This was committed at r297155 and reverted at r297166 because of an
over-reaching clang test. That should be fixed with r297189.
This is one part of solving a recent bug report:
http://lists.llvm.org/pipermail/llvm-dev/2017-February/110293.html
This keeps with our general approach: changing arbitrary shuffles is off-limts,
but changing splat is ok. The transform is very similar to the existing
shrinkBitwiseLogic() canonicalization.
Differential Revision: https://reviews.llvm.org/D30123
llvm-svn: 297232
Summary:
When InstCombine is optimizing certain select-cmp-br patterns
it replaces the result of the select in uses outside of the
basic block containing the select. This is only legal if the
path from the select to the outside use is disjoint from all
other paths out from the originating basic block.
The problem found was that InstCombiner::replacedSelectWithOperand
did not consider the case when both edges out from the br pointed
to the same label. In that case the paths aren't disjoint and the
transformation is illegal. This patch avoids the faulty rewrites
by verifying that there is a single flow to the successor where
we want to replace uses.
Reviewers: llvm-commits, spatel, majnemer
Differential Revision: https://reviews.llvm.org/D30455
llvm-svn: 296752
Summary:
Solves PR 31990.
The bad rewrite could replace a memcpy of one word with
store i4 -1
while it should actually be
store i8 -1
Hopefully opt and llc has improved enough so the original optimization
done by the code isn't needed anymore.
One already existing testcase is affected. It originally tested that
the memcpy was replaced with
load double
but since we now remove that rewrite it will be
load i64
instead.
Patch suggestion by Eli Friedman.
Reviewers: eli.friedman, majnemer, efriedma
Reviewed By: efriedma
Subscribers: efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D30254
llvm-svn: 296585
This optimisation was crashing when there was a chain of more than one bitcast
instruction to replace, as a result of the changes in D27283.
Patch by James Price.
Differential Revision: https://reviews.llvm.org/D30347
llvm-svn: 296163
This one seems more obvious than D30270 that it can't make improvements because an extension always needs
all of the incoming bits. There's one specific transform in SimplifyDemandedInstructionBits of converting
a sext to a zext when the sign-bit is known zero, but that is handled explicitly in visitSext() with
ComputeSignBit().
Like D30270, there are no IR differences (other than instruction names) for the case in PR32037:
https://bugs.llvm.org//show_bug.cgi?id=32037
...and no regression test differences.
Zext/sext are a smaller part of the profile, but this still appears to shave off another 0.5% or so from
'opt -O2'.
Differential Revision: https://reviews.llvm.org/D30280
llvm-svn: 296129
Notably, no regression tests change when we remove these calls, and these are expensive calls.
The motivation comes from the general acknowledgement that the compiler is getting slower:
http://lists.llvm.org/pipermail/llvm-dev/2017-January/109188.htmlhttp://lists.llvm.org/pipermail/llvm-dev/2016-December/108279.html
And specifically the test case attached to PR32037:
https://bugs.llvm.org//show_bug.cgi?id=32037
Profiling the middle-end (opt) part of the compile:
$ ./opt -O2 row_common.bc -o /dev/null
...visitAdd and visitSub are near the top of the instcombine list, and the calls to SimplifyDemandedInstructionBits()
are high within each of those. Those calls account for 1%+ of the opt time in either debug or release profiles. And
that's the rough win I see from this patch when testing opt built release from r295864 on an iMac with Haswell 4GHz
(model 4790K).
It seems unlikely that we'd be able to eliminate add/sub or change their operands given that add/sub normally affect
all bits, and the PR32037 example shows no IR difference after this change using -O2.
Also worth noting - the code comment in visitAdd:
// This handles stuff like (X & 254)+1 -> (X&254)|1
...isn't true. That transform is handled later with a call to haveNoCommonBitsSet().
Differential Revision: https://reviews.llvm.org/D30270
llvm-svn: 295898
This is part of trying to clean up our handling of min/max patterns in IR.
By converting these to canonical form, we're more likely to recognize them
because there are various places in InstCombine that don't use
matchSelectPattern or m_SMax and friends.
The backend fixups referenced in the now deleted TODO comment were added with:
https://reviews.llvm.org/rL291392https://reviews.llvm.org/rL289738
If there's any codegen fallout from this change, we should be able to address
it in DAGCombiner or target-specific lowering.
llvm-svn: 295758
Summary:
This is a fix for assertion failure in
`getInverseMinMaxSelectPattern` when ABS is passed in as a select pattern.
