internal debug info for symbolization onto the DWARF standard
(and doing a clean-up in the process). Currently, ASan reports the line
information for constant strings if a memory safety bug happens around
them. We want to keep this behaviour, so we need to emit debuginfo for
these variables as well.
Reviewed By: dblaikie, rnk, aprantl
Differential Revision: https://reviews.llvm.org/D123534
This reverts commit 4680982b36a84770a1600fc438be8ec090671724.
Broke a fuchsia windows bot. More details in the review:
https://reviews.llvm.org/D123534
An upcoming patch will extend llvm-symbolizer to provide the source line
information for global variables. The goal is to move AddressSanitizer
off of internal debug info for symbolization onto the DWARF standard
(and doing a clean-up in the process). Currently, ASan reports the line
information for constant strings if a memory safety bug happens around
them. We want to keep this behaviour, so we need to emit debuginfo for
these variables as well.
Reviewed By: dblaikie, rnk, aprantl
Differential Revision: https://reviews.llvm.org/D123534
Summary:
When -ffunction-sections is on, this patch makes the compiler to generate unique LSDA and EH info sections for functions on AIX by appending the function name to the section name as a suffix. This will allow the AIX linker to garbage-collect unused function.
Reviewed by: MaskRay, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D124855
Running iwyu-diff on LLVM codebase since fa5a4e1b95c8f37796 detected a few
regressions, fixing them.
Differential Revision: https://reviews.llvm.org/D124847
Revert "[docs] Fix underline"
Breaks a lot of asan tests in google.
This reverts commit 365c3e85bced1fb56c2d94adc34bff7a94abe4a6.
This reverts commit 78a784bea443cdcecf894155ab37893d7a8e8332.
This emits an `st_size` that represents the actual useable size of an object before the redzone is added.
Reviewed By: vitalybuka, MaskRay, hctim
Differential Revision: https://reviews.llvm.org/D123010
Current stack size diagnostics ignore the size of the unsafe stack.
This patch attaches the size of the static portion of the unsafe stack
to the function as metadata, which can be used by the backend to emit
diagnostics regarding stack usage.
Reviewed By: phosek, mcgrathr
Differential Revision: https://reviews.llvm.org/D119996
This is x86 specific, and adds statefulness to
MachineModuleInfo. Instead of explicitly tracking this, infer if we
need to declare the symbol based on the reference previously inserted.
This produces a small change in the output due to the move from
AsmPrinter::doFinalization to X86's emitEndOfAsmFile. This will now be
moved relative to other end of file fields, which I'm assuming doesn't
matter (e.g. the __morestack_addr declaration is now after the
.note.GNU-split-stack part)
This also produces another small change in code if the module happened
to define/declare __morestack_addr, but I assume that's invalid and
doesn't really matter.
This is used to emit one field in doFinalization for the module. We
can accumulate this when emitting all individual functions directly in
the AsmPrinter, rather than accumulating additional state in
MachineModuleInfo.
Move the special case behavior predicate into MachineFrameInfo to
share it. This now promotes it to generic behavior. I'm assuming this
is fine because no other target implements adjustForSegmentedStacks,
or has tests using the split-stack attribute.
This can be set up front, and used only as a cache. This avoids a
field that looks like it requires MIR serialization.
I believe this fixes 2 bugs for CodeView. First, this addresses a
FIXME that the flag -diable-debug-info-print only works with
DWARF. Second, it fixes emitting debug info with emissionKind NoDebug.
specifying DW_AT_trampoline as a string. Also update the signature
of DIBuilder::createFunction to reflect this addition.
Differential Revision: https://reviews.llvm.org/D123697
Certain applications crashed for us with the AMDGPU backend. While this
is not a proper fix it allows us to compile the code for now. I left a
TODO for someone that understands DWARF.
Differential Revision: https://reviews.llvm.org/D123717
This pass inserts the necessary CFI instructions to compensate for the
inconsistency of the call-frame information caused by linear (non-CGA
aware) nature of the unwind tables.
Unlike the `CFIInstrInserer` pass, this one almost always emits only
`.cfi_remember_state`/`.cfi_restore_state`, which results in smaller
unwind tables and also transparently handles custom unwind info
extensions like CFA offset adjustement and save locations of SVE
registers.
This pass takes advantage of the constraints taht LLVM imposes on the
placement of save/restore points (cf. `ShrinkWrap.cpp`):
* there is a single basic block, containing the function prologue
* possibly multiple epilogue blocks, where each epilogue block is
complete and self-contained, i.e. CSR restore instructions (and the
corresponding CFI instructions are not split across two or more
blocks.
