Currently when creating tail predicated loops, we need to validate that
all the live-outs of a loop will be equivalent with and without tail
predication, and if they are not we cannot legally create a
tail-predicated loop, leaving expensive vctp and vpst instructions in
the loop. These notably can include register-allocation instructions
like stack loads and stores, and copys lowered from COPYs to MVE_VORRs.
Instead of trying to prove this is valid late in the pipeline, this
patch introduces a MQPRCopy pseudo instruction that COPY is lowered to.
This can then either be converted to a MVE_VORR where possible, or to a
couple of VMOVD instructions if not. This way they do not behave
differently within and outside of tail-predications regions, and we can
know by construction that they are always valid. The idea is that we can
do the same with stack load and stores, converting them to VLDR/VSTR or
VLDM/VSTM where required to prove tail predication is always valid.
This does unfortunately mean inserting multiple VMOVD instructions,
instead of a single MVE_VORR, but my experiments show it to be an
improvement in general.
Differential Revision: https://reviews.llvm.org/D111048
Fix the calculation of ReplacedAllUntiedUses when any of the tied defs
are early-clobber. The effect of this is to fix the placement of kill
flags on an instruction like this (from @f2 in
test/CodeGen/SystemZ/asm-18.ll):
INLINEASM &"stepb $1, $2" [attdialect], $0:[regdef-ec:GRH32Bit], def early-clobber %3:grh32bit, $1:[reguse tiedto:$0], killed %4:grh32bit(tied-def 3), $2:[reguse:GRH32Bit], %4:grh32bit
After TwoAddressInstruction without this patch:
%3:grh32bit = COPY killed %4:grh32bit
INLINEASM &"stepb $1, $2" [attdialect], $0:[regdef-ec:GRH32Bit], def early-clobber %3:grh32bit, $1:[reguse tiedto:$0], %3:grh32bit(tied-def 3), $2:[reguse:GRH32Bit], %4:grh32bit
Note that the COPY kills %4, even though there is a later use of %4 in
the INLINEASM. This fails machine verification if you force it to run
after TwoAddressInstruction (currently it is disabled for other
reasons).
After TwoAddressInstruction with this patch:
%3:grh32bit = COPY %4:grh32bit
INLINEASM &"stepb $1, $2" [attdialect], $0:[regdef-ec:GRH32Bit], def early-clobber %3:grh32bit, $1:[reguse tiedto:$0], %3:grh32bit(tied-def 3), $2:[reguse:GRH32Bit], %4:grh32bit
Differential Revision: https://reviews.llvm.org/D110848
Changes in architecture revision 00eac1:
* Renamed to PSEL.
* Copies whole source register.
* Element type suffix removed from destination.
* Element index no longer optional and '#' prefix has been removed.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-09
Depends on D111212.
Reviewed By: kmclaughlin
Differential Revision: https://reviews.llvm.org/D111213
Changes in architecture revision 00eac1:
* Tile slice index offset no longer prefixed with '#'.
* The syntax for 128-bit (.Q) ZA tile slice accesses must now include
an explicit zero index.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-09
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D111212
This reverts c7f16ab3e3f27d944db72908c9c1b1b7366f5515 / r109694 - which
suggested this was done to improve consistency with the gdb test suite.
Possible that at the time GCC did not canonicalize integer types, and so
matching types was important for cross-compiler validity, or that it was
only a case of over-constrained test cases that printed out/tested the
exact names of integer types.
In any case neither issue seems to exist today based on my limited
testing - both gdb and lldb canonicalize integer types (in a way that
happens to match Clang's preferred naming, incidentally) and so never
print the original text name produced in the DWARF by GCC or Clang.
This canonicalization appears to be in `integer_types_same_name_p` for
GDB and in `TypeSystemClang::GetBasicTypeEnumeration` for lldb.
