This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
Specifying relocation fixup constants with name and type facilitates
readability and compile-time checks. The `FixupInfo<EdgeKind>` facade
organizes the information into entries per relocation type and provides
uniform access across Arm and Thumb relocations. Since it uses template
specializations, it doesn't limit potential entries. We cannot access
the entries dynamically though, because `EdgeKind` must be given as a
compile-time constant.
With this patch we populate a static lookup table on-demand and use it
for dynamic access in opcode-checks.
Reading implicit addend from a relocation site doesn't require a complete
`LinkGraph` edge. The operation is independent from `TargetSymbol`,
but constructing an `Edge` instance required one. This patch fixes the
inconsistency and simplifies some setup code from the error unittests.
Furthermore this patch prepares for the `Arm`/`Thumb`/`Data` helper
functions to be turned into implementation details. Exposing them in the
API causes unfortunate inconsistencies that we don't want to error-check
all the time, e.g. passing `Thumb_Call` to `readAddendArm()`.
Support for ELF::R_ARM_THM_MOVW_PREL_NC and ELF::R_ARM_THM_MOVT_PREL
is added. Move instructions with PC-relative immediates can be handled
in Thumb mode with this addition.
The pass only requires that it can determine a uniquely identified
target at some offsets. Multiple relocations at the same offset are fine
otherwise and will be required when adding exception handling support
for RISC-V.
These files satisfy all of the following:
- misc-include-cleaner indicates that these files do not need
Endian.h.
- They do not mention "endian" anywhere.
- They do not include any *.inc or *.def, which could need
llvm::support::endian.
Note that llvm::support::endianness has been renamed to
llvm::endianness while becoming an enum class. This patch replaces
{big,little,native} with llvm::endianness::{big,little,native}.
This patch completes the migration to llvm::endianness and
llvm::endianness::{big,little,native}. I'll post a separate patch to
remove the migration helpers in llvm/Support/Endian.h:
using endianness = llvm::endianness;
constexpr llvm::endianness big = llvm::endianness::big;
constexpr llvm::endianness little = llvm::endianness::little;
constexpr llvm::endianness native = llvm::endianness::native;
Note that llvm::support::endianness has been renamed to
llvm::endianness while becoming an enum class as opposed to an
enum. This patch replaces support::{big,little,native} with
llvm::endianness::{big,little,native}.
Now that llvm::support::endianness has been renamed to
llvm::endianness, we can use the shorter form. This patch replaces
support::endianness with llvm::endianness.
Now that llvm::support::endianness has been renamed to
llvm::endianness, we can use the shorter form. This patch replaces
support::endianness::{big,little,native} with
llvm::endianness::{big,little,native}.
This restores the pre-b9383a86b8f behavior. Most platforms / compilers don't
add relocations for CIEs, however they're not prohibited and we want objects
that contain them to remain loadable.
* Remove unused variable.
* Error on existing edge at CIE pointer field.
* Simplify CFI processing in `EHFrameEdgeFixer`: The code expects
`DWARFRecordSectionSplitter` to split each CFI record into its own
block, so remove loop over possibly multiple entries in one block.
We should eventually migrate llvm::support::endianness to std::endian
when C++20 is available for the codebase.
This patch prepares our codebase for that future by removing the
assumption that native is a unique value different from both big and
little. Note that in C++20, native is equal to either big or little
on typical machines, where the endianness is the same for all scalar
types.
The *Policy suffix came from the earlier MemAllocPolicy type, where it was
included to distinguish the type from a memory-allocation operation.
MemLifetime is a noun already, so the *Policy suffix is just dead weight now.
Add support for static Arm relocations of R_ARM_MOVT_ABS and R_ARM_MOVW_ABS_NC
which are emitted by movt and movw instructions. The implementation contains
relocation fixup and its testing as well as its encode/decode functions for
reading and writing immediate values together with its unittests.
There is case that R_PPC64_REL24 with non-zero addend. The assertion is incorrectly triggered in such situation.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D158708
We don't have to set or clear the Thumb bit in relocation fixup values.
It's not part of the branch range and the respective encoding functions
like encodeImmBT4BlT1BlxT2() shift out the least significant bit anyway.
This was a leftover from the initial patch before we switched to store
Thumb state in target-flags with D146641.
- Added WritableArmRelocation and ArmRelocation Structs
- Encode/Decode funcs for B/BL A1 and BLX A2 encodings
- Add ARM helper functions, consistent with the existing Thumb helper functions
- Add Test for ELF::R_ARM_CALL
Reviewed By: sgraenitz
Differential Revision: https://reviews.llvm.org/D157533
This re-applies 4b17c81d5a5, "[jitlink/rtdydl][checker] Add TargetFlag
dependent disassembler switching support", which was reverted in
4871a9ca546 due to bot failures.
The patch has been updated to add missing plumbing for Subtarget Features and
a CPU string, which should fix the failing tests.
https://reviews.llvm.org/D158280
Some targets such as AArch32 make use of TargetFlags to indicate ISA mode. Depending
on the TargetFlag, MCDisassembler and similar target specific objects should be
reinitialized with the correct Target Triple. Backends with similar needs can
easily extend this implementation for their usecase.
The drivers llvm-rtdyld and llvm-jitlink have their SymbolInfo's extended to take
TargetFlag into account. RuntimeDyldChecker can now create necessary TargetInfo
to reinitialize MCDisassembler and MCInstPrinter. The required triple is obtained
from the new getTripleFromTargetFlag function by checking the TargetFlag.