* prologue and epilogue blocks are outside of any loops
Thus, during execution, at the beginning and at the end of each basic
block the function can be in one of two states:
- "has a call frame", if the function has executed the prologue, or
has not executed any epilogue
- "does not have a call frame", if the function has not executed the
prologue, or has executed an epilogue
These properties can be computed for each basic block by a single RPO
traversal.
From the point of view of the unwind tables, the "has/does not have
call frame" state at beginning of each block is determined by the
state at the end of the previous block, in layout order.
Where these states differ, we insert compensating CFI instructions,
which come in two flavours:
- CFI instructions, which reset the unwind table state to the
initial one. This is done by a target specific hook and is
expected to be trivial to implement, for example it could be:
```
.cfi_def_cfa <sp>, 0
.cfi_same_value <rN>
.cfi_same_value <rN-1>
...
```
where `<rN>` are the callee-saved registers.
- CFI instructions, which reset the unwind table state to the one
created by the function prologue. These are the sequence:
```
.cfi_restore_state
.cfi_remember_state
```
In this case we also insert a `.cfi_remember_state` after the
last CFI instruction in the function prologue.
Reviewed By: MaskRay, danielkiss, chill
Differential Revision: https://reviews.llvm.org/D114545
Returning `std::array<uint8_t, N>` is better ergonomics for the hashing functions usage, instead of a `StringRef`:
* When returning `StringRef`, client code is "jumping through hoops" to do string manipulations instead of dealing with fixed array of bytes directly, which is more natural
* Returning `std::array<uint8_t, N>` avoids the need for the hasher classes to keep a field just for the purpose of wrapping it and returning it as a `StringRef`
As part of this patch also:
* Introduce `TruncatedBLAKE3` which is useful for using BLAKE3 as the hasher type for `HashBuilder` with non-default hash sizes.
* Make `MD5Result` inherit from `std::array<uint8_t, 16>` which improves & simplifies its API.
Differential Revision: https://reviews.llvm.org/D123100
This pass inserts the necessary CFI instructions to compensate for the
inconsistency of the call-frame information caused by linear (non-CFG
aware) nature of the unwind tables.
Unlike the `CFIInstrInserer` pass, this one almost always emits only
`.cfi_remember_state`/`.cfi_restore_state`, which results in smaller
unwind tables and also transparently handles custom unwind info
extensions like CFA offset adjustement and save locations of SVE
registers.
This pass takes advantage of the constraints that LLVM imposes on the
placement of save/restore points (cf. `ShrinkWrap.cpp`):
* there is a single basic block, containing the function prologue
* possibly multiple epilogue blocks, where each epilogue block is
complete and self-contained, i.e. CSR restore instructions (and the
corresponding CFI instructions are not split across two or more
blocks.
* prologue and epilogue blocks are outside of any loops
Thus, during execution, at the beginning and at the end of each basic
block the function can be in one of two states:
- "has a call frame", if the function has executed the prologue, or
has not executed any epilogue
- "does not have a call frame", if the function has not executed the
prologue, or has executed an epilogue
These properties can be computed for each basic block by a single RPO
traversal.
In order to accommodate backends which do not generate unwind info in
epilogues we compute an additional property "strong no call frame on
entry" which is set for the entry point of the function and for every
block reachable from the entry along a path that does not execute the
prologue. If this property holds, it takes precedence over the "has a
call frame" property.
From the point of view of the unwind tables, the "has/does not have
call frame" state at beginning of each block is determined by the
state at the end of the previous block, in layout order.
Where these states differ, we insert compensating CFI instructions,
which come in two flavours:
- CFI instructions, which reset the unwind table state to the
initial one. This is done by a target specific hook and is
expected to be trivial to implement, for example it could be:
```
.cfi_def_cfa <sp>, 0
.cfi_same_value <rN>
.cfi_same_value <rN-1>
...
```
where `<rN>` are the callee-saved registers.
- CFI instructions, which reset the unwind table state to the one
created by the function prologue. These are the sequence:
```
.cfi_restore_state
.cfi_remember_state
```
In this case we also insert a `.cfi_remember_state` after the
last CFI instruction in the function prologue.
