Now, that we have funnel shift intrinsics, it should be safe to convert this form of rotate to it.
In the worst case (a target that doesn't have rotate instructions), we will expand this into a
branch-less sequence of ALU ops (neg/and/and/lshr/shl/or) in the backend, so it's still very
likely to be a perf improvement over the original code.
The motivating source code pattern for this is shown in:
https://bugs.llvm.org/show_bug.cgi?id=34924
Background:
I looked at several different options before deciding where to try this - instcombine, simplifycfg,
CGP - because it doesn't fit cleanly anywhere AFAIK.
The backend (CGP, SDAG, GlobalIsel?) is too late for what we're trying to accomplish. We want to
have the IR converted before we reach things like vectorization because the reduced code can make a
loop much simpler to transform.
Technically, this could be included in instcombine, but it's a large pattern match that includes
control-flow, so it just felt wrong to stuff into there (although I have a draft of that patch).
Similarly, this could be part of simplifycfg, but all of this pattern matching is a stretch.
So we're left with our relatively new dumping ground for homeless transforms: aggressive-instcombine.
This only runs at -O3, but that seems like a reasonable limitation given that source code has many
options to avoid this pattern (including the recently added clang intrinsics for rotates).
I'm including a PhaseOrdering test because we require the teamwork of 3 passes (aggressive-instcombine,
instcombine, simplifycfg) to get this into the minimal IR form that we want. That test shows a bug
with the new pass manager that's independent of this change (but it will be masked if we canonicalize
harder to funnel shift intrinsics in instcombine).
Differential Revision: https://reviews.llvm.org/D55604
llvm-svn: 349396
The problem is shown specifically for a case with vector multiply here:
https://bugs.llvm.org/show_bug.cgi?id=40032
...and this might mask the original backend bug for ARM shown in:
https://bugs.llvm.org/show_bug.cgi?id=39967
As the test diffs here show, we were (and probably still aren't) doing
these kinds of transforms in a principled way. We are producing more or
equal wide instructions than we started with in some cases, so we still
need to restrict/correct other transforms from overstepping.
If there are perf regressions from this change, we can either carve out
exceptions to the general IR rules, or improve the backend to do these
transforms when we know the transform is profitable. That's probably
similar to a change like D55448.
Differential Revision: https://reviews.llvm.org/D55744
llvm-svn: 349389
If a saturating add/sub has one constant operand, then we can
determine the possible range of outputs it can produce, and simplify
an icmp comparison based on that.
The implementation is based on a similar existing mechanism for
simplifying binary operator + icmps.
Differential Revision: https://reviews.llvm.org/D55735
llvm-svn: 349369
If a saturating add/sub with a constant operand is compared to
another constant, we should be able to determine that the condition
is always true/false in some cases (but currently don't).
llvm-svn: 349261
The current code relies on LeaderUseCount to determine if we can remove
an SSA copy, but in that the LeaderUseCount does not refer to the SSA
copy. If a SSA copy is a dominating leader, we use the operand as dominating
leader instead. This means we removed a user of a ssa copy and we should
decrement its use count, so we can remove the ssa copy once it becomes dead.
Fixes PR38804.
Reviewers: efriedma, davide
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D51595
llvm-svn: 349217
When converting dbg.declares, if the described value is a [s|z]ext,
refer to the ext directly instead of referring to its operand.
This fixes a narrowing bug (the debugger got the sign of a variable
wrong, see llvm.org/PR35400).
The main reason to refer to the ext's operand was that an optimization
may remove the ext itself, leading to a dropped variable. Now that
InstCombine has been taught to use replaceAllDbgUsesWith (r336451), this
is less of a concern. Other passes can/should adopt this API as needed
to fix dropped variable bugs.
Differential Revision: https://reviews.llvm.org/D51813
llvm-svn: 349214
Optimization transformations are intentionally disabled by the 'optnone'
function attribute. Therefore do not warn if transformation metadata is
still present.
Using the legacy pass manager structure, the `skipFunction` method takes
care for the optnone attribute (already called before this patch). For
the new pass manager, there is no equivalent, so we check for the
'optnone' attribute manually.
Differential Revision: https://reviews.llvm.org/D55690
llvm-svn: 349184
The `changeToCall` function did not preserve the invoke's metadata.
Currently, there is probably no metadata that depends on being applied
on a CallInst or InvokeInst. Therefore we can replace the instruction's
metadata.
