This patch introduces the `vector.mask` operation and the MaskableOpInterface
as described in https://discourse.llvm.org/t/rfc-vector-masking-representation-in-mlir/64964.
The `vector.mask` operation is used to predicate the execution of operations
implementing the MaskableOpInterface. This interface will be implemented by maskable
operations and provides information about its masking constraints and semantics.
For now, only vector transfer and reduction ops implement the MaskableOpInterface
for illustration and testing purposes.
Reviewed By: nicolasvasilache, rriddle
Differential Revision: https://reviews.llvm.org/D134939
CombiningKind was implemented before EnumAttr, so it reimplements the same behaviour with the custom code. Except for a few places, EnumAttr is a drop-in replacement.
Reviewed By: nicolasvasilache, pifon2a
Differential Revision: https://reviews.llvm.org/D133343
Currently vector.gather only supports reading memory into a 1-D result vector.
This patch extends it to support an n-D result vector with the indices, masks,
and passthroughs in n-D vectors.
As we are trying to vectorize tensor.extract with vector.gather
(https://github.com/iree-org/iree/issues/9198), it will need to gather the
elements into an n-D vector. Having vector.gather with n-D results allows us
to avoid flatten and reshape at the vectorization stage. The backends can then
decide the optimal ways to lower the vector.gather op.
Note that this is different from n-D gathering, which is about reading n-D
memory with the n-D indices. The indices here are still only 1-D offsets on
the base.
Reviewed By: dcaballe
Differential Revision: https://reviews.llvm.org/D131905
This allows vectorizing linalg reductions without changing the operation
order. Therefore this produce a valid vectorization even if operations
are not associative.
Differential Revision: https://reviews.llvm.org/D129535
Adding the accumulator value after the `vector.contract` changes the
precision of the operation. This makes sure the accumulator is carried
through to `vector.reduce` (and down to LLVM).
Differential Revision: https://reviews.llvm.org/D128674
This patch adds check of supported reduction kind for ScanOp to avoid using and/or/xor for floating point type.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D123977
The way vector.create_mask is currently lowered is
vector-length-dependent, and therefore incompatible with scalable vector
types. This patch adds an alternative lowering path for create_mask
operations that return a scalable vector mask.
Differential Revision: https://reviews.llvm.org/D118248
This is a bit awkward since ExtractOp allows both `f32` and
`vector<1xf32>` results for a scalar extraction. Allow both, but make
inference return the scalar to make this as NFC as possible.
This is part of the larger effort to split the standard dialect. This will also allow for pruning some
additional dependencies on Standard (done in a followup).
Differential Revision: https://reviews.llvm.org/D118202
This patch adds the vector.scan op which computes the
scan for a given n-d vector. It requires specifying the operator,
the identity element and whether the scan is inclusive or
exclusive.
TEST: Added test in ops.mlir
Reviewed By: ThomasRaoux
Differential Revision: https://reviews.llvm.org/D117171
The 0-D case gets lowered in almost the same way that the 1-D case does
in VectorCreateMaskOpConversion. I also had to slightly update the
verifier for the op to always require exactly 1 operand in the 0-D case.
Depends On D115220
Reviewed by: ftynse
Differential revision: https://reviews.llvm.org/D115221
The new form of printing attribute in the declarative assembly is eliding the `#dialect.mnemonic` prefix to only keep the `<....>` part.
Differential Revision: https://reviews.llvm.org/D113873
To support creating both a mask with just a single `true` and `false` values,
I had to relax the restriction in the verifier that the rank is always equal to
the length of the attribute array, in other words, we now allow:
- `vector.constant_mask [0] : vector<i1>` which gets lowered to
`arith.constant dense<false> : vector<i1>`
- `vector.constant_mask [1] : vector<i1>` which gets lowered to
`arith.constant dense<true> : vector<i1>`
(the attribute list for the 0-D case must be a singleton containing
either `0` or `1`)
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D115023
The implementation only allows to bit-cast between two 0-D vectors. We could
probably support casting from/to vectors like `vector<1xf32>`, but I wasn't
convinced that this would be important and it would require breaking the
invariant that `BitCastOp` works only on vectors with equal rank.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D114854
This revision adds 0-d vector support to vector.transfer ops.
