Irritatingly, atomic_store had operands in the opposite order from
regular store. This made it difficult to share patterns between
regular and atomic stores.
There was a previous incomplete attempt to move atomic_store into the
regular StoreSDNode which would be better.
I think it was a mistake for all atomicrmw to swap the operand order,
so maybe it's better to take this one step further.
https://reviews.llvm.org/D123143
This patch is a follow up to D43315, and adds the following new load/store
TLS specific instructions for integer and floating point scalar types:
```
LHAXTLS
LWAXTLS
LHAXTLS_32
LWAXTLS_32
LFSXTLS
LFDXTLS
STFSXTLS
STFDXTLS
```
These instructions can be used to optimized TLS sequences when D-Form
loads/stores follow an ADD_TLS instruction.
Duplicate versions of these instructions are also added within an isAsmParserOnly=1
block (similar to D47382) to allow llvm-mc to assemble these instructions.
Differential Revision: https://reviews.llvm.org/D153645
This patch adds support for the TLS local-exec access model on AIX to allow
for the ability to generate the 64-bit (specifically, non-optimized) code sequence.
For this patch in particular, the sequence that is generated involves a load of the
variable offset, followed by an add of the loaded variable offset to r13 (which is
thread pointer, respectively). This code sequence looks like the following:
```
ld reg1,var[TC](2)
add reg2, reg1, r13 // r13 contains the thread pointer
```
The TOC (.tc pseudo-op) entries generated in the assembly files are also
changed where we add the @le relocation for the variable offset.
Differential Revision: https://reviews.llvm.org/D149722
This is a follow-on to https://reviews.llvm.org/D134073.
Currently, all of the "memri"-style complex operands, which contain
both a register and an immediate, are encoded into a single field in
the instruction definition. This requires complex encoders/decoders,
and instruction definitions that insert and extract the correct parts
of the bits.
Now, switch to naming and encoding/decoding the sub-operands
separately.
Thus, we can now disable useDeprecatedPositionallyEncodedOperands.
Reviewed By: barannikov88
Differential Revision: https://reviews.llvm.org/D137670
This is a follow-on to https://reviews.llvm.org/D134073.
After https://reviews.llvm.org/D137653 we can now switch the PPC
target away from positional operand matching.
This patch fixes all of the "easy" cases. While this changes a large
number of lines of tablegen source, it results in only a single
non-comment change in the code generated by tablegen: the (unused)
codegen-only "MTVRSAVEv" instruction was previously incorrectly
encoding operand 0, and now encodes (correctly) operand 1.
Changes which result in generated-code changes have been split off
into the next (smaller) patch, for ease of review.
Reviewed By: barannikov88
Differential Revision: https://reviews.llvm.org/D137661
There are a few issues with the code we generate for atomic operations and the way we generate it:
- Hard coded CR0 for compares
- Order of operands for compares not conducive to
emitting compare-immediate or for CSE of compares
- Missing MachineMemOperand for st[bhwd]cx intrinsics
- Missing intrinsic properties for the same
- Unnecessary blocks with store conditional
instructions to clear reservation (which ends
up hindering performance)
- Move from CR instructions just to compare the
result of a store conditional with zero (even
though it is a record-form)
This patch aims to resolve all of those issues.
Differential revision: https://reviews.llvm.org/D134783
This feature implements support for making entries in the exception section
on XCOFF on the direct assembly path using the ".except" pseudo-op. It also
provides functionality to lower entries (comprised of language and reason
codes) into the exception section through the use of annotation metadata
attached to llvm.ppc.trap/trapd/tw/tdw intrinsics. Integrated assembler
support will be provided in another review. https://reviews.llvm.org/D133030
needs to merge first for LIT tests
Reviewed By: shchenz, RKSimon
Differential Revision: https://reviews.llvm.org/D132146
Add isNotDuplicable to CTRLoop pseudo instructions, to avoid other pass
such as early-tailduplication break the loop structure by duplicating
pseudo instructions.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D132738
This patch fixes the following two bugs in `PPCInstrInfo::isSignOrZeroExtended` helper, which is used from sign-/zero-extension elimination in PPCMIPeephole pass.
- Registers defined by load with update (e.g. LBZU) were identified as already sign or zero-extended. But it is true only for the first def (loaded value) and not for the second def (i.e. updated pointer).
- Registers defined by ORIS/XORIS were identified as already sign-extended. But, it is not true for sign extension depending on the immediate (while it is ok for zero extension).
