In function handleMFLOSlot, we may get a variable LastInstInFunction
with a value of true from function getNextMachineInstr and IInSlot may
be null which would trigger an assert.
So we need to skip this case.
Fix#118223.
- Widen v2i8, v2i16 and v2i32 vectors so they don't cast back and forth,
and make sure that instructions with correct data unit is being used.
- Handle undef indices for VSHF when lowering VECTOR_SHUFFLE (it crashes
if such index is present).
This patch is in preparation to enable setting the MachineInstr::MIFlag
flags, i.e. FrameSetup/FrameDestroy, on callee saved register
spill/reload instructions in prologue/epilogue. This eventually helps in
setting the prologue_end and epilogue_begin markers more accurately.
The DWARF Spec in "6.4 Call Frame Information" says:
The code that allocates space on the call frame stack and performs the
save
operation is called the subroutine’s prologue, and the code that
performs
the restore operation and deallocates the frame is called its epilogue.
which means the callee saved register spills and reloads are part of
prologue (a.k.a frame setup) and epilogue (a.k.a frame destruction),
respectively. And, IIUC, LLVM backend uses FrameSetup/FrameDestroy flags
to identify instructions that are part of call frame setup and
destruction.
In the trunk, while most targets consistently set
FrameSetup/FrameDestroy on save/restore call frame information (CFI)
instructions of callee saved registers, they do not consistently set
those flags on the actual callee saved register spill/reload
instructions.
I believe this patch provides a clean mechanism to set
FrameSetup/FrameDestroy flags on the actual callee saved register
spill/reload instructions as needed. And, by having default argument of
MachineInstr::NoFlags for Flags, this patch is a NFC.
With this patch, the targets have to just pass FrameSetup/FrameDestroy
flag to the storeRegToStackSlot/loadRegFromStackSlot calls from the
target derived spillCalleeSavedRegisters and restoreCalleeSavedRegisters
to set those flags on callee saved register spill/reload instructions.
Also, this patch makes it very easy to set the source line information
on callee saved register spill/reload instructions which is needed by
the DwarfDebug.cpp implementation to set prologue_end and epilogue_begin
markers more accurately.
As per DwarfDebug.cpp implementation:
prologue_end is the first known non-DBG_VALUE and non-FrameSetup
location
that marks the beginning of the function body
epilogue_begin is the first FrameDestroy location that has been seen in
the
epilogue basic block
With this patch, the targets have to just do the following to set the
source line information on callee saved register spill/reload
instructions, without hampering the LLVM's efforts to avoid adding
source line information on the artificial code generated by the
compiler.
<Foo>InstrInfo::storeRegToStackSlot() {
...
DebugLoc DL =
Flags & MachineInstr::FrameSetup ? DebugLoc() : MBB.findDebugLoc(I);
...
}
<Foo>InstrInfo::loadRegFromStackSlot() {
...
DebugLoc DL =
Flags & MachineInstr::FrameDestroy ? MBB.findDebugLoc(I) : DebugLoc();
...
}
While I understand this patch would break out-of-tree backend builds, I
think it is in the right direction.
One immediate use case that can benefit from this patch is fixing
#120553 becomes simpler.
This PR fixes operand order of `ILVOD.df` when lowering
`VECTOR_SHUFFLE`, the result was `<y[1], x[1]>` while it should be
`<x[1], y[1]>`.
* This PR is split from #123040.
Also add support for new relocation types required by debug information.
Constants have been taken from CodeView Symbolic Debug Information
Specification.
Fixes the "use after poison" issue introduced by #121516 (see
<https://github.com/llvm/llvm-project/pull/121516#issuecomment-2585912395>).
The root cause of this issue is that #121516 introduced "Called Global"
information for call instructions modeling how "Call Site" info is
stored in the machine function, HOWEVER it didn't copy the
copy/move/erase operations for call site information.
The fix is to rename and update the existing copy/move/erase functions
so they also take care of Called Global info.
With this change, targets are no longer required to put memory / strict-fp opcodes after special
`ISD::FIRST_TARGET_MEMORY_OPCODE`/`ISD::FIRST_TARGET_STRICTFP_OPCODE` markers.
This will also allow autogenerating `isTargetMemoryOpcode`/`isTargetStrictFPOpcode (#119709).
Pull Request: https://github.com/llvm/llvm-project/pull/119969
There are a number of backends (specifically AArch64, AMDGPU, Mips, and
RISCV) which contain a “TODO: make CombinerHelper methods const”
comment. This PR does just that and makes all of the CombinerHelper
methods const, removes the TODO comments and makes the associated
instances const. This change makes some sense because the CombinerHelper
class simply modifies the state of _other_ objects to which it holds
pointers or references.
