This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
(cherry picked from commit fc6b72523f3d73b921690a713e97a433c96066c6)
...and follow ups.
As it has caused test failures on Linux Arm and AArch64:
https://lab.llvm.org/buildbot/#/builders/96/builds/49126https://lab.llvm.org/buildbot/#/builders/17/builds/45824
```
lldb-shell :: Subprocess/clone-follow-child-wp.test
lldb-shell :: Subprocess/fork-follow-child-wp.test
lldb-shell :: Subprocess/vfork-follow-child-wp.test
```
This reverts commit a6c62bf1a4717accc852463b664cd1012237d334,
commit a0a1ff3ab40e347589b4e27d8fd350c600526735 and commit
fc6b72523f3d73b921690a713e97a433c96066c6.
This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
The Watchpoint and Breakpoint objects try to track the hardware index
that was used for them, if they are hardware wp/bp's. The majority of
our debugging goes over the gdb remote serial protocol, and when we set
the watchpoint/breakpoint, there is no (standard) way for the remote
stub to communicate to lldb which hardware index was used. We have an
lldb-extension packet to query the total number of watchpoint registers.
When a watchpoint is hit, there is an lldb extension to the stop reply
packet (documented in lldb-gdb-remote.txt) to describe the watchpoint
including its actual hardware index,
<addr within wp range> <wp hw index> <actual accessed address>
(the third field is specifically needed for MIPS). At this point, if the
stub reported these three fields (the stub is only required to provide
the first), we can know the actual hardware index for this watchpoint.
Breakpoints are worse; there's never any way for us to be notified about
which hardware index was used. Breakpoints got this as a side effect of
inherting from StoppointSite with Watchpoints.
We expose the watchpoint hardware index through "watchpoint list -v" and
through SBWatchpoint::GetHardwareIndex.
With my large watchpoint support, there is no *single* hardware index
that may be used for a watchpoint, it may need multiple resources. Also
I don't see what a user is supposed to do with this information, or an
IDE. Knowing the total number of watchpoint registers on the target, and
knowing how many Watchpoint Resources are currently in use, is helpful.
Knowing how many Watchpoint Resources
a single user-specified watchpoint needed to be implemented is useful.
But knowing which registers were used is an implementation detail and
not available until we hit the watchpoint when using gdb remote serial
protocol.
So given all that, I'm removing watchpoint hardware index numbers. I'm
changing the SB API to always return -1.
This reverts commit a7b78cac9a77e3ef6bbbd8ab1a559891dc693401.
With updates to the tests.
TestWatchTaggedAddress.py: Updated the expected watchpoint types,
though I'm not sure there should be a differnt default for the two
ways of setting them, that needs to be confirmed.
TestStepOverWatchpoint.py: Skipped this everywhere because I think
what used to happen is you couldn't put 2 watchpoints on the same
address (after alignment). I guess that this is now allowed because
modify watchpoints aren't accounted for, but likely should be.
Needs investigating.
This reverts commit 933ad5c897ee366759a54869b35b2d7285a92137.
This caused 1 test failure and an unexpected pass on AArch64 Linux:
https://lab.llvm.org/buildbot/#/builders/96/builds/45765
Wasn't reported because the bot was already red at the time.
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
Re-landing this patch after addressing testsuite failures found in CI on
Linux, Intel machines, and windows.
rdar://108234227
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
rdar://108234227
Reading through the Watchpoint class, I found this method
that wasn't being used properly, and a couple of ivars that
weren't used at all. Cleanup.
Differential Revision: https://reviews.llvm.org/D155768
This is a user facing action, it is meant to focus the user's attention on
something other than the 0th frame when you stop somewhere where that's
helpful. For instance, stopping in pthread_kill after an assert will select
the assert frame.
This is not something you want to have happen internally in lldb, both
because internally you really don't want the selected frame changing out
from under you, and because the recognizers can do arbitrary work, and that
can cause deadlocks or other unexpected behavior.
However, it's not something that the current code does
explicitly after a stop has been delivered, it's expected to happen implicitly
as part of stopping. I changing this to call SMRF explicitly after a user
stop, but that got pretty ugly quickly.
