Implement the simpler vRun packet and prefer it over the A packet.
Unlike the latter, it tranmits command-line arguments without redundant
indices and lengths. This also improves GDB compatibility since modern
versions of gdbserver do not implement the A packet at all.
Make qLaunchSuccess not obligatory when using vRun. It is not
implemented by gdbserver, and since vRun returns the stop reason,
we can assume it to be successful.
Differential Revision: https://reviews.llvm.org/D107931
Add a GDB-compatible fallback to vFile:fstat for vFile:mode, and to
vFile:open for vFile:exists. Note that this is only partial fallback,
as it fails if the file cannot be opened.
Differential Revision: https://reviews.llvm.org/D107811
Add two new commands 'platform get-file-permissions' and 'platform
file-exists' for the respective bits of LLDB protocol. Add tests for
them. Fix error handling in GetFilePermissions().
Differential Revision: https://reviews.llvm.org/D107809
Create a common GDBPlatformClientTestBase class and move the platform
select/connect logic there to reduce duplication.
Differential Revision: https://reviews.llvm.org/D109585
Implement a fallback to getting the file size via vFile:stat packet
when the remote server does not implement vFile:size. This makes it
possible to query file sizes from remote gdbserver.
Note that unlike vFile:size, the fallback will not work if the server is
unable to open the file.
While at it, add a few tests for the 'platform get-size' command.
Differential Revision: https://reviews.llvm.org/D107780
Remove File::eOpenOptionAppend from the mode used by 'platform file
open' command. According to POSIX, O_APPEND causes all successive
writes to be done at the end of the file. This effectively makes
the offset argument to 'platform file write' meaningless.
Furthermore, apparently O_APPEND is not implemented reliably everywhere.
The Linux manpage for pwrite(2) suggests that Linux does respect
O_APPEND there while according to POSIX it should not, so the actual
behavior would be dependent on how the vFile:pwrite packet is
implemented on the server.
Ideally, the mode used for opening flags would be provided via options.
However, changing the default mode seems to be a reasonable intermediate
solution.
Differential Revision: https://reviews.llvm.org/D107664
Fix 'platform file read' and 'platform file write' commands to correctly
detect erraneous return and report it as such. Currently, errors were
implicitly printed as a return value of -1, and the commands were
assumed to be successful.
Differential Revision: https://reviews.llvm.org/D107665
Extend PluginManager::SaveCore() to support saving core dumps
via Process plugins. Implement the client-side part of qSaveCore
request in the gdb-remote plugin, that creates the core dump
on the remote host and then uses vFile packets to transfer it.
Differential Revision: https://reviews.llvm.org/D101329
This change adds save-core functionality into the ObjectFileELF that enables
saving minidump of a stopped process. This change is mainly targeting Linux
running on x86_64 machines. Minidump should contain basic information needed
to examine state of threads, local variables and stack traces. Full support
for other platforms is not so far implemented. API tests are using LLDB's
MinidumpParser.
This relands commit aafa05e, reverted in 1f986f6.
Failed tests were fixed.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D108233
Remove software breakpoints from forked processes in order to restore
the original program code before detaching it.
Differential Revision: https://reviews.llvm.org/D100263
This change adds save-core functionality into the ObjectFileELF that enables
saving minidump of a stopped process. This change is mainly targeting Linux
running on x86_64 machines. Minidump should contain basic information needed
to examine state of threads, local variables and stack traces. Full support
for other platforms is not so far implemented. API tests are using LLDB's
MinidumpParser.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D108233
Add a support for handling fork/vfork stops in LLGS client. At this
point, it only sends a detach packet for the newly forked child
(and implicitly resumes the parent).
Differential Revision: https://reviews.llvm.org/D100206
LLDB is using LLVM's target-specific disassembler which is only available when
the respective LLVM target has been enabled in the build config.
This patch just skips the test if there is no arm64 target (and its
disassembler) available in the current build config.
Reviewed By: jasonmolenda
Differential Revision: https://reviews.llvm.org/D108145
On aarch64 a two instruction sequence is used to calculate a
pc-relative address, add some state to the DisassemblerLLVMC
symbolicator so it can track the necessary data across the
two instructions and compute the address being calculated.
Differential Revision: https://reviews.llvm.org/D107213
rdar://49119253
Use hexadecimal numbers rather than decimal in various vFile packets
in order to fix compatibility with gdbserver. This also changes the few
custom LLDB packets -- while technically they do not have to be changed,
it is easier to use the same syntax consistently across LLDB.
Differential Revision: https://reviews.llvm.org/D107475
Sync the mode constants used to drive vFile:open requests with these
used by GDB and defined for the gdb remote protocol. This makes it
possible to use 'platform file open' after connecting to gdbremote
server (and to some degree to operate on the open file modulo other
incompatibilities).
