Add new intrinsic and codegen support for the s_sendmsg_rtn_b32 and
s_sendmsg_rtn_b64 instructions.
Differential Revision: https://reviews.llvm.org/D127315
In GFX10 dlc controlled L1 cache bypass. In GFX11 it has been repurposed
to control MALL NOALLOC, and glc controls L1 as well as L0 cache bypass.
Update the documentation and SIMemoryLegalizer accordingly. Set dlc for
nontemporal and volatile accesses.
Differential Revision: https://reviews.llvm.org/D127405
Changes for GFX11:
- Clauses may not mix instructions of different types, and there are
more types. For example image instructions with and without a sampler
are now different types.
- The max size of a clause is explicitly documented as 63 instructions.
Previously it was implicitly assumed to be 64. This is such a tiny
difference that it does not seem worth making it conditional on the
subtarget.
- It can be beneficial to clause stores as well as loads.
Differential Revision: https://reviews.llvm.org/D127391
Nic Curtis done the experiments to prove it is faster than a
separate mul and add.
Fixes: SWDEV-332806
Differential Revision: https://reviews.llvm.org/D127253
- VOP3 and SDWA forms of V_CMPX were not handled
- Hazard only exists if the compare defines EXEC (i.e. V_CMPX)
forwarded to the permlane.
Differential Revision: https://reviews.llvm.org/D127344
The generic legalizer framework is still used to reduce the problem
to scalar multiplication with the bit size a multiple of 32.
Generating optimal code sequences for big integer multiplication is
somewhat tricky and has a number of target-specific intricacies:
- The target has V_MAD_U64_U32 instructions that multiply two 32-bit
factors and add a 64-bit accumulator. Most partial products should
use this instruction.
- The accumulator is mapped to consecutive 32-bit GPRs, and partial-
product multiply-adds can feed the accumulator into each other
directly. (The register allocator's support for that is somewhat
limited, but that only matters for 128-bit integers and larger.)
- OTOH, on some hardware, V_MAD_U64_U32 requires the accumulator
to be stored in an even-aligned pair of GPRs. To avoid excessive
register copies, it makes sense to compute odd partial products
separately from even partial products (where a partial product
src0[j0] * src1[j1] is "odd" if j0 + j1 is odd) and add both
halves together as a final step.
- We can combine G_MUL+G_ADD into a single cascade of multiply-adds.
- The target can keep many carry-bits in flight simultaneously, so
combining carries using G_UADDE is preferable over G_ZEXT + G_ADD.
- Not addressed by this patch: When the factors are sign-extended,
the V_MAD_I64_I32 instruction (signed version!) can be used.
It is difficult to address these points generically:
1) Finding matching pairs of G_MUL and G_UMULH to find a wide
multiply is expensive. We could add a G_UMUL_LOHI generic instruction
and conditionally use that in the generic legalizer, but by itself
this wouldn't allow us to use the accumulation capability of
V_MAD_U64_U32. One could attempt to find matching G_ADD + G_UADDE
post-legalization, but this is also expensive.
2) Similarly, making sense of the legalization outcome of a wide
pre-legalization G_MUL+G_ADD pair is extremely expensive.
3) How could the generic legalizer possibly deal with the
particular idiosyncracy of "odd" vs. "even" partial products.
All this points in the direction of directly emitting an ideal code
sequence during legalization, but the generic legalizer should not
be burdened with such overly target-specific concerns. Hence, a
custom legalization.
Note that the implemented approach is different from that used by
SelectionDAG because narrowing of scalars works differently in
general. SelectionDAG iteratively cuts wide scalars into low and
high halves until a legal size is reached. By contrast, GlobalISel
does the narrowing in a single shot, which should be better for
compile-time and for the quality of the generated code.
This patch leaves three gaps open:
1. When the factors are uniform, we should execute the multiplication on
the SALU. Register bank mapping already ensures this.