So I added a bool to control whether to run this and audited all the current
uses to determine whether we're returning to the user or not.
Differential Revision: https://reviews.llvm.org/D148863
Watchpoints from lldb-server are sent in the stop info packet
as a `reason:watchpoint` and `description:asciihex` keys; the
latter's asciihex has one to three integer values. This patch
documents the purpose of those three different numbers, and
clarifies the behavior on MIPS with the third number which is
outside the range of any watched memory range means to silently
skip the watchpoint.
lldb was previously using this silently skip watchpoint behavior
for AArch64 as well, but in the case of AArch64 we see a watchpoint
address outside of a watched memory range when the write BEGINS
before the watched memory range, but extends in to it. We don't
want to silently skip these.
Differential Revision: https://reviews.llvm.org/D147816
rdar://83996471
We were checking "WasTheLastResumeForUserExpression" but that returns true even
if that expression was completed, provided we haven't run again. This uses a
better check.
This is actually fairly hard to trigger. It happens the first time you hit an
objc_exception_throw breakpoint and invoke that frame recognizer for that. But
I couldn't trigger it using a Python based frame recognizer. So I wrote a test
for the objc_exception_throw_breakpoint recognizer which should have been there
anyway... It fails (the target auto-continues) w/o this patch and succeeds with
it.
Differential Revision: https://reviews.llvm.org/D147587
Previously we only looked at the si_signo field, so you got:
```
(lldb) bt
* thread #1, name = 'a.out.mte', stop reason = signal SIGSEGV
* frame #0: 0x00000000004007f4
```
This patch adds si_code so we can show:
```
(lldb) bt
* thread #1, name = 'a.out.mte', stop reason = signal SIGSEGV: sync tag check fault
* frame #0: 0x00000000004007f4
```
The order of errno and code was incorrect in ElfLinuxSigInfo::Parse.
It was the order that a "swapped" siginfo arch would use, which for Linux,
is only MIPS. We removed MIPS Linux support some time ago.
See:
fe15c26ee2/include/uapi/asm-generic/siginfo.h (L121)
A test is added using memory tagging faults. Which were the original
motivation for the changes.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D146045
This reverts commit 8d024a79ea783ed3fbb5691aeaf186ad3f0a4ae9.
I accidentally included some "in progress" work that wasn't supposed to
go with this commit.
We need to step the watchpoint instruction in these cases, but the
when we queued the ThreadPlanStepOverWatchpoint to do this, we didn't
make it a Controlling plan. So if you are stepping, this plan returns as
though it were a utility plan, and the stepping plan keeps going.
This only partially fixes the problem on Darwin; there's another bug
with reporting a watchpoint when we're instruction single stepping over
an instruction that triggers a watchpoint. The kernel reports the
"single step completed" but not the watchpoint hit. So this commit
also refactors the test into a part that works (at least on Darwin) and
a part that still fails.
We may have to adjust the test result expectations for other systems after
this fix.
Differential Revision: https://reviews.llvm.org/D146337
lldb was originally designed to get the watchpoint exception behavior
from the gdb remote serial protocol stub -- exceptions are either
received before the instruction executes, or after the instruction
has executed. This behavior was reported via two lldb extensions
to gdb RSP, so generic remote stubs like gdbserver or a JTAG stub,
would not tell lldb which behavior was correct, and it would default
to "exceptions are received after the instruction has executed".
Two architectures hard coded their correct "exceptions before
instruction" behavior, to work around this issue.
Most architectures have a fixed behavior of watchpoint exceptions,
and we can center that information in lldb. We can allow a remote
stub to override the default behavior via our packet extensions
if it's needed on a specific target.
This patch also separates the fetching of the number of watchpoints
from whether exceptions are before/after the insn. Currently if
lldb couldn't fetch the number of watchpoints (not really needed), it
also wouldn't get when exceptions are received, and watchpoint
handling would fail. lldb doesn't actually use the number of
watchpoints for anything beyond printing it to the user.
Differential Revision: https://reviews.llvm.org/D143215
rdar://101426626
Currently in some cases lldb reports stop reason as "step out" or "step over" (from thread plan completion) instead of "breakpoint", if the user breakpoint happens to be set on the same address.
