This is not a correctness fix because the set is only used for debug
output. However, it helps avoid noise when looking at diffs between
compiler runs.
The set is only maintained with debug output enabled, so the added cost
should be acceptable.
Differential Revision: https://reviews.llvm.org/D139465
Salvage debug info of instruction that is about to be deleted as dead in
Combiner pass. Currently supported instructions are COPY and G_TRUNC.
It allows to salvage debug info of some dead arguments of functions, by putting
DWARF expression corresponding to the instruction being deleted into related
DBG_VALUE instruction.
Here is an example of missing variables location https://godbolt.org/z/K48osb9dK.
We see that arguments x, y of function foo are not available in debugger, and
corresponding DBG_VALUE instructions have undefined register operand instead of
variables locaton after Aarch64PreLegalizerCombiner pass. The reason is that
registers where variables are located are removed as dead (with instruction
G_TRUNC). We can use salvageDebugInfo analogue for gMIR to preserve debug
locations of dead variables.
Statistics of llvm object files built with vs without this commit on -O2
optimization level (CMAKE_BUILD_TYPE=RelWithDebInfo, -fglobal-isel) on Aarch64 (macOS):
Number of variables with 100% of parent scope covered by DW_AT_location has been increased by 7,9%.
Number of variables with 0% coverage of parent scope has been decreased by 1,2%.
Number of variables processed by location statistics has been increased by 2,9%.
Average PC ranges coverage has been increased by 1,8 percentage points.
Coverage can be improved by supporting more instructions, or by calling
salvageDebugInfo for instructions that are deleted during Combiner rules exection.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D129909
Expanding on D109750.
Since `DBG_VALUE` instructions have final register validity determined in
`LDVImpl::handleDebugValue`, there is no apparent reason to immediately prune
unused register operands as their defs are erased. Consequently, this renders
`MachineInstr::eraseFromParentAndMarkDBGValuesForRemoval` moot; gaining a
substantial performance improvement.
The only necessary changes involve making relevant passes consider invalid
DBG_VALUE vregs uses as valid.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D112852
With gcc 6.3.0, I hit the following compilation error:
../lib/CodeGen/GlobalISel/Combiner.cpp: In member function
‘bool llvm::Combiner::combineMachineInstrs(llvm::MachineFunction&,
llvm::GISelCSEInfo*)’:
../lib/CodeGen/GlobalISel/Combiner.cpp:156:54: error: suggest parentheses
around ‘&&’ within ‘||’ [-Werror=parentheses]
assert(!CSEInfo || !errorToBool(CSEInfo->verify()) &&
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~
"CSEInfo is not consistent. Likely missing calls to "
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"observer on mutations");
Fix the code as suggested by the compiler.
https://reviews.llvm.org/D86676
Sometimes we can have the following code
x:gpr(s32) = G_OP
Say we build G_OP2 to the same x and then delete the previous instruction. Using something like
Register X = ...;
auto NewMIB = CSEBuilder.buildOp2(X, ... args);
Currently there's a mismatch in how NewMIB is profiled and inserted into the CSEMap (ie it doesn't consider register bank/register class along with type).Unify the profiling by refactoring and calling the common method.
This was found by turning on the CSEInfo::verify in at the end of each of our GISel passes which turns inconsistent state/non determinism in CSEing into crashes which likely usually indicates missing calls to Observer on mutations (the most common case). Here non determinism usually means not cseing sometimes, but almost never about producing incorrect code.
Also this patch adds this verification at the end of the combiners as well.
Summary:
Each generated helper can be configured to generate an option that disables
rules in that helper. This can be used to bisect rulesets.
The disable bits are stored in a SparseVector as this is very cheap for the
common case where nothing is disabled. It gets more expensive the more rules
are disabled but you're generally doing that for debug purposes where
performance is less of a concern.
Depends on D68426
Reviewers: volkan, bogner
Reviewed By: volkan
Subscribers: hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68438
llvm-svn: 375067
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
https://reviews.llvm.org/D58073
Speed up insertion during the initial populating phase into the
GISelWorkList by deferring repeatedly resizing the DenseMap.
This results in ~10% improvement in the combiner passes, and
~3% speedup in the Legalizer.
reviewed by: aemerson.
llvm-svn: 354093
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
https://reviews.llvm.org/D52803
This patch adds support to continuously CSE instructions during
each of the GISel passes. It consists of a GISelCSEInfo analysis pass
that can be used by the CSEMIRBuilder.
llvm-svn: 351283
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
Summary:
In addition to knowing that an instruction is changed. It's also useful to
know when it's about to change. For example, it might print the instruction so
you can track the changes in a debug log, it might remove it from some queue
while it's being worked on, or it might want to change several instructions as
a single transaction and act on all the changes at once.
Added changingInstr() to all existing uses of changedInstr()
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55623
llvm-svn: 348992
Summary:
There's little of interest that can be done to an already-erased instruction.
You can't inspect it, write it to a debug log, etc. It ought to be notification
that we're about to erase it. Rename the function to clarify the timing of the
event and reflect current usage.
Also fixed one case where we were trying to print an erased instruction.
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55611
llvm-svn: 348976
https://reviews.llvm.org/D54980
This provides a standard API across GISel passes to observe and notify
passes about changes (insertions/deletions/mutations) to MachineInstrs.
This patch also removes the recordInsertion method in MachineIRBuilder
and instead provides method to setObserver.
Reviewed by: vkeles.
llvm-svn: 348406
Summary: Depends on D45541
Reviewers: ab, aditya_nandakumar, bogner, rtereshin, volkan, rovka, javed.absar, aemerson
Subscribers: aemerson, rengolin, mgorny, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45543
The previous commit failed portions of the test-suite on GreenDragon due to
duplicate COPY instructions and iterator invalidation. Both issues have now
been fixed. To assist with this, a helper (cloneVirtualRegister) has been added
to MachineRegisterInfo that can be used to get another register that has the same
type and class/bank as an existing one.
llvm-svn: 343654
There's a strange assertion on two of the Green Dragon bots that goes away when
this is reverted. The assertion is in RegBankAlloc and if it is this commit then
-verify-machine-instrs should have caught it earlier in the pipeline.
llvm-svn: 343546
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
https://reviews.llvm.org/D41373
The various components are
GICombinerHelper contains transformations that are common to all
targets. Targets can pick and choose which transformations (at
function/opcode granularity) each pass uses via configuring a
GICombinerInfo.
GICombiner contains some common code and it does the traversal,
driving of combines, worklist management and iterating until
convergence.
GICombinerInfo is an interface with a virtual method called combine.
The combiner info will allow targets to pick and choose (or
implement their own specific combines). CombineInfos can make
use of available combines in GICombineHelper to configure the
transformations for a particular pass. Currently this approach allows
cherry picking transformations from helpers (at function/opcode
granularity) and also allows early returning on specific
transformations. Targets also get to prioritize whether target specific
combines run before/after the opt-in generic combines. Ideally we would
like this part to be configured by both C++ and Tablegen. The
CombinerInfo also has a field which indicates how to deal with
IllegalOps (ie - should we allow to create them/or legalize them?).
A CombinerPass would configure a CombinerInfo, create the GICombiner
with the Info, and call
GICombiner::combineMachineInstrs(MachineFunction&).
This organization is very similar to the GISelLegalizer.
llvm-svn: 323392
