Split off from D150398 to avoid builder-related diff changes there.
Using IRBuilder to create ICmps simplifies the result if both operands
are constants.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D158332
Add extra tests with cases where SCEV predicates can be proven to always
be false. The test in pointer-induction.ll has been adjusted to avoid
the induction always to wrap.
Update skeleton creation logic to use SCEV expansion results from
expanding the pre-header. This avoids another set of SCEV expansions
that may happen after the CFG has been modified.
Fixes#58811.
Depends on D147964.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D147965
This patch adds a new preheader block the VPlan to place SCEV expansions
expansions like the trip count. This preheader block is disconnected
at the moment, as the bypass blocks of the skeleton are not yet modeled
in VPlan.
The preheader block is executed before skeleton creation, so the SCEV
expansion results can be used during skeleton creation. At the moment,
the trip count expression and induction steps are expanded in the new
preheader. The remainder of SCEV expansions will be moved gradually in
the future.
D147965 will update skeleton creation to use the steps expanded in the
pre-header to fix#58811.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D147964
(JFYI - This has been heavily reframed since original attempt at landing.)
This change updates the InductionDescriptor logic to allow matching a pointer IV with a non-constant stride, but also updates the LoopVectorizer to bailout on such descriptors by default. This preserves the default vectorizer behavior.
In review, it was pointed out that there's multiple unfortunate performance implications which need to be addressed before this can be enabled. Having a flag allows us to exercise the behavior, and write test cases for logic which is otherwise unreachable (or hard to reach).
This will also enable non-constant stride pointer recurrences for other consumers. I've audited said code, and don't see any obvious issues.
Differential Revision: https://reviews.llvm.org/D147336
Check lines for some of these tests were regenerated. The difference
is that with opaque pointers SCEVExpander always emits i8 GEPs,
making the address calculation explicit. This is a known problem
that will be solved long term by making all address calculations
explicit.
optimizeInductions may leave dead recipes which can prevent sinking.
Sinking on the other hand should not introduce new dead recipes, so
clean up dead recipes before sinking.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D133762
Now that removeDeadRecipes can remove most dead recipes across a whole
VPlan, there is no need to first collect some dead instructions.
Instead removeDeadRecipes can simply clean them up.
Depends D127580.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D128408
Update a bunch of loop-vectorize regression tests to use the new PM
syntax (opt -passes=loop-vectorize) instead of the deprecated legacy
PM syntax (opt -loop-vectorize).
This reverts the revert commit ff93260bf6bddfbad1fa65c4d5184988885b900f.
The underlying issue causing the PPC bot failures has been fixed in
cbaac1473403 and a corresponding test case has been added in
ad2cad1c521c.
Original message:
This patch adds a new VPScalarIVStepsRecipe to handle building scalar
steps.
In the first patch, it only handles the case where there is no vector
induction variable needed.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D115953
This patch adds a new VPScalarIVStepsRecipe to handle building scalar
steps.
In the first patch, it only handles the case where there is no vector
induction variable needed.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D115953
This patch adds a new transform to remove dead recipes. For now, it only
removes dead recipes in the header, to keep the number tests that require
updating manageable. Future patches will extend this to remove dead
recipes across the whole plan.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D118051
At the moment, the primary induction variable for the vector loop is
created as part of the skeleton creation. This is tied to creating the
vector loop latch outside of VPlan. This prevents from modeling the
*whole* vector loop in VPlan, which in turn is required to model
preheader and exit blocks in VPlan as well.
This patch introduces a new recipe VPCanonicalIVPHIRecipe to represent the
primary IV in VPlan and CanonicalIVIncrement{NUW} opcodes for
VPInstruction to model the increment.
This allows us to partly retire createInductionVariable. At the moment,
a bit of patching up is done after executing all blocks in the plan.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D113223
collectLoopScalars should only add non-uniform nodes to the list if they
are used by a load/store instruction that is marked as CM_Scalarize.
Before this patch, the LV incorrectly marked pointer induction variables
as 'scalar' when they required to be widened by something else,
such as a compare instruction, and weren't used by a node marked as
'CM_Scalarize'. This case is covered by sve-widen-phi.ll.
This change also allows removing some code where the LV tried to
widen the PHI nodes with a stepvector, even though it was marked as
'scalarAfterVectorization'. Now that this code is more careful about
marking instructions that need widening as 'scalar', this code has
become redundant.