In addition, breaking changes for RuntimeDyld COFF Thumb tests are fixed by making
the backend emit a TargetFlag.
Reviewed By: lhames, sgraenitz
Differential Revision: https://reviews.llvm.org/D158280
We now check for:
1. Duplicate definitions of the same section name with different permissions.
2. Symbols whose size extends past the end of the containing block.
It's not clear to me whether either of these is strictly prohibited by the ELF
spec, but they seem pathalogical and JITLink doesn't currently handle them. For
now we'll make them recoverable errors so that if we do encounter these in the
wild we can report the issue(s).
The LinkGraph that is passed into the ELFJITLinker_x86_64 constructor is handed
off to the JITLinker base class, so can't be used in the constructor body. This
commit adds a getGraph method to JITLinker, and updates ELFJITLinker_x86_64 to
use that.
This allows JITLinkerBase implementations to check whether default passes
should be added. The ELF_x86_64 backend is updated to check this predicate
before installing the getOrCreateGOTSymbol pass.
This is an alternative solution to https://reviews.llvm.org/D158909.
This reverts commit 4e3b89483a6922d3f48670bb1c50a37f342918c6, with
fixes for places I'd missed updating in lld and lldb. I've also
renamed OptionVisibility::Default to "DefaultVis" to avoid ambiguity
since the undecorated name has to be available anywhere Options.inc is
included.
Original message follows:
This splits OptTable's "Flags" field into "Flags" and "Visibility",
updates the places where we instantiate Option tables, and adds
variants of the OptTable APIs that use Visibility mask instead of
Include/Exclude flags.
We need to do this to clean up a bunch of complexity in the clang
driver's option handling - there's a whole slew of flags like
CoreOption, NoDriverOption, and FlangOnlyOption there today to try to
handle all of the permutations of flags that the various drivers need,
but it really doesn't scale well, as can be seen by things like the
somewhat recently introduced CLDXCOption.
Instead, we'll provide an additive model for visibility that's
separate from the other flags. For things like "HelpHidden", which is
used as a "subtractive" modifier for option visibility, we leave that
in "Flags" and handle it as a special case.
Note that we don't actually update the users of the Include/Exclude
APIs here or change the flags that exist in clang at all - that will
come in a follow up that refactors clang's Options.td to use the
increased flexibility this change allows.
Differential Revision: https://reviews.llvm.org/D157149
This splits OptTable's "Flags" field into "Flags" and "Visibility",
updates the places where we instantiate Option tables, and adds
variants of the OptTable APIs that use Visibility mask instead of
Include/Exclude flags.
We need to do this to clean up a bunch of complexity in the clang
driver's option handling - there's a whole slew of flags like
CoreOption, NoDriverOption, and FlangOnlyOption there today to try to
handle all of the permutations of flags that the various drivers need,
but it really doesn't scale well, as can be seen by things like the
somewhat recently introduced CLDXCOption.
Instead, we'll provide an additive model for visibility that's
separate from the other flags. For things like "HelpHidden", which is
used as a "subtractive" modifier for option visibility, we leave that
in "Flags" and handle it as a special case.
Note that we don't actually update the users of the Include/Exclude
APIs here or change the flags that exist in clang at all - that will
come in a follow up that refactors clang's Options.td to use the
increased flexibility this change allows.
Differential Revision: https://reviews.llvm.org/D157149
RuntimeDyld has implemented more relocations than JITLink for ppc64. This patch adds relocations missing from JITLink for ppc64.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D157366
Creating stubs in JITLink require creating architecture-specific edges. In order to allow user to create stubs in cross-architecture manner, this patch exposes these stub creations functions by returning "stub creators" for given triple.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D155557
All command-line tools using `llvm::opt` create an enum of option IDs and a table of `OptTable::Info` object. Most of the tools use the same ID (`OPT_##ID`), kind (`Option::KIND##Class`), group ID (`OPT_##GROUP`) and alias ID (`OPT_##ALIAS`). This patch extracts that common code into canonical macros. This results in fewer changes when tweaking the `OPTION` macros emitted by the TableGen backend.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D157028
Since jitlink for ppc64le is ready for general use, test cases in compiler-rt for ELFNixPlatform support can be enabled.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D156399
If JITLinkGeneric::linkPhase2 receives an Error rather than an InFlightAlloc
then we need to call JITLinkContext::notifyFailed, rather than calling
abandonAllocAndBailOut -- the latter asserts that there is an allocation to
abandon, and this was turning allocation errors into assertion failures in
debug mode.
After PrePrunePass `claimOrExternalizeWeakAndCommonSymbols`, a defined symbol might become external. So determine a function call is external or not when building the linkgraph is not accurate. This largely affects updating TOC pointer on PowerPC. TOC pointer is supposed to be the same in one object file(if no mulitple TOC appears) and is updated when control flow transferred to another object file.
This patch defers checking a function call is external or not, in `buildTables_ELF_ppc64` which is a PostPrunePass.
This patch fixes failures when `jitlink -orc-runtime=/path/to/libort_rt.a` is used.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D155925
According to the ELFv2 ABI
> This relocation type is used to specify a function call where the TOC pointer is not initialized. It is similar to R_PPC64_REL24 in that it specifies a symbol to be resolved. If the symbol resolves to a function that requires a TOC pointer (as determined by st_other bits) then a link editor must arrange for the call to be via the global entry point of the called function. Any stub code must not rely on a valid TOC base address in r2.
This patch fixes handling of `R_PPC64_REL24_NOTOC` by using the same stub code sequence as lld.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D155672