This fixes http://llvm.org/PR39994
Suggested-by: Moritz Kreutzer <moritz.kreutzer@siemens.com>
Differential Revision: https://reviews.llvm.org/D55666
llvm-svn: 349170
ProfileSampleAccurate is used to indicate the profile has exact match to the
code to be optimized.
Previously ProfileSampleAccurate is handled in ProfileSummaryInfo::isColdCallSite
and ProfileSummaryInfo::isColdBlock. A better solution is to initialize function
entry count to 0 when ProfileSampleAccurate is true, so we don't have to handle
ProfileSampleAccurate in multiple places.
Differential Revision: https://reviews.llvm.org/D55660
llvm-svn: 349088
Currently memcpyopt optimizes cases like
memset(a, byte, N);
memcpy(b, a, M);
to
memset(a, byte, N);
memset(b, byte, M);
if M <= N. Often this allows further simplifications down the line,
which drop the first memset entirely.
This patch extends this optimization for the case where M > N, but we
know that the bytes a[N..M] are undef due to alloca/lifetime.start.
This situation arises relatively often for Rust code, because Rust does
not initialize trailing structure padding and loves to insert redundant
memcpys. This also fixes https://bugs.llvm.org/show_bug.cgi?id=39844.
The previous version of this patch did not perform dependency checking
properly: While the dependency is checked at the position of the memset,
the used size must be that of the memcpy. Previously the size of the
memset was used, which missed modification in the region
MemSetSize..CopySize, resulting in miscompiles. The added tests cover
variations of this issue.
Differential Revision: https://reviews.llvm.org/D55120
llvm-svn: 349078
The actual type of the first argument of the @dbg intrinsic
doesn't really matter as we're setting it to `undef`, but the
bitcode reader is picky about `void` types.
llvm-svn: 349069
For anyone curious, the first test example is illustrative of a real code idiom produced by branching on the result of a three way comparison.
llvm-svn: 348997
When loops are deleted, we don't keep track of variables modified inside
the loops, so the DI will contain the wrong value for these.
e.g.
int b() {
int i;
for (i = 0; i < 2; i++)
;
patatino();
return a;
-> 6 patatino();
7 return a;
8 }
9 int main() { b(); }
(lldb) frame var i
(int) i = 0
We mark instead these values as unavailable inserting a
@llvm.dbg.value(undef to make sure we don't end up printing an incorrect
value in the debugger. We could consider doing something fancier,
for, e.g. constants, in the future.
PR39868.
rdar://problem/46418795)
Differential Revision: https://reviews.llvm.org/D55299
llvm-svn: 348988
This fixes https://bugs.llvm.org/show_bug.cgi?id=39908.
The evaluateGEPOffsetExpression() function simplifies GEP offsets for
use in comparisons against zero, basically by converting X*Scale+Offset==0
to X+Offset/Scale==0 if Scale divides Offset. However, before this is done,
Offset is masked down to the pointer size. This results in incorrect
results for negative Offsets, because we basically end up dividing the
32-bit offset *zero* extended to 64-bit bits (rather than sign extended).
Fix this by explicitly sign extending the truncated value.
Differential Revision: https://reviews.llvm.org/D55449
llvm-svn: 348987
As mentioned in D55604, there are 2 bugs here:
1. The new pass manager is speculating wildly by default.
2. The old pass manager is not converting this to funnel shift.
llvm-svn: 348980
Indices for getelementptr can be signed so we should use
getMinSignedBits instead of getActiveBits here. The function later calls
getSExtValue to get the int64_t value, which also checks
getMinSignedBits.
This fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=11647.
Reviewers: mssimpso, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D55536
llvm-svn: 348957
When multiple loop transformation are defined in a loop's metadata, their order of execution is defined by the order of their respective passes in the pass pipeline. For instance, e.g.
#pragma clang loop unroll_and_jam(enable)
#pragma clang loop distribute(enable)
is the same as
#pragma clang loop distribute(enable)
#pragma clang loop unroll_and_jam(enable)
and will try to loop-distribute before Unroll-And-Jam because the LoopDistribute pass is scheduled after UnrollAndJam pass. UnrollAndJamPass only supports one inner loop, i.e. it will necessarily fail after loop distribution. It is not possible to specify another execution order. Also,t the order of passes in the pipeline is subject to change between versions of LLVM, optimization options and which pass manager is used.
