DW_OP_fbreg(N) DW_OP_piece(4) DW_OP_fbreg(M) DW_OP_piece(8)
DW_OP_fbreg(N) DW_OP_piece(4) DW_OP_piece(8)
The first grabs 4 bytes from FP+N followed by 8 bytes from FP+M, the second grabs 4 bytes from FP+N followed by zero filling 8 bytes which are unavailable. Of course regiters are stuff supported:
DW_OP_reg3 DW_OP_piece(4) DW_OP_reg8 DW_OP_piece(8)
The fix does the following:
1 - don't push the full piece value onto the stack, keep it on the side
2 - fill zeros for DW_OP_piece(N) opcodes that have nothing on the stack (instead of previously consuming the full piece that was pushed onto the stack)
3 - simplify the logic
<rdar://problem/16930524>
llvm-svn: 214415
i386, i486, i486sx, and i686 are all indistinguishable as far as
PE/COFF files are concerned. This patch adds support for all of
these architectures to PlatformWindows.
Differential Revision: http://reviews.llvm.org/D4658
llvm-svn: 214092
We now catch the issue with a static_assert() at compile time and use llvm::array_lengthof(g_core_definitions) as well.
<rdar://problem/17767541>
llvm-svn: 213778
See the following llvm change for details:
r213743 | tnorthover | 2014-07-23 05:32:47 -0700 (Wed, 23 Jul 2014) | 9 lines
AArch64: remove arm64 triple enumerator.
This change fixes build breaks on Linux and MacOSX lldb.
llvm-svn: 213755
GCC warns on reinterpret_cast expressions involving a void-pointer
source and a pointer-to-function destination. Take a detour through
intptr_t to silence it.
Differential Revision: http://reviews.llvm.org/D4626
llvm-svn: 213691
Platforms which don't use LLDB's built-in demangler don't use the
'mangled_length' variable. Instead, replace it's only use by an
expression it is equivalent to.
Differential Revision: http://reviews.llvm.org/D4625
llvm-svn: 213681
The new implementation is located in source/Core/FastDemangle.cpp. It’s fairly straightforward C code with a few basic C++ extensions. It should compile with little or no change on a variety of platforms, but of course it is still only useful for symbols that comply with the Itanium ABI mangling spec (plus a few Clang extensions.)
<rdar://problem/15397553> <rdar://problem/15794867>
llvm-svn: 213671
1) Preserve ref qualification state in a local variable while parsing a nested name. Previously, the state was recorded in the shared db reference and could therefore be overwritten when parsing multiple levels of nested names (e.g.: when a qualified name has qualified template args.)
2) Address an off-by-one error when testing whether or not a thunk is non-virtual. This resulted in the demangled identifying all thunks as non-virtual.
llvm-svn: 213591
This change comprises of additions and some minor changes in order that
"kalimba" is listed as a supported platform and that debugging any
kalimbas results in PlatformKalimba being associated with the target.
The changes are as follows:
* The PlatformKalimba implementation itself
* A tweak to ArchSpec
* .note parsing for Kalimba in ObjectFileELF.cpp
* Plugin registration
* Makefile additions
Change by Matthew Gardiner
Minor tweak for cmake and Xcode by Todd Fiala
Tested:
Ubuntu 14.04 x86_64, clang 3.5-built lldb, all tests pass.
MacOSX 10.9.4, Xcode 6.0 Beta 1-built lldb, all tests pass.
llvm-svn: 213158
Fixes include:
- Don't say that "<arch>-apple-ios" is compatible with "<arch>-apple-macosx"
- Fixed DynamicLoaderMacOSXDYLD so specify an architecture that was converted solely from a cputype and subtype, just specify the file + UUID.
- Fixed PlatformiOSSimulator::GetSupportedArchitectureAtIndex() so it returns the correct archs
- Fixed SymbolFileDWARFDebugMap to load .o files correctly by just specifying the architecture without the vendor and OS now that "<arch>-apple-ios" is not compatible with "<arch>-apple-macosx" so we can load .o files correctly for DWARF with debug map
- Fixed the coded in TargetList::CreateTarget() so it does the right thing with an underspecified triple where just the arch is specified.
llvm-svn: 212783
Windows does support pipes, but they do so in a slightly different way. Added a Host layer which abstracts the use of pipes into a new Pipe class that everyone can use.
Windows benefits include:
- Being able to interrupt running processes when IO is directly hooked up
- being able to interrupt long running python scripts
- being able to interrupt anything based on ConnectionFileDescriptor
llvm-svn: 212220
off_t is a type which is used for file offsets. Even more
specifically, it is only used by a limited number of C APIs that
deal with files. Any usage of off_t where the variable is not
intended to be used with one of these APIs is a bug, by definition.
This patch corrects some easy mis-uses of off_t, generally by
converting them to lldb::offset_t, but sometimes by using other
types such as size_t, when appropriate.
The use of off_t to represent these offsets has worked fine in
practice on linux-y platforms, since we used _FILE_OFFSET_64 to
guarantee that off_t was a uint64. On Windows, however,
_FILE_OFFSET_64 is unrecognized, and off_t will always be 32-bit.
So the usage of off_t on Windows actually leads to legitimate bugs.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4358
llvm-svn: 212192
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Replace adhoc inline implementation of llvm::array_lengthof in favour of the
implementation in LLVM. This is simply a cleanup change, no functional change
intended.
llvm-svn: 211868
The patch is as is with the functionality left disabled for apple vendors because of performance regressions. If this is enabled it ends up searching for symbols in all shared libraries that are loadeded.
llvm-svn: 211638
The issue was when we called Debugger::RunIOHandler(), it would run the current IOHandler by activating it, and running it and then try to pop it and exit regardless of wether it was on top or not.
