Follow-up for D74006.
When the integrated assembler is used, we use SHF_LINK_ORDER. The
linked-to symbol is part of ELFSectionKey, thus we can omit the unique
ID.
In https://reviews.llvm.org/rG8b737688c21a9755cae14cb9343930e0882164ab I
switched the condition gating the creation of the descriptor symbol from
checking the MCAsmInfo if we need to support descriptors, to if the OS
was AIX. Technically the 2 should be interchangeable: if we are
targeting AIX then we need to emit XCOFF object files, and the MCAsmInfo
must return true for needing function descriptors.
This doesn't account for lit test with runsteps that only set the arch.
Eg: test/CodeGen/XCore/section-name.ll
which when run natively on AIX we end up with a target xcore-ibm-aix and
needFunctionDescriptors is false.
This patch reverts to using the MCAsmInfo and adds an assert that the
target OS must be AIX since that is the only target using the descriptor
hook.
Differential Revision: https://reviews.llvm.org/D74622
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Instructions marked as FrameSetup do not cause requestLabelAfterInsn to
be called and so no such label is generated. Call instructions which
require call site entries to be generated require this label to be
present in order to calculate the return PC offset/address, but the
check for whether the call instruction is marked as FrameSetup was not
present.
Therefore in the case where a call instruction is marked as FrameSetup,
an assertion failure occurs if a call site entry is to be generated.
This is the case with RISC-V's implementation of save/restore via
library calls.
Differential Revision: https://reviews.llvm.org/D71593
Add the isCandidateForCallSiteEntry predicate to MachineInstr to
determine whether a DWARF call site entry should be created for an
instruction.
For now, it's enough to have any call instruction that doesn't belong to
a blacklisted set of opcodes. For these opcodes, a call site entry isn't
meaningful.
Differential Revision: https://reviews.llvm.org/D74159
Printing floating point number in decimal is inconvenient for humans.
Verbose asm output will print out floating point values in comments, it
helps.
But in lots of cases, users still need additional work to covert the
decimal back to hex or binary to check the bit patterns,
especially when there are small precision difference.
Hexadecimal form is one of the supported form in LLVM IR, and easier for
debugging.
This patch try to print all FP constant in hex form instead.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D73566
Summary:
This patch reorders the emission of debug_str section, so that
string can come after macros.
This is necessary for macro forms like DW_MACRO_define_strp,
which emits macro as a string in debug_str section.
"linked-to section" is used by the ELF spec. By analogy, "linked-to
symbol" is a good name for the signature symbol. The word "linked-to"
implies a directed edge and makes it clear its relation with "sh_link",
while one can argue that "associated" means an undirected edge.
Also, combine tests and add precise SMLoc to improve diagnostics.
Reviewed By: eugenis, grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D74082
Originally committed in: 1ced28cbe75ff81f35ac2c71e941041eb3afcd00
Reverted in: f75301d16d444d8cb6810d679290df744bc79ec7
(reverted due to tests failing on non-linux/x86 targets, tests have since been
generalized and specialized... since Split DWARF isn't supported on non-elf
targets anyway and we have no way to run on "whatever elf target is available"
so they fail on MacOS without an explicit target triple)
This code was incorrectly emitting extra bytes into arbitrary parts of
the object file when it was meant to be hashing them to compute the DWO
ID.
Follow-up patch(es) will refactor this API somewhat to make such bugs
harder to introduce, hopefully.
This extends the RemarkStreamer to allow for other emitters (e.g.
frontends, SIL, etc.) to emit remarks through a common interface.
See changes in llvm/docs/Remarks.rst for motivation and design choices.
Differential Revision: https://reviews.llvm.org/D73676
and follow-ups.
This reverts commit 1ced28cbe75ff81f35ac2c71e941041eb3afcd00.
This reverts commit 4f281f047457ce3f1870a93253476222314f420b.
This reverts commit 552a8fe12bd1822f48dda2e9e8728a179f82d356.
The test fails on non-Linux.
This code was incorrectly emitting extra bytes into arbitrary parts of
the object file when it was meant to be hashing them to compute the DWO
ID.
Follow-up patch(es) will refactor this API somewhat to make such bugs
harder to introduce, hopefully.
Significant missing hashing - as per the comment this was only meant to
skip member functions (unspecified, but I think it's legible as member
function declarations, not definitions) but was skipping all named
subprograms (so only hashed child DIEs for member function definitions -
because they didn't have a direct name, but only a name given indirectly
in the DW_AT_specification-referenced DIE)
- Extends the comments related to function descriptors, noting how they
are only used on AIX.
- Changes the condition used to gate the creation of the current function
symbol in AsmPrinter::SetupMachineFunction to reflect being AIX
specific. The creation of the symbol is different because of AIXs
linkage conventions, not because AIX uses function descriptors.
Differential Revision: https://reviews.llvm.org/D73115
Summary:
For -fpatchable-function-entry=N,0 -mbranch-protection=bti, after
9a24488cb67a90f889529987275c5e411ce01dda, we place the NOP sled after
the initial BTI.
