10494 Commits

Author SHA1 Message Date
Benjamin Kramer
fc3ea6f4bc Don't use a potentially expensive shift if all we want is one set bit.
No functionality change.

llvm-svn: 186095
2013-07-11 16:05:50 +00:00
Arnold Schwaighofer
e97c71b8fd LoopVectorize: Vectorize all accesses in address space zero with unit stride
We can vectorize them because in the case where we wrap in the address space the
unvectorized code would have had to access a pointer value of zero which is
undefined behavior in address space zero according to the LLVM IR semantics.
(Thank you Duncan, for pointing this out to me).

Fixes PR16592.

llvm-svn: 186088
2013-07-11 15:21:55 +00:00
Duncan Sands
e773c08021 TryToSimplifyUncondBranchFromEmptyBlock was checking that any common
predecessors of the two blocks it is attempting to merge supply the
same incoming values to any phi in the successor block.  This change
allows merging in the case where there is one or more incoming values
that are undef.  The undef values are rewritten to match the non-undef
value that flows from the other edge.  Patch by Mark Lacey.

llvm-svn: 186069
2013-07-11 08:28:20 +00:00
Nadav Rotem
08efb262a9 Fix a warning.
llvm-svn: 186064
2013-07-11 05:39:02 +00:00
Nadav Rotem
b8dd66f655 SLPVectorizer: refactor the code that places extracts. Place the code that decides where to put extracts in the build-tree phase. This allows us to take the cost of the extracts into account.
llvm-svn: 186058
2013-07-11 04:54:05 +00:00
Michael Gottesman
b40db26eae Teach TailRecursionElimination to handle certain cases of nocapture escaping allocas.
Without the changes introduced into this patch, if TRE saw any allocas at all,
TRE would not perform TRE *or* mark callsites with the tail marker.

Because TRE runs after mem2reg, this inadequacy is not a death sentence. But
given a callsite A without escaping alloca argument, A may not be able to have
the tail marker placed on it due to a separate callsite B having a write-back
parameter passed in via an argument with the nocapture attribute.

Assume that B is the only other callsite besides A and B only has nocapture
escaping alloca arguments (*NOTE* B may have other arguments that are not passed
allocas). In this case not marking A with the tail marker is unnecessarily
conservative since:

  1. By assumption A has no escaping alloca arguments itself so it can not
     access the caller's stack via its arguments.

  2. Since all of B's escaping alloca arguments are passed as parameters with
     the nocapture attribute, we know that B does not stash said escaping
     allocas in a manner that outlives B itself and thus could be accessed
     indirectly by A.

With the changes introduced by this patch:

  1. If we see any escaping allocas passed as a capturing argument, we do
     nothing and bail early.

  2. If we do not see any escaping allocas passed as captured arguments but we
     do see escaping allocas passed as nocapture arguments:

       i. We do not perform TRE to avoid PR962 since the code generator produces
          significantly worse code for the dynamic allocas that would be created
          by the TRE algorithm.

       ii. If we do not return twice, mark call sites without escaping allocas
           with the tail marker. *NOTE* This excludes functions with escaping
           nocapture allocas.

  3. If we do not see any escaping allocas at all (whether captured or not):

       i. If we do not have usage of setjmp, mark all callsites with the tail
          marker.

       ii. If there are no dynamic/variable sized allocas in the function,
           attempt to perform TRE on all callsites in the function.

Based off of a patch by Nick Lewycky.

rdar://14324281.

llvm-svn: 186057
2013-07-11 04:40:01 +00:00
Michael Gottesman
6eb95dc2f7 [objc-arc] Changed 'mode: c++' => 'C++' at Nick Lewycky's suggestion. Also removed unnecessary mode: c++ lines from .cpp files.
llvm-svn: 186026
2013-07-10 18:49:00 +00:00
Peter Collingbourne
49062a97cf Implement categories for special case lists.
A special case list can now specify categories for specific globals,
which can be used to instruct an instrumentation pass to treat certain
functions or global variables in a specific way, such as by omitting
certain aspects of instrumentation while keeping others, or informing
the instrumentation pass that a specific uninstrumentable function
has certain semantics, thus allowing the pass to instrument callers
according to those semantics.

For example, AddressSanitizer now uses the "init" category instead of
global-init prefixes for globals whose initializers should not be
instrumented, but which in all other respects should be instrumented.

The motivating use case is DataFlowSanitizer, which will have a
number of different categories for uninstrumentable functions, such
as "functional" which specifies that a function has pure functional
semantics, or "discard" which indicates that a function's return
value should not be labelled.