The new code will push the IOHandler that was passed in, and run the IOHandlers until the one passed in is successfully popped. This allows files for the "command source" to switch input handlers:
% cat /tmp/commands
br s -S alignLeftEdges:
br command add
bt
frame var
po self
DONE
b s -n main
br command add
bt
frame var
DONE
Note above we set a breakpoint, then add commands do it. The "br command add" will push the breakpoint comment gatherer until it sees "DONE" and then pop itself off the stack. The a new breakpoint will be set and it does the same thing again.
Now this file can be sourced from the command line:
% lldb -s /tmp/commands /path/to/a.out
And your breakpoints will be correctly setup!
<rdar://problem/17081650>
llvm-svn: 211329
lldb support. I'll be doing more testing & cleanup but I wanted to
get the initial checkin done.
This adds a new SBExpressionOptions::SetLanguage API for selecting a
language of an expression.
I added adds a new SBThread::GetInfoItemByPathString for retriving
information about a thread from that thread's StructuredData.
I added a new StructuredData class for representing
key-value/array/dictionary information (e.g. JSON formatted data).
Helper functions to read JSON and create a StructuredData object,
and to print a StructuredData object in JSON format are included.
A few Cocoa / Cocoa Touch data formatters were updated by Enrico
to track changes in iOS 8 / Yosemite.
Before we query a thread's extended information, the system runtime may
provide hints to the remote debug stub that it will use to retrieve values
out of runtime structures. I added a new SystemRuntime method
AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add
key-value type data to the initial request that we send to the remote stub.
The thread-format formatter string can now retrieve values out of a thread's
extended info structured data. The default thread-format string picks up
two of these - thread.info.activity.name and thread.info.trace_messages.
I added a new "jThreadExtendedInfo" packet in debugserver; I will
add documentation to the lldb-gdb-remote.txt doc soon. It accepts
JSON formatted arguments (most importantly, "thread":threadnum) and
it returns a variety of information regarding the thread to lldb
in JSON format. This JSON return is scanned into a StructuredData
object that is associated with the thread; UI layers can query the
thread's StructuredData to see if key-values are present, and if
so, show them to the user. These key-values are likely to be
specific to different targets with some commonality among many
targets. For instance, many targets will be able to advertise the
pthread_t value for a thread.
I added an initial rough cut of "thread info" command which will print
the information about a thread from the jThreadExtendedInfo result.
I need to do more work to make this format reasonably.
Han Ming added calls into the pmenergy and pmsample libraries if
debugserver is run on Mac OS X Yosemite to get information about the
inferior's power use.
I added support to debugserver for gathering the Genealogy information
about threads, if it exists, and returning it in the jThreadExtendedInfo
JSON result.
llvm-svn: 210874
(lldb) file /bin/ls
(lldb) b malloc
(lldb) run
(lldb) process save-core /tmp/ls.core
Each ObjectFile plug-in now has the option to save core files by registering a new static callback.
llvm-svn: 210864
We preivously had two copies of ::BytesAvailable with only trivial
differences between them, and fixes have been applied to only one of
them.
Instead of duplicating the whole function, hide the FD_SET differences
behind a macro. This leaves only one small __APPLE__-specific #if
block, and fixes ^C on non-__APPLE__ platforms.
llvm-svn: 210592
Changes include:
- ObjectFileMachO can now determine if a binary is "*-apple-ios" or "*-apple-macosx" by checking the min OS and SDK load commands
- ArchSpec now says "<arch>-apple-macosx" is equivalent to "<arch>-apple-ios" since the simulator mixes and matches binaries (some from the system and most from the iOS SDK).
- Getting process inforamtion on MacOSX now correctly classifies iOS simulator processes so they have "*-apple-ios" architectures in the ProcessInstanceInfo
- PlatformiOSSimulator can now list iOS simulator processes correctly instead of showing nothing by using:
(lldb) platform select ios-simulator
(lldb) platform process list
- debugserver can now properly return "*-apple-ios" for the triple in the process info packets for iOS simulator executables
- GDBRemoteCommunicationClient now correctly passes along the triples it gets for process info by setting the OS in the llvm::Triple correctly
<rdar://problem/17060217>
llvm-svn: 209852
This fixes a number of trivial warnings in the Windows build. This is part of a larger effort to make the Windows build warning-free.
See http://reviews.llvm.org/D3914 for more details.
Change by Zachary Turner
llvm-svn: 209749
Rationale:
Pretty simply, the idea is that sometimes type names are way too long and contain way too many details for the average developer to care about. For instance, a plain ol' vector of int might be shown as
std::__1::vector<int, std::__1::allocator<....
rather than the much simpler std::vector<int> form, which is what most developers would actually type in their code
Proposed solution:
Introduce a notion of "display name" and a corresponding API GetDisplayTypeName() to return such a crafted for visual representation type name
Obviously, the display name and the fully qualified (or "true") name are not necessarily the same - that's the whole point
LLDB could choose to pick the "display name" as its one true notion of a type name, and if somebody really needs the fully qualified version of it, let them deal with the problem
Or, LLDB could rename what it currently calls the "type name" to be the "display name", and add new APIs for the fully qualified name, making the display name the default choice
The choice that I am making here is that the type name will keep meaning the same, and people who want a type name suited for display will explicitly ask for one
It is the less risky/disruptive choice - and it should eventually make it fairly obvious when someone is asking for the wrong type
Caveats:
- for now, GetDisplayTypeName() == GetTypeName(), there is no logic to produce customized display type names yet.
- while the fully-qualified type name is still the main key to the kingdom of data formatters, if we start showing custom names to people, those should match formatters
llvm-svn: 209072
