Summary:
When -ffunction-sections is on, this patch makes the compiler to generate unique LSDA and EH info sections for functions on AIX by appending the function name to the section name as a suffix. This will allow the AIX linker to garbage-collect unused function.
Reviewed by: MaskRay, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D124855
This test was previously generated by the script, but the script
now uses CHECK-NEXT instead of CHECK.
This is preparation for a strictfp related patch I'm working on.
This patch turns on support for CR bit accesses for Power8 and above. The reason
why CR bits are turned on as the default for Power8 and above is that because
later architectures make use of builtins and instructions that require CR bit
accesses (such as the use of setbc in the vector string isolate predicate
and bcd builtins on Power10).
This patch also adds the clang portion to allow for turning on CR bits in the
front end if the user so desires to.
Differential Revision: https://reviews.llvm.org/D124060
Per the guidance in
https://llvm.org/docs/Atomics.html#atomics-and-ir-optimization,
an atomic load from a constant global can be dropped, as there can
be no stores to synchronize with. Any write to the constant global
would be UB.
IPSCCP will already drop such loads, but the main helper in Local
doesn't recognize this currently. This is motivated by D118387.
Differential Revision: https://reviews.llvm.org/D124241
PowerPC supports `ppc_fp128`, which is not an IEEE floating point
type. The generic lowering of llvm.is_fpclass could not handle it
properly. This change extends the generic lowering code to
support `ppc_fp128`.
The change was tested on emulator using runtime tests from
https://reviews.llvm.org/D112933 and the patch for clang
https://reviews.llvm.org/D112932.
Differential Revision: https://reviews.llvm.org/D113908
For the AIX linker, under default options, global or weak symbols which
have no visibility bits set to zero (i.e. no visibility, similar to ELF
default) are only exported if specified on an export list provided to
the linker. So AIX has an additional visibility style called
"exported" which indicates to the linker that the symbol should
be explicitly globally exported.
This change maps "dllexport" in the LLVM IR to correspond to XCOFF
exported as we feel this best models the intended semantic (discussion
on the discourse RFC thread: https://discourse.llvm.org/t/rfc-adding-exported-visibility-style-to-the-ir-to-model-xcoff-exported-visibility/61853)
and allows us to enable writing this visibility for the AIX target
in the assembly path.
Reviewed By: DiggerLin
Differential Revision: https://reviews.llvm.org/D123951
This is a follow on to the revert of D84265 to add an error if we'd need
to write a non-zero visibility type in the xcoff object file. We can't
currently do that because we lack the auxilary header to interpret the
bits in XCOFF32. This is important because visibility is being enabled
in the assembly writing path, and without this error the visibility
could be silently ignored.
Differential Revision: https://reviews.llvm.org/D124392
We can process the long shuffles (working across several actual
vector registers) in the best way if we take the actual register
represantion into account. We can build more correct representation of
register shuffles, improve number of recognised buildvector sequences.
Also, same function can be used to improve the cost model for the
shuffles. in future patches.
Part of D100486
Differential Revision: https://reviews.llvm.org/D115653
We can process the long shuffles (working across several actual
vector registers) in the best way if we take the actual register
represantion into account. We can build more correct representation of
register shuffles, improve number of recognised buildvector sequences.
Also, same function can be used to improve the cost model for the
shuffles. in future patches.
Part of D100486
Differential Revision: https://reviews.llvm.org/D115653
This fixes CVE-2019-15847, preventing random number generation from
being merged.
Reviewed By: lkail
Differential Revision: https://reviews.llvm.org/D122783
AtomicExpandPass uses this variable to determine emitting libcalls or not. The default value is 1024 and if we don't specify it for PPC64 explicitly, AtomicExpandPass won't emit `__atomic_*` libcalls for those target unable to inline atomic ops and finally the backend emits `__sync_*` libcalls. Thanks @efriedma for pointing it out.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D122868
Make 16-byte atomic type aligned to 16-byte on PPC64, thus consistent with GCC. Also enable inlining 16-byte atomics on non-AIX targets on PPC64.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D122377
This reverts commit 83a798d4b0e17ac41d5430f1290d3661343eee1e.
As discussed in D120714 with @thakis, the patch added unneeded complexity
without noticeable benefits.