The part of f08f5c9926 seems to overwrite internal breakpoint detection logic, so that only the last breakpoint for the current stop address is considered.
Together with step-out plans not clearing its breakpoint until they are destrouyed, this creates a situation when there is a user breakpoint set for address, but internal breakpoint makes lldb report a plan completion stop reason instead of breakpoint.
This patch reverts that internal breakpoint detection logic to consider all breakpoints
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D140368
The synchronous callbacks are not intended to start the target running
during the callback, and doing so is flakey. This patch converts them
to being regular async callbacks, and adds some testing for sequential
reports that have caused problems in the field.
Differential Revision: https://reviews.llvm.org/D134927
This commit combines the initial commit (7c240de609af), a fix for x86_64 Linux
(3a0581501e76) and a fix for thinko in a last minute rewrite that I really
should have run the testsuite on.
Also, make sure that all the "I need to step over watchpoint" plans execute
before we call a public stop. Otherwise, e.g. if you have N watchpoints and
a Signal, the signal stop info will get us to stop with the watchpoints in a
half-done state.
Differential Revision: https://reviews.llvm.org/D130674
This reverts commit 5778ada8e54edb2bc2869505b88a959d1915c02f.
The watchpoint tests all stall on aarch64-ubuntu bots. Reverting till I can
get my hands on an system to test this out.
This reverts commit 555ae5b8f5aa93ab090af853a8b7a83f815b3f20.
Apparently, there's something different about how Linux ARM handles watchpoints,
as all the watchpoint tests seem to stall on the Ubuntu aarch64 bots.
Reverting till I can get my hands on a linux system and see what is
wrong.
That was causing hit counts to be double-counted on x86_64 Linux.
It looks like StopInfoWatchpoint::ShouldStopSynchronous gets called
twice for a give stop on Linux (not on Darwin). I had taken out the
"have I been called already" check when I reworked this part of the
code because it didn't seem necessary. Putting that back in because
it looks like it is on some systems.
Since we want to present the "new & old" values for watchpoint hits, on architectures,
including the ARM family, that stop before the triggering instruction is run, we need
to single step over the instruction before stopping for realz. This was incorrectly
done directly in the StopInfoWatchpoint::ShouldStop. That causes problems if more than
one thread stops "for a reason" at the same time as the watchpoint, since the other actions
didn't expect the process to make progress in this part of the execution control machinery.
The correct way to do this is to schedule the step over using ThreadPlans, and then to restore
the stop info after that plan stops, so that the rest of the stop info actions can happen when
all the other threads have handled their immediate actions as well.
Differential Revision: https://reviews.llvm.org/D129814
not to be hit. But another thread might be hit at the same time and
actually stop. So we have to be sure to switch the first thread's
stop info to eStopReasonNone or we'll report a hit when the condition
failed, which is confusing.
Differential Revision: https://reviews.llvm.org/D128776
When we hit a breakpoint site all of whose owners are internal, we don't
broadcast that event to the public event queue. However, we were checking
whether that was true in the ShouldNotify method, which gets run after the
breakpoint callbacks get run. If the breakpoint callback deletes the site
we just hit, we no longer have the information to make that determination.
This patch just gathers the "was all internal" fact when the StopInfoBreakpoint
gets made, which happens before anyone has a chance to delete the site, and then
uses that cached value.
This bug was causing a couple of tests (including TestStopAtEntry.py) to fail
when using new the macOS Ventura dyld support.
Differential Revision: https://reviews.llvm.org/D127997
Migrate to using ReportError to report a failure to evaluate a
watchpoint condition. I had already done so for the parallel code for
breakpoints.
In the process, I noticed that I accidentally regressed the error
reporting for breakpoint conditions by dropping the call to
GetDescription. This patch rectifies that and adds a test.
Because the call to GetDescription expects a Stream*, I also switches
from using a raw_string_ostream to a StreamString for both breakpoints
and watchpoints.
Report warnings and errors through events instead of printing directly
the to the debugger's error stream. By using events, IDEs such as Xcode
can report these issues in the UI instead of having them show up in the
debugger console.