We should not be invoking the simplification rule for
ABS(MIN(~ x,y))) or ABS(MAX(~x,y)) combinations.
Added a test case which would cause an assertion failure without the patch.
Reviewers: sanjoy, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30051
llvm-svn: 295719
Changing to 'or' (rather than 'xor' when no wrapping flags are set)
allows icmp simplifies to happen as expected.
Differential Revision: https://reviews.llvm.org/D29729
llvm-svn: 295574
This is necessary to avoid warnings from GCC.
InstCombineLoadStoreAlloca.cpp:238:7: error: 'PointerReplacer' declared
with greater visibility than the type of its field 'PointerReplacer::IC'
llvm-svn: 294794
For function-scope variables with large initialisation list, FE usually
generates a global variable to hold the initializer, then generates
memcpy intrinsic to initialize the alloca. InstCombiner::visitAllocaInst
identifies such allocas which are accessed only by reading and replaces
them with the global variable. This is done by casting the global variable
to the type of the alloca and replacing all references.
However, when the global variable is in a different address space which
is disjoint with addr space 0 (e.g. for IR generated from OpenCL,
global variable cannot be in private addr space i.e. addr space 0), casting
the global variable to addr space 0 results in invalid IR for certain
targets (e.g. amdgpu).
To fix this issue, when the global variable is not in addr space 0,
instead of casting it to addr space 0, this patch chases down the uses
of alloca until reaching the load instructions, then replaces load from
alloca with load from the global variable. If during the chasing
bitcast and GEP are encountered, new bitcast and GEP based on the global
variable are generated and used in the load instructions.
Differential Revision: https://reviews.llvm.org/D27283
llvm-svn: 294786
This fold already existed for vectors but only when 'C1' was a splat
constant (but 'C2' could be any constant).
There were no tests for any vector constants, so I'm adding a test
that shows non-splat constants for both operands.
llvm-svn: 294650
This patch is based on the llvm-dev discussion here:
http://lists.llvm.org/pipermail/llvm-dev/2017-January/109631.html
Folding to i1 should always be desirable because that's better for value tracking
and we have special folds for i1 types.
I checked for other users of shouldChangeType() where this might have an effect,
but we already handle the i1 case differently than other types in all of those cases.
Side note: the default datalayout includes i1, so it seems we only find this gap in
shouldChangeType + phi folding for the case when there is (1) an explicit datalayout
without i1, (2) casting to i1 from a legal type, and (3) a phi with exactly 2 incoming
casted operands (as Björn mentioned).
Differential Revision: https://reviews.llvm.org/D29336
llvm-svn: 294066
The code comments didn't match the code logic, and we didn't actually distinguish the fake unary (not/neg/fneg)
operators from arguments. Adding another level to the weighting scheme provides more structure and can help
simplify the pattern matching in InstCombine and other places.
I fixed regressions that would have shown up from this change in:
rL290067
rL290127
But that doesn't mean there are no pattern-matching logic holes left; some combines may just be missing regression tests.
Should fix:
https://llvm.org/bugs/show_bug.cgi?id=28296
Differential Revision: https://reviews.llvm.org/D27933
llvm-svn: 294049
Although this is 'no-functional-change-intended', I'm adding tests
for shl-shl and lshr-lshr pairs because there is no existing test
coverage for those folds.
It seems like we should be able to remove some code from foldShiftedShift()
at this point because we're handling those patterns on the general path.
llvm-svn: 293814
Summary:
If there are two adjacent guards with different conditions, we can
remove one of them and include its condition into the condition of
another one. This patch allows InstCombine to merge them by the
following pattern:
guard(a); guard(b) -> guard(a & b).
Reviewers: reames, apilipenko, igor-laevsky, anna, sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29378
llvm-svn: 293778
transformToIndexedCompare
If they don't have the same type, the size of the constant
index would need to be adjusted (and this wouldn't be always
possible).
Alternatively we could try the analysis with the initial
RHS value, which would guarantee that the two sides have
the same type. However it is unlikely that in practice this
would pass our transformation requirements.
Fixes PR31808 (https://llvm.org/bugs/show_bug.cgi?id=31808).
llvm-svn: 293629