This patch adds 'followup' attributes to various loop transformation passes. These attributes define which attributes the resulting loop of a transformation should have. For instance,
!0 = !{!0, !1, !2}
!1 = !{!"llvm.loop.unroll_and_jam.enable"}
!2 = !{!"llvm.loop.unroll_and_jam.followup_inner", !3}
!3 = !{!"llvm.loop.distribute.enable"}
defines a loop ID (!0) to be unrolled-and-jammed (!1) and then the attribute !3 to be added to the jammed inner loop, which contains the instruction to distribute the inner loop.
Currently, in both pass managers, pass execution is in a fixed order and UnrollAndJamPass will not execute again after LoopDistribute. We hope to fix this in the future by allowing pass managers to run passes until a fixpoint is reached, use Polly to perform these transformations, or add a loop transformation pass which takes the order issue into account.
For mandatory/forced transformations (e.g. by having been declared by #pragma omp simd), the user must be notified when a transformation could not be performed. It is not possible that the responsible pass emits such a warning because the transformation might be 'hidden' in a followup attribute when it is executed, or it is not present in the pipeline at all. For this reason, this patche introduces a WarnMissedTransformations pass, to warn about orphaned transformations.
Since this changes the user-visible diagnostic message when a transformation is applied, two test cases in the clang repository need to be updated.
To ensure that no other transformation is executed before the intended one, the attribute `llvm.loop.disable_nonforced` can be added which should disable transformation heuristics before the intended transformation is applied. E.g. it would be surprising if a loop is distributed before a #pragma unroll_and_jam is applied.
With more supported code transformations (loop fusion, interchange, stripmining, offloading, etc.), transformations can be used as building blocks for more complex transformations (e.g. stripmining+stripmining+interchange -> tiling).
Reviewed By: hfinkel, dmgreen
Differential Revision: https://reviews.llvm.org/D49281
Differential Revision: https://reviews.llvm.org/D55288
llvm-svn: 348944
For SampleFDO, when a callsite doesn't appear in the profile, it will not be marked as cold callsite unless the option -profile-sample-accurate is specified.
But profile-sample-accurate doesn't cover function isFunctionColdInCallGraph which is used to decide whether a function should be put into text.unlikely section, so even if the user knows the profile is accurate and specifies profile-sample-accurate, those functions not appearing in the sample profile are still not be put into text.unlikely section right now.
The patch fixes that.
Differential Revision: https://reviews.llvm.org/D55567
llvm-svn: 348940
Without this check, we hit an assertion in getZExtValue, if the constant
value does not fit into an uint64_t.
As getZExtValue returns an uint64_t, should we update
getAggregateElement to take an uin64_t as well?
This fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=6109.
Reviewers: efriedma, craig.topper, spatel
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D55547
llvm-svn: 348906
Summary:
Enable suspend point simplification for cases where:
* coro.save and coro.suspend are in different basic blocks
* where there are intervening intrinsics
Reviewers: modocache, tks2103, lewissbaker
Reviewed By: modocache
Subscribers: EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D55160
llvm-svn: 348897
Struct types may have leading zero-size elements like [0 x i32], in
which case the "real" element at offset 0 will not necessarily coincide
with the 0th element of the aggregate. ConstantFoldLoadThroughBitcast()
wants to drill down the element at offset 0, but currently always picks
the 0th aggregate element to do so. This patch changes the code to find
the first non-zero-size element instead, for the struct case.
The motivation behind this change is https://github.com/rust-lang/rust/issues/48627.
Rust is fond of emitting [0 x iN] separators between struct elements to
enforce alignment, which prevents constant folding in this particular case.
The additional tests with [4294967295 x [0 x i32]] check that we don't
end up unnecessarily looping over a large number of zero-size elements
of a zero-size array.