However, the resulting code sequence is not optimal because it doesn't
fully use the carry-in capabilities of S_ADDC_U32. (V_MAD_U64_U32
doesn't have a carry-in.) It is very difficult to fix this after the
fact, so we should really use a different legalization sequence in
this case. Unfortunately, we don't have a divergence analysis and so
cannot make that choice.
(This only matters for 128-bit integers and larger.)
2. Avoid unnecessary multiplies when sources are known to be zero- or
sign-extended. The challenge is that the legalizer does not currently
have access to GISelKnownBits.
3. When the G_MUL is followed by a G_ADD, we should consider combining
the two instructions into a single multiply-add sequence, to utilize
the accumulator of V_MAD_U64_U32 fully. (Unless the multiply has
multiple uses and the implied duplication of the multiply is an
overall negative). However, this is also not true when the factors
are uniform: in that case, it is generally better to *not* combine
the two operations, so that the multiply can be done on the SALU.
Again, we don't have a divergence analysis available and so cannot
make an informed choice.
Differential Revision: https://reviews.llvm.org/D124844
Use the query that doesn't assert if TracksLiveness isn't set, which
needs to always be available. We also need to start printing liveins
regardless of TracksLiveness.
The AMDGPUResourceUsageAnalysis was previously a CGSCC pass, and assumed
that a function's callees were always analyzed prior to their callees.
When it was refactored into a module pass, this assumption no longer
always holds. This results in calls being erroneously identified as
indirect, and reserving private segment space for them. This results in
significantly slower kernel launch latency.
This patch changes the order in which the module's functions are analyzed
from the order in which they occur in the module to a post-order traversal
of the call graph. Perhaps Clang always generates the module's functions
in such an order, but this is not the case for the Cray Fortran compiler.
Reviewed By: #amdgpu, arsenm
Differential Revision: https://reviews.llvm.org/D126025
If all available vals to basic block are the same - do not build new phi node and
just use this value.
Reviewed By: sameerds
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D126525
This patch improves the codegen of extractelement and insertelement for vector
containing 8 elements. Before, a dag combine transformation was generating a
sequence of 8 select/cmp.
This patch changes the upper limit for this transformation and the movrel
instruction will eventually be used instead. Extractlement/insertelement for
vectors containing less than 8 elements are unchanged.
Differential Revision: https://reviews.llvm.org/D126389
This enabled opaque pointers by default in LLVM. The effect of this
is twofold:
* If IR that contains *neither* explicit ptr nor %T* types is passed
to tools, we will now use opaque pointer mode, unless
-opaque-pointers=0 has been explicitly passed.
* Users of LLVM as a library will now default to opaque pointers.
It is possible to opt-out by calling setOpaquePointers(false) on
LLVMContext.
A cmake option to toggle this default will not be provided. Frontends
or other tools that want to (temporarily) keep using typed pointers
should disable opaque pointers via LLVMContext.
Differential Revision: https://reviews.llvm.org/D126689
Adds MVT::v128i2, MVT::v64i4, and implied MVT::i2, MVT::i4.
Keeps MVT::i2, MVT::i4 lowering actions as expand, which should be
removed once targets set this explicitly.
Adjusts 11 lit tests to reflect slightly different behavior during
DAG combine.
Differential Revision: https://reviews.llvm.org/D125247
Adds MVT::v128i2, MVT::v64i4, and implied MVT::i2, MVT::i4.
Keeps MVT::i2, MVT::i4 lowering actions as `expand`, which should be
removed once targets set this explicitly.
Adjusts 11 lit tests to reflect slightly different behavior during
DAG combine.