Differential Revision: http://llvm-reviews.chandlerc.com/D1092

llvm-svn: 185978
2013-07-09 22:03:17 +00:00
Peter Collingbourne
2eb048d230 Introduce a SpecialCaseList ctor which takes a MemoryBuffer to make
it more unit testable, and fix memory leak in the other ctor.

Differential Revision: http://llvm-reviews.chandlerc.com/D1090

llvm-svn: 185976
2013-07-09 22:03:09 +00:00
Peter Collingbourne
015370e23a Rename BlackList class to SpecialCaseList and move it to Transforms/Utils.
Differential Revision: http://llvm-reviews.chandlerc.com/D1089

llvm-svn: 185975
2013-07-09 22:02:49 +00:00
Nadav Rotem
d7b574e5b3 Fix PR16571, which is a bug in the code that checks that all of the types in the bundle are uniform.
llvm-svn: 185970
2013-07-09 21:38:08 +00:00
Nadav Rotem
861bef7dd0 Set the default insert point to the first instruction, and not to end()
llvm-svn: 185953
2013-07-09 17:55:36 +00:00
David Majnemer
eeed73b981 InstCombine: Fix typo in comment for visitICmpInstWithInstAndIntCst
llvm-svn: 185916
2013-07-09 09:24:35 +00:00
David Majnemer
72d76275ac InstCombine: variations on 0xffffffff - x >= 4
The following transforms are valid if -C is a power of 2:
(icmp ugt (xor X, C), ~C) -> (icmp ult X, C)
(icmp ult (xor X, C), -C) -> (icmp uge X, C)

These are nice, they get rid of the xor.

llvm-svn: 185915
2013-07-09 09:20:58 +00:00
David Majnemer
414d4e58aa InstCombine: X & -C != -C -> X <= u ~C
Tests were added in r185910 somehow.

llvm-svn: 185912
2013-07-09 08:09:32 +00:00
David Majnemer
bafa537eb7 Commit r185909 was a misapplied patch, fix it
llvm-svn: 185910
2013-07-09 07:58:32 +00:00
David Majnemer
f2a9a513c7 InstCombine: add more transforms
C1-X <u C2 -> (X|(C2-1)) == C1
C1-X >u C2 -> (X|C2) == C1
X-C1 <u C2 -> (X & -C2) == C1
X-C1 >u C2 -> (X & ~C2) == C1

llvm-svn: 185909
2013-07-09 07:50:59 +00:00
Eli Bendersky
07b0e451ca Fix comment
llvm-svn: 185888
2013-07-08 23:57:07 +00:00
Nadav Rotem
c9c57518ab This patch changes the saved IRBuilder insert point from BasicBlock::iterator to AssertingVH.
Commit 185883 fixes a bug in the IRBuilder that should fix the ASan bot. AssertingVH can help in exposing some RAUW problems.

Thanks Ben and Alexey!

llvm-svn: 185886
2013-07-08 23:31:13 +00:00
Michael Gottesman
c1b648f6c0 [objc-arc] Fix assertion in EraseInstruction so that noop on null calls when passed null do not trigger the assert.
The specific case of interest is when objc_retainBlock is passed null.

llvm-svn: 185885
2013-07-08 23:30:23 +00:00
David Majnemer
fa90a0b325 InstCombine: Fold X-C1 <u 2 -> (X & -2) == C1
Back in r179493 we determined that two transforms collided with each
other.  The fix back then was to reorder the transforms so that the
preferred transform would give it a try and then we would try the
secondary transform.  However, it was noted that the best approach would
canonicalize one transform into the other, removing the collision and
allowing us to optimize IR given to us in that form.

llvm-svn: 185808
2013-07-08 11:53:08 +00:00
Nadav Rotem
2ee35771a8 Clear the builder insert point between tree-vectorization phases.
llvm-svn: 185777
2013-07-07 14:57:18 +00:00
Nadav Rotem
2041b742d4 SLPVectorizer: Implement DCE as part of vectorization.
This is a complete re-write if the bottom-up vectorization class.
Before this commit we scanned the instruction tree 3 times. First in search of merge points for the trees. Second, for estimating the cost. And finally for vectorization.
There was a lot of code duplication and adding the DCE exposed bugs. The new design is simpler and DCE was a part of the design.
In this implementation we build the tree once. After that we estimate the cost by scanning the different entries in the constructed tree (in any order). The vectorization phase also works on the built tree.

