A crash was happening when both ObjC Category Merging and Relative
method lists were enabled.
ObjC Category Merging creates new data sections and adds them by calling
`addInputSection`. `addInputSection` uses the symbols within the added
section to determine which container to actually add the section to.
The issue is that ObjC Category merging is calling `addInputSection`
before actually adding the relevant symbols the the added section. This
causes `addInputSection` to add the `InputSection` to the wrong
container, eventually resulting in a crash.
To fix this, we ensure that ObjC Category Merging calls
`addInputSection` only after the symbols have been added to the
`InputSection`.
This was done as an afterthought in c3c9e4531287 without justification.
Nothing relies on it being a specific kind of section, and downstream in
CHERI LLVM we pass a non-GotSection to this function. Thus revert this
overly-restrictive change and allow downstreams to pass other section
types again.
This partially reverts commit c3c9e45312874ff890723f54cabfd41e43b2dbc4.
Local data is referenced in Objective-C metadata via section + offset
relocations on x86-64 rather than via symbols. Without this change, we
would crash on incorrect casts of the referents to `Defined`.
A basic test based on the existing `objc-relative-method-lists-simple.s`
adopted to x86-64 is added.
so that --noinhibit-exec downgrades the error to a warning, which helps
debugging when `PHDRS` is specified without `PT_TLS`. Also update the
message to make it accurate: STT_TLS may exist in the absence of PT_TLS.
In addition, invoking `exitLld(1)` (through `fatal`) is problematic
(#66974): When a thread is `exitLld(1)`, triggering `llvm_shutdown`,
another thread may be at `relocateAlloc`, accessing `sec.relocs()` which
got destroyed(tampered?), leading to
incorrect `llvm_unreachable("invalid expression")`.
\#92331 tried to make `ObjCARCContractPass` by default, but it caused a
regression on O0 builds and was reverted.
This patch trys to bring that back by:
1. reverts the
[revert](1579e9ca9c).
2. `createObjCARCContractPass` only on optimized builds.
Tests are updated to refelect the changes. Specifically, all `O0` tests
should not include `ObjCARCContractPass`
Signed-off-by: Peter Rong <PeterRong@meta.com>
Follow-up to #98115. For EhInputSection, RelocationScanner::scan calls
sortRels, which doesn't support the CREL iterator. We should set
supportsCrel to false to ensure that the initial_location fields in
.eh_frame FDEs are relocated.
This patch makes `objc_relative_method_lists` default on MacOS 11+ / iOS
14+. Manual override still work if command line argument is provided.
To test this change, many explicit arguments are removed from the test
files. Some explicit `no_objc_relative...` are also added for tests that
don't support this yet.
Signed-off-by: Peter Rong <PeterRong@meta.com>
Fix the builds with LLVM_TOOL_LLVM_DRIVER_BUILD enabled.
LLVM_ENABLE_EXPORTED_SYMBOLS_IN_EXECUTABLES is not completely
compatible with export_executable_symbols as the later will be ignored
if the previous is set to NO.
Fix the issue by passing if symbols need to be exported to
llvm_add_exectuable so the link flag can be determined directly
without calling export_executable_symbols_* later.
Previously, we selected the Thumb2 PLT sequences if any input object is
marked as not supporting the ARM ISA, which then causes assertion
failures when calls from ARM code in other objects are seen. I think the
intention here was to only use Thumb PLTs when the target does not have
the ARM ISA available, signalled by no objects being marked as having it
available. To do that we need to track which ISAs we have seen as we
parse the build attributes, and defer the decision about PLTs until all
input objects have been parsed.
This bug was triggered by real code in picolibc, which have some
versions of string.h functions built with Thumb2-only build attributes,
so that they are compatible with v7-A, v7-R and v7-M.
Fixes#99008.
Resolved the issue in MachO/lto-object-path.ll test where
'ZERO_AR_DATE=0' was not recognized as a command. Changed the test
command to set the environment variable correctly using 'env'. This
allows that the environment variable is set properly, allowing the test
to pass.
`LLVM_ENABLE_EXPORTED_SYMBOLS_IN_EXECUTABLES` is not completely
compatible with `export_executable_symbols` as the later will be ignored
if the previous is set to NO.
Fix the issue by passing if symbols need to be exported to
`llvm_add_exectuable` so the link flag can be determined directly
without calling `export_executable_symbols_*` later.
This allows the input section matching algorithm to be separated from
output section descriptions. This allows a group of sections to be
assigned to multiple output sections, providing an explicit version of
--enable-non-contiguous-regions's spilling that doesn't require altering
global linker script matching behavior with a flag. It also makes the
linker script language more expressive even if spilling is not intended,
since input section matching can be done in a different order than
sections are placed in an output section.
