First the leak sanitizer has to be disabled, as even an empty script
leads to leak detection with Python.
Then we need to preload the ASAN runtime, as the main binary (python)
won't be linked against it. This will only work on Linux right now.
Differential Revision: https://reviews.llvm.org/D111004
This is an important core dialect that has not been exposed previously. Set up
the default bindings generation and provide a nicer wrapper for the `for` loop
with access to the loop configuration and body.
Depends On D110758
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D110759
Without this change, these attributes can only be accessed through the generic
operation attribute dictionary provided the caller knows the special operation
attribute names used for this purpose. Add some Python wrapping to support this
use case.
Also provide access to function arguments usable inside the function along with
a couple of quality-of-life improvements in using block arguments (function
arguments being the arguments of its entry block).
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D110758
Enables putting types and attributes in sets and in dicts as keys.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D110301
Conversion to the LLVM dialect is being refactored to be more progressive and
is now performed as a series of independent passes converting different
dialects. These passes may produce `unrealized_conversion_cast` operations that
represent pending conversions between built-in and LLVM dialect types.
Historically, a more monolithic Standard-to-LLVM conversion pass did not need
these casts as all operations were converted in one shot. Previous refactorings
have led to the requirement of running the Standard-to-LLVM conversion pass to
clean up `unrealized_conversion_cast`s even though the IR had no standard
operations in it. The pass must have been also run the last among all to-LLVM
passes, in contradiction with the partial conversion logic. Additionally, the
way it was set up could produce invalid operations by removing casts between
LLVM and built-in types even when the consumer did not accept the uncasted
type, or could lead to cryptic conversion errors (recursive application of the
rewrite pattern on `unrealized_conversion_cast` as a means to indicate failure
to eliminate casts).
In fact, the need to eliminate A->B->A `unrealized_conversion_cast`s is not
specific to to-LLVM conversions and can be factored out into a separate type
reconciliation pass, which is achieved in this commit. While the cast operation
itself has a folder pattern, it is insufficient in most conversion passes as
the folder only applies to the second cast. Without complex legality setup in
the conversion target, the conversion infra will either consider the cast
operations valid and not fold them (a separate canonicalization would be
necessary to trigger the folding), or consider the first cast invalid upon
generation and stop with error. The pattern provided by the reconciliation pass
applies to the first cast operation instead. Furthermore, having a separate
pass makes it clear when `unrealized_conversion_cast`s could not have been
eliminated since it is the only reason why this pass can fail.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D109507
* It is pretty clear that no one has tried this yet since it was both incomplete and broken.
* Fixes a symbol hiding issues keeping even the generic builder from constructing an operation with successors.
* Adds ODS support for successors.
* Adds CAPI `mlirBlockGetParentRegion`, `mlirRegionEqual` + tests (and missing test for `mlirBlockGetParentOperation`).
* Adds Python property: `Block.region`.
* Adds Python methods: `Block.create_before` and `Block.create_after`.
* Adds Python property: `InsertionPoint.block`.
* Adds new blocks.py test to verify a plausible CFG construction case.
Differential Revision: https://reviews.llvm.org/D108898
The boilerplate was setting up some arrays for testing. To fully illustrate
python - MLIR potential, however, this data should also come from numpy land.
Reviewed By: bixia
Differential Revision: https://reviews.llvm.org/D108336
These operations are not lowered to from any source dialect and are only
used for redundant tests. Removing these named ops, along with their
associated tests, will make migration to YAML operations much more
convenient.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D107993
Using the python API to easily set up sparse kernels, this test
exhaustively builds, compilers, and runs SpMM for all annotations
on a sparse tensor, making sure every version generates the correct
result. This test also illustrates using the python API to set up
a sparse kernel and sparse compilation.
Reviewed By: bixia
Differential Revision: https://reviews.llvm.org/D107943
This test ensures that an error is generated from the Python side when running a module pass on a function. The test used to instantiate ViewOpGraph, however, this pass was changed into a general "any op" pass in D106253. Therefore, a different pass must be used in this test.
Differential Revision: https://reviews.llvm.org/D107424
* Adds source targets (not included in the full set that downstreams use by default) to bundle mlir-c/ headers into the mlir/_mlir_libs/include directory.
