This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
The floating-point and MVE features together specify the MVE
functionality that is supported on the Cortex-M85 processor. But the FPU
extension for the underlying architecture(armv8.1-m.main) is FPV5 which
does not include MVE-F. So Compiler's -S output and `-save-temps=obj`
loses MVE feature which leads to assembler error. What happening here is
.fpu directive overrides any previously set features by .cpu directive.
Since the the corresponding .fpu generated (.fpu fpv5-d16) does not
include MVE-F, it overrides those features even though it is supported
and set by the .cpu directive. Looks like .fpu is supposed to do this.
In this case, there should be an .arch_extension directive re-enabling
the relevant extensions after .fpu if the goal is to keep these
extensions enabled. GCC also does the same.
So this patch enables the MVE features by emitting the below arch
extension:
.fpu fpv5-d16
.arch_extension mve.fp
---------
Co-authored-by: Simi Pallipurath <simi.pallipurath.com>
Advance the IT and VPT block state when parsing the .inst directive, so
that it is possible to use them to emit conditional instructions. If we
don't do this, then a later instruction inside or just after the block
will have a mis-matched condition, so be incorrectly reported as an
error.
This finishes the work of replacing OperandMatchResultTy with
ParseStatus, started in D154101.
As a drive-by change, rename some RegNo variables to just Reg
(a leftover from the days when RegNo had 'unsigned' type).
ParseStatus is slightly more convenient to use due to implicit
conversion from bool, which allows to do something like:
```
return Error(L, "msg");
```
when with MatchOperandResultTy it had to be:
```
Error(L, "msg");
return MatchOperand_ParseFail;
```
It also has more appropriate name since parse* methods are not only for
parsing operands.
Reviewed By: olista01
Differential Revision: https://reviews.llvm.org/D154304
SubtargetFeature.h is currently part of MC while it doesn't depend on
anything in MC. Since some LLVM components might have the need to work
with target features without necessarily needing MC, it might be
worthwhile to move SubtargetFeature.h to a different location. This will
reduce the dependencies of said components.
Note that I choose TargetParser as the destination because that's where
Triple lives and SubtargetFeatures feels related to that.
This issues came up during a JITLink review (D149522). JITLink would
like to avoid a dependency on MC while still needing to store target
features.
Reviewed By: MaskRay, arsenm
Differential Revision: https://reviews.llvm.org/D150549
This patch adds the LLVM-side plumbing for the following relocations:
- R_ARM_THM_ALU_ABS_G0_NC
- R_ARM_THM_ALU_ABS_G1_NC
- R_ARM_THM_ALU_ABS_G2_NC
- R_ARM_THM_ALU_ABS_G3
(see section 5.6.1.5, Static Thumb16 relocations, of the AArch32 ELF Arm ABI:
844a79fd4c/aaelf32/aaelf32.rst (5615static-thumb16-relocations))
Which can respectivly be generated by prefixing assembly symbols with:
- :lower0_7:
- :lower8_15:
- :upper0_7:
- :upper8_15:
LLD support for these relocations will be added in a follow-up patch
Reviewed By: john.brawn, MaskRay
Differential Revision: https://reviews.llvm.org/D149443
Emit a 4-byte alignment after the .arm directive and a 2-byte alignment
after the .thumb directive. The new behavior matches GNU assembler.
Fixes#53386
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D147763
The last uses were removed by:
commit 772e4931932270a82f38c83d4344c800b2f54eff
Author: Simon Tatham <simon.tatham@arm.com>
Date: Thu Jan 23 11:53:27 2020 +0000
Differential Revision: https://reviews.llvm.org/D151299
This patch migrates uses of StringRef::{starts,ends}with_insensitive
to StringRef::{starts,ends}_with_insensitive so that we can use names
similar to those used in std::string_view. I'm planning to deprecate
StringRef::{starts,ends}with_insensitive once the migration is
complete across the code base.
Differential Revision: https://reviews.llvm.org/D150426
This shrinks MCInstrDesc (and hence the whole TargetInsts table) because
we can store a 16-bit offset value to access the implicit operands,
instead of a pointer. This also reduces the number of relocs that need
to be applied when LLVM is compiled as position-independent code.
Differential Revision: https://reviews.llvm.org/D142218
Fixes#61607
Several names were repeated in this giant list. I have refactored
it and removed the duplicates.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D146619
Some memory instructions in the following sections of Armv7-M ARM allow
the .w mnemonic suffix, even though the preferred disassembly is without
the suffix.
A7.7.46 LDRB (immediate) T3
A7.7.55 LDRH (immediate) T3
A7.7.59 LDRSB (immediate) T2
A7.7.63 LDRSH (immediate) T2
A7.7.163 STRB (immediate) T3
A7.7.170 STRH (immediate) T3
This patch accepts the .w suffixes for theses instructions.
Pseudo-instructions and custom parsing logic are used instead of simple
aliases. More discussions are in these relevant patches:
https://reviews.llvm.org/D68916https://reviews.llvm.org/D96632
Differential Revision: https://reviews.llvm.org/D142980
This will allow an entry in the table to access data that is stored
immediately after the end of the table, by adding its opcode value
to its address.
Differential Revision: https://reviews.llvm.org/D142217
Change MCInstrDesc::operands to return an ArrayRef so we can easily use
it everywhere instead of the (IMHO ugly) opInfo_begin and opInfo_end.