To handle the first case, the parameter for the helpers is changed from `MachineInstr` to a register number to distinguish first and second defs. Also, this patch moves the initialization of PPCMIPeepholePass to allow mir test case.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D40554
Map hardware loop intrinsics loop_decrement and set_loop_iteration
to the new PowerPC pseudo instructions, so that the hardware loop
intrinsics will be expanded to normal cmp+branch form or ctrloop
form based on the CTR register usage on MIR level.
Reviewed By: lkail
Differential Revision: https://reviews.llvm.org/D123366
This patch implements a new way to generate the CTR loops. Now the
intrinsics inserted in hardware loop pass will be mapped to pseudo
instructions and these pseudo instructions will be expanded to CTR
loop or normal compare+branch loop in this post ISEL pass.
Reviewed By: lkail
Differential Revision: https://reviews.llvm.org/D122125
This fixes CVE-2019-15847, preventing random number generation from
being merged.
Reviewed By: lkail
Differential Revision: https://reviews.llvm.org/D122783
The LDMX instruction was to be potentially added in P9 but it was never added
in either ISA 3.0 or ISA 3.1. This patch removes that instruction as it is
currently still an invalid instruction.
Reviewed By: lei
Differential Revision: https://reviews.llvm.org/D118074
Add support for Return Oriented Programming (ROP) protection for 32 bit.
This patch also adds a testing for AIX on both 64 and 32 bit.
Reviewed By: amyk
Differential Revision: https://reviews.llvm.org/D111362
The patch expands the existing 32-bit toc-data attribute support to 64-bit.
In both 32-bit and 64-bit it is supported for small code model only.
Differential Revision: https://reviews.llvm.org/D114654
This patch adds the backend optimization to match XL behavior for the two
builtins __tdw and __tw that when the second input argument is an immediate,
emitting tdi/twi instructions instead of td/tw.
Reviewed By: nemanjai, amyk, PowerPC
Differential revision: https://reviews.llvm.org/D112285
Currently, the floating point instructions that depend on
rounding mode are correctly marked in the PPC back end with
an implicit use of the RM register. Similarly, instructions
that explicitly define the register are marked with an
implicit def of the same register. So for the most part,
RM-using code won't be moved across RM-setting instructions.
However, calls are not marked as RM-setting instructions so
code can be moved across calls. This is generally desired,
but so is the ability to turn off this behaviour with an
appropriate option - and -frounding-math really should be
that option.
This patch provides a set of call instructions (for direct
and indirect calls) that are marked with an implicit def of
the RM register. These will be used for calls that are marked
with the strictfp attribute.
Differential revision: https://reviews.llvm.org/D111433
This patch makes sure that the builtins __builtin_ppc_load8r and
__ builtin_ppc_store8r are only available for Power 7 and up.
Currently the builtins seem to produce incorrect code if used for
Power 6 or before.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D110653
PowerPC can model these instructions, so we don't need this flag set.
Reviewed By: shchenz, jsji
Differential Revision: https://reviews.llvm.org/D71983
Add builtin and intrinsic for `__addex`.
This patch is part of a series of patches to provide builtins for
compatibility with the XL compiler.
Reviewed By: stefanp, nemanjai, NeHuang
Differential Revision: https://reviews.llvm.org/D107002
Implemented builtins for mtmsr, mfspr, mtspr on PowerPC;
the patch is intended for XL Compatibility.
Differential revision: https://reviews.llvm.org/D106130
This patch is in a series of patches to provide builtins for compatibility
with the XL compiler. This patch add the builtin and emit target independent
code for __cmpb.
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D105194
This patch is in a series of patches to provide builtins for compatibility
with the XL compiler. This patch adds the builtins and instrisics for population
count, reversed load and store related operations.
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D106021
This patch implements the `__popcntb` XL compatibility builtin for 32bit in the frontend and backend. This patch also updates tests for `__popcntb` and other XL Compat sync related builtins.
Reviewed By: #powerpc, nemanjai, amyk
Differential Revision: https://reviews.llvm.org/D105360
This patch uses AtomicExpandPass to implement quadword lock free atomic operations. It adopts the method introduced in https://reviews.llvm.org/D47882, which expand atomic operations post RA to avoid spilling that might prevent LL/SC progress.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D103614
This patch is in a series of patches to provide builtins for compatibility
with the XL compiler. This patch adds the builtins and instrisics for compare
and multiply related operations.
Reviewed By: nemanjai, #powerpc
Differential revision: https://reviews.llvm.org/D102875
LDARX and LWARX sometimes gets optimized out by the compiler
when it is critical to the correctness of the code. This inline asm generation
ensures that it preserved.
