Recent upstream trends have moved away from explicitly using `-verify-machineinstrs`, as it's already covered by the expensive checks. This PR removes almost all `-verify-machineinstrs` from tests in `llvm/test/CodeGen/AMDGPU/*.ll`, leaving only those tests where its removal currently causes failures.
For the majority of cases, this is a neutral or positive change.
There are even testcases that greatly benefit from it, but some regressions are possible.
There is #140040 for GlobalISel that'd need to be fixed but it's only a one instruction regression and I think it can be fixed later.
Solves #64591
This is a NFC patch.
This patch run a bulk update on CodeGen tests that are impacted by the
true16 features. This patch applies:
1. duplicate GFX11plus runlines and apply them with
"+mattr=+real-true16" and "+mattr=-real-true16"
2. update the test with the update script
For some GISEL runlines, the current CodeGen do not fully support the
true16 version. Still update the runlines, but comment out the failing
one, and added a "FIXME-TRUE16" comment to that test for easier
tracking. These test will be fixed in the following patches.
This is in a transition state that we support both
"+real-true16/-real-true16" in our code base. We plan to move to
"+real-true16" as default, and finally remove "-real-true16" mode and
test lines.
The increase in fallbacks that was previously reported were not caused
by this change.
Original description:
This matches InstCombine and DAGCombine.
RISC-V only has an ADDI instruction so without this we need additional
patterns to do the conversion.
Some of the AMDGPU tests look like possible regressions. Maybe some
patterns from isel aren't imported.
This matches InstCombine and DAGCombine.
RISC-V only has an ADDI instruction so without this we need additional
patterns to do the conversion.
Some of the AMDGPU tests look like possible regressions. Maybe some
patterns from isel aren't imported.
MSG_DEALLOC_VGPRS slows down very small waveslot limited kernels. It's
been identified this message is only really needed for VGPR limited
kernels. A kernel becomes VGPR limited if a total number of VGPRs per
SIMD / number of used VGPRs is more than a number of wave slots.
trunc (binop X, C) --> binop (trunc X, trunc C) --> binop (trunc X, C`)
Try to narrow the width of math or bitwise logic instructions by pulling
a truncate ahead of binary operators.
Vx and Nx cores consider 32-bit and 64-bit basic arithmetic equal in
costs.
This reverts commit adaff46d087799072438dd744b038e6fd50a2d78.
Drop the -O3 checks from default-attributes.hip. I don't know why they
are different on some bots but reverting this is far too disruptive.
Removing it from the codegen pipeline induces a lot of test churn
because llc is no longer optimizing out implicit arguments to kernels.
Mostly mechanical, but there are some creative test updates. I preferred
to take the changes as-is in tests where the ABI isn't relevant. In
cases where it's more relevant, or the optimize out logic was too
ingrained in the test, I pre-run the optimization. Some cases manually
add attributes to disable inputs.
Remove LSH transform and restore previous lowering.
Fixes conformance issue in
[77615](https://github.com/llvm/llvm-project/pull/77615) where OpenCL
integer_ops tests fail for integer_clz.
Co-authored-by: Leon Clark <leoclark@amd.com>
Add custom lowering for ctlz.i8 to avoid multiple add/sub operations.
---------
Co-authored-by: Leon Clark <leoclark@amd.com>
Co-authored-by: Matt Arsenault <Matthew.Arsenault@amd.com>
Similar to 806761a7629df268c8aed49657aeccffa6bca449.
For IR files without a target triple, -mtriple= specifies the full
target triple while -march= merely sets the architecture part of the
default target triple, leaving a target triple which may not make sense,
e.g. amdgpu-apple-darwin.
Therefore, -march= is error-prone and not recommended for tests without
a target triple. The issue has been benign as we recognize
$unknown-apple-darwin as ELF instead of rejecting it outrightly.
This patch changes AMDGPU tests to not rely on the default
OS/environment components. Tests that need fixes are not changed:
```
LLVM :: CodeGen/AMDGPU/fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fabs.ll
LLVM :: CodeGen/AMDGPU/floor.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.ll
LLVM :: CodeGen/AMDGPU/r600-infinite-loop-bug-while-reorganizing-vector.ll
LLVM :: CodeGen/AMDGPU/schedule-if-2.ll
```
Add GFX11 test coverage to a bunch of tests where it was easy to do so,
mostly because the checks are autogenerated and/or GFX11 can share the
same checks as GFX10.
Differential Revision: https://reviews.llvm.org/D129295
Previously SIFoldOperands::foldInstOperand would only fold a
non-inlinable immediate into a single user, so as not to increase code
size by adding the same 32-bit literal operand to many instructions.
This patch removes that restriction, so that a non-inlinable immediate
will be folded into any number of users. The rationale is:
- It reduces the number of registers used for holding constant values,
which might increase occupancy. (On the other hand, many of these
registers are SGPRs which no longer affect occupancy on GFX10+.)
- It reduces ALU stalls between the instruction that loads a constant
into a register, and the instruction that uses it.
- The above benefits are expected to outweigh any increase in code size.
Differential Revision: https://reviews.llvm.org/D114643
Using a BufferSize of one for memory ProcResources will result in better
ILP since it more accurately models the dependencies between memory ops
and their consumers on an in-order processor. After this change, the
scheduler will treat the data edges from loads as blocking so that
stalls are guaranteed when waiting for data to be retreaved from memory.
Since we don't actually track waitcnt here, this should do a better job
at modeling their behavior.