Note that AMDGPU contains an identical comment for an instance of
AMDGPUCombinerHelper (a subclass of CombinerHelper). I deliberately
haven’t modified the methods of that class in order to limit the scope
of the change. I’m happy to do so either now or as a follow-up.
I want to use this function for GISel too so Type * is a better common
interface. All of the callers already convert EVT to Type * as needed
by calling lowering anyway.
This PR fixes a bug introduced by #110199, which causes any half float
argument to crash the compiler on MIPS64.
Currently compiling this bit of code with `llc -mtriple=mips64`:
```
define void @half_args(half %a) nounwind {
entry:
ret void
}
```
Crashes with the following log:
```
LLVM ERROR: unable to allocate function argument #0
PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace.
Stack dump:
0. Program arguments: llc -mtriple=mips64
1. Running pass 'Function Pass Manager' on module '<stdin>'.
2. Running pass 'MIPS DAG->DAG Pattern Instruction Selection' on function '@half_args'
#0 0x000055a3a4013df8 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x32d0df8)
#1 0x000055a3a401199e llvm::sys::RunSignalHandlers() (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x32ce99e)
#2 0x000055a3a40144a8 SignalHandler(int) Signals.cpp:0:0
#3 0x00007f00bde558c0 __restore_rt libc_sigaction.c:0:0
#4 0x00007f00bdea462c __pthread_kill_implementation ./nptl/pthread_kill.c:44:76
#5 0x00007f00bde55822 gsignal ./signal/../sysdeps/posix/raise.c:27:6
#6 0x00007f00bde3e4af abort ./stdlib/abort.c:81:7
#7 0x000055a3a3f80e3c llvm::report_fatal_error(llvm::Twine const&, bool) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x323de3c)
#8 0x000055a3a2e20dfa (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x20dddfa)
#9 0x000055a3a2a34e20 llvm::MipsTargetLowering::LowerFormalArguments(llvm::SDValue, unsigned int, bool, llvm::SmallVectorImpl<llvm::ISD::InputArg> const&, llvm::SDLoc const&, llvm::SelectionDAG&, llvm::SmallVectorImpl<llvm::SDValue>&) const MipsISelLowering.cpp:0:0
#10 0x000055a3a3d896a9 llvm::SelectionDAGISel::LowerArguments(llvm::Function const&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x30466a9)
#11 0x000055a3a3e0b3ec llvm::SelectionDAGISel::SelectAllBasicBlocks(llvm::Function const&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x30c83ec)
#12 0x000055a3a3e09e21 llvm::SelectionDAGISel::runOnMachineFunction(llvm::MachineFunction&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x30c6e21)
#13 0x000055a3a2aae1ca llvm::MipsDAGToDAGISel::runOnMachineFunction(llvm::MachineFunction&) MipsISelDAGToDAG.cpp:0:0
#14 0x000055a3a3e07706 llvm::SelectionDAGISelLegacy::runOnMachineFunction(llvm::MachineFunction&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x30c4706)
#15 0x000055a3a3051ed6 llvm::MachineFunctionPass::runOnFunction(llvm::Function&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x230eed6)
#16 0x000055a3a35a3ec9 llvm::FPPassManager::runOnFunction(llvm::Function&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x2860ec9)
#17 0x000055a3a35ac3b2 llvm::FPPassManager::runOnModule(llvm::Module&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x28693b2)
#18 0x000055a3a35a499c llvm::legacy::PassManagerImpl::run(llvm::Module&) (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x286199c)
#19 0x000055a3a262abbb main (/home/davide/Ps2/rps2-tools/prefix/bin/llc+0x18e7bbb)
#20 0x00007f00bde3fc4c __libc_start_call_main ./csu/../sysdeps/nptl/libc_start_call_main.h:74:3
#21 0x00007f00bde3fd05 call_init ./csu/../csu/libc-start.c:128:20
#22 0x00007f00bde3fd05 __libc_start_main@GLIBC_2.2.5 ./csu/../csu/libc-start.c:347:5
#23 0x000055a3a2624921 _start /builddir/glibc-2.39/csu/../sysdeps/x86_64/start.S:117:0
```
This is caused by the fact that after the change, `f16`s are no longer
lowered as `f32`s in calls.
Two possible fixes are available:
- Update calling conventions to properly support passing `f16` as
integers.
- Update `useFPRegsForHalfType()` to return `true` so that `f16` are
still kept in `f32` registers, as before #110199.