Differential Revision: https://reviews.llvm.org/D125247
Rename CalleeSavedRegs defs to avoid being overly specific:
* CSR_AMDGPU_AGPRs_32_255 => CSR_AMDGPU_AGPRs
* CSR_AMDGPU_SGPRs_30_31 + CSR_AMDGPU_SGPRs_32_105 => CSR_AMDGPU_SGPRs
* CSR_AMDGPU_SI_Gfx_SGPRs_4_29 + CSR_AMDGPU_SI_Gfx_SGPRs_64_105 =>
CSR_AMDGPU_SI_Gfx_SGPRs
* CSR_AMDGPU_HighRegs => CSR_AMDGPU
* CSR_AMDGPU_HighRegs_With_AGPRs => CSR_AMDGPU_GFX90AInsts
* CSR_AMDGPU_SI_Gfx_With_AGPRs => CSR_AMDGPU_SI_Gfx_GFX90AInsts
Introduce a class RegMask to mark the cases where we use the
CalleeSavedRegs class purely as an expedient way to produce a mask.
Update the names of these masks to not mention "CSR". Other targets also
seem to do this, so a reasonable alternative is to actually update
table-gen to include a new class to do this explicitly, but the current
approach seems harmless so I opted to just make it more explicit.
Reviewed By: arsenm, sebastian-ne
Differential Revision: https://reviews.llvm.org/D109008
This patch implements a DAG mutation which adds edges between different groups of instructions. The purpose is to try to generate code that conforms to a pipeline (groupA instructions occur before groupB, groupB -> groupC, and so on). Currently the pipeline order is hardcoded as VMEM->DSRead->MFMA->DSWrite, but the patch was designed to be easily extensible. Alias analysis is problematic for pipelining as memory instructions will usually not be able to be reordered w.r.t one another.
Differential Revision: https://reviews.llvm.org/D125997
These generic instructions are trivially selected to
V_MAD_[IU]64_[IU]32 instructions when run on the VALU.
When at least both factors are scalar, it is usually better to execute
some or all of the instruction on the SALU. To this end, we lower the
instruction to simpler instructions that are supported on the SALU
when applying the register bank mapping.
Differential Revision: https://reviews.llvm.org/D124843
Today, text section prefixes (none, .unlikely, .hot, and .unkown) are determined based on PGO profile. However, Propeller may deem a function hot when PGO doesn't. Besides, when `-Wl,-keep-text-section-prefix=true` Propeller cannot enforce a global section ordering as the linker can only reorder sections within each output section (.text, .text.hot, .text.unlikely).
This patch promotes all functions with Propeller profiles (functions listed in the basic-block-sections profile) to .text.hot. The feature is hidden behind the flag `--bbsections-guided-section-prefix` which defaults to `true`.
The new implementation refactors the parsing of basic block sections profile into a new `BasicBlockSectionsProfileReader` analysis pass. This allows us to use the information earlier in `CodeGenPrepare` in order to set the functions text prefix. `BasicBlockSectionsProfileReader` will be used both by `BasicBlockSections` pass and `CodeGenPrepare`.
Differential Revision: https://reviews.llvm.org/D122930
reapply 62a9b36fcf728b104ea87e6eb84c0be69b779df7 and fix module build
failue:
1: remove MachineCycleInfoWrapperPass in MachinePassRegistry.def
MachineCycleInfoWrapperPass is a anylysis pass, should not be there.
2: move the definition for MachineCycleInfoPrinterPass to cpp file.
Otherwise, there are module conflicit for MachineCycleInfoWrapperPass
in MachinePassRegistry.def and MachineCycleAnalysis.h after
62a9b36fcf728b104ea87e6eb84c0be69b779df7.
MachineCycle can handle irreducible loop. Natural loop
analysis (MachineLoop) can not return correct loop depth if
the loop is irreducible loop. And MachineSink is sensitive
to the loop depth, see MachineSinking::isProfitableToSinkTo().
This patch tries to use MachineCycle so that we can handle
irreducible loop better.
Reviewed By: sameerds, MatzeB
Differential Revision: https://reviews.llvm.org/D123995
A later change will add a 3rd user, so factoring out the common code
seems useful.