```
.Lfunc_begin0:
bti c
nop
nop
.section __patchable_function_entries,"awo",@progbits,f,unique,0
.p2align 3
.xword .Lfunc_begin0
```
This patch adds a label after the initial BTI and changes the __patchable_function_entries entry to reference the label:
```
.Lfunc_begin0:
bti c
.Lpatch0:
nop
nop
.section __patchable_function_entries,"awo",@progbits,f,unique,0
.p2align 3
.xword .Lpatch0
```
This placement is compatible with the resolution in
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92424 .
A local linkage function whose address is not taken does not need a BTI.
Placing the patch label after BTI has the advantage that code does not
need to differentiate whether the function has an initial BTI.
Reviewers: mrutland, nickdesaulniers, nsz, ostannard
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73680
For `MC_GlobalAddress` operands referencing **certain** GlobalObjects,
we can lower them to STB_LOCAL aliases to avoid costs brought by
assembler/linker's conservative decisions about symbol interposition:
* An assembler conservatively assumes a global default visibility symbol interposable (ELF
semantics). So relocations in object files are needed even if the code generator assumed
the definition exact and non-interposable.
* The relocations can cause the creation of PLT entries on some targets for -shared links.
A linker conservatively assumes a global default visibility symbol interposable (if not
otherwise constrained by -Bsymbolic/--dynamic-list/VER_NDX_LOCAL/etc).
"certain" refers to GlobalObjects in the intersection of
`hasExactDefinition() and !isInterposable()`: `external`, `appending`, `internal`, `private`.
Local linkages (`internal` and `private`) cannot be interposed. `appending` is for very
few objects LLVM interpret specially. So the set just includes `external`.
This patch emits STB_LOCAL aliases (.Lfoo$local) for such GlobalObjects, so that targets can lower
MC_GlobalAddress operands to STB_LOCAL aliases if applicable.
We may extend the scope and include GlobalAlias in the future.
LLVM's existing -fno-semantic-interposition behaviors give us license to do such optimizations:
* Various optimizations (ipconstprop, inliner, sccp, sroa, etc) treat normal ExternalLinkage
GlobalObjects as non-interposable.
* Before D72197, MC resolved a PC-relative VK_None fixup to a non-local symbol at assembly time (no
outstanding relocation), if the target is defined in the same section. Put it simply, even if IR
optimizations failed to optimize and allowed interposition for the function call in
`void foo() {} void bar() { foo(); }`, the assembler would disallow it.
This patch sets up AsmPrinter infrastructure to make -fno-semantic-interposition more so.
With and without the patch, the object file output should be identical:
`.Lfoo$local` does not take a symbol table entry.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D73228
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
This patch fixes an assertion failure in DwarfExpression that is
triggered when a complex fragment has exactly the size of a
subregister of the register the DBG_VALUE points to *and* there is no
DWARF encoding for the super-register.
I took the opportunity to replace/document some magic values with
static constructor functions to make this code less confusing to read.
rdar://problem/58489125
Differential Revision: https://reviews.llvm.org/D72938
This is a revert-of-revert (i.e. this reverts commit 802bec89, which
itself reverted fa4701e1 and 79daafc9) with a fix folded in. The problem
was that call site tags weren't emitted properly when LTO was enabled
along with split-dwarf. This required a minor fix. I've added a reduced
test case in test/DebugInfo/X86/fission-call-site.ll.
Original commit message:
This allows a call site tag in CU A to reference a callee DIE in CU B
without resorting to creating an incomplete duplicate DIE for the callee
inside of CU A.
We already allow cross-CU references of subprogram declarations, so it
doesn't seem like definitions ought to be special.
This improves entry value evaluation and tail call frame synthesis in
the LTO setting. During LTO, it's common for cross-module inlining to
produce a call in some CU A where the callee resides in a different CU,
and there is no declaration subprogram for the callee anywhere. In this
case llvm would (unnecessarily, I think) emit an empty DW_TAG_subprogram
in order to fill in the call site tag. That empty 'definition' defeats
entry value evaluation etc., because the debugger can't figure out what
it means.
As a follow-up, maybe we could add a DWARF verifier check that a
DW_TAG_subprogram at least has a DW_AT_name attribute.
Update #1:
Reland with a fix to create a declaration DIE when the declaration is
missing from the CU's retainedTypes list. The declaration is left out
of the retainedTypes list in two cases:
1) Re-compiling pre-r266445 bitcode (in which declarations weren't added
to the retainedTypes list), and
2) Doing LTO function importing (which doesn't update the retainedTypes
list).
It's possible to handle (1) and (2) by modifying the retainedTypes list
(in AutoUpgrade, or in the LTO importing logic resp.), but I don't see
an advantage to doing it this way, as it would cause more DWARF to be
emitted compared to creating the declaration DIEs lazily.
Update #2:
Fold in a fix for call site tag emission in the split-dwarf + LTO case.