A future patch will remove opInfo_begin and opInfo_end.
Also use it instead of raw access to the OpInfo pointer. A future patch
will remove this pointer.
Differential Revision: https://reviews.llvm.org/D142213
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
This patch makes code less readable but it will clean itself after all functions are converted.
Differential Revision: https://reviews.llvm.org/D138665
These instructions already had errors for operands that could not share
the same register:
VCMUL, VMULL, VQDMULL.
This extends that to a few others:
VREV64, VQDMULLqr, VCADD and VHCADD.
Only the i32 types require the error.
Differential Revision: https://reviews.llvm.org/D135560
Although we only currently have one error produced in this function I am
working on changes right now that add some more. This change makes the
error location more accurate.
Differential Revision: https://reviews.llvm.org/D133016
According to the ABI for the Arm Architecture, the value for the
Tag_also_compatible_with eabi attribute is represented by an NTBS entry.
This string value, in turn, is composed of a pair of tag+value encoded
in one of two formats:
- ULEB128: tag, ULEB128: value, 0.
- ULEB128: tag, NBTS: data.
(See [[ 60a8eb8c55/addenda32/addenda32.rst (3373secondary-compatibility-tag) | section 3.3.7.3 on the Addenda to, and Errata in, the ABI for the Arm Architecture ]].)
Currently the Arm assembly parser and streamer ignore the encoding of
the attribute's NTBS value, which can result in incorrect attributes
being emitted in both assembly and object file outputs.
This patch fixes these issues by properly handing the value's encoding.
An update to llvm-readobj to properly handle the attribute's value will be
covered by a separate patch.
Patch by Victor Campos and Lucas Prates.
Reviewed By: vhscampos
Differential Revision: https://reviews.llvm.org/D129500
The directive name is not useful because the next line replicates the error line
which includes the directive. The prevailing style uses "expected newline".
This includes .seh_* directives for generating it from assembly.
It is designed fairly similarly to the ARM64 handling.
For .seh_handler directives, such as
".seh_handler __C_specific_handler, @except" (which is supported
on x86_64 and aarch64 so far), the "@except" bit doesn't work in
ARM assembly, as '@' is used as a comment character (on all current
platforms).
Allow using '%' instead of '@' for this purpose. This convention
is used by GAS in similar contexts already,
e.g. [1]:
Note on targets where the @ character is the start of a comment
(eg ARM) then another character is used instead. For example the
ARM port uses the % character.
In practice, this unfortunately means that all such .seh_handler
directives will need ifdefs for ARM.
Contrary to ARM64, on ARM, it's quite common that we can't evaluate
e.g. the function length at this point, due to instructions whose
length is finalized later. (Also, inline jump tables end with
a ".p2align 1".)
If unable to to evaluate the function length immediately, emit
it as an MCExpr instead. If we'd implement splitting the unwind
info for a function (which isn't implemented for ARM64 yet either),
we wouldn't know whether we need to split it though.
Avoid calling getFrameIndexOffset() on an unset
FuncInfo.UnwindHelpFrameIdx, to avoid triggering asserts in the
preexisting testcase CodeGen/ARM/Windows/wineh-basic.ll. (Once
MSVC exception handling is fully implemented, those changes
can be reverted.)
[1] https://sourceware.org/binutils/docs/as/Section.html#Section
Differential Revision: https://reviews.llvm.org/D125645
The patch adds SPIRV-specific MC layer implementation, SPIRV object
file support and SPIRVInstPrinter.
Differential Revision: https://reviews.llvm.org/D116462
Authors: Aleksandr Bezzubikov, Lewis Crawford, Ilia Diachkov,
Michal Paszkowski, Andrey Tretyakov, Konrad Trifunovic
Co-authored-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Co-authored-by: Ilia Diachkov <iliya.diyachkov@intel.com>
Co-authored-by: Michal Paszkowski <michal.paszkowski@outlook.com>
Co-authored-by: Andrey Tretyakov <andrey1.tretyakov@intel.com>
Co-authored-by: Konrad Trifunovic <konrad.trifunovic@intel.com>
DXIL is wrapped in a container format defined by the DirectX 11
specification. Codebases differ in calling this format either DXBC or
DXILContainer.
Since eventually we want to add support for DXBC as a target
architecture and the format is used by DXBC and DXIL, I've termed it
DXContainer here.
Most of the changes in this patch are just adding cases to switch
statements to address warnings.
Reviewed By: pete
Differential Revision: https://reviews.llvm.org/D122062
AArch32/Armv8A introduced the performance deprecation of certain patterns
of IT instructions. After some debate internal to ARM, this is now being
reverted; i.e. no IT instruction patterns are performance deprecated
anymore, as the perfomance degredation is not significant enough.
This reverts the following:
"ARMv8-A deprecates some uses of the T32 IT instruction. All uses of
IT that apply to instructions other than a single subsequent 16-bit
instruction from a restricted set are deprecated, as are explicit
references to the PC within that single 16-bit instruction. This permits
the non-deprecated forms of IT and subsequent instructions to be treated
as a single 32-bit conditional instruction."
The deprecation no longer applies, but the behaviour may be controlled
by the -arm-restrict-it and -arm-no-restrict-it command-line options,
with the latter being the default. No warnings about complex IT blocks
will be generated.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D118044