Reorganizing the executeInWaterfallLoop causes some more COPYs to be
generated, but those all fold away during instruction selection.
Generating the comparisons uses generic instructions over machine
instructions now which admittedly shouldn't make a difference
(though it should make it easier to move the waterfall loop generation
to another place).
(Resubmit with missing test added.)
Differential Revision: https://reviews.llvm.org/D125324
A later change will add a 3rd user, so factoring out the common code
seems useful.
Reorganizing the executeInWaterfallLoop causes some more COPYs to be
generated, but those all fold away during instruction selection.
Generating the comparisons uses generic instructions over machine
instructions now which admittedly shouldn't make a difference
(though it should make it easier to move the waterfall loop generation
to another place).
Differential Revision: https://reviews.llvm.org/D125324
This adds support for pointer types for `atomic xchg` and let us write
instructions such as `atomicrmw xchg i64** %0, i64* %1 seq_cst`. This
is similar to the patch for allowing atomicrmw xchg on floating point
types: https://reviews.llvm.org/D52416.
Differential Revision: https://reviews.llvm.org/D124728
This fixed build failure with expensive checks after D126009.
The change has added new run lines for Global ISel which has
uncovered a pre-existing problem: it does not select a correct
flavor of these image instructions.
Even though single address image instructions only use a single VGPR
HW accesses 4 or 5 which creates alignment requirement.
Fixes: SWDEV-316648
Differential Revision: https://reviews.llvm.org/D126009
MachineCycle can handle irreducible loop. Natural loop
analysis (MachineLoop) can not return correct loop depth if
the loop is irreducible loop. And MachineSink is sensitive
to the loop depth, see MachineSinking::isProfitableToSinkTo().
This patch tries to use MachineCycle so that we can handle
irreducible loop better.
Reviewed By: sameerds, MatzeB
Differential Revision: https://reviews.llvm.org/D123995
This brings the MachineInstrs in line with the corresponding intrinsics
which have side effects but do not access memory. It also matches how
BUF cache invalidation instructions are defined.
The lit test changes are just because the machine scheduler previously
treated them like loads, and added an artificial scheduling edge from
them to the exit SU, which caused them to be scheduled earlier.
Differential Revision: https://reviews.llvm.org/D126074
Extend SIInstrInfo::isOperandLegal to enforce a limit on the number of
literal operands for all VALU instructions, not just VOP3. In particular
it now handles VOP2 instructions with a mandatory literal operand like
V_FMAAK_F32.
Differential Revision: https://reviews.llvm.org/D126064
Extend the literal operand checking in SIInstrInfo::verifyInstruction to
check VOP2 instructions like V_FMAAK_F32 which have a mandatory literal
operand. The rule is that src0 can also be a literal, but only if it is
the same literal value.
AMDGPUAsmParser::validateConstantBusLimitations already handles this
correctly.
Differential Revision: https://reviews.llvm.org/D126063
AMDGPUAsmParser::validateSOPLiteral already knew about this but
SIInstrInfo::verifyInstruction did not.
Differential Revision: https://reviews.llvm.org/D125976
Fold immediates regardless of how many uses they have. This is expected
to increase overall code size, but decrease register usage.
Differential Revision: https://reviews.llvm.org/D114644
Previously SIFoldOperands::foldInstOperand would only fold a
non-inlinable immediate into a single user, so as not to increase code
size by adding the same 32-bit literal operand to many instructions.
This patch removes that restriction, so that a non-inlinable immediate
will be folded into any number of users. The rationale is:
- It reduces the number of registers used for holding constant values,
which might increase occupancy. (On the other hand, many of these
registers are SGPRs which no longer affect occupancy on GFX10+.)
- It reduces ALU stalls between the instruction that loads a constant
into a register, and the instruction that uses it.
- The above benefits are expected to outweigh any increase in code size.
Differential Revision: https://reviews.llvm.org/D114643