(I tested this with one translation unit defining 3 variables - `long`,
`long (*)()`, and `int (*)()`, and another translation unit that had
main, and a function that took `long (*)()` as a parameter - then
compiled them with mismatched compilers (either GCC+Clang, or
Clang+(Clang with this patch applied)) and no matter the combination,
despite the debug info for one CU naming the type "long int" and the
other naming it "long", both debuggers printed out the name as "long"
and were able to correctly perform overload resolution and pass the
`long int (*)()` variable to the `long (*)()` function parameter)
Did find one hiccup, identified by the lldb test suite - that CodeView
was relying on these names to map them to builtin types in that format.
So added some handling for that in LLVM. (these could be split out into
separate patches, but seems small enough to not warrant it - will do
that if there ends up needing any reverti/revisiting)
Differential Revision: https://reviews.llvm.org/D110455
When checking to see if we can apply IR flags to a SCEV, we need to identify a bound on the defining scope of the SCEV to be produced. We'd previously added support for a couple SCEVExpr types which trivially imply bounds, but hadn't handled types such as umax where the bounds come from the bounds of the operands. This does the obvious thing, and recurses through operands searching for a tighter bound on the defining scope.
I'm honestly surprised by how little this seems to mater on existing tests, but it's worth doing for completeness sake alone.
Differential Revision: https://reviews.llvm.org/D111191
Without popcnt we had a special case for using the parity flag from a single test i8 test instruction if only bits 7:0 could be non-zero. That special case is still useful when we have popcnt.
To reach this special case, we enable custom lowering of parity for i16/i32/i64 even when popcnt is enabled. The check for POPCNT being enabled is now after the special case in LowerPARITY.
Fixes PR52093
Differential Revision: https://reviews.llvm.org/D111249
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
This does for readability of returns within said function as what we do for the caller side when reasoning about what might be poison.
Differential Revision: https://reviews.llvm.org/D111180
Lowering of byval parameters with sizes that are not represented by a single
store require multiple stores to properly address the correct size of the
parameter.
Sizes that cannot be done with a single store are 3 bytes, 5 bytes, 6 bytes,
7 bytes. It is not correct to simply perform an 8 byte store and for these
elements because then the store would be larger than the element and alias
analysis would assume that this is undefined behaivour and return NoAlias
for them.
This patch adds the correct stores so that the size of the store is not larger
than the size of the element.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D108795
This patch removes a compile time restriction from isSCEVExprNeverPoison. We've strengthened our ability to reason about flags on scopes other than addrecs, and this bailout prevents us from using it. The comment is also suspect as well in that we're in the middle of constructing a SCEV for I. As such, we're going to visit all operands *anyways*.
Differential Revision: https://reviews.llvm.org/D111186
Fix copy+pasta that was checking for smul_fix instead of smul_with_overflow to detected signed values.
The LShr is performed on the extended type as we use it to truncate+extract the upper/hi bits of the extended multiply.
More closely matches the default expansion from TargetLowering::expandMULO
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
Currently the fadd optimizations in InstSimplify don't know how to do this
"X + -0.0 ==> X" fold when using the constrained intrinsics. This adds the
support.
This commit is derived from D106362 with some improvements from D107285.
Differential Revision: https://reviews.llvm.org/D111085
D100244 missed a check on the ResNo of the extract's operand 0 when finding a
pair of extracts to combine into a VMOVRRD (extract(x, n); extract(x, n+1) ->
VMOVRRD(extract x, n/2)). As a result, it can incorrectly pair an extract(x, n)
with another extract(x:3, n+1) for example. This patch fixes the bug by adding
the proper check on ResNo.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D111188
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
BasicAA GEP decomposition currently performs all calculation on the
maximum pointer size, but at least 64-bit, with an option to double
the size. The code comment claims that this improves analysis power
when working with uint64_t indices on 32-bit systems. However, I don't
see how this can be, at least while maintaining correctness:
When working on canonical code, the GEP indices will have GEP index
size. If the original code worked on uint64_t with a 32-bit size_t,
then there will be truncs inserted before use as a GEP index. Linear
expression decomposition does not look through truncs, so this will
be an opaque value as far as GEP decomposition is concerned. Working
on a wider pointer size does not help here (or have any effect at all).