llvm-svn: 185774
2013-07-07 06:57:07 +00:00
Michael Gottesman
618df456e2 [objc-arc] Remove the alias analysis part of r185764.
Upon further reflection, the alias analysis part of r185764 is not a safe
change.

llvm-svn: 185770
2013-07-07 04:18:03 +00:00
Michael Gottesman
a72630d453 [objc-arc] Teach the ARC optimizer that objc_sync_enter/objc_sync_exit do not modify the ref count of an objc object and additionally are inert for modref purposes.
llvm-svn: 185769
2013-07-07 01:52:55 +00:00
Michael Gottesman
e557da26db [objc-arc] When we initialize ARCRuntimeEntryPoints, make sure we reset all references to entrypoint declarations as well.
llvm-svn: 185764
2013-07-06 18:43:05 +00:00
Benjamin Kramer
3d90a8f4f9 Reassociate: Remove unnecessary default operator=.
llvm-svn: 185757
2013-07-06 15:10:13 +00:00
Michael Gottesman
4d9439c73f [objc-arc] Performed some small cleanups in ARCRuntimeEntryPoints and added an llvm_unreachable after the switch to quiet -Wreturn_type errors.
llvm-svn: 185746
2013-07-06 02:18:56 +00:00
Michael Gottesman
574d521c85 [objc-arc] Renamed Module => TheModule in ARCRuntimeEntryPoints. Also did some small cleanups.
This fixes an issue that came up due to -fpermissive on the bots.

llvm-svn: 185744
2013-07-06 01:57:32 +00:00
Michael Gottesman
01df45056e Removed trailing whitespace.
llvm-svn: 185743
2013-07-06 01:41:35 +00:00
Michael Gottesman
0b912b2673 [objc-arc] Updated ObjCARCContract to use ARCRuntimeEntryPoints.
llvm-svn: 185742
2013-07-06 01:39:26 +00:00
Michael Gottesman
14acfacc48 [objc-arc] Updated ObjCARCOpts to use ARCRuntimeEntryPoints.
llvm-svn: 185741
2013-07-06 01:39:23 +00:00
Michael Gottesman
a94186a4c0 [objc-arc] Refactor runtime entrypoint declaration entrypoint creation.
This is the first patch in a series of 3 patches which clean up how we create
runtime function declarations in the ARC optimizer when they do not exist
already in the IR.

Currently we have a bunch of duplicated code in ObjCARCOpts, ObjCARCContract
that does this. This patch refactors that code into a separate class called
ARCRuntimeEntryPoints which lazily creates the declarations for said
entrypoints.

The next two patches will consist of the work of refactoring
ObjCARCContract/ObjCARCOpts to use this new code.

llvm-svn: 185740
2013-07-06 01:39:18 +00:00
Nick Lewycky
cff2cf8e3a Fix annotation of unlink. Should fix builder.
llvm-svn: 185738
2013-07-06 00:59:28 +00:00
Nick Lewycky
c2ec0725ce Extend 'readonly' and 'readnone' to work on function arguments as well as
functions. Make the function attributes pass add it to known library functions
and when it can deduce it.

llvm-svn: 185735
2013-07-06 00:29:58 +00:00
Rafael Espindola
155cf0f3a6 Use sys::fs::createTemporaryFile.
llvm-svn: 185719
2013-07-05 20:14:52 +00:00
Sylvestre Ledru
751447a3ac Remove a useless declarations (found by scan-build)
llvm-svn: 185709
2013-07-05 15:58:12 +00:00
David Majnemer
c2a990bc00 InstCombine: (icmp eq B, 0) | (icmp ult A, B) -> (icmp ule A, B-1)
This transform allows us to turn IR that looks like:
  %1 = icmp eq i64 %b, 0
  %2 = icmp ult i64 %a, %b
  %3 = or i1 %1, %2
  ret i1 %3

into:
  %0 = add i64 %b, -1
  %1 = icmp uge i64 %0, %a
  ret i1 %1

which means we go from lowering:
        cmpq    %rsi, %rdi
        setb    %cl
        testq   %rsi, %rsi
        sete    %al
        orb     %cl, %al
        ret

to lowering:
        decq    %rsi
        cmpq    %rdi, %rsi
        setae   %al
        ret

llvm-svn: 185677
2013-07-05 00:31:17 +00:00
David Majnemer
37f8f445de InstCombine: Reimplementation of visitUDivOperand
This transform was originally added in r185257 but later removed in
r185415.  The original transform would create instructions speculatively
and then discard them if the speculation was proved incorrect.  This has
been replaced with a scheme that splits the transform into two parts:
preflight and fold.  While we preflight, we build up fold actions that
inform the folding stage on how to act.

