In the change that added `--gap-fill`, the condition to choose the
sections to write in `BinaryWriter::write()` did not exclude zero-size
sections. However, zero-size sections did not have correct offsets
assigned in `BinaryWriter::finalize()`. The result is either a failed
assertion, or memory corruption due to writing to the buffer beyond its
size.
To fix this, exclude zero-size sections from writing. Also, add a zero-size
section to the test, which would trigger the problem.
`--gap-fill <value>` fills the gaps between sections with a specified
8-bit value, instead of zero.
`--pad-to <address>` pads the output binary up to the specified load
address, using the 8-bit value from `--gap-fill` or zero.
These options are only supported for ELF input and binary output.
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
Note that llvm::support::endianness has been renamed to
llvm::endianness while becoming an enum class as opposed to an
enum. This patch replaces support::{big,little,native} with
llvm::endianness::{big,little,native}.
Without the fix gcc warned with
../lib/ObjCopy/ELF/ELFObjcopy.cpp: In function 'uint64_t getSectionFlagsPreserveMask(uint64_t, uint64_t, uint16_t)':
../lib/ObjCopy/ELF/ELFObjcopy.cpp:106:31: warning: enumeral and non-enumeral type in conditional expression [-Wextra]
106 | ~(EMachine == EM_X86_64 ? ELF::SHF_X86_64_LARGE : 0UL);
| ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Currently, objcopy cannot set the new flag SHF_X86_64_LARGE. This change introduces the named flag "large" which translates to that section flag.
An "invalid argument" error is produced if a user attempts to set the flag on an architecture other than X86_64.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D153262
llvm-objcopy should not insert padding before a section if its
physical addresses is not aligned to section's alignment. This
behavior will match GNU objcopy and is important for embedded images
where the physical address is used to store the initial data image.
The loader typically will copy this image using a start symbol
created by the linker. If llvm-objcopy inserts padding before such a
section, the symbol address will not match the location in the image.
This commit refines the change in https://reviews.llvm.org/D128961
which intended to align sections which type changed from NOBITS and
their offset may not be aligned. However, it affected all sections.
Fix https://github.com/llvm/llvm-project/issues/62636
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D150276
This reverts commit eb1442d0f73c76cfb5051d133f858fe760d189cf.
The test tools/llvm-objcopy/ELF/binary-paddr.test fails on
ppc64be-clang-test-suite:
https://lab.llvm.org/buildbot#builders/231/builds/13120
Reverting at author's request.
llvm-objcopy should not insert padding before a section if its
physical addresses is not aligned to section's alignment. This
behavior will match GNU objcopy and is important for embedded images
where the physical address is used to store the initial data image.
The loader typically will copy this image using a start symbol
created by the linker. If llvm-objcopy inserts padding before such a
section, the symbol address will not match the location in the image.
This commit refines the change in https://reviews.llvm.org/D128961
which intended to align sections which type changed from NOBITS and
their offset may not be aligned. However, it affected all sections.
Fix https://github.com/llvm/llvm-project/issues/62636
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D150276
This change to llvm-objcopy preserves the ELF section sh_link to .symtab
so long as none of the symbol table indices have been changed.
Previously, any invocation of llvm-objcopy including a "no-op" would
clear any section sh_link to .symtab.
Differential Revision: https://reviews.llvm.org/D150859
The gABI prohibits multiple SH_SYMTAB sections. As a result,
llvm-objcopy was crashing in SymbolTableSection::removeSymbols(). This
patch fixes the issue by emitting an error if multiple SH_SYMTAB
sections are encountered when building an ELF object.
Fixes: https://github.com/llvm/llvm-project/issues/60448
Differential Revision: https://reviews.llvm.org/D143508
value() has undesired exception checking semantics and calls
__throw_bad_optional_access in libc++. Moreover, the API is unavailable without
_LIBCPP_NO_EXCEPTIONS on older Mach-O platforms (see
_LIBCPP_AVAILABILITY_BAD_OPTIONAL_ACCESS).
This fixes check-llvm.
This used %zu to print a uint64_t type. z is for size_t so on 32 bit
we tried to treat it as a 32 bit number.
Use PRIu64 instead to print as 64 bit everywhere.
When zlib is disabled at build time, the diagnostic `LLVM was not compiled with
LLVM_ENABLE_ZLIB: cannot decompress` for --decompress-debug-sections may be
inaccurate: if zstd is enabled, we should still support zstd decompression.
It's not useful to test zlib and zstd. Just remove the diagnostic and add a new
one before `compression::decompress`.
This fixes compress-debug-sections-zstd.test
Reviewed By: mariusz-sikora-at-amd, jhenderson, phosek
Differential Revision: https://reviews.llvm.org/D135744
For an ELFCLASS32 object, a compressed section due to --compress-debug-sections={zlib,zstd} has a
tail padding of 12 zero bytes. zlib happily allows this while zstd is rigid and
reports `error: '{{.*}}': failed to decompress section '.debug_foo': Src size is incorrect`.
Cole Kissane reported the problem.
