This patch adds a new runToBinaryEntry option which sets a one-shot breakpoint
at program entry. This option is useful for synchronizing module loading with
dynamic loader to measure debugger startup performance: when program entry
one-short breakpoint hits most of the dependency modules should have been
loaded so this provides a good sample point for debugger startup time.
More explicitly for lldb-vscode, when this option is enabled, "Initialized" DAP
event is synchronously sent after most dependency modules are loaded.
Differential Revision: https://reviews.llvm.org/D135798
Eliminate boilerplate of having each test manually assign to `mydir` by calling
`compute_mydir` in lldbtest.py.
Differential Revision: https://reviews.llvm.org/D128077
This is a modified version of a previous patch that was reverted: https://reviews.llvm.org/D119797
This version only waits for the process to stop when using "launchCommands" or "attachCommands"...
...and doesn't play with the async mode when doing normal launch/attach.
We discovered that when using "launchCommands" or "attachCommands" that there was an issue where these commands were not being run synchronously. There were further problems in this case where we would get thread events for the process that was just launched or attached before the IDE was ready, which is after "configurationDone" was sent to lldb-vscode.
This fix introduces the ability to wait for the process to stop after "launchCommands" or "attachCommands" are run to ensure that we have a stopped process point that is ready for the debug session to proceed. We spin up the thread that listens for process events before we start the launch or attach, but we don't want stop events being delivered through the DAP protocol until the "configurationDone" packet is received. We now always ignore the stop event with a stop ID of 1, which is the first stop. All normal launch and attach scenarios use the synchronous mode, and "launchCommands and "attachCommands" run an array of LLDB commands in async mode.
This should make our launch with "launchCommands" and attach with "attachCommands" avoid a race condition when the process is being launched or attached.
Differential Revision: https://reviews.llvm.org/D120755
We discovered that when using "launchCommands" or "attachCommands" that there was an issue where these commands were not being run synchronously. There were further problems in this case where we would get thread events for the process that was just launched or attached before the IDE was ready, which is after "configurationDone" was sent to lldb-vscode.
This fix introduces the ability to wait for the process to stop after the run or attach to ensure that we have a stopped process at the entry point that is ready for the debug session to proceed. This also allows us to run the normal launch or attach without needing to play with the async flag the debugger. We spin up the thread that listens for process events before we start the launch or attach, but we stop the first eStateStopped (with stop ID of zero) event from being delivered through the DAP protocol because the "configurationDone" request handler will deliver it manually as the IDE expects a stop after configuration done. The request_configurationDone will also only deliver the stop packet if the "stopOnEntry" is False in the launch configuration.
Also added a new "timeout" to the launch and attach launch configuration arguments that can be set and defaults to 30 seconds. Since we now poll to detect when the process is stopped, we need a timeout that can be changed in case certain workflows take longer that 30 seconds to attach. If the process is not stopped by the timeout, an error will be retured for the launch or attach.
Added a flag to the vscode.py protocol classes that detects and ensures that no "stopped" events are sent prior to "configurationDone" has been sent and will raise an error if it does happen.
This should make our launching and attaching more reliable and avoid some deadlocks that were being seen (https://reviews.llvm.org/D119548).
Differential Revision: https://reviews.llvm.org/D119797
This diff ass postRunCommands, which are the counterpart of the preRunCommands. TThey will be executed right after the target is launched or attached correctly, which means that the targets can assume that the target is running.
Differential Revision: https://reviews.llvm.org/D100340
This fixes flakiness in TestVSCode_launch.test_progress_events
vscode.progress_events some times failed to populate in time for
follow up iterations.
Adding a minor delay before the the for the loop fixes the issue.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D99497
LLDB can often appear deadlocked to users that use IDEs when it is indexing DWARF, or parsing symbol tables. These long running operations can make a debug session appear to be doing nothing even though a lot of work is going on inside LLDB. This patch adds a public API to allow clients to listen to debugger events that report progress and will allow UI to create an activity window or display that can show users what is going on and keep them informed of expensive operations that are going on inside LLDB.
Differential Revision: https://reviews.llvm.org/D97739
Summary:
test_terminate_commands is flaky on LLDB Arm buildbot as well. It was already
being skipped for aarch64. I am going to mark it skipped for Arm too.
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81978
Summary:
This redoes https://reviews.llvm.org/D79726 and fixes two things.
- The logic that determines whether to automatically disconnect during the tear down is not very dumb compared to the original implementation. Each test will determine whether to do that or not.
- The terminate commands and terminate event were being sent after the disconnect response was sent to the IDE. That was not good, as VSCode stops the debug session as soon as it receives a disconnect response. Now, the terminate event and terminateEvents are being executed before the disconnect response is sent. This ensures that any connection between the IDE and lldb-vscode is alive while the terminate commands are executed. Besides, it also allows displaying the output of the terminate commands on the debug console, as it's still alive.
Reviewers: clayborg, aadsm, kusmour, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81978
Summary: Adding this in line with "stopCommands" and "exitCommands" so that we can run commands at the end of the debugging session.
Reviewers: clayborg, wallace, labath
Reviewed By: clayborg, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D79726
Summary:
On Linux, when executing lldb-vscode on a remote machine, lldb-vscode doesn't die after the debug session ends. It keeps trying to read JSON input to no avail.
This diff indicates lldb-vscode to stop reading after a termination event has been processed.
Reviewers: clayborg, aadsm, kusmour
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76314
Summary:
The error message from the construct `assertTrue(a == b, "msg") ` are nearly always completely useless for actually debugging the issue.
This patch is just replacing this construct (and similar ones like `assertTrue(a != b, ...)` with the proper call to assertEqual or assertNotEquals.
This patch was mostly written by a shell script with some manual verification afterwards:
```
lang=python
import sys
def sanitize_line(line):
if line.strip().startswith("self.assertTrue(") and " == " in line:
line = line.replace("self.assertTrue(", "self.assertEquals(")
line = line.replace(" == ", ", ", 1)
if line.strip().startswith("self.assertTrue(") and " != " in line:
line = line.replace("self.assertTrue(", "self.assertNotEqual(")
line = line.replace(" != ", ", ", 1)
return line
for a in sys.argv[1:]:
with open(a, "r") as f:
lines = f.readlines()
with open(a, "w") as f:
for line in lines:
f.write(sanitize_line(line))
```
Reviewers: labath, JDevlieghere
Reviewed By: labath
Subscribers: abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74475
Summary: Moves lldbsuite tests to lldb/test/API.
This is a largely mechanical change, moved with the following steps:
```
rm lldb/test/API/testcases
mkdir -p lldb/test/API/{test_runner/test,tools/lldb-{server,vscode}}
mv lldb/packages/Python/lldbsuite/test/test_runner/test lldb/test/API/test_runner
for d in $(find lldb/packages/Python/lldbsuite/test/* -maxdepth 0 -type d | egrep -v "make|plugins|test_runner|tools"); do mv $d lldb/test/API; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-vscode -maxdepth 1 -mindepth 1 | grep -v ".py"); do mv $d lldb/test/API/tools/lldb-vscode; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-server -maxdepth 1 -mindepth 1 | egrep -v "gdbremote_testcase.py|lldbgdbserverutils.py|socket_packet_pump.py"); do mv $d lldb/test/API/tools/lldb-server; done
```
lldb/packages/Python/lldbsuite/__init__.py and lldb/test/API/lit.cfg.py were also updated with the new directory structure.
Reviewers: labath, JDevlieghere
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71151