Differential Revision: https://reviews.llvm.org/D55169
llvm-svn: 348895
It's currently not safe to outline landingpad instructions (see
llvm.org/PR39917). Like @llvm.eh.typeid.for, the order and content of
previous landingpad instructions in a function alters the lowering of
subsequent landingpads by renumbering type info ID's. Outlining a
landingpad therefore breaks exception handling & unwinding.
llvm-svn: 348870
call iM movmsk(sext <N x i1> X) --> zext (bitcast <N x i1> X to iN) to iM
This has the potential to create less-than-8-bit scalar types as shown in
some of the test diffs, but it looks like the backend knows how to deal
with that in these patterns. This is the simple part of the fix suggested in:
https://bugs.llvm.org/show_bug.cgi?id=39927
Differential Revision: https://reviews.llvm.org/D55529
llvm-svn: 348862
These involve cases where certain uses are dead by means of having
no demanded bits, even though the used instruction still has demanded
bits when other uses are taken into account. BDCE currently does not
simplify such cases.
llvm-svn: 348861
Summary:
When eliminating a dead argument or return value in a function with
local linkage, all uses, including in dbg.value intrinsics, would be
replaced with null constants. This would mean that, for example for an
integer argument, the debug info would incorrectly express that the
value is 0. Instead, replace all uses with undef to indicate that the
argument/return value is optimized out.
Also, make sure that metadata uses of return values are rewritten even
if there are no non-metadata uses of the value.
As a bit of historical curiosity, the code that emitted null constants
was introduced in the initial check-in of the pass in 2003, before
'undef' values even existed in LLVM.
This fixes PR23260.
Reviewers: dblaikie, aprantl, vsk, djtodoro
Reviewed By: aprantl
Subscribers: llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D55513
llvm-svn: 348837
Summary: The comment says we need 3 extracts and a select at the end. But didn't we just account for the select in the vector cost above. Aren't we just extracting the single element after taking the min/max in the vector register?
Reviewers: RKSimon, spatel, ABataev
Reviewed By: RKSimon
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55480
llvm-svn: 348739
Currently memcpyopt optimizes cases like
memset(a, byte, N);
memcpy(b, a, M);
to
memset(a, byte, N);
memset(b, byte, M);
if M <= N. Often this allows further simplifications down the line,
which drop the first memset entirely.
This patch extends this optimization for the case where M > N, but we
know that the bytes a[N..M] are undef due to alloca/lifetime.start.
This situation arises relatively often for Rust code, because Rust does
not initialize trailing structure padding and loves to insert redundant
memcpys. This also fixes https://bugs.llvm.org/show_bug.cgi?id=39844.
For the implementation, I'm reusing a bit of code for a similar existing
optimization (direct memcpy of undef). I've also added memset support to
MemDepAnalysis GetLocation -- Instead, getPointerDependencyFrom could be
used, but it seems to make more sense to add this to GetLocation and thus
make the computation cachable.
Differential Revision: https://reviews.llvm.org/D55120
llvm-svn: 348645
The splitting pass uses its 'unlikelyExecuted' predicate to statically
decide which blocks are cold.
- Do not treat noreturn calls as if they are cold unless they are actually
marked cold. This is motivated by functions like exit() and longjmp(), which
are not beneficial to outline.
- Do not treat inline asm as an outlining barrier. In practice asm("") is
frequently used to inhibit basic block merging; enabling outlining in this case
results in substantial memory savings.
- Treat invokes of cold functions as cold.
As a drive-by, remove the 'exceptionHandlingFunctions' predicate, because it's
no longer needed. The pass can identify & outline blocks dominated by EH pads,
so there's no need to special-case __cxa_begin_catch etc.
Differential Revision: https://reviews.llvm.org/D54244
llvm-svn: 348640
Algorithm: Identify maximal cold regions and put them in a worklist. If
a candidate region overlaps with another, discard it. While the worklist
is full, remove a single-entry sub-region from the worklist and attempt
to outline it. By the non-overlap property, this should not invalidate
parts of the domtree pertaining to other outlining regions.
Testing: LNT results on X86 are clean. With test-suite + externals, llvm
outlines 134KB pre-patch, and 352KB post-patch (+ ~2.6x). The file
483.xalancbmk/src/Constants.cpp stands out as an extreme case where llvm
outlines over 100 times in some functions (mostly EH paths). There was
not a significant performance impact pre vs. post-patch.
Differential Revision: https://reviews.llvm.org/D53887
llvm-svn: 348639
We were overcounting the number of arithmetic operations needed at each level before we reach a legal type. We were using the full vector type for that level, but we are going to split the input vector at that level in half. So the effective arithmetic operation cost at that level is half the width.
So for example on 8i32 on an sse target. Were were calculating the cost of an 8i32 op which is likely 2 for basic integer. Then after the loop we count 2 more v4i32 ops. For a total arith cost of 4. But if you look at the assembly there would only be 3 arithmetic ops.