Differential Revision: https://reviews.llvm.org/D106985
Upstream support for NSConstantArray, NSConstantIntegerNumber,
NSConstant{Float,Double}Number and NSConstantDictionary.
We would've upstreamed this earlier but testing it requires
-fno-constant-nsnumber-literals, -fno-constant-nsarray-literals and
-fno-constant-nsdictionary-literals which haven't been upstreamed yet.
As a temporary workaround use the system compiler (xcrun clang) for the
constant variant of the tests.
I'm just upstreaming this. The patch and the tests were all authored by
Fred Riss.
Differential revision: https://reviews.llvm.org/D107660
This reverts commit 34d78b6a6755946e547afc47d38b59b6a2854457.
This breaks build bots witha missing file:
/home/worker/2.0.1/lldb-x86_64-debian/llvm-project/lldb/source/Plugins/Language/ObjC/Cocoa.cpp:10:10: fatal error: 'objc/runtime.h' file not found
Upstream support for NSConstantArray, NSConstantIntegerNumber,
NSConstant{Float,Double}Number and NSConstantDictionary.
We would've upstreamed this earlier but testing it requires
-fno-constant-nsnumber-literals, -fno-constant-nsarray-literals and
-fno-constant-nsdictionary-literals which haven't been upstreamed yet.
As a temporary workaround use the system compiler (xcrun clang) for the
constant variant of the tests.
I'm just upstreaming this. The patch and the tests were all authored by
Fred Riss.
Differential revision: https://reviews.llvm.org/D107660
This provides a convenient way to limit a breakpoint
to the current thread when setting it from the command line w/o
having to figure out what the current thread is.
Differential Revision: https://reviews.llvm.org/D107015
Following LLDB tests fail randomly on LLDB Arm/AArch64 Linux buildbots.
We still not have a reliable solution for these tests to pass
consistently. I am marking them skipped for now.
TestBreakpointCallbackCommandSource.py
TestIOHandlerResize.py
TestEditline.py
TestGuiViewLarge.py
TestGuiExpandThreadsTree.py
TestGuiBreakpoints.py
https://reviews.llvm.org/D45592 added a nice feature to be able to specify a breakpoint by a relative path. E.g. passing foo.cpp or bar/foo.cpp or zaz/bar/foo.cpp is fine. However, https://reviews.llvm.org/D68671 by mistake disabled the test that ensured this functionality works. With time, someone made a small mistake and fully broke the functionality.
So, I'm making a very simple fix and the test passes.
Differential Revision: https://reviews.llvm.org/D107126
This adds a new command for writing memory tags.
It is based on the existing "memory write" command.
Syntax: memory tag write <address-expression> <value> [<value> [...]]
(where "value" is a tag value)
(lldb) memory tag write mte_buf 1 2
(lldb) memory tag read mte_buf mte_buf+32
Logical tag: 0x0
Allocation tags:
[0xfffff7ff9000, 0xfffff7ff9010): 0x1
[0xfffff7ff9010, 0xfffff7ff9020): 0x2
The range you are writing to will be calculated by
aligning the address down to a granule boundary then
adding as many granules as there are tags.
(a repeating mode with an end address will be in a follow
up patch)
This is why "memory tag write" uses MakeTaggedRange but has
some extra steps to get this specific behaviour.
The command does all the usual argument validation:
* Address must evaluate
* You must supply at least one tag value
(though lldb-server would just treat that as a nop anyway)
* Those tag values must be valid for your tagging scheme
(e.g. for MTE the value must be > 0 and < 0xf)
* The calculated range must be memory tagged
That last error will show you the final range, not just
the start address you gave the command.
(lldb) memory tag write mte_buf_2+page_size-16 6
(lldb) memory tag write mte_buf_2+page_size-16 6 7
error: Address range 0xfffff7ffaff0:0xfffff7ffb010 is not in a memory tagged region
(note that we do not check if the region is writeable
since lldb can write to it anyway)
The read and write tag tests have been merged into
a single set of "tag access" tests as their test programs would
have been almost identical.
(also I have renamed some of the buffers to better
show what each one is used for)
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105182
The code that figured out which breakpoints to delete was supposed
to set the result status if it found breakpoints, and then the code
that actually deleted them checked that the result's status was set.
The code for "break delete --disabled" failed to set the status if
no "protected" breakpoints were provided. This was a confusing way
to implement this, so I reworked it with early returns so it was less
error prone, and added a test case for the no arguments case.
Differential Revision: https://reviews.llvm.org/D106623
The test I added in commit 078003482e90ff5c7ba047a3d3152f0b0c392b31 was using
SIGINT for testing the tab completion. The idea is to have a signal that only
has one possible completion and I ended up picking SIGIN -> SIGINT for the test.