In the process, numerous cleanups are applied, in particular around normalizing
and reducing the number of builders.
Reviewed By: ThomasRaoux, springerm
Differential Revision: https://reviews.llvm.org/D114803
This revision makes concrete use of 0-d vectors to extend the semantics of
InsertElementOp.
Reviewed By: dcaballe, pifon2a
Differential Revision: https://reviews.llvm.org/D114388
This revision starts making concrete use of 0-d vectors to extend the semantics of
ExtractElementOp.
In the process a new VectorOfAnyRank Tablegen OpBase.td is added to allow progressive transition to supporting 0-d vectors by gradually opting in.
Differential Revision: https://reviews.llvm.org/D114387
The change is based on the proposal from the following discussion:
https://llvm.discourse.group/t/rfc-memreftype-affine-maps-list-vs-single-item/3968
* Introduce `MemRefLayoutAttr` interface to get `AffineMap` from an `Attribute`
(`AffineMapAttr` implements this interface).
* Store layout as a single generic `MemRefLayoutAttr`.
This change removes the affine map composition feature and related API.
Actually, while the `MemRefType` itself supported it, almost none of the upstream
can work with more than 1 affine map in `MemRefType`.
The introduced `MemRefLayoutAttr` allows to re-implement this feature
in a more stable way - via separate attribute class.
Also the interface allows to use different layout representations rather than affine maps.
For example, the described "stride + offset" form, which is currently supported in ASM parser only,
can now be expressed as separate attribute.
Reviewed By: ftynse, bondhugula
Differential Revision: https://reviews.llvm.org/D111553
Precursor: https://reviews.llvm.org/D110200
Removed redundant ops from the standard dialect that were moved to the
`arith` or `math` dialects.
Renamed all instances of operations in the codebase and in tests.
Reviewed By: rriddle, jpienaar
Differential Revision: https://reviews.llvm.org/D110797
This revision updates the op semantics, printer, parser and verifier to allow 0-d transfers.
Until 0-d vectors are available, such transfers have a special form that transits through vector<1xt>.
This is a stepping stone towards the longer term work of adding 0-d vectors and will help significantly reduce corner cases in vectorization.
Transformations and lowerings do not yet support this form, extensions will follow.
Differential Revision: https://reviews.llvm.org/D111559
This patch extends Linalg core vectorization with support for min/max reductions
in linalg.generic ops. It enables the reduction detection for min/max combiner ops.
It also renames MIN/MAX combining kinds to MINS/MAXS to make the sign explicit for
floating point and signed integer types. MINU/MAXU should be introduce din the future
for unsigned integer types.
Reviewed By: pifon2a, ThomasRaoux
Differential Revision: https://reviews.llvm.org/D110854
This simplifies the vector to LLVM lowering. Previously, both vector.load/store and vector.transfer_read/write lowered directly to LLVM. With this commit, there is a single path to LLVM vector load/store instructions and vector.transfer_read/write ops must first be lowered to vector.load/store ops.
* Remove vector.transfer_read/write to LLVM lowering.
* Allow non-unit memref strides on all but the most minor dimension for vector.load/store ops.
* Add maxTransferRank option to populateVectorTransferLoweringPatterns.
* vector.transfer_reads with changing element type can no longer be lowered to LLVM. (This functionality is needed only for SPIRV.)
Differential Revision: https://reviews.llvm.org/D106118
Simplify vector unrolling pattern to be more aligned with rest of the
patterns and be closer to vector distribution.
The new implementation uses ExtractStridedSlice/InsertStridedSlice
instead of the Tuple ops. After this change the ops based on Tuple don't
have any more used so they can be removed.
This allows removing signifcant amount of dead code and will allow
extending the unrolling code going forward.
Differential Revision: https://reviews.llvm.org/D105381
Broadcast dimensions of vector transfer ops are always in-bounds. This is consistent with the fact that the starting position of a transfer is always in-bounds.