The implementation reuses the backend mechanism provided by
--enable-non-contiguous-regions, so it has roughly similar semantics and
limitations. In particular, sections cannot be spilled into or out of
INSERT, OVERWRITE_SECTIONS, or /DISCARD/. The former two aren't
intrinsic, so it may be possible to relax those restrictions later.
LLVM Symbolizer attempt to symbolize addresses of optimized binaries
reports missing line numbers for some cases. It maybe due to compiler
which sometimes cannot map an instruction to line number due to
optimizations. Symbolizer should handle those cases gracefully.
Adding an option '--skip-line-zero' to symbolizer so as to report the
nearest non-zero line number.
---------
Co-authored-by: Amit Pandey <amit.pandey@amd.com>
Ctx was introduced in March 2022 as a more suitable place for such
singletons. ctx's hidden visibility optimizes generated instructions.
This change fixes a pitfall: certain ElfSym members (e.g.
globalOffsetTable, tlsModuleBase) were not zeroed and might be stale
when lld:🧝:link was invoked the second time.
Ctx was introduced in March 2022 as a more suitable place for such
singletons. ctx's hidden visibility optimizes generated instructions.
bufferStart and tlsPhdr, which are not OutputSection, can now be moved
outside of `Out`.
Add the "Separate" option `--irpgo-profile-sort <profile` instead of
just the "Joined" option `--irpgo-profile-sort=<profile>`. This is
useful if the path has a `,` for some reason which would break when
trying to use `-Wl,--irpgo-profile-sort=<profile-with-comma>`.
While I'm here, use `static_cast<>` instead of the C style cast
introduced in https://github.com/llvm/llvm-project/pull/100627
... using the temporary section type code 0x40000020
(`clang -c -Wa,--crel,--allow-experimental-crel`). LLVM will change the
code and break compatibility (Clang and lld of different versions are
not guaranteed to cooperate, unlike other features). CREL with implicit
addends are not supported.
---
Introduce `RelsOrRelas::crels` to iterate over SHT_CREL sections and
update users to check `crels`.
(The decoding performance is critical and error checking is difficult.
Follow `skipLeb` and `R_*LEB128` handling, do not use
`llvm::decodeULEB128`, whichs compiles to a lot of code.)
A few users (e.g. .eh_frame, LLDDwarfObj, s390x) require random access. Pass
`/*supportsCrel=*/false` to `relsOrRelas` to allocate a buffer and
convert CREL to RELA (`relas` instead of `crels` will be used). Since
allocating a buffer increases, the conversion is only performed when
absolutely necessary.
---
Non-alloc SHT_CREL sections may be created in -r and --emit-relocs
links. SHT_CREL and SHT_RELA components need reencoding since
r_offset/r_symidx/r_type/r_addend may change. (r_type may change because
relocations referencing a symbol in a discarded section are converted to
`R_*_NONE`).
* SHT_CREL components: decode with `RelsOrRelas` and re-encode (`OutputSection::finalizeNonAllocCrel`)
* SHT_RELA components: convert to CREL (`relToCrel`). An output section can only have one relocation section.
* SHT_REL components: print an error for now.
SHT_REL to SHT_CREL conversion for -r/--emit-relocs is complex and
unsupported yet.
Link: https://discourse.llvm.org/t/rfc-crel-a-compact-relocation-format-for-elf/77600
Pull Request: https://github.com/llvm/llvm-project/pull/98115
GNU ld since 2.41 supports this option, which is mildly useful. It omits
the section header table and non-ALLOC sections (including
.symtab/.strtab (--strip-all)).
This option is simple to implement and might be used by LLDB to test
program headers parsing without the section header table (#100900).
-z sectionheader, which is the default, is also added.
Pull Request: https://github.com/llvm/llvm-project/pull/101286
If an included script is under the sysroot directory, when it opens an
absolute path file (`INPUT` or `GROUP`), add sysroot before the absolute
path. When the included script ends, the `isUnderSysroot` state is
restored.
Fix#93947: the cycle detection mechanism added by
https://reviews.llvm.org/D37524 also disallowed including a file twice,
which is an unnecessary limitation.
Now that we have an include stack #100493, supporting multiple inclusion
is trivial. Note: a filename can be referenced with many different
paths, e.g. a.lds, ./a.lds, ././a.lds. We don't attempt to detect the
cycle in the earliest point.
`getLineNumber` is both imprecise (when `INCLUDE` is used) and
inefficient (see https://reviews.llvm.org/D104137). Track line number
precisely now that we have `struct Buffer` abstraction from #100493.