When working on non-canonical code (before first InstCombine), the
GEP indices are implicitly truncated to GEP index size. The BasicAA
code currently just ignores this fact completely, and pretends that
this truncation doesn't happen. This is incorrect and will be
addressed by D110977.
I believe that for correctness reasons, it is important to work on
the actual GEP index size to properly model potential overflow.
BasicAA tries to patch over the fact that it uses the wrong size
(see adjustToPointerSize), but it only does that in limited cases
(only for constant values, and not all of them either). I'd like to
move this code towards always working on the correct size, and
dropping these artificial pointer size adjustments is the first step
towards that.
Differential Revision: https://reviews.llvm.org/D110657
https://alive2.llvm.org/ce/z/QagQMn
This fold is handled by instcombine via SimplifyUsingDistributiveLaws(),
but we are missing the sibliing fold for 'logical and' (implemented with
'select'). Retrofitting the code in instcombine looks much harder
than just adding a small adjustment here, and this is potentially more
efficient and beneficial to other passes.
We need to be better at exposing the comparison predicate to getCmpSelInstrCost calls as some targets (e.g. X86 SSE) have very different costs for different comparisons (PR48337), and we can't always rely on the optional Instruction argument.
This initial commit requires explicit condition type and predicate arguments. The next step will be to review a lot of the existing getCmpSelInstrCost calls which have used BAD_ICMP_PREDICATE even when the predicate is known.
Differential Revision: https://reviews.llvm.org/D111024
This updates a few more check lines, in some mte tests that were close
to auto generated already and some CodeGenPrepare/consthoist tests where
being able to see the entire code sequence is useful for determining
whether code differences are improvements or not.
We already handle more complicated cases like:
extelt (bitcast (inselt poison, X, 0)) --> trunc (lshr X)
But we missed this simpler pattern:
https://alive2.llvm.org/ce/z/D55h64 / https://alive2.llvm.org/ce/z/GKzzRq
This is part of solving:
https://llvm.org/PR52057
I made the transform depend on legal/desirable int type to avoid creating
a shift of an illegal type (for example i128). I'm not sure if that
restriction is actually necessary, but we can change that as a follow-up
if the backend can deal with integer ops on too-wide illegal types.
The pile of AVX512 test changes are all neutral AFAICT - the x86 backend
seems to know how to turn that into the expected "kmov" instructions.
Differential Revision: https://reviews.llvm.org/D111082
This reverts commit d95cd81141a4e398e0d3337cb2e6617281d06278.
Re-land the original patch now that the bug this exposed in selection has been
fixed by 6bc64e24c38a
As suggested on D111024, we should treat getCmpSelInstrCost calls without a specific predicate as matching the worst case predicate cost.
These regressions will be addressed with a mixture of D111024 and fixing other specific getCmpSelInstrCost calls to have realistic predicates.
Seem to cause test failures in compiler-rt.
Revert "[SystemZ] Implement memcmp of variable length with CLC."
This reverts commit 7a4e9a0c73667cb80e4572d41535a9e48f1ed9ef.
Revert "[SystemZ] Implement memcpy of variable length with MVC."
This reverts commit c6c13c58eebda605a9a05f1f13cac1e46407afc7.
We were previously silently generating incorrect code when extracting a
fixed-width vector from a scalable vector. This is worse than crashing,
since the user will have no indication that this is currently unsupported
behaviour. I have fixed the code to only perform DAG combines when safe
to do so, i.e. the input and output vectors are both fixed-width or
both scalable.
Test added here:
CodeGen/AArch64/sve-extract-scalable-vector.ll
Differential revision: https://reviews.llvm.org/D110624
The currently implementation of funcrefs is broken since it is putting
the funcref itself on the stack before the call_indirect. Instead what
should be on the stack is the constant 0, which is the index at which
we store the funcref in __funcref_call_table.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D111152