Tested with a stage2 ThinLTO+RelWithDebInfo build of clang, and with a
ReleaseLTO-g build of the test suite.
rdar://46577651, rdar://57855316, rdar://57840415, rdar://58888440
Differential Revision: https://reviews.llvm.org/D70350
The Version was used only to determine the size of an operand of
DW_OP_call_ref. The size was 4 for all versions apart from 2, but
the DW_OP_call_ref operation was introduced only in DWARF3. Thus,
the code may be simplified and using of Version may be eliminated.
Differential Revision: https://reviews.llvm.org/D73264
Summary:
This fixes PR44118. For cases where we have a chain like this:
R8 = R1 (entry value)
R0 = R8
call @foo R0
the code that emits call site entries using entry values would not
follow that chain, instead emitting a call site entry with R8 as
location rather than R0. Such a case was discovered when originally
adding dbgcall-site-orr-moves.mir. This patch fixes that issue. This is
done by changing the ForwardedRegWorklist set to a map in which the
worklist registers always map to the parameter registers that they
describe.
Another thing this patch fixes is that worklist registers now can
describe more than one parameter register at a time. Such a case
occurred in dbgcall-site-interpretation.mir, resulting in a call site
entry not being emitted for one of the parameters.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D73168
Summary:
Since D70431 the describeLoadedValue() hook takes a parameter register,
meaning that it can now be asked to describe any register. This means
that we can drop the difference between explicit and implicit defines
that we previously had in collectCallSiteParameters().
I have not found any case for any upstream targets where a parameter
register is only implicitly defined, and does not overlap with any
explicit defines. I don't know if such a case would even make sense. So
as far as I have tested, this patch should be a non-functional change.
However, this reduces the complexity of the code a bit, and it will
simplify the implementation of an upcoming patch which solves PR44118.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D73167
... as well as:
Revert "[DWARF] Defer creating declaration DIEs until we prepare call site info"
This reverts commit fa4701e1979553c2df61698ac1ac212627630442.
This reverts commit 79daafc90308787b52a5d3a7586e82acd5e374b3.
There have been reports of this assert getting hit:
CalleeDIE && "Could not find DIE for call site entry origin
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
Similar to the function attribute `prefix` (prefix data),
"patchable-function-prefix" inserts data (M NOPs) before the function
entry label.
-fpatchable-function-entry=2,1 (1 NOP before entry, 1 NOP after entry)
will look like:
```
.type foo,@function
.Ltmp0: # @foo
nop
foo:
.Lfunc_begin0:
# optional `bti c` (AArch64 Branch Target Identification) or
# `endbr64` (Intel Indirect Branch Tracking)
nop
.section __patchable_function_entries,"awo",@progbits,get,unique,0
.p2align 3
.quad .Ltmp0
```
-fpatchable-function-entry=N,0 + -mbranch-protection=bti/-fcf-protection=branch has two reasonable
placements (https://gcc.gnu.org/ml/gcc-patches/2020-01/msg01185.html):
```
(a) (b)
func: func:
.Ltmp0: bti c
bti c .Ltmp0:
nop nop
```
(a) needs no additional code. If the consensus is to go for (b), we will
need more code in AArch64BranchTargets.cpp / X86IndirectBranchTracking.cpp .
Differential Revision: https://reviews.llvm.org/D73070
The low_pc is analog to the DW_AT_call_return_pc, since it describes
the return address after the call. The DW_AT_call_pc is the address
of the call instruction, and we don't use it at the moment.
Differential Revision: https://reviews.llvm.org/D73173
Summary:
This was reverted in 328e0f3dcac52171b8cdedeaba22c98e7fbb75ea due to
chromium bot failure. This revision addresses that case.
Original commit message:
Summary:
This patch will provide support for auto return type for the C++ member
functions. Before this return type of the member function is deduced and
stored in the DIE.
This patch includes llvm side implementation of this feature.
Patch by: Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: dblaikie, aprantl, shafik, alok, SouraVX, jini.susan.george
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D70524
This makes the SectionLabel handling more resilient - specifically for
future PROPELLER work which will have more CU ranges (rather than just
one per function).
Ultimately it might be nice to make this more general/resilient to
arbitrary labels (rather than relying on the labels being created for CU
ranges & then being reused by ranges, loclists, and possibly other
addresses). It's possible that other (non-rnglist/loclist) uses of
addresses will need the addresses to be in SectionLabels earlier (eg:
move the CU.addRange to be done on function begin, rather than function
end, so during function emission they are already populated for other
use).
This change has 2 components:
Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.
WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase
The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.
This is a reland of rG3a05c3969c18 with fixes for the expensive-checks
and Windows builds
Differential Revision: https://reviews.llvm.org/D71681
[this re-applies c0176916a4824812d25a5a22c4ff7c95857b0cd6
with the correct commit message and phabricator link]
This addresses point 1 of PR44213.
https://bugs.llvm.org/show_bug.cgi?id=44213
The DW_AT_LLVM_sysroot attribute is used for Clang module debug info,
to allow LLDB to import a Clang module from source. Currently it is
part of each DW_TAG_module, however, it is the same for all modules in
a compile unit. It is more efficient and less ambiguous to store it
once in the DW_TAG_compile_unit.
This should have no effect on DWARF consumers other than LLDB.
Differential Revision: https://reviews.llvm.org/D71732