Differential Revision: https://reviews.llvm.org/D114373
Clang OpenMP codegen tests are failing.
This reverts commit 288f1f8abe5835180a0021f142043ee261ab3846.
This reverts commit cb90e5356ac1594e95fed8e208d6e0e9b6a87db1.
There's precedent for that in `CreateOr()`/`CreateAnd()`.
The motivation here is to avoid bloating the run-time check's IR
in `SCEVExpander::generateOverflowCheck()`.
Refs. https://reviews.llvm.org/D109368#3089809
This fixes an issue that was found in D105199, where a GEP instruction
is used both as the address of a store, as well as the value of a store.
For the former, the value is scalar after vectorization, but the latter
(as value) requires widening.
Other code in that function seems to prevent similar cases from happening,
but it seems this case was missed.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D106164
A backedge-taken count doesn't refer to memory; returning a pointer type
is nonsense. So make sure we always return an integer.
The obvious way to do this would be to just convert the operands of the
icmp to integers, but that doesn't quite work out at the moment:
isLoopEntryGuardedByCond currently gets confused by ptrtoint operations.
So we perform the ptrtoint conversion late for lt/gt operations.
The test changes are mostly innocuous. The most interesting changes are
more complex SCEV expressions of the form "(-1 * (ptrtoint i8* %ptr to
i64)) + %ptr)". This is expected: we can't fold this to zero because we
need to preserve the pointer base.
The call to isLoopEntryGuardedByCond in howFarToZero is less precise
because of ptrtoint operations; this shows up in the function
pr46786_c26_char in ptrtoint.ll. Fixing it here would require more
complex refactoring. It should eventually be fixed by future
improvements to isImpliedCond.
See https://bugs.llvm.org/show_bug.cgi?id=46786 for context.
Differential Revision: https://reviews.llvm.org/D103656
This patch marks the induction increment of the main induction variable
of the vector loop as NUW when not folding the tail.
If the tail is not folded, we know that End - Start >= Step (either
statically or through the minimum iteration checks). We also know that both
Start % Step == 0 and End % Step == 0. We exit the vector loop if %IV +
%Step == %End. Hence we must exit the loop before %IV + %Step unsigned
overflows and we can mark the induction increment as NUW.
This should make SCEV return more precise bounds for the created vector
loops, used by later optimizations, like late unrolling.
At the moment quite a few tests still need to be updated, but before
doing so I'd like to get initial feedback to make sure I am not missing
anything.
Note that this could probably be further improved by using information
from the original IV.
Attempt of modeling of the assumption in Alive2:
https://alive2.llvm.org/ce/z/H_DL_g
Part of a set of fixes required for PR50412.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D103255
This reverts commit 329aeb5db43f5e69df038fb20d2def77fe6f8595,
and relands commit 61f006ac655431bd44b9e089f74c73bec0c1a48c.
This is a continuation of D89456.
As it was suggested there, now that SCEV models `PtrToInt`,
we can try to improve SCEV's pointer handling.
In particular, i believe, i will need this in the future
to further fix `SCEVAddExpr`operation type handling.
This removes special handling of `ConstantPointerNull`
from `ScalarEvolution::createSCEV()`, and add constant folding
into `ScalarEvolution::getPtrToIntExpr()`.
This way, `null` constants stay as such in SCEV's,
but gracefully become zero integers when asked.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D98147
This is a continuation of D89456.
As it was suggested there, now that SCEV models `PtrToInt`,
we can try to improve SCEV's pointer handling.
In particular, i believe, i will need this in the future
to further fix `SCEVAddExpr`operation type handling.
This removes special handling of `ConstantPointerNull`
from `ScalarEvolution::createSCEV()`, and add constant folding
into `ScalarEvolution::getPtrToIntExpr()`.
This way, `null` constants stay as such in SCEV's,
but gracefully become zero integers when asked.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D98147
This patch updates IRBuilder to create insertelement/shufflevector using poison as a placeholder.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93793
This patch enables the LoopVectorizer to build a phi of pointer
type and provide the vector loads and stores with vector type
getelementptrs built from the pointer induction variable, which
produces much less instructions than the previous approach of
creating scalar getelementpointers and glue them together to a
vector.
Differential Revision: https://reviews.llvm.org/D81267
