This is an experimental address space for strided buffers. These buffers
can have structs as elements and
a stride > 1.
These pointers allow the indexed access in units of stride, i.e., they
point at `buffer[index * stride]`.
Thus, we can use the `idxen` modifier for buffer loads.
We assign address space 9 to 192-bit buffer pointers which contain a
128-bit descriptor, a 32-bit offset and a 32-bit index. Essentially,
they are fat buffer pointers with an additional 32-bit index.
Debugify is extremely useful as a testing and debugging tool, and a good
number of LLVM-IR transform tests use it. We need it to support "new"
non-instruction debug-info to get test coverage, but it's not important
enough to completely convert right now (and it'd be a large
undertaking). Thus: convert to/from dbg.value/DPValue mode on entry and
exit of the pass, which gives us the functionality without any further
work. The cost is compile-time, but again this is only happening during
tests.
Tested by: the large set of debugify tests enabled here. Note the
InstCombine test (cast-mul-select.ll) that hasn't been fully enabled:
this is because there's a debug-info sinking piece of code there that
hasn't been instrumented.
Remove support for zext and sext constant expressions. All places
creating them have been removed beforehand, so this just removes the
APIs and uses of these constant expressions in tests.
There is some additional cleanup that can be done on top of this, e.g.
we can remove the ZExtInst vs ZExtOperator footgun.
This is part of
https://discourse.llvm.org/t/rfc-remove-most-constant-expressions/63179.
Fix crash on RAUW due to locals and globals having different address
spaces. This is the intent of the original code, but it assumes the
alloca address space is 0. This patch fixes the code to check that the
global's address space matches `DL.getAllocaAddrSpace()` instead.
Fixes#65155
This allows use with non-0 address space stacks. llvm_ptr_ty should
never be used. This could use some more percolation up through mlir,
but this is enough to fix existing tests.
https://reviews.llvm.org/D156666
This is a follow-up to b71edfaa4ec3c998aadb35255ce2f60bba2940b0
since I forgot the lit.local.cfg files in that one.
Reformatting is done with `black`.
If you end up having problems merging this commit because you
have made changes to a python file, the best way to handle that
is to run git checkout --ours <yourfile> and then reformat it
with black.
If you run into any problems, post to discourse about it and
we will try to help.
RFC Thread below:
https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Reviewed By: barannikov88, kwk
Differential Revision: https://reviews.llvm.org/D150762
Fixes assert with pointers with different address spaces. We
could keep looking through addrspacecast, but it would require
checking for null handling of the access address space.
Fixes#62384
As long as aliasee has `@llvm.used` or `@llvm.compiler.used` references, we cannot do the related replace or delete operations. Even if it is a Local Linkage, we cannot infer if there is no other use for it, such as asm or other future added cases.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D145293
The llvm.used (or llvm.compiler.used) global variable is an array that contains a list of pointers to global variables and functions.
The GlobalOpt (Global Variable Optimizer) pass is not preserving the address space for llvm.used and llvm.compiler.used global variables.This patch updates the setUsedInitializer() function in GlobalOpt.cpp, so the address space is preserved.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D144518
This improves the readability of debugging intrinsics. Instead of:
call void @llvm.dbg.value(metadata !2, ...)
!2 = !{}
We will see:
call void @llvm.dbg.value(metadata !{}, ...)
!2 = !{}
Note that we still get a numbered metadata entry for the node even if it's not
used elsewhere. This is to avoid adding more context to the print functions.
This is already legal IR - LLVM can parse and understand it - so there is no
need to update the parser.
The next patches in this stack will make such empty metadata operands more
common and semantically important.
Related to https://discourse.llvm.org/t/auto-undef-debug-uses-of-a-deleted-value
Reviewed By: StephenTozer
Differential Revision: https://reviews.llvm.org/D140900
If the memset is large, checking every single byte of the global
may be very slow. Add an upper bound on the size of memset we
handle.
For the common special case of memset zeroinitializer to zero,
add a fastpath that checks just that and is not length limited.
Fixes https://github.com/llvm/llvm-project/issues/62191.
Rather than cleanup up dead constant expressions as we go along,
do this once at the end. This aligns it with the
CleanupConstantGlobalUsers() implementation and avoids
any invalidation issues.