Practically, this means that the scheduler will trigger the 'STALL'
heuristic more often.
This type of change needs to be evaluated experimentally. Preliminary
results are positive.
Fixes: SWDEV-282962
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D114777
Description: This change enables the compare operations to be selected to SALU/VALU form
dependent of the SDNode divergence flag.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D106079
We can improve on the generic splitting by using ffbh/ffbl, which have a
defined result when the input is zero.
Differential Revision: https://reviews.llvm.org/D107442
the compilation time and there is no case for which we see any improvement in
performance. This patch removes this pass and its associated test cases from
the tree.
Differential Revision: https://reviews.llvm.org/D101313
Change-Id: I0599169a7609c19a887f8d847a71e664030cc141
Support for XNACK and SRAMECC is not static on some GPUs. We must be able
to differentiate between different scenarios for these dynamic subtarget
features.
The possible settings are:
- Unsupported: The GPU has no support for XNACK/SRAMECC.
- Any: Preference is unspecified. Use conservative settings that can run anywhere.
- Off: Request support for XNACK/SRAMECC Off
- On: Request support for XNACK/SRAMECC On
GCNSubtarget will track the four options based on the following criteria. If
the subtarget does not support XNACK/SRAMECC we say the setting is
"Unsupported". If no subtarget features for XNACK/SRAMECC are requested we
must support "Any" mode. If the subtarget features XNACK/SRAMECC exist in the
feature string when initializing the subtarget, the settings are "On/Off".
The defaults are updated to be conservatively correct, meaning if no setting
for XNACK or SRAMECC is explicitly requested, defaults will be used which
generate code that can be run anywhere. This corresponds to the "Any" setting.
Differential Revision: https://reviews.llvm.org/D85882
Change waitcnt insertion to check the memory operand tokens to see if
flat memory operations access VMEM in the same way it does to check if
accessing LDS. This avoids adding waitcnt for counters for address
spaces that are not accessed.
In addition, only generate the pessimistic waitcnt 0 if a flat memory
operation appears to access both VMEM and LDS.
This benefits flat memory operations that explicitly specify the
address space as GLOBAL or LOCAL.
Differential Revision: https://reviews.llvm.org/D89618
Fix 64-bit copy to SCC by restricting the pattern resulting
in such a copy to subtargets supporting 64-bit scalar compare,
and mapping the copy to S_CMP_LG_U64.
Before introducing the S_CSELECT pattern with explicit SCC
(0045786f146e78afee49eee053dc29ebc842fee1), there was no need
for handling 64-bit copy to SCC ($scc = COPY sreg_64).
The proposed handling to read only the low bits was however
based on a false premise that it is only one bit that matters,
while in fact the copy source might be a vector of booleans and
all bits need to be considered.
The practical problem of mapping the 64-bit copy to SCC is that
the natural instruction to use (S_CMP_LG_U64) is not available
on old hardware. Fix it by restricting the problematic pattern
to subtargets supporting the instruction (hasScalarCompareEq64).
Differential Revision: https://reviews.llvm.org/D85207
tryLatency compares two sched candidates. For the top zone it prefers
the one with lesser depth, but only if that depth is greater than the
total latency of the instructions we've already scheduled -- otherwise
its latency would be hidden and there would be no stall.
Unfortunately it only tests the depth of one of the candidates. This can
lead to situations where the TopDepthReduce heuristic does not kick in,
but a lower priority heuristic chooses the other candidate, whose depth
*is* greater than the already scheduled latency, which causes a stall.
The fix is to apply the heuristic if the depth of *either* candidate is
greater than the already scheduled latency.
All this also applies to the BotHeightReduce heuristic in the bottom
zone.
Differential Revision: https://reviews.llvm.org/D72392
Summary:
Add patterns to select s_cselect in the isel.
Handle more cases of implicit SCC accesses in si-fix-sgpr-copies
to allow new patterns to work.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, asbirlea, kerbowa, llvm-commits
Tags: #llvm
Re-commit D81925 with a bugfix D82370.
Differential Revision: https://reviews.llvm.org/D81925
Differential Revision: https://reviews.llvm.org/D82370
Summary:
Add patterns to select s_cselect in the isel.
Handle more cases of implicit SCC accesses in si-fix-sgpr-copies
to allow new patterns to work.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, asbirlea, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81925
Summary:
pickNodeBidirectional tried to compare the best top candidate and the
best bottom candidate by examining TopCand.Reason and BotCand.Reason.
This is unsound because, after calling pickNodeFromQueue, Cand.Reason
does not reflect the most important reason why Cand was chosen. Rather
it reflects the most recent reason why it beat some other potential
candidate, which could have been for some low priority tie breaker
reason.
I have seen this cause problems where TopCand is a good candidate, but
because TopCand.Reason is ORDER (which is very low priority) it is
repeatedly ignored in favour of a mediocre BotCand. This is not how
bidirectional scheduling is supposed to work.
To fix this I changed the code to always compare TopCand and BotCand
directly, like the generic implementation of pickNodeBidirectional does.
This removes some uncommented AMDGPU-specific logic; if this logic turns
out to be important then perhaps it could be moved into an override of
tryCandidate instead.
Graphics shader benchmarking on gfx10 shows a lot more positive than
negative effects from this change.
Reviewers: arsenm, tstellar, rampitec, kzhuravl, vpykhtin, dstuttard, tpr, atrick, MatzeB
Subscribers: jvesely, wdng, nhaehnle, yaxunl, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68338