llvm-svn: 185667
2013-07-04 21:17:49 +00:00
Benjamin Kramer
371722288c SimplifyCFG: Teach switch generation some patterns that instcombine forms.
This allows us to create switches even if instcombine has munged two of the
incombing compares into one and some bit twiddling. This was motivated by enum
compares that are common in clang.

llvm-svn: 185632
2013-07-04 14:22:02 +00:00
Nick Lewycky
a833c667e2 Tabs to spaces. No functionality change.
llvm-svn: 185612
2013-07-04 03:51:53 +00:00
Craig Topper
af0dea1347 Use SmallVectorImpl::iterator/const_iterator instead of SmallVector to avoid specifying the vector size.
llvm-svn: 185606
2013-07-04 01:31:24 +00:00
Craig Topper
31ee5866de Use SmallVectorImpl::iterator/const_iterator instead of SmallVector to avoid specifying the vector size.
llvm-svn: 185540
2013-07-03 15:07:05 +00:00
Evgeniy Stepanov
dc6d7eb860 [msan] Unpoison stack allocations and undef values in blacklisted functions.
This changes behavior of -msan-poison-stack=0 flag from not poisoning stack
allocations to actively unpoisoning them.

llvm-svn: 185538
2013-07-03 14:39:14 +00:00
Michael Gottesman
2db11161a8 Added support in FunctionAttrs for adding relevant function/argument attributes for the posix call gettimeofday.
This implies annotating it as nounwind and its arguments as nocapture. To be
conservative, we do not annotate the arguments with noalias since some platforms
do not have restrict on the declaration for gettimeofday.

llvm-svn: 185502
2013-07-03 04:00:54 +00:00
Manman Ren
d0e67aa1ce Debug Info: cleanup
llvm-svn: 185456
2013-07-02 18:37:35 +00:00
Hal Finkel
fdbe161b1a Revert r185257 (InstCombine: Be more agressive optimizing 'udiv' instrs with 'select' denoms)
I'm reverting this commit because:

 1. As discussed during review, it needs to be rewritten (to avoid creating and
then deleting instructions).

 2. This is causing optimizer crashes. Specifically, I'm seeing things like
this:

    While deleting: i1 %
    Use still stuck around after Def is destroyed:  <badref> = select i1 <badref>, i32 0, i32 1
    opt: /src/llvm-trunk/lib/IR/Value.cpp:79: virtual llvm::Value::~Value(): Assertion `use_empty() && "Uses remain when a value is destroyed!"' failed.

   I'd guess that these will go away once we're no longer creating/deleting
instructions here, but just in case, I'm adding a regression test.

Because the code is bring rewritten, I've just XFAIL'd the original regression test. Original commit message:

	InstCombine: Be more agressive optimizing 'udiv' instrs with 'select' denoms

	Real world code sometimes has the denominator of a 'udiv' be a
	'select'.  LLVM can handle such cases but only when the 'select'
	operands are symmetric in structure (both select operands are a constant
	power of two or a left shift, etc.).  This falls apart if we are dealt a
	'udiv' where the code is not symetric or if the select operands lead us
	to more select instructions.

	Instead, we should treat the LHS and each select operand as a distinct
	divide operation and try to optimize them independently.  If we can
	to simplify each operation, then we can replace the 'udiv' with, say, a
	'lshr' that has a new select with a bunch of new operands for the
	select.

llvm-svn: 185415
2013-07-02 05:21:11 +00:00
Nick Lewycky
26fcc51f15 Add missing break statements. Noticed by inspection.
llvm-svn: 185414
2013-07-02 05:02:56 +00:00
Manman Ren
74c188f026 Debug Info: clean up usage of Verify.
No functionality change. It should suffice to check the type of a debug info
metadata, instead of calling Verify.

llvm-svn: 185383
2013-07-01 21:02:01 +00:00
Arnold Schwaighofer
ef51cf202b LoopVectorize: Math functions only read rounding mode
Math functions are mark as readonly because they read the floating point
rounding mode. Because we don't vectorize loops that would contain function
calls that set the rounding mode it is safe to ignore this memory read.

llvm-svn: 185299
2013-07-01 00:54:44 +00:00