Fixes https://github.com/llvm/llvm-project/issues/61674.
If all stores only store the initializer value of a global, consider it
as not stored in the heuristic. GlobalOpt will remove such stores later
on.
Depends on D129857.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D144476
Add an additional tests that stores the initializer, but the global
doesn't have a zeroinitializer. Also separate out the tests for storing
initializers.
Add extra tests for D144476.
Extend CleanupPointerRootUsers to iterate over a worklist, add users of
constant expressions to the worklist to enable additional cleanups.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D144468
When limiting the number of parts we split a global into, ignore
any parts that are either only loaded or only stored, because we
expect these to be optimized away after SRA.
Differential Revision: https://reviews.llvm.org/D129857
Should cover most of the tests for GVN, GVNHoist, GVNSink, GlobalOpt,
GlobalSplit, InstCombine, Reassociate, SROA and TailCallElim that
had not been updated earlier.
This switches everything to use the memory attribute proposed in
https://discourse.llvm.org/t/rfc-unify-memory-effect-attributes/65579.
The old argmemonly, inaccessiblememonly and inaccessiblemem_or_argmemonly
attributes are dropped. The readnone, readonly and writeonly attributes
are restricted to parameters only.
The old attributes are auto-upgraded both in bitcode and IR.
The bitcode upgrade is a policy requirement that has to be retained
indefinitely. The IR upgrade is mainly there so it's not necessary
to update all tests using memory attributes in this patch, which
is already large enough. We could drop that part after migrating
tests, or retain it longer term, to make it easier to import IR
from older LLVM versions.
High-level Function/CallBase APIs like doesNotAccessMemory() or
setDoesNotAccessMemory() are mapped transparently to the memory
attribute. Code that directly manipulates attributes (e.g. via
AttributeList) on the other hand needs to switch to working with
the memory attribute instead.
Differential Revision: https://reviews.llvm.org/D135780
Varargs and inalloca have a weird interaction where varargs are actually
passed via the inalloca alloca. Removing inalloca breaks the varargs
because they're still not passed as separate arguments.
Fixes#58718
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D137182
Disallow this meaningless combination. Doing so simplifies analysis
of LLVM code w.r.t t DLL storage-class, and prevents mistakes with
DLL storage class.
- Change the assembler to reject DLL storage class on symbols with
local linkage.
- Change the bitcode reader to clear the DLL Storage class when the
linkage is local for auto-upgrading
- Update LangRef.
There is an existing restriction on non-default visibility and local
linkage which this is modelled on.
Differential Review: https://reviews.llvm.org/D134784
hasOnlyColdCalls skipped over calls to intrinsics, but it did so after
checking the linkage of the called function. This meant that the presence
of a call to a debug intrinsic could affect the outcome of the
optimization.
In my original reproducer (for an out of tree target) it was particularly
interesting, because the actual IR after GlobalOpt was not different with
debug instrinsics present, so -print-after-all printouts didn't show
anything there.
However, without debuginfo, GlobalOpt went further and ran
BlockFrequencyAnalysis and (more importanly) LoopAnalysis, and later on in
the pipeline, instcombine behaved in different ways when LoopInfo was
present.
So a call to a dbg.declare prevented running LoopAnalysis in
GlobalOpt, which later prevented InstCombine from doing an optimization.
The dbg-intrinsic-loopanalysis.ll testcase tries to expose this.
Then I also noted that adding a dbg.declare actually made the existing
testcase colccc_coldsites.ll generate different code, so I modified that
to now test it behaves the same way with and without the dbg.declare.
Reviewed By: nikic, fhahn
Differential Revision: https://reviews.llvm.org/D133193
The SROA algorithm won't work for Scalable Vectors, since we don't
know how many bytes are loaded/stored. Bail out if a Scalable
Vector is seen.
Differential Revision: https://reviews.llvm.org/D132417
As my goal is to remove at least _some_ functions from the static list
in MemoryBuiltins.cpp, these tests either need to run inferattrs or
statically declare these attributes to keep passing. A couple of tests
had alternate cases which are no longer meaningful, e.g.
`malloc-load-removal.ll`.
Differential Revision: https://reviews.llvm.org/D123087