Place PersistentId declaration under #if LLVM_ENABLE_ABI_BREAKING_CHECKS to
reduce memory usage when it is not needed.
Differential Revision: https://reviews.llvm.org/D120714
Add support for builtin_[max|min] which has below prototype:
A builtin_max (A1, A2, A3, ...)
All arguments must have the same type; they must all be float, double, or long double.
Internally use SelectCC to get the result.
Reviewed By: qiucf
Differential Revision: https://reviews.llvm.org/D122478
To store a byval parameter the existing code would store as many 8 byte elements
as was required to store the full size of the byval parameter.
For example, a paramter of size 16 would store two element of 8 bytes.
A paramter of size 12 would also store two elements of 8 bytes.
This would sometimes store too many bytes as the size of the paramter is not
always a factor of 8.
This patch fixes that issue and now byval paramters are stored with the correct
number of bytes.
Reviewed By: nemanjai, #powerpc, quinnp, amyk
Differential Revision: https://reviews.llvm.org/D121430
Add a compiler option and the instructions required to set the
special Data Stream Control Register (DSCR). The special register will
not be set by default.
Original patch by: Muhammad Usman
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D117013
The BL8_NOTOC_RM instruction was incorrectly producing a relocation that reqired
a TOC restore after the call. This patch fixes that issue and the notoc
relocation is now used.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D122012
After D108936, @llvm.smul.with.overflow.i64 was lowered to __multi3
instead of __mulodi4, which also doesn't exist on PowerPC 32-bit, not
even with compiler-rt. Block it as well so that we get inline code.
Because libgcc doesn't have __muloti4, we block that as well.
Fixes#54460.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D122090
This is the first patch to enable the XCOFF64 object writer.
Currently only fileHeader and sectionHeaders are supported.
Reviewed By: jhenderson, DiggerLin
Differential Revision: https://reviews.llvm.org/D120861
When generating a all-one mask value whose bitwidth is larger than 64, signed extension should be used rather then zero extension.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D120865
Add the calling convention for the vector pair registers.
These registers overlap with the vector registers.
Part of an original patch by: Lei Huang
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D117225
We are going to remove the old 'perfect shuffle' optimization since it
brings performance penalty in hot loop around vectors. For example, in
following loop sharing the same mask:
%v.1 = shufflevector ... <0,1,2,3,8,9,10,11,16,17,18,19,24,25,26,27>
%v.2 = shufflevector ... <0,1,2,3,8,9,10,11,16,17,18,19,24,25,26,27>
The generated instructions will be `vmrglw-vmrghw-vmrglw-vmrghw` instead
of `vperm-vperm`. In some large loop cases, this causes 20%+ performance
penalty.
The original attempt to resolve this is to pre-record masks of every
shufflevector operation in DAG, but that is somewhat complex and brings
unnecessary computation (to scan all nodes) in optimization. Here we
disable it by default. There're indeed some cases becoming worse after
this, which will be fixed in a more careful way in future patches.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D121082
VSX introduced some permute instructions that are direct
replacements for Altivec ones except they can target all
the VSX registers. We have added code generation for most
of these but somehow missed the low/hi word merges (XXMRG[LH]W).
This caused some additional spills on some large
computationally intensive code.
This patch simply adds the missed patterns.
Currently in Clang, we have two types of builtins for fnmsub operation:
one for float/double vector, they'll be transformed into IR operations;
one for float/double scalar, they'll generate corresponding intrinsics.
But for the vector version of builtin, the 3 op chain may be recognized
as expensive by some passes (like early cse). We need some way to keep
the fnmsub form until code generation.
This patch introduces ppc.fnmsub.* intrinsic to unify four fnmsub
intrinsics.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D116015
When inserting undef into buildvectors created from shuffles of
buildvectors, we convert elements to the largest needed type. This had
the effect of converting undef into 0, which isn't needed as the
buildvector implicitly truncates and trunc(zext(undef)) == undef.
Differential Revision: https://reviews.llvm.org/D121002
When parsing MachineMemOperands, MIRParser treated the "align" keyword
the same as "basealign". Really "basealign" should specify the
alignment of the MachinePointerInfo base value, and "align" should
specify the alignment of that base value plus the offset.
