If the reference-types feature is enabled, call_indirect will explicitly
reference its corresponding function table via TABLE_NUMBER
relocations against a table symbol.
Also, as before, address-taken functions can also cause the function
table to be created, only with reference-types they additionally cause a
symbol table entry to be emitted.
Differential Revision: https://reviews.llvm.org/D90948
If the reference-types feature is enabled, call_indirect will explicitly
reference its corresponding function table via `TABLE_NUMBER`
relocations against a table symbol.
Also, as before, address-taken functions can also cause the function
table to be created, only with reference-types they additionally cause a
symbol table entry to be emitted.
We abuse the used-in-reloc flag on symbols to indicate which tables
should end up in the symbol table. We do this because unfortunately
older wasm-ld will carp if it see a table symbol.
Differential Revision: https://reviews.llvm.org/D90948
This updates InstPrinter and AsmParser for `delegate` and `catch_all`
instructions. Both will reject programs with multiple `catch_all`s per a
single `try`. And InstPrinter uses `EHInstStack` to figure out whether
to print catch label comments: It does not print catch label comments
for second `catch` or `catch_all` in a `try`.
Reviewed By: aardappel
Differential Revision: https://reviews.llvm.org/D94051
We used to require .functype immediately follows the label it sets the type of, but not all Clang output follows this rule.
Now we simply allow it on any symbol, but only assume its a function start for a defined symbol, which is simpler and more general.
Fixes (part of) https://bugs.llvm.org/show_bug.cgi?id=49036
Differential Revision: https://reviews.llvm.org/D96165
As mentioned in TODO comment, casting double to float causes NaNs to change bits.
To avoid the change, this patch adds support for single-floating-point immediate value on MachineCode.
Patch by Yuta Saito.
Differential Revision: https://reviews.llvm.org/D77384
This reverts commit 418df4a6ab35d343cc0f2608c90a73dd9b8d0ab1.
This change broke emscripten tests, I believe because it started
generating 5-byte a wide table index in the call_indirect instruction.
Neither v8 nor wabt seem to be able to handle that. The spec
currently says that this is single 0x0 byte and:
"In future versions of WebAssembly, the zero byte occurring in the
encoding of the call_indirectcall_indirect instruction may be used to
index additional tables."
So we need to revisit this change. For backwards compat I guess
we need to guarantee that __indirect_function_table is always at
address zero. We could also consider making this a single-byte
relocation with and assert if have more than 127 tables (for now).
Differential Revision: https://reviews.llvm.org/D95005
This patch changes to make call_indirect explicitly refer to the
corresponding function table, residualizing TABLE_NUMBER relocs against
it.
With this change, wasm-ld now sees all references to tables, and can
link multiple tables.
Differential Revision: https://reviews.llvm.org/D90948
This removes `exnref` type and `br_on_exn` instruction. This is
effectively NFC because most uses of these were already removed in the
previous CLs.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94041
For wasm-ld table linking work to proceed, object files should indicate
if they use an indirect function table. In the future this will be done
by the usual symbols and relocations mechanism, but until that support
lands in the linker, the presence of an `__indirect_function_table` in
the object file's import section shows that the object file needs an
indirect function table.
Prior to https://reviews.llvm.org/D91637, this condition was met by all
object files residualizing an `__indirect_function_table` import.
Since https://reviews.llvm.org/D91637, the intention has been that only
those object files needing an indirect function table would have the
`__indirect_function_table` import. However, we missed the case of
object files which use the table via `call_indirect` but which
themselves do not declare any indirect functions.
This changeset makes it so that when we lower a call to `call_indirect`,
that we ensure that a `__indirect_function_table` symbol is present and
that it will be propagated to the linker.
A followup patch will revise this mechanism to make an explicit link
between `call_indirect` and its associated indirect function table; see
https://reviews.llvm.org/D90948.
Differential Revision: https://reviews.llvm.org/D92840
This CL changes the asm syntax for section flags, making them more like ELF
(previously "passive" was the only option). Now we also allow "G" to designate
COMDAT group sections. In these sections we set the appropriate comdat flag on
function symbols, and also avoid auto-creating a new section for them.