There are still more bugs in this code that I'm going to work on next. The non pairwise code shouldn't count extract subvectors in the loop. There are no extracts, the types are split in registers. For pairwise we need to use 2 two src permute shuffles.
Differential Revision: https://reviews.llvm.org/D55397
llvm-svn: 348621
DemandedBits and BDCE currently only support scalar integers. This
patch extends them to also handle vector integer operations. In this
case bits are not tracked for individual vector elements, instead a
bit is demanded if it is demanded for any of the elements. This matches
the behavior of computeKnownBits in ValueTracking and
SimplifyDemandedBits in InstCombine.
Unlike the previous iteration of this patch, getDemandedBits() can now
again be called on arbirary (sized) instructions, even if they don't
have integer or vector of integer type. (For vector types the size of the
returned mask will now be the scalar size in bits though.)
The added LoopVectorize test case shows a case which triggered an
assertion failure with the previous attempt, because getDemandedBits()
was called on a pointer-typed instruction.
Differential Revision: https://reviews.llvm.org/D55297
llvm-svn: 348602
This patch introduces a new instinsic `@llvm.experimental.widenable_condition`
that allows explicit representation for guards. It is an alternative to using
`@llvm.experimental.guard` intrinsic that does not contain implicit control flow.
We keep finding places where `@llvm.experimental.guard` is not supported or
treated too conservatively, and there are 2 reasons to that:
- `@llvm.experimental.guard` has memory write side effect to model implicit control flow,
and this sometimes confuses passes and analyzes that work with memory;
- Not all passes and analysis are aware of the semantics of guards. These passes treat them
as regular throwing call and have no idea that the condition of guard may be used to prove
something. One well-known place which had caused us troubles in the past is explicit loop
iteration count calculation in SCEV. Another example is new loop unswitching which is not
aware of guards. Whenever a new pass appears, we potentially have this problem there.
Rather than go and fix all these places (and commit to keep track of them and add support
in future), it seems more reasonable to leverage the existing optimizer's logic as much as possible.
The only significant difference between guards and regular explicit branches is that guard's condition
can be widened. It means that a guard contains (explicitly or implicitly) a `deopt` block successor,
and it is always legal to go there no matter what the guard condition is. The other successor is
a guarded block, and it is only legal to go there if the condition is true.
This patch introduces a new explicit form of guards alternative to `@llvm.experimental.guard`
intrinsic. Now a widenable guard can be represented in the CFG explicitly like this:
%widenable_condition = call i1 @llvm.experimental.widenable.condition()
%new_condition = and i1 %cond, %widenable_condition
br i1 %new_condition, label %guarded, label %deopt
guarded:
; Guarded instructions
deopt:
call type @llvm.experimental.deoptimize(<args...>) [ "deopt"(<deopt_args...>) ]
The new intrinsic `@llvm.experimental.widenable.condition` has semantics of an
`undef`, but the intrinsic prevents the optimizer from folding it early. This form
should exploit all optimization boons provided to `br` instuction, and it still can be
widened by replacing the result of `@llvm.experimental.widenable.condition()`
with `and` with any arbitrary boolean value (as long as the branch that is taken when
it is `false` has a deopt and has no side-effects).
For more motivation, please check llvm-dev discussion "[llvm-dev] Giving up using
implicit control flow in guards".
This patch introduces this new intrinsic with respective LangRef changes and a pass
that converts old-style guards (expressed as intrinsics) into the new form.
The naming discussion is still ungoing. Merging this to unblock further items. We can
later change the name of this intrinsic.
Reviewed By: reames, fedor.sergeev, sanjoy
Differential Revision: https://reviews.llvm.org/D51207
llvm-svn: 348593
The current algorithm that collects live/dead/inloop blocks relies on some invariants
related to RPO and PO traversals. In particular, the important fact it requires is that
the only loop's latch is the first block in PO traversal. It also relies on fact that during
RPO we visit all prececessors of a block before we visit this block (backedges ignored).
If a loop has irreducible non-loop cycle inside, both these assumptions may break.
This patch adds detection for this situation and prohibits the terminator folding
for loops with irreducible CFG.
We can in theory support this later, for this some algorithmic changes are needed.
Besides, irreducible CFG is not a frequent situation and we can just don't bother.
Thanks @uabelho for finding this!
Differential Revision: https://reviews.llvm.org/D55357
Reviewed By: skatkov
llvm-svn: 348567