This worked OK when the specified alignment was no larger than the
alignment of the offset, but in cases like this it just caused
confusion:
STW killed %18, 4, %stack.1.ap2.i.i :: (store (s32) into %stack.1.ap2.i.i + 4, align 8)
MIRPrinter would never have printed this, with an offset of 4 but an
align of 8, so it must have been written by hand. MIRParser would
interpret "align 8" as "basealign 8", but I think it is better to give
an error and force the user to write "basealign 8" if that is what they
really meant.
Differential Revision: https://reviews.llvm.org/D120400
Change-Id: I7eeeefc55c2df3554ba8d89f8809a2f45ada32d8
This test doesn't work because the CHECK-NOT line is actually checking
something that only exists on stderr and not stdout.
Changed the test so that we now check both stderr and stdout.
Changed the test so that we check pwr9, pwr10, and future. The cpu names of
power9 or power10 are not supported in the llc backend.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D120349
Previous we used sra (X, size(X)-1); xor (add (X, Y), Y).
By placing sub at the end, we allow RISCV to combine sign_extend_inreg
with it to form subw.
Some X86 tests for Z - abs(X) seem to have improved as well.
Other targets look to be a wash.
I had to modify ARM's abs matching code to match from sub instead of
xor. Maybe instead ISD::ABS should be made legal. I'll try that in
parallel to this patch.
This is an alternative to D119099 which was focused on RISCV only.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D119171
the same address by symbol types.
Summary: In XCOFF, each section comes with a default symbol
with the same name as the section. It doesn't bind
to code locations and it may cause incorrect display
of symbol names under `llvm-objdump -d`.
This patch changes the priority of symbols with the
same address by symbol type.
Reviewed By: jhenderson, shchenz
Differential Revision: https://reviews.llvm.org/D117642
The `__builtin_pdepd` and `__builtin_pextd` are P10 builtins that are meant to
be used under 64-bit only. For instance, when the builtins are compiled under
32-bit mode:
```
$ cat t.c
unsigned long long foo(unsigned long long a, unsigned long long b) {
return __builtin_pextd(a,b);
}
$ clang -c t.c -mcpu=pwr10 -m32
ExpandIntegerResult #0: t31: i64 = llvm.ppc.pextd TargetConstant:i32<6928>, t28, t29
fatal error: error in backend: Do not know how to expand the result of this operator!
```
This patch adds sema checking for these builtins to compile under 64-bit
mode only and on P10. The builtins will emit a diagnostic when they are compiled on
non-P10 compilations and on 32-bit mode.
Differential Revision: https://reviews.llvm.org/D118753
This patch updates the handling of vectors in getPreferredVectorAction():
For single-element and scalable vectors, fall back to default vector legalization
handling. For vNi1 vectors, add handling to either split or promote them in
order to prevent the production of wide v256i1/v512i1 types.
The following assertion is fixed by this patch, as we ended up producing the
wide vector types (that are used for MMA) in the backend prior to this fix.
```
Assertion failed: VT.getSizeInBits() == Operand.getValueSizeInBits() &&
"Cannot BITCAST between types of different sizes!"
```
Differential Revision: https://reviews.llvm.org/D119521
Power ISA 3.1 adds xsmaxcqp/xsmincqp for quad-precision type-c max/min selection,
and this opens the opportunity to improve instruction selection on: llvm.maxnum.f128,
llvm.minnum.f128, and select_cc ordered gt/lt and (don't care) gt/lt.
Reviewed By: nemanjai, shchenz, amyk
Differential Revision: https://reviews.llvm.org/D117006
For PGO on AIX, when we switch to the linux-style PGO variable access
(via _start and _stop labels), we need the compiler to generate a .ref
assembly for each of the three csects:
- __llvm_prf_data[RW]
- __llvm_prf_names[RO]
- __llvm_prf_vnds[RW]
We insert the .ref inside the __llvm_prf_cnts[RW] csect so that if it's
live then the 3 csects are live.
For example, for a testcase with at least one function definition, when
compiled with -fprofile-generate we should generate:
.csect __llvm_prf_cnts[RW],3
.ref __llvm_prf_data[RW] <<============ needs to be inserted
.ref __llvm_prf_names[RO] <<===========
the __llvm_prf_vnds is not always present, so we reference it only when
it's present.
Reviewed By: sfertile, daltenty
Differential Revision: https://reviews.llvm.org/D116607