However on non-Linux systems there is SIGINFO which is a valid completion for
`SIGIN' and so the test fails there.
This replaces SIGIN -> SIGINT with SIGPIP -> SIGPIPE completion which according
to LLDB's signal list in Host.cpp is the only valid completion.
This patch introduces Scripted Processes to lldb.
The goal, here, is to be able to attach in the debugger to fake processes
that are backed by script files (in Python, Lua, Swift, etc ...) and
inspect them statically.
Scripted Processes can be used in cooperative multithreading environments
like the XNU Kernel or other real-time operating systems, but it can
also help us improve the debugger testing infrastructure by writting
synthetic tests that simulates hard-to-reproduce process/thread states.
Although ScriptedProcess is not feature-complete at the moment, it has
basic execution capabilities and will improve in the following patches.
rdar://65508855
Differential Revision: https://reviews.llvm.org/D100384
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
`CompletionRequest::AddCompletion` adds the given string as completion of the
current command token. `CompletionRequest::TryCompleteCurrentArg` only adds it
if the current token is a prefix of the given string. We're using
`AddCompletion` for the `process signal` handler which means that `process
signal SIGIN` doesn't get uniquely completed to `process signal SIGINT` as we
unconditionally add all other signals (such as `SIGABRT`) as possible
completions.
By using `TryCompleteCurrentArg` we actually do the proper filtering which will
only add `SIGINT` (as that's the only signal with the prefix 'SIGIN' in the
example above).
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D105028
Remove the DarwinLog and qStructuredDataPlugins support
from debugserver. The DarwinLog plugin was never debugged
fully and made reliable, and the underlying private APIs
it uses have migrated since 2016 so none of them exist
any longer.
Differential Revision: https://reviews.llvm.org/D106324
rdar://75073283
This reverts commit 82a38837150099288a1262391ef43e1fd69ffde4.
The original version had a copy-paste error: using the Interrupt timeout
for the ResumeSynchronous wait, which is clearly wrong. This error would
have been evident with real use, but the interrupt is long enough that it
only caused one testsuite failure (in the Swift fork).
Anyway, I found that mistake and fixed it and checked all the other places
where I had to plumb through a timeout, and added a test with a short
interrupt timeout stepping over a function that takes 3x the interrupt timeout
to complete, so that should detect a similar mistake in the future.
This patch adds a helper function to test target architecture is
AArch64 or not. This also tightens isAArch64* helpers by adding an
extra architecture check.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D105483
This was an oversight of the commit: bb93483c119b92c1ec2b7a58505e21b9dce6a333 that
added support for the Frozen variants. Also added a test case for the way that
currently produces one of these variants (a copy).
This corrects the test added in
31f9960c38529ce805edf9764535eb0ce188cadf
and temporarily patched in
3b4aad1186e8e8e6f6c7887cb5e8d9bfd7d3ce2f.
This test checks that the memory tag read
command errors when you use it on a platform
without memory tagging.
(which is why we skip the test if you actually
have MTE)
The problem with this test is that there's
two levels of unsupported each with it's own
specific error.
On anything that isn't AArch64, there's no
tagging extension we support. So you're told
that that is the case. As in "this won't ever work".
When you're on AArch64 we know that MTE could
be present on the remote and when we find that it
isn't, we tell you that instead.
Expect a different error message on AArch64 to fix
the test.
TestAArch64UnwindPAC.py started failing on LLDB buildbot as underlying
hardware does not support PAC. This patch skips this test for targets
which do not support PAC feature.
This new command looks much like "memory read"
and mirrors its basic behaviour.
(lldb) memory tag read new_buf_ptr new_buf_ptr+32
Logical tag: 0x9
Allocation tags:
[0x900fffff7ffa000, 0x900fffff7ffa010): 0x9
[0x900fffff7ffa010, 0x900fffff7ffa020): 0x0
Important proprties:
* The end address is optional and defaults to reading
1 tag if ommitted
* It is an error to try to read tags if the architecture
or process doesn't support it, or if the range asked
for is not tagged.
* It is an error to read an inverted range (end < begin)
(logical tags are removed for this check so you can
pass tagged addresses here)
* The range will be expanded to fit the tagging granule,
so you can get more tags than simply (end-begin)/granule size.
Whatever you get back will always cover the original range.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97285
TestExitDuringExpression test_exit_before_one_thread_no_unwind fails
sporadically on both Arm and AArch64 linux buildbots. This seems like
manifesting itself on a fully loaded machine. I have not found a reliable
timeout value so marking it skip for now.
Those tests are all failing for older Clang versions. This is adding the
respective test decorators for the passing Clang versions to get the recently
revived matrix bot green.