Reviewed By: MaskRay, danielkiss, chill
Differential Revision: https://reviews.llvm.org/D114545
We could only do this in limited ways (since we emit the TUs first, we
can't use ref_addr (& we can't use that in Split DWARF either) - so we
had to synthesize declarations into the TUs) and they were ambiguous in
some cases (if the CU type had internal linkage, parsing the TU would
require knowing which CU was referencing the TU to know which type the
declaration was for, which seems not-ideal). So to avoid all that, let's
just not reference types defined in the CU from TUs - instead moving the
TU type into the CU (recursively).
This does increase debug info size (by pulling more things out of type
units, into the compile unit) - about 2% of uncompressed dwp file size
for clang -O0 -g -gsplit-dwarf. (5% .debug_info.dwo section size
increase in the .dwp)
There is a case when a function has pseudo probe intrinsics but the module it resides does not have the probe desc. This could happen when the current module is not built with `-fpseudo-probe-for-profiling` while a function in it calls some other function from a probed module. In thinLTO mode, the callee function could be imported and inlined into the current function.
While this is undefined behavior, I'm fixing the asm printer to not ICE and warn user about this.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D121737
`DIE::getUnitDie` looks up parent DIE until compile unit or type unit is found. However for skeleton CU with debug fission, we would have DW_TAG_skeleton_unit instead of DW_TAG_compile_unit as top level DIE.
This change fixes the look up so we can get DW_TAG_skeleton_unit as UnitDie for skeleton CU.
Differential Revision: https://reviews.llvm.org/D120610
This reverts commit 029283c1c0d8d06fbf000f5682c56b8595a1101f.
The code in `ELFFile::decodeBBAddrMap` was not changed in the submitted patch.
Differential Revision: https://reviews.llvm.org/D120457
Conceptually, the new encoding emits the offsets and sizes as label differences between each two consecutive basic block begin and end label. When decoding, the offsets must be aggregated along with basic block sizes to calculate the final relative-to-function offsets of basic blocks.
This encoding uses smaller values compared to the existing one (offsets relative to function symbol).
Smaller values tend to occupy fewer bytes in ULEB128 encoding. As a result, we get about 25% reduction
in the size of the bb-address-map section (reduction from about 9MB to 7MB).
Reviewed By: tmsriram, jhenderson
Differential Revision: https://reviews.llvm.org/D106421
As usual with that header cleanup series, some implicit dependencies now need to
be explicit:
llvm/MC/MCParser/MCAsmParser.h no longer includes llvm/MC/MCParser/MCAsmLexer.h
Preprocessed lines to build llvm on my setup:
after: 1068185081
before: 1068324320
So no compile time benefit to expect, but we still get the looser coupling
between files which is great.
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119359
When we enable -fsplit-dwarf-inlining we end up with two entries
in .debug_aranges for each CU. Because it processes Skeleton CU
inline information and DWO CU.
Furthermore address calculations were incorrect because we were processing sections in Skeleton CU.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D118857
Instead of checking for a bitcast from a function type, check
whether the aliasee is a function after stripping bitcasts. This
is not strictly equivalent, but serves the same purpose.
This was using the ugly tablegenerated register enum names, which are
really hideous for register tuples on AMDGPU. Use the prettier names
which are recognized by the asm parser.
This reverts commit ab4756338c5b2216d52d9152b2f7e65f233c4dac.
Breaks some cases, including this:
namespace {
template <typename> struct a {};
} // namespace
class c {
c();
};
class b {
b();
a<c> ax;
};
b::b() {}
c::c() {}
By producing a reference to a type unit for "c" but not producing the type unit.
On the level of the generated object files, both symbols (both
original and alias) are generally indistinguishable - both are
regular defined symbols. But previously, only the original
function had the COFF ComplexType set to IMAGE_SYM_DTYPE_FUNCTION,
while the symbol created via an alias had the type set to
IMAGE_SYM_DTYPE_NULL.
This matches what GCC does, which emits directives for setting the
COFF symbol type for this kind of alias symbol too.
This makes a difference when GNU ld.bfd exports symbols without
dllexport directives or a def file - it seems to decide between
function or data exports based on the COFF symbol type. This means
that functions created via aliases, like some C++ constructors,
are exported as data symbols (missing the thunk for calling without
dllimport).
The hasnt been an issue when doing the same with LLD, as LLD decides
between function or data export based on the flags of the section
that the symbol points at.
This should fix the root cause of
https://github.com/msys2/MINGW-packages/issues/10547.
Differential Revision: https://reviews.llvm.org/D118328