Reviewed By: jhenderson, phosek
Differential Revision: https://reviews.llvm.org/D134385
"Z" was so named when we had both gABI ELFCOMPRESS_ZLIB and the legacy .zdebug support.
Now we have just one zlib format, we should use the more descriptive name.
This reverts commit 19dc3cff0f771bb8933136ef68e782553e920d04.
This reverts commit 5b19a1f8e88da9ec92b995bfee90043795c2c252.
This reverts commit 9397648ac8ad192f7e6e6a8e6894c27bf7e024e9.
This reverts commit 10842b44759f987777b08e7714ef77da2526473a.
Breaks the GCC build, as reported here:
https://reviews.llvm.org/D130506#3776415
This reverts commit c26dc2904b95b3685d883e760e84046ea6c33d7f.
The new Zstd dispatch has an ongoing design discussion related to https://reviews.llvm.org/D130516#3688123 .
Revert for now before it is resolved.
It's more natural to use uint8_t * (std::byte needs C++17 and llvm has
too much uint8_t *) and most callers use uint8_t * instead of char *.
The functions are recently moved into `llvm::compression::zlib::`, so
downstream projects need to make adaption anyway.
The request is mentioned on D129053. I feel that having this functionality is
mildly useful (not strong).
* Rename .ctors to .init_array and change sh_type to SHT_INIT_ARRAY (GNU objcopy
detects the special name but we don't).
* Craft tests for a new SHT_LLVM_* extension
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D129337
* GNU objcopy supports --set-section-flags src=... --rename-section src=tst and --set-section-flags runs first.
* GNU objcopy processes --update-section before --rename-section.
To match the two behaviors, postpone --rename-section and allow its use together
with --set-section-flags.
As a side effect, --rename-section=.foo1=.foo2 --add-section=.foo1=/dev/null
leads to .foo2 while GNU objcopy surprisingly produces .foo1 (so
--set-section-flags --add-section --rename-section do not form a total order).
I think the deviation is fine as a total order makes more sense.
Rename set-section-flags-and-rename.test to
set-section-attr-and-rename.test and additionally test --set-section-alignment
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D129336
* Refactor compression namespaces across the project, making way for a possible
introduction of alternatives to zlib compression.
Changes are as follows:
* Relocate the `llvm::zlib` namespace to `llvm::compression::zlib`.
Reviewed By: MaskRay, leonardchan, phosek
Differential Revision: https://reviews.llvm.org/D128953
For a SHT_NOBITS section like .bss, its sh_offset is typically not
aligned by sh_addralign. If it is converted to SHT_PROGBITS by
`--set-section-flags .bss=alloc,contents`, we should conceptually align
it when computing the output size for -O binary. Otherwise the output
size may be smaller than GNU objcopy produced output.
* binary-no-paddr.test has a case with non-sensical p_paddr=1 which has
a changed behavior. Update it.
Close https://github.com/llvm/llvm-project/issues/55246
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D128961
clang 14 removed -gz=zlib-gnu support and ld.lld removed linker input support
for zlib-gnu in D126793. Now let's remove zlib-gnu from llvm-objcopy.
* .zdebug* sections are no longer recognized as debug sections. --strip* don't remove them.
They are copied like other opaque sections
* --decompress-debug-sections does not uncompress .zdebug* sections
* --compress-debug-sections=zlib-gnu is not supported
It is very rare but in case a user has object files using .zdebug . They can use
llvm-objcopy<15 or GNU objcopy for uncompression.
--compress-debug-sections=zlib-gnu is unlikely ever used by anyone, so I do not
add a custom diagnostic.
Differential Revision: https://reviews.llvm.org/D128688
STB_GNU_UNIQUE is like STB_GLOBAL with extra semantics:
* gold and ld.lld: changed to STB_GLOBAL if --no-gnu-unique is specified
* glibc: unique even with dlopen `RTLD_LOCAL`, implies DF_1_NODELETE
Therefore, I think it makes sense for --weaken-symbol/--weaken-symbols/--weaken
to change STB_GNU_UNIQUE symbols.
binutils 2.39 will have the same behavior: https://sourceware.org/bugzilla/show_bug.cgi?id=28926
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D120638
Remove Expected<CompressedSection> factory functions in favor of constructors
now that zlib::compress returns void (D121512).
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D121644
With a sufficiently large output buffer, the only failure is Z_MEM_ERROR.
Check it and call the noreturn report_bad_alloc_error if applicable.
resize_for_overwrite may call report_bad_alloc_error as well.
Now that there is no other error type, we can replace the return type with void
and simplify call sites.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D121512
Current objcopy implementation has a possibility to add or update sections.
The incoming section is specified as a pair: section name and name of the file
containing section data. The interface does not allow to specify incoming
section as a memory buffer. This patch adds possibility to specify incoming
section as a memory buffer.
Differential Revision: https://reviews.llvm.org/D120486
libtool uses file names to name members of an static library.
Files, located in different directories and having matching name,
would have the same name inside an archive. This is not a problem
for ld, but may be a problem for ar. This patch renames files
from ObjCopy library to avoid names clashing.
See https://reviews.llvm.org/D88827#3335814
Differential Revision: https://reviews.llvm.org/D120345