Differential Revision: https://reviews.llvm.org/D105754
This patch implements trap and FP to and from double conversions. The builtins
generate code that mirror what is generated from the XL compiler. Intrinsics
are named conventionally with builtin_ppc, but are aliased to provide the same
builtin names as the XL compiler.
Differential Revision: https://reviews.llvm.org/D103668
This patch implaments the load and reserve and store conditional
builtins for the PowerPC target, in order to have feature parody with
xlC on AIX.
Differential revision: https://reviews.llvm.org/D105236
Export `lq`, `stq`, `lqarx` and `stqcx.` in preparation for implementing 16-byte lock free atomic operations on AIX.
Add a new register class `g8prc` for these instructions, since these instructions require even-odd register pair.
Reviewed By: nemanjai, jsji, #powerpc
Differential Revision: https://reviews.llvm.org/D103010
This patch updates the scalar atomic patterns to use the refactored load/store
implementation introduced in D93370.
All existing test cases pass with when the refactored patterns are utilized.
Differential Revision: https://reviews.llvm.org/D94498
This patch introduces a new infrastructure that is used to select the load and
store instructions in the PPC backend.
The primary motivation is that the current implementation of selecting load/stores
is dependent on the ordering of patterns in TableGen. Given this limitation, we
are not able to easily and reliably generate the P10 prefixed load and stores
instructions (such as when the immediates that fit within 34-bits). This
refactoring is meant to provide us with more control over the patterns/different
forms to exploit, as well as eliminating dependency of pattern declaration in TableGen.
The idea of this refactoring is that it introduces a set of addressing modes that
correspond to different instruction formats of a particular load and store
instruction, along with a set of common flags that describes a load/store.
Whenever a load/store instruction is being selected, we analyze the instruction
and compute a set of flags for it. The computed flags are then used to
select the most optimal load/store addressing mode.
This patch is the first of a series of patches to be committed - it contains the
initial implementation of the refactored load/store selection infrastructure and
also updates P8/P9 patterns to adopt this infrastructure. The idea is that
incremental patches will add more implementation and support, and eventually
the old implementation will be removed.
Differential Revision: https://reviews.llvm.org/D93370
There are four new PowerPC instructions that are introduced in
Power 10. They are hashst, hashchk, hashstp, hashchkp.
These instructions will be used for ROP Protection.
This patch adds the four instructions.
Reviewed By: nemanjai, amyk, #powerpc
Differential Revision: https://reviews.llvm.org/D99375
This reverts commit 16fe741c69429235210c03c46420f8fa6aece4a1.
Reason: Broke the UBSan buildbots. More information available in the
phabricator review: https://reviews.llvm.org/D99375
There are four new PowerPC instructions that are introduced in
Power 10. They are hashst, hashchk, hashstp, hashchkp.
These instructions will be used for ROP Protection.
This patch adds the four instructions.
Reviewed By: nemanjai, amyk, #powerpc
Differential Revision: https://reviews.llvm.org/D99375
Add support for the TLS general dynamic access model to assembly
files on AIX 64-bit.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D98078
Copy-paste P9 insns were added back in 2016,
however, looks like the opcodes has changed in ISA3.1.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D97416
Legacy AIX assembly might not support all extended mnes,
add one feature bit to control the generation in MC,
and avoid generating them by default on AIX.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D94458
The LD/STD likewise instruction are selected only when the alignment in
the load/store >= 4 to deal with the case that the offset might not be
known(i.e. relocations). That means we have to select the X-Form load
for %0 = load i64, i64* %arrayidx, align 2 In fact, we can still select
the D-Form load if the offset is known. So, we only query the load/store
alignment when we don't know if the offset is a multiple of 4.
Reviewed By: jji, Nemanjai
Differential Revision: https://reviews.llvm.org/D93099
Instruction darn was introduced in ISA 3.0. It means 'Deliver A Random
Number'. The immediate number L means:
- L=0, the number is 32-bit (higher 32-bits are all-zero)
- L=1, the number is 'conditioned' (processed by hardware to reduce bias)
- L=2, the number is not conditioned, directly from noise source
GCC implements them in three separate intrinsics: __builtin_darn,
__builtin_darn_32 and __builtin_darn_raw. This patch implements the
same intrinsics. And this change also addresses Bugzilla PR39800.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92465
Summary: The imm operands of some instructions are not defined accurately in td.
This is a small patch to correct these definitions.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D91603
This PR adds more register class support in PowerPC,
mark OperandType for imm and memory operands.
Also added more unit tests for SnippetGenerator.
Reviewed By: #powerpc, steven.zhang
Differential Revision: https://reviews.llvm.org/D88044