This also adds asm-based tests for the changes D92691 to go along with
the direct-to-object tests.
Differential Revision: https://reviews.llvm.org/D92952
This is a reland of rG4564553b8d8a with a fix to the lit pipeline in
llvm/test/MC/WebAssembly/comdat.ll
This CL changes the asm syntax for section flags, making them more like ELF
(previously "passive" was the only option). Now we also allow "G" to designate
COMDAT group sections. In these sections we set the appropriate comdat flag on
function symbols, and also avoid auto-creating a new section for them.
This also adds asm-based tests for the changes D92691 to go along with
the direct-to-object tests.
Differential Revision: https://reviews.llvm.org/D92952
This adds missing `select` instruction support and block return type
support for reference types. Also refactors WebAssemblyInstrRef.td and
rearranges tests in reference-types.s. Tests don't include `exnref`
types, because we currently don't support `exnref` for `ref.null` and
the type will be removed soon anyway.
Reviewed By: tlively, sbc100, wingo
Differential Revision: https://reviews.llvm.org/D92359
This patch adds a new "heap type" operand kind to the WebAssembly MC
layer, used by ref.null. Currently the possible values are "extern" and
"func"; when typed function references come, though, this operand may be
a type index.
Note that the "heap type" production is still known as "refedtype" in
the draft proposal; changing its name in the spec is
ongoing (https://github.com/WebAssembly/reference-types/issues/123).
The register form of ref.null is still untested.
Differential Revision: https://reviews.llvm.org/D90608
Prototype the newly proposed load_lane instructions, as specified in
https://github.com/WebAssembly/simd/pull/350. Since these instructions are not
available to origin trial users on Chrome stable, make them opt-in by only
selecting them from intrinsics rather than normal ISel patterns. Since we only
need rough prototypes to measure performance right now, this commit does not
implement all the load and store patterns that would be necessary to make full
use of the offset immediate. However, the full suite of offset tests is included
to make it easy to track improvements in the future.
Since these are the first instructions to have a memarg immediate as well as an
additional immediate, the disassembler needed some additional hacks to be able
to parse them correctly. Making that code more principled is left as future
work.
Differential Revision: https://reviews.llvm.org/D89366
Adds more testing in basic-assembly.s and a new test tables.s.
Adds support to yaml reading and writing of tables as well.
Differential Revision: https://reviews.llvm.org/D88815
This adds and optional ", immutable" to the end of a `.globaltype`
declaration. I would have prefered to match the `.wat` syntax
where immutable is the default and `mut` is the signifier for
mutable globals. Sadly changing the default would break backwards
compat with existing assembly in the wild so I think its best
to stick with this approach.
Differential Revision: https://reviews.llvm.org/D87515
Rather than just saying that some feature is missing, report the exact
features to make the error message more useful and actionable.
Differential Revision: https://reviews.llvm.org/D85795
The officially specified abbreviation for WebAssembly is Wasm and the
spec explicitly calls out WASM as being an incorrect spelling. This
patch fixes a few comments and error messages to use the
spec-compliant abbreviation.
Differential Revision: https://reviews.llvm.org/D85764
This adds 4 new reloc types.
A lot of code that previously assumed any memory or offset values could be contained in a uint32_t (and often truncated results from functions returning 64-bit values) have been upgraded to uint64_t. This is not comprehensive: it is only the values that come in contact with the new relocation values and their dependents.
A new tablegen mapping was added to automatically upgrade loads/stores in the assembler, which otherwise has no way to select for these instructions (since they are indentical other than for the offset immediate). It follows a similar technique to https://reviews.llvm.org/D53307
Differential Revision: https://reviews.llvm.org/D81704
Summary:
Add a new method (tryParseRegister) that attempts to parse a register specification.
MASM allows the use of IFDEF <register>, as well as IFDEF <symbol>. To accommodate this, we make it possible to check whether a register specification can be parsed at the current location, without failing the entire parse if it can't.