This PR implements the first solution to not introduce any more ABI
changes as #110199 already did.
As of what is the correct ABI for halfs, I don't think there is a
correct answer. GCC doesn't support halfs on MIPS, and I couldn't find
any information on old MIPS ABI manuals either.
Resolves a FIXME and avoids needing to workaround #116075.
Adding parentheses around the (vsplat_imm_eq_1) fixes the error cited in
the FIXME by changing the ComplexPattern from a leaf node to an
operator.
The implementaton of methods only vary by what arguments they pass to
selectVSplatCommon.
Turn selectVSplatCommon into a virtual function and use template methods
in the base class to pass the immediate size.
Following discussions in #110443, and the following earlier discussions
in https://lists.llvm.org/pipermail/llvm-dev/2017-October/117907.html,
https://reviews.llvm.org/D38482, https://reviews.llvm.org/D38489, this
PR attempts to overhaul the `TargetMachine` and `LLVMTargetMachine`
interface classes. More specifically:
1. Makes `TargetMachine` the only class implemented under
`TargetMachine.h` in the `Target` library.
2. `TargetMachine` contains target-specific interface functions that
relate to IR/CodeGen/MC constructs, whereas before (at least on paper)
it was supposed to have only IR/MC constructs. Any Target that doesn't
want to use the independent code generator simply does not implement
them, and returns either `false` or `nullptr`.
3. Renames `LLVMTargetMachine` to `CodeGenCommonTMImpl`. This renaming
aims to make the purpose of `LLVMTargetMachine` clearer. Its interface
was moved under the CodeGen library, to further emphasis its usage in
Targets that use CodeGen directly.
4. Makes `TargetMachine` the only interface used across LLVM and its
projects. With these changes, `CodeGenCommonTMImpl` is simply a set of
shared function implementations of `TargetMachine`, and CodeGen users
don't need to static cast to `LLVMTargetMachine` every time they need a
CodeGen-specific feature of the `TargetMachine`.
5. More importantly, does not change any requirements regarding library
linking.
cc @arsenm @aeubanks
Some targets (e.g. PPC and Hexagon) already did this. I think it's best
to do this consistently so that frontend authors don't run into
inconsistent results when they emit `naked` functions. For example, in
Zig, we had to change our emit code to also set `frame-pointer=none` to
get reliable results across targets.
Note: I don't have commit access.
Fix issue1: In mips1-4, require a minimum of 2 instructions between a
mflo/mfhi and the next mul/dmult/div/ddiv/divu/ddivu instruction.
Fix issue2: In mips1-4, should not put mflo into the delay slot for the
return.
Fix https://github.com/llvm/llvm-project/issues/81291
This adds support for:
* `muslabin32` (MIPS N32)
* `muslabi64` (MIPS N64)
* `muslf32` (LoongArch ILP32F/LP64F)
* `muslsf` (LoongArch ILP32S/LP64S)
As we start adding glibc/musl cross-compilation support for these
targets in Zig, it would make our life easier if LLVM recognized these
triples. I'm hoping this'll be uncontroversial since the same has
already been done for `musleabi`, `musleabihf`, and `muslx32`.
I intentionally left out a musl equivalent of `gnuf64` (LoongArch
ILP32D/LP64D); my understanding is that Loongson ultimately settled on
simply `gnu` for this much more common case, so there doesn't *seem* to
be a particularly compelling reason to add a `muslf64` that's basically
deprecated on arrival.
Note: I don't have commit access.
We encountered this problem in Zig, causing all of our
`mips(el)-linux-gnueabi*` tests to fail:
https://github.com/ziglang/zig/issues/21215
For these unusual cases, let's just bail in `MipsFastISel` since
`MipsTargetLowering` can handle them fine.
Note: I don't have commit access.
… instructions.
This is a fix I stumbled upon while working on something else. I decided
to break it out since it seems like a good "first issue" to submit. I
updated the comments in the "wrong error" test files to indicate that
the messages are no longer incorrect, but I left the names of the test
files alone. I was not sure what to do with those, so I would appreciate
thoughts or guidance.
MIPSr6 has max.s/max.d/min.s/min.d instructions, which can be used as
fcanonicalize.
For pre-R6, we have no instructions that can fcanonicalize an float, so
let's use `fadd Y,X,X` to quiet it if it is NaN.
IEEE754-2008 requires that the result of general-computational and
quiet-computational operation shouldn't be signal NaN.
The renamable flag is useful during MachineCopyPropagation but renamable
flag will be dropped after lowerCopy in some case.
This patch introduces extra arguments to pass the renamable flag to
copyPhysReg.