The new diagnostic events are handled by the default event loop. If a
diagnostic is reported while nobody is listening for the new event
types, it is printed directly to the debugger's error stream.
Differential revision: https://reviews.llvm.org/D121511
Applied modernize-use-default-member-init clang-tidy check over LLDB.
It appears in many files we had already switched to in class member init but
never updated the constructors to reflect that. This check is already present in
the lldb/.clang-tidy config.
Differential Revision: https://reviews.llvm.org/D121481
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
[NFC] As part of using inclusive language within the llvm project, this patch
renames master plan to controlling plan in lldb.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D113019
Android and other platforms make wide use of signals when running applications and this can slow down debug sessions. Tracking this statistic can help us to determine why a debug session is slow.
The new data appears inside each target object and reports the signal hit counts:
"signals": [
{
"SIGSTOP": 1
},
{
"SIGUSR1": 1
}
],
Differential Revision: https://reviews.llvm.org/D112683
Add a support for handling fork/vfork stops in LLGS client. At this
point, it only sends a detach packet for the newly forked child
(and implicitly resumes the parent).
Differential Revision: https://reviews.llvm.org/D100206
This is an NFC cleanup.
Many of the API's that returned BreakpointOptions always returned valid ones.
Internally the BreakpointLocations usually have null BreakpointOptions, since they
use their owner's options until an option is set specifically on the location.
So the original code used pointers & unique_ptr everywhere for consistency.
But that made the code hard to reason about from the outside.
This patch changes the code so that everywhere an API is guaranteed to
return a non-null BreakpointOption, it returns it as a reference to make
that clear.
It also changes the Breakpoint to hold a BreakpointOption
member where it previously had a UP. Since we were always filling the UP
in the Breakpoint constructor, having the UP wasn't helping anything.
Differential Revision: https://reviews.llvm.org/D104162
Previously ignore counts were checked when we stopped to do the sync callback in Breakpoint::ShouldStop. That meant we would do all the ignore count work even when
there is also a condition says the breakpoint should not stop.
That's wrong, lldb treats breakpoint hits that fail the thread or condition checks as "not having hit the breakpoint". So the ignore count check should happen after
the condition and thread checks in StopInfoBreakpoint::PerformAction.
The one side-effect of doing this is that if you have a breakpoint with a synchronous callback, it will run the synchronous callback before checking the ignore count.
That is probably a good thing, since this was already true of the condition and thread checks, so this removes an odd asymmetry. And breakpoints with sync callbacks
are all internal lldb breakpoints and there's not a really good reason why you would want one of these to use an ignore count (but not a condition or thread check...)
Differential Revision https://reviews.llvm.org/D103217
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
The StopInfoBreakpoint::PerformAction was overriding the synchronous
breakpoint's ShouldStop report. Fix that and add a test.
This fixes two bugs in the original submission:
1) Actually generate both dylibs by including the second one in the Makefile
2) Don't ask synchronous callbacks for their opinion on whether to stop
in the async context, that info is taken care of by recording the m_should_stop
on entry to PerformAction.
Differential Revision: https://reviews.llvm.org/D98914
This reverts commit 9406d43138811ac4dfd0ab31434f65a649bc882e.
I messed up a test, and when I got it right it was failing. The changed logic
doesn't work quite right (now the async callback called at sync time is
forcing us to stop. I need to be a little more careful about that.
We weren't taking into account the "m_should_stop" setting that the
synchronous breakpoint callback had already set when we did PerformAction
in the StopInfoBreakpoint. So we didn't obey its instructions when it
told us to stop. Fixed that and added some tests both for when we
just have the setting, and when we have the setting AND other breakpoints
at the shared library load notification breakpoint address.
Differential Revision: https://reviews.llvm.org/D98914
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
There was a little bit of logic in the StopInfoBreakpoint::PerformAction
that would null out the StopInfo once we had a completed plan so that the
next call to GetStopInfo would replace it with the StopInfoThreadPlan.
But the stop-hooks check for whether a thread stopped for a reason didn't
trigger this conversion. So I added an API to do that directly, and then
called it where before we just reset the StopInfo.
<rdar://problem/54270767>
Differential Revision: https://reviews.llvm.org/D66241
llvm-svn: 369052
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