Reviewers: thakis
Reviewed By: thakis
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73486
The only thing missing for basic llvm-symbolizer support is the ability on
lib/Object to get a wasm symbol's section ID, which allows sorting and
computation of the symbols' sizes.
Also, when the WasmAsmParser switches sections on new functions, also add the
section to the list of Dwarf sections if Dwarf is being generated for assembly;
this allows writing of simple tests.
Reviewers: sbc100, jhenderson, aardappel
Differential Revision: https://reviews.llvm.org/D73246
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: merge_guards_bot, luismarques, smeenai, ldionne, lenary, s.egerton, pzheng, sameer.abuasal, MaskRay, wuzish, echristo, Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
This is equivalent to the existing `import_name` and `import_module`
attributes which control the import names in the final wasm binary
produced by lld.
This maps the existing
This attribute currently requires a string rather than using the
symbol name for a couple of reasons:
1. Avoid confusion with static and dynamic linking which is
based on symbol name. Exporting a function from a wasm module using
this directive is orthogonal to both static and dynamic linking.
2. Avoids name mangling.
Differential Revision: https://reviews.llvm.org/D70520
Summary:
Renames `ExprType` to the more apt `BlockType` and adds a variant for
multivalue blocks. Currently non-void blocks are only generated at the
end of functions where the block return type needs to agree with the
function return type, and that remains true for multivalue
blocks. That invariant means that the actual signature does not need
to be stored in the block signature `MachineOperand` because it can be
inferred by `WebAssemblyMCInstLower` from the return type of the
parent function. `WebAssemblyMCInstLower` continues to lower block
signature operands to immediates when possible but lowers multivalue
signatures to function type symbols. The AsmParser and Disassembler
are updated to handle multivalue block types as well.
Reviewers: aheejin, dschuff, aardappel
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68889
llvm-svn: 374933
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Summary:
Fixes: https://bugs.llvm.org/show_bug.cgi?id=42441
Used to print:
<unknown>:0: error: Cannot represent a difference across sections
(the location was null).
Now prints:
err.s:20:3: error: Cannot represent a difference across sections
i32.const foo-bar
^
Note: I looked at adding a test for this, but I don't think it is
worth it. We're not testing error formatting in the Wasm backend :)
Reviewers: sbc100, jgravelle-google
Subscribers: dschuff, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65602
llvm-svn: 367619
A TYPE_INDEX operand (as used by call_indirect) used to be represented
by the InstPrinter as a symbol (e.g. .Ltype_index0@TYPE_INDEX) which
was a bit of a mismatch with the WasmObjectWriter which expects an
unnamed symbol, to receive the signature from and then turn into a
reloc.
There was really no good way to round-trip this information. An earlier
version of this patch tried to attach the signature information using
a .functype, but that ran into trouble when the symbol was re-emitted
without a name. Removing the name was a giant hack also.
The current version changes the assembly syntax to have an inline
signature spec for TYPEINDEX operands that is always unnamed, which
is much more elegant both in syntax and in implementation (as now the
assembler is able to follow the same path as the regular backend)
Reviewers: sbc100, dschuff, aheejin, jgravelle-google, sunfish, tlively
Subscribers: arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64758
llvm-svn: 367590
Summary:
We agreed to rename `except_ref` to `exnref` for consistency with other
reference types in
https://github.com/WebAssembly/exception-handling/issues/79. This also
renames WebAssemblyInstrExceptRef.td to WebAssemblyInstrRef.td in order
to use the file for other reference types in future.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64703
llvm-svn: 366145
Summary:
These are emitted as identifiers by the InstPrinter, so we should
parse them as such. These could potentially clash with symbols of
the same name, but that is out of our (the WebAssembly backend) control.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64770
llvm-svn: 366139
Summary:
Before, they were one category of operands which could cause
crashes in non-sensical combinations, e.g. "f32.const symbol".
Now these are forced to be an error.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64039
llvm-svn: 365351