Differential Revision: https://reviews.llvm.org/D102566
Broadcast dimensions of a vector transfer op have no corresponding dimension in the mask vector. E.g., a 2-D TransferReadOp, where one dimension is a broadcast, can have a 1-D `mask` attribute.
This commit also adds a few additional transfer op integration tests for various combinations of broadcasts, masking, dim transposes, etc.
Differential Revision: https://reviews.llvm.org/D101745
The current implementation allows for TransferWriteOps with broadcasts that do not make sense. E.g., a broadcast could write a vector into a single (scalar) memory location, which is effectively the same as writing only the last element of the vector.
Differential Revision: https://reviews.llvm.org/D100842
This is in preparation for adding a new "mask" operand. The existing "masked" attribute was used to specify dimensions that may be out-of-bounds. Such transfers can be lowered to masked load/stores. The new "in_bounds" attribute is used to specify dimensions that are guaranteed to be within bounds. (Semantics is inverted.)
Differential Revision: https://reviews.llvm.org/D99639
Similar to mask-load/store and compress/expand, the gather and
scatter operation now allow for higher dimension uses. Note that
to support the mixed-type index, the new syntax is:
vector.gather %base [%i,%j] [%kvector] ....
The first client of this generalization is the sparse compiler,
which needs to define scatter and gathers on dense operands
of higher dimensions too.
Reviewed By: bixia
Differential Revision: https://reviews.llvm.org/D97422
Align the vector gather/scatter/expand/compress API with
the vector load/store/maskedload/maskedstore API.
Reviewed By: aartbik
Differential Revision: https://reviews.llvm.org/D96396
This patch adds the 'vector.load' and 'vector.store' ops to the Vector
dialect [1]. These operations model *contiguous* vector loads and stores
from/to memory. Their semantics are similar to the 'affine.vector_load' and
'affine.vector_store' counterparts but without the affine constraints. The
most relevant feature is that these new vector operations may perform a vector
load/store on memrefs with a non-vector element type, unlike 'std.load' and
'std.store' ops. This opens the representation to model more generic vector
load/store scenarios: unaligned vector loads/stores, perform scalar and vector
memory access on the same memref, decouple memory allocation constraints from
memory accesses, etc [1]. These operations will also facilitate the progressive
lowering of both Affine vector loads/stores and Vector transfer reads/writes
for those that read/write contiguous slices from/to memory.
In particular, this patch adds the 'vector.load' and 'vector.store' ops to the
Vector dialect, implements their lowering to the LLVM dialect, and changes the
lowering of 'affine.vector_load' and 'affine.vector_store' ops to the new vector
ops. The lowering of Vector transfer reads/writes will be implemented in the
future, probably as an independent pass. The API of 'vector.maskedload' and
'vector.maskedstore' has also been changed slightly to align it with the
transfer read/write ops and the vector new ops. This will improve reusability
among all these operations. For example, the lowering of 'vector.load',
'vector.store', 'vector.maskedload' and 'vector.maskedstore' to the LLVM dialect
is implemented with a single template conversion pattern.
[1] https://llvm.discourse.group/t/memref-type-and-data-layout/
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D96185
This ensures the memref base + indices expression is well-formed
Reviewed By: ThomasRaoux, ftynse
Differential Revision: https://reviews.llvm.org/D94441
This change makes the scatter/gather syntax more consistent with
the syntax of all the other memory operations in the Vector dialect
(order of types, use of [] for index, etc.). This will make the MLIR
code easier to read. In addition, the pass_thru parameter of the
gather has been made mandatory (there is very little benefit in
using the implicit "undefined" values).
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D94352
Adding the ability to index the base address brings these operations closer
to the transfer read and write semantics (with lowering advantages), ensures
more consistent use in vector MLIR code (easier to read), and reduces the
amount of code duplication to lower memrefs into base addresses considerably
(making codegen less error-prone).
Reviewed By: ThomasRaoux
Differential Revision: https://reviews.llvm.org/D94278
Transfer_ops can now work on both buffers and tensor. Right now, lowering of
the tensor case is not supported yet.
Differential Revision: https://reviews.llvm.org/D93500