* Adds a minimal entry point to get include and library directories.
* Used by npcomp to export a full CAPI (which is then used by the Torch extension to link npcomp).
Reviewed By: mikeurbach
Differential Revision: https://reviews.llvm.org/D107090
* For python projects that don't need JIT/ExecutionEngine, cuts the number of files to compile roughly in half (with similar reduction in end binary size).
Differential Revision: https://reviews.llvm.org/D106992
Historically the builtin dialect has had an empty namespace. This has unfortunately created a very awkward situation, where many utilities either have to special case the empty namespace, or just don't work at all right now. This revision adds a namespace to the builtin dialect, and starts to cleanup some of the utilities to no longer handle empty namespaces. For now, the assembly form of builtin operations does not require the `builtin.` prefix. (This should likely be re-evaluated though)
Differential Revision: https://reviews.llvm.org/D105149
* Implements all of the discussed features:
- Links against common CAPI libraries that are self contained.
- Stops using the 'python/' directory at the root for everything, opening the namespace up for multiple projects to embed the MLIR python API.
- Separates declaration of sources (py and C++) needed to build the extension from building, allowing external projects to build custom assemblies from core parts of the API.
- Makes the core python API relocatable (i.e. it could be embedded as something like 'npcomp.ir', 'npcomp.dialects', etc). Still a bit more to do to make it truly isolated but the main structural reset is done.
- When building statically, installed python packages are completely self contained, suitable for direct setup and upload to PyPi, et al.
- Lets external projects assemble their own CAPI common runtime library that all extensions use. No more possibilities for TypeID issues.
- Begins modularizing the API so that external projects that just include a piece pay only for what they use.
* I also rolled in a re-organization of the native libraries that matches how I was packaging these out of tree and is a better layering (i.e. all libraries go into a nested _mlir_libs package). There is some further cleanup that I resisted since it would have required source changes that I'd rather do in a followup once everything stabilizes.
* Note that I made a somewhat odd choice in choosing to recompile all extensions for each project they are included into (as opposed to compiling once and just linking). While not leveraged yet, this will let us set definitions controlling the namespacing of the extensions so that they can be made to not conflict across projects (with preprocessor definitions).
* This will be a relatively substantial breaking change for downstreams. I will handle the npcomp migration and will coordinate with the circt folks before landing. We should stage this and make sure it isn't causing problems before landing.
* Fixed a couple of absolute imports that were causing issues.
Differential Revision: https://reviews.llvm.org/D106520
This deletes all the pooling ops in LinalgNamedStructuredOpsSpec.tc. All the
uses are replaced with the yaml pooling ops.
Reviewed By: gysit, rsuderman
Differential Revision: https://reviews.llvm.org/D106181
In cases where an operation has an argument or result named 'property', the
ODS-generated python fails on import because the `@property` resolves to the
`property` operation argument instead of the builtin `@property` decorator. We
should always use the fully qualified decorator name.
Reviewed By: mikeurbach
Differential Revision: https://reviews.llvm.org/D106106
After the MemRef has been split out of the Standard dialect, the
conversion to the LLVM dialect remained as a huge monolithic pass.
This is undesirable for the same complexity management reasons as having
a huge Standard dialect itself, and is even more confusing given the
existence of a separate dialect. Extract the conversion of the MemRef
dialect operations to LLVM into a separate library and a separate
conversion pass.
Reviewed By: herhut, silvas
Differential Revision: https://reviews.llvm.org/D105625
Introduce the exp and log function in OpDSL. Add the soft plus operator to test the emitted IR in Python and C++.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D105420
Add the min operation to OpDSL and introduce a min pooling operation to test the implementation. The patch is a sibling of the max operation patch https://reviews.llvm.org/D105203 and the min operation is again lowered to a compare and select pair.
Differential Revision: https://reviews.llvm.org/D105345
Introduce an integration test folder in the test/python subfolder and move the opsrun.py test into the newly created folder. The test verifies named operations end-to-end using both the yaml and the python path.
Differential Revision: https://reviews.llvm.org/D105276
Add the max operation to the OpDSL and introduce a max pooling operation to test the implementation. As MLIR has no builtin max operation, the max function is lowered to a compare and select pair.
Differential Revision: https://reviews.llvm.org/D105203
Extend the OpDSL syntax with an optional `domain` function to specify an explicit dimension order. The extension is needed to provide more control over the dimension order instead of deducing it implicitly depending on the formulation of the tensor comprehension. Additionally, the patch also ensures the symbols are ordered according to the operand definitions of the operation.
Differential Revision: https://reviews.llvm.org/D105117
Add an index_dim annotation to specify the shape to loop mapping of shape-only tensors. A shape-only tensor serves is not accessed withing the body of the operation but is required to span the iteration space of certain operations such as pooling.
Differential Revision: https://reviews.llvm.org/D104767
Extend the OpDSL with index attributes. After tensors and scalars, index attributes are the third operand type. An index attribute represents a compile-time constant that is limited to index expressions. A use cases are the strides and dilations defined by convolution and pooling operations.
The patch only updates the OpDSL. The C++ yaml codegen is updated by a followup patch.
Differential Revision: https://reviews.llvm.org/D104711
The patch changes the pretty printed FillOp operand order from output, value to value, output. The change is a follow up to https://reviews.llvm.org/D104121 that passes the fill value using a scalar input instead of the former capture semantics.
Differential Revision: https://reviews.llvm.org/D104356
This patch changes the (not recommended) static registration API from:
static PassRegistration<MyPass> reg("my-pass", "My Pass Description.");
to:
static PassRegistration<MyPass> reg;
And the explicit registration from:
void registerPass("my-pass", "My Pass Description.",
[] { return createMyPass(); });
To:
void registerPass([] { return createMyPass(); });
It is expected that Pass implementations overrides the getArgument() method
instead. This will ensure that pipeline description can be printed and parsed
back.
Differential Revision: https://reviews.llvm.org/D104421
The patch replaces the existing capture functionality by scalar operands that have been introduced by https://reviews.llvm.org/D104109. Scalar operands behave as tensor operands except for the fact that they are not indexed. As a result ScalarDefs can be accessed directly as no indexing expression is needed.
The patch only updates the OpDSL. The C++ side is updated by a follow up patch.
Differential Revision: https://reviews.llvm.org/D104220
Add support to Python bindings for the MLIR execution engine to load a
specified list of shared libraries - for eg. to use MLIR runtime
utility libraries.
Differential Revision: https://reviews.llvm.org/D104009
The patch extends the yaml code generation to support the following new OpDSL constructs:
- captures
- constants
- iteration index accesses
- predefined types
These changes have been introduced by revision
https://reviews.llvm.org/D101364.
Differential Revision: https://reviews.llvm.org/D102075
First set of "boilerplate" to get sparse tensor
passes available through CAPI and Python.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D102362
* The PybindAdaptors.h file has been evolving across different sub-projects (npcomp, circt) and has been successfully used for out of tree python API interop/extensions and defining custom types.
* Since sparse_tensor.encoding is the first in-tree custom attribute we are supporting, it seemed like the right time to upstream this header and use it to define the attribute in a way that we can support for both in-tree and out-of-tree use (prior, I had not wanted to upstream dead code which was not used in-tree).
* Adapted the circt version of `mlir_type_subclass`, also providing an `mlir_attribute_subclass`. As we get a bit of mileage on this, I would like to transition the builtin types/attributes to this mechanism and delete the old in-tree only `PyConcreteType` and `PyConcreteAttribute` template helpers (which cannot work reliably out of tree as they depend on internals).
* Added support for defaulting the MlirContext if none is passed so that we can support the same idioms as in-tree versions.
There is quite a bit going on here and I can split it up if needed, but would prefer to keep the first use and the header together so sending out in one patch.
Differential Revision: https://reviews.llvm.org/D102144
* NFC but has some fixes for CMake glitches discovered along the way (things not cleaning properly, co-mingled depends).
* Includes previously unsubmitted fix in D98681 and a TODO to fix it more appropriately in a smaller followup.
Differential Revision: https://reviews.llvm.org/D101493